2016-04-02 13:17:22 -05:00
|
|
|
/* -*- Mode: C; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4; fill-column: 100 -*- */
|
|
|
|
/*
|
|
|
|
* This Source Code Form is subject to the terms of the Mozilla Public
|
|
|
|
* License, v. 2.0. If a copy of the MPL was not distributed with this
|
|
|
|
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
|
|
|
|
*/
|
|
|
|
/*
|
2016-04-12 04:00:33 -05:00
|
|
|
* This is a very tiny helper to allow overlay mounting.
|
2016-04-02 13:17:22 -05:00
|
|
|
*/
|
|
|
|
|
2017-12-21 04:44:49 -06:00
|
|
|
#include <config.h>
|
2017-03-08 10:38:22 -06:00
|
|
|
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
#include <stdio.h>
|
|
|
|
#include <errno.h>
|
2016-04-02 13:17:22 -05:00
|
|
|
#include <sys/mount.h>
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
#include <sys/stat.h>
|
2020-11-25 04:40:58 -06:00
|
|
|
#include <sysexits.h>
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
#include <unistd.h>
|
2016-04-02 13:17:22 -05:00
|
|
|
|
2020-11-25 04:40:58 -06:00
|
|
|
#include <security.h>
|
|
|
|
|
2020-11-08 09:46:38 -06:00
|
|
|
#ifdef __FreeBSD__
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <sys/uio.h>
|
|
|
|
|
|
|
|
#define MOUNT mount_wrapper
|
|
|
|
#define MS_MGC_VAL 0
|
|
|
|
#define MS_SILENT 0
|
|
|
|
#define MS_NODEV 0
|
|
|
|
#define MS_UNBINDABLE 0
|
|
|
|
#define MS_BIND 1
|
|
|
|
#define MS_REC 2
|
|
|
|
#define MS_REMOUNT 4
|
|
|
|
#define MS_NOATIME 8
|
|
|
|
#define MS_NOSUID 16
|
|
|
|
#define MS_RDONLY 32
|
|
|
|
|
|
|
|
void
|
|
|
|
build_iovec(struct iovec **iov, int *iovlen, const char *name, const void *val,
|
|
|
|
size_t len)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (*iovlen < 0)
|
|
|
|
return;
|
|
|
|
i = *iovlen;
|
|
|
|
*iov = reinterpret_cast<struct iovec*>(realloc(*iov, sizeof **iov * (i + 2)));
|
|
|
|
if (*iov == NULL) {
|
|
|
|
*iovlen = -1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
(*iov)[i].iov_base = strdup(name);
|
|
|
|
(*iov)[i].iov_len = strlen(name) + 1;
|
|
|
|
i++;
|
|
|
|
(*iov)[i].iov_base = const_cast<void*>(val);
|
|
|
|
if (len == (size_t)-1) {
|
|
|
|
if (val != NULL)
|
|
|
|
len = strlen(reinterpret_cast<const char*>(val)) + 1;
|
|
|
|
else
|
|
|
|
len = 0;
|
|
|
|
}
|
|
|
|
(*iov)[i].iov_len = (int)len;
|
|
|
|
*iovlen = ++i;
|
|
|
|
}
|
|
|
|
|
|
|
|
int mount_wrapper(const char *source, const char *target,
|
|
|
|
const char *filesystemtype, unsigned long mountflags,
|
|
|
|
const void *data)
|
|
|
|
{
|
2021-04-24 03:35:54 -05:00
|
|
|
struct iovec *iov = NULL;
|
|
|
|
int iovlen = 0;
|
2020-11-08 09:46:38 -06:00
|
|
|
int freebsd_flags = 0;
|
|
|
|
(void)data;
|
|
|
|
|
|
|
|
if(mountflags & MS_BIND)
|
|
|
|
filesystemtype = "nullfs";
|
|
|
|
|
|
|
|
if(mountflags & MS_REMOUNT)
|
|
|
|
freebsd_flags |= MNT_UPDATE;
|
|
|
|
|
|
|
|
if(mountflags & MS_NOATIME)
|
|
|
|
freebsd_flags |= MNT_NOATIME;
|
|
|
|
|
|
|
|
if(mountflags & MS_NOSUID)
|
|
|
|
freebsd_flags |= MNT_NOSUID;
|
|
|
|
|
|
|
|
if(mountflags & MS_RDONLY)
|
|
|
|
freebsd_flags |= MNT_RDONLY;
|
|
|
|
|
|
|
|
// TODO: handle MS_REC?
