hw-test/scripts/test-batch

100 lines
2.3 KiB
Bash
Executable file

#!/bin/bash
source scan-dmidecode
source test-variables
#rm -f /output/hwtests/*/netdev/*.ethtool
#source scan-netdev
echo $$ > /run/batch.pid
#scan-bonding
#echo -n "setup-netdev... "
#setup-netdev
#sleep 1
#jobs
#disown
#stat-bonding out > $OUTPUT_DIR/stat-bonding.pre.1.out
#test-bonding
#stat-bonding out > $OUTPUT_DIR/stat-bonding.post.1.out
#screen -dmS test-fio test-fio-sequential
# Take snapshot
#mkdir -p $SNAPSHOT_D
#cp -af $OUTPUT_DIR/* $SNAPSHOT_D/
# 2017-02-23 migracion de espacio de direcciones
#vgscan
#vgchange -ay rhel
#mkdir /mnt/sysimage
#mount /dev/rhel/root /mnt/sysimage
#touch /mnt/sysimage/.autorelabel
#mkdir /mnt/sysimage/bak
#cp -avf /mnt/sysimage/etc/hosts /mnt/sysimage/bak/
#cp -avf /mnt/sysimage/etc/sysconfig/network-scripts /mnt/sysimage/bak/
#cd /mnt/sysimage/etc/sysconfig/network-scripts
#cp -af /mnt/sysimage/bak/network-scripts/ifcfg-* ./
#
#cat > ifcfg-bond0 << EOF
#DEVICE=bond0
#BONDING_OPTS='mode=1 miimon=100'
#PREFIX=22
#GATEWAY=172.30.75.254
#ONBOOT=yes
#MTU=1500
#NM_CONTROLLED=no
#IPV6INIT=no
#EOF
#
#cat ifcfg-enp2s0f1 \
# | grep IPADDR >> ifcfg-bond0
#
#cat > ifcfg-enp2s0f0 << EOF
#DEVICE=enp2s0f0
#Type=Ethernet
#BOOTPROTO=none
#ONBOOT=yes
#MASTER=bond0
#SLAVE=yes
#NM_CONTROLLED=no
#ETHTOOL_OPTS="autoneg off speed 1000 duplex full"
#EOF
#
#cat > ifcfg-enp2s0f1 << EOF
#DEVICE=enp2s0f1
#MASTER=bond0
#SLAVE=yes
#ONBOOT=yes
#MTU=1500
#NM_CONTROLLED=no
#IPV6INIT=no
#ETHTOOL_OPTS="autoneg off speed 1000 duplex full"
#EOF
#
#for CFG in ifcfg-* ; do
# sed -i 's/PREFIX=24/PREFIX=22/' $CFG
# sed -i 's/PREFIX=.24./PREFIX=22/' $CFG
# sed -i 's/255.255.255.0/255.255.252.0/' $CFG
# sed -i 's/10.129.146.254/10.129.159.254/' $CFG
# sed -i 's/10.129.146/10.129.156/' $CFG
# sed -i 's/10.129.145.254/10.129.155.254/' $CFG
# sed -i 's/10.129.145/10.129.152/' $CFG
# sed -i 's/10.129.144.254/10.129.147.254/' $CFG
# sed -i 's/10.129.144/10.129.144/' $CFG
# sed -i 's/172.30.73.254/172.30.83.254/' $CFG
# sed -i 's/172.30.73/172.30.80/' $CFG
# sed -i 's/172.30.72.254/172.30.79.254/' $CFG
# sed -i 's/172.30.72/172.30.76/' $CFG
# sed -i 's/172.30.71.254/172.30.75.254/' $CFG
# sed -i 's/172.30.71/172.30.72/' $CFG
# sed -i '/IPADDR/ s/\.64/\.151/' $CFG
# sed -i '/IPADDR/ s/\.65/\.152/' $CFG
# sed -i '/IPADDR/ s/\.66/\.153/' $CFG
# sed -i '/IPADDR/ s/\.67/\.154/' $CFG
#
#done
rm -f /run/batch.pid
#echo '--'