|
|
|
|
|
|
|
|
build_iovec(&iov, &iovlen, "fstype", reinterpret_cast<const void*>(filesystemtype), (size_t)-1);
|
|
|
|
build_iovec(&iov, &iovlen, "fspath", reinterpret_cast<const void*>(target), (size_t)-1);
|
|
|
|
build_iovec(&iov, &iovlen, "from", reinterpret_cast<const void*>(source), (size_t)-1);
|
|
|
|
|
|
|
|
return nmount(iov, iovlen, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
#define MNT_DETACH 1
|
|
|
|
|
|
|
|
int umount2(const char *target, int flags)
|
|
|
|
{
|
|
|
|
if(flags == MNT_DETACH)
|
|
|
|
flags = 0;
|
|
|
|
|
|
|
|
return unmount(target, flags);
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define MOUNT mount
|
|
|
|
#endif
|
|
|
|
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
void usage(const char* program)
|
2016-04-02 13:17:22 -05:00
|
|
|
{
|
2020-11-25 04:40:58 -06:00
|
|
|
fprintf(stderr, "Usage: %s <-b|-r> <source path> <target path>\n", program);
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
fprintf(stderr, " %s -u <target>.\n", program);
|
|
|
|
fprintf(stderr, " -b bind and mount the source to target.\n");
|
|
|
|
fprintf(stderr, " -r bind and mount the source to target as readonly.\n");
|
|
|
|
fprintf(stderr, " -u to unmount the target.\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
int main(int argc, char** argv)
|
|
|
|
{
|
2020-11-25 04:40:58 -06:00
|
|
|
if (!hasCorrectUID(/* appName = */"loolmount"))
|
2021-01-09 13:18:51 -06:00
|
|
|
{
|
|
|
|
fprintf(stderr, "Aborting.\n");
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_SOFTWARE;
|
2021-01-09 13:18:51 -06:00
|
|
|
}
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
|
2020-11-25 04:40:58 -06:00
|
|
|
const char* program = argv[0];
|
2016-04-02 13:17:22 -05:00
|
|
|
if (argc < 3)
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
{
|
|
|
|
usage(program);
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_USAGE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
const char* option = argv[1];
|
|
|
|
if (argc == 3 && strcmp(option, "-u") == 0) // Unmount
|
|
|
|
{
|
|
|
|
const char* target = argv[2];
|
|
|
|
|
|
|
|
struct stat sb;
|
|
|
|
const bool target_exists = (stat(target, &sb) == 0 && S_ISDIR(sb.st_mode));
|
2016-04-02 13:17:22 -05:00
|
|
|
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
// Do nothing if target doesn't exist.
|
|
|
|
if (target_exists)
|
|
|
|
{
|
|
|
|
// Unmount the target, first by detaching. This should succeed.
|
|
|
|
int retval = umount2(target, MNT_DETACH);
|
|
|
|
if (retval != 0)
|
|
|
|
{
|
|
|
|
if (errno != EINVAL)
|
|
|
|
fprintf(stderr, "%s: unmount failed to detach [%s]: %s.\n", program, target,
|
|
|
|
strerror(errno));
|
|
|
|
}
|
|
|
|
|
|
|
|
// Now try to force the unmounting, which isn't supported on all filesystems.
|
|
|
|
retval = umount2(target, MNT_FORCE);
|
|
|
|
if (retval && errno != EINVAL)
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: forced unmount of [%s] failed: %s.\n", program, target,
|
|
|
|
strerror(errno));
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_SOFTWARE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else if (argc == 4) // Mount
|
|
|
|
{
|
|
|
|
const char* source = argv[2];
|
|
|
|
struct stat sb;
|
|
|
|
if (stat(source, &sb) != 0 || !S_ISDIR(sb.st_mode))
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: cannot mount from invalid source directory [%s].\n", program,
|
|
|
|
source);
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_USAGE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
const char* target = argv[3];
|
|
|
|
const bool target_exists = (stat(target, &sb) == 0 && S_ISDIR(sb.st_mode));
|
|
|
|
if (!target_exists)
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: cannot mount on invalid target directory [%s].\n", program,
|
|
|
|
target);
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_USAGE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// Mount the source path as the target path.
|
|
|
|
// First bind to mount an existing directory node into the chroot.
|
|
|
|
// MS_BIND ignores other flags.
|
|
|
|
if (strcmp(option, "-b") == 0) // Shared or Bind Mount.
|
|
|
|
{
|
|
|
|
const int retval
|
2020-11-08 09:46:38 -06:00
|
|
|
= MOUNT(source, target, nullptr, (MS_MGC_VAL | MS_BIND | MS_REC), nullptr);
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
if (retval)
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: mount failed to bind [%s] to [%s]: %s.\n", program, source,
|
|
|
|
target, strerror(errno));
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_SOFTWARE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
else if (strcmp(option, "-r") == 0) // Readonly Mount.
|
|
|
|
{
|
|
|
|
// Now we need to set read-only and other flags with a remount.
|
2020-11-08 09:46:38 -06:00
|
|
|
int retval = MOUNT(source, target, nullptr,
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
(MS_BIND | MS_REC | MS_REMOUNT | MS_NOATIME | MS_NODEV | MS_NOSUID
|
|
|
|
| MS_RDONLY | MS_SILENT),
|
|
|
|
nullptr);
|
|
|
|
if (retval)
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: mount failed remount [%s] readonly: %s.\n", program, target,
|
|
|
|
strerror(errno));
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_SOFTWARE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
|
2020-11-08 09:46:38 -06:00
|
|
|
retval = MOUNT(source, target, nullptr, (MS_UNBINDABLE | MS_REC), nullptr);
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
if (retval)
|
|
|
|
{
|
|
|
|
fprintf(stderr, "%s: mount failed make [%s] private: %s.\n", program, target,
|
|
|
|
strerror(errno));
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_SOFTWARE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
else
|
|
|
|
{
|
|
|
|
usage(program);
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_USAGE;
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
}
|
2016-04-02 13:17:22 -05:00
|
|
|
|
wsd: faster jail setup via bind-mount
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
2020-04-09 08:02:58 -05:00
|
|
|
fflush(stderr);
|
2020-11-25 04:40:58 -06:00
|
|
|
return EX_OK;
|
2016-04-02 13:17:22 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
|