Our header parses was overly simplistic and
didn't support a number of corner cases that
rfc2616 specifies (folding, for example). The
new approach is to simply normalize the headers by
removing invalid line-breaks and then let the
MessageHeader parser take care of parsing the
headers individually, which we then set on the request.
The new utility setHttpHeaders should be used
whenever we need to set a header in an request
to make sure it are sanitized and valid.
Change-Id: Ifa16fa9364f42183316749276c5d0a4c556cb740
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/96371
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ash@collabora.com>
loolmount now works and supports mounting and
unmounting, plus numerous improvements,
refactoring, logging, etc.. When enabled,
binding improves the jail setup time by anywhere
from 2x to orders of magnitude (in docker, f.e.).
A new config entry mount_jail_tree controls
whether mounting is used or the old method of
linking/copying of jail contents. It is set to
true by default and falls back to linking/copying.
A test mount is done when the setting is enabled,
and if mounting fails, it's disabled to avoid noise.
Temporarily disabled for unit-tests until we can
cleanup lingering mounts after Jenkins aborts our
build job. In a future patch we will have mount/jail
cleanup as part of make.
The network/system files in /etc that need frequent
refreshing are now updated in systemplate to make
their most recent version available in the jails.
These files can change during the course of loolwsd
lifetime, and are unlikely to be updated in
systemplate after installation at all. We link to
them in the systemplate/etc directory, and if that
fails, we copy them before forking each kit
instance to have the latest.
This reworks the approach used to bind-mount the
jails and the templates such that the total is
now down to only three mounts: systemplate, lo, tmp.
As now systemplate and lotemplate are shared, they
must be mounted as readonly, this means that user/
must now be moved into tmp/user/ which is writable.
The mount-points must be recursive, because we mount
lo/ within the mount-point of systemplate (which is
the root of the jail). But because we (re)bind
recursively, and because both systemplate and
lotemplate are mounted for each jails, we need to
make them unbindable, so they wouldn't multiply the
mount-points for each jails (an explosive growth!)
Contrarywise, we don't want the mount-points to
be shared, because we don't expect to add/remove
mounts after a jail is created.
The random temp directory is now created and set
correctly, plus many logging and other improvements.
Change-Id: Iae3fda5e876cf47d2cae6669a87b5b826a8748df
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92829
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
The access_header can contain a lot of nonsense, like whitespace around
or additional \n's or \r's. We used to sanitize that, but then
regressed in e95413d151 where the
"tokenize by any of \n\r" was by mistake replaced with "tokenize by
string '\n\r'".
Unfortunately the unit test didn't uncover that, and the further
refactorings of the related code have hidden that even more.
Change-Id: Ie2bf950d0426292770b599e40ee2401101162ff2
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/96638
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Andras Timar <andras.timar@collabora.com>
More readable and typically more efficient.
Change-Id: I9bd5bfc91f4ac255bb8ae0987708fb8b56b398f8
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/95285
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Jenkins
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Also add the missing newlines before the opening braces, the surrounding
code has that style.
Change-Id: I23bd26ba6d2446858ae3213212e2813a38fd1d46
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/92146
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
This is meant to reduce lots of small allocations and instead have
pointers into the single string for the various tokens instead.
This has a few requirements, though:
1) It's no longer OK to modify the tokens, changing their length would
invalidate the start/length of other tokens. Rework
DocumentBroker::load() to avoid such mutation.
2) The iterators no longer expose zero-terminated strings, so
Poco::cat() doesn't work anymore: add an own cat() instead and use that
in e.g. ChildSession. The own cat() has the benefit that it won't read
past the end of the array if the begin index is out of bounds to add
more safety.
(This nicely works towards killing Poco usage in general.)
3) If zero-terminated strings for all individual tokens is needed, a
copy has to be made, as done in spawnProcess().
(For all of these requirements, the build fails if there are problems.)
Change-Id: Iea40e4400e630b2d669f5c72aea85cb40edf9a2c
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89711
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
The bulk of this commit just changes std::vector<std::string> to
StringVector when we deal with tokens from a websocket message.
The less boring part of it is the new StringVector class, which is a
wrapper around std::vector<std::string>, and provides the same API,
except that operator[] returns a string, not a string&, and this allows
returning an empty string in case that prevents reading past the end of
the underlying array.
This means in case client code forgets to check size() before invoking
operator[], we don't crash. (See the ~3 previous commits which fixed
such crashes.)
Later the ctor could be changed to take a single underlying string to
avoid lots of tiny allocations, that's not yet done in this commit.
Change-Id: I8a6082143a8ac0b65824f574b32104d7889c184f
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89687
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
- target ClientSession::_handleInput(), since crashing there would bring
down the whole loolwsd (not just a kit process), and it deals with
input from untrusted users (browsers)
- add a --enable-fuzzers configure switch to build with
-fsanitize=fuzzer (compared to normal sanitizers build, this is the only
special flag needed)
- configuring other sanitizers is not done automatically, either use
--with-sanitizer=... or the environment variables from LODE's sanitizer
config
- run the actual fuzzer like this:
./clientsession_fuzzer -max_len=16384 fuzzer/data/
- note that at least openSUSE Leap 15.1 sadly ships with a clang with
libfuzzer static libs removed from the package, so you need a
self-built clang to run the fuzzer (either manual build or one from
LODE)
- <https://chromium.googlesource.com/chromium/src/testing/libfuzzer/+/refs/heads/master/efficient_fuzzing.md#execution-speed>
suggests that "You should aim for at least 1,000 exec/s from your fuzz
target locally" (i.e. one run should not take more than 1 ms), so try
this minimal approach first. The alternative would be to start from the
existing loolwsd_fuzzer binary, then step by step cut it down to not
fork(), not do any network traffic, etc -- till it's fast enough that
the fuzzer can find interesting input
- the various configurations start to be really complex (the matrix is
just very large), so try to use Util::isFuzzing() for fuzzer-specific
changes (this is what core.git does as well), and only resort to ifdefs
for the Util::isFuzzing() itself
Change-Id: I72dc1193b34c93eacb5d8e39cef42387d42bd72f
Reviewed-on: https://gerrit.libreoffice.org/c/online/+/89226
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Using double caused all sorts of rounding issues,
especially with random unit-test failures.
Luckily, we don't need doubles and can do everything
with integers.
Also added a new function to print time_point as
iso8601 string, for logging and convenience.
Change-Id: I1c2040c02d1143282dbde0dadef32613b77c330d
Reviewed-on: https://gerrit.libreoffice.org/81578
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
Tested-by: Ashod Nakashian <ashnakash@gmail.com>
Util added getHttpTime
WhiteBoxTests added test for getHttpTime
Change-Id: Ifb6a3fb2dc9b059b925e7b881362b72759a8b56b
Reviewed-on: https://gerrit.libreoffice.org/79754
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Michael Meeks <michael.meeks@collabora.com>
The thread name helps one track threads in logs.
When renaming threads it's important to log the process
and previous thread name (if any), so grepping is more
fruitful and tracking is easier.
Change-Id: I47a948d77629b387cc1e9fd58fdd88e1ae1168df
Reviewed-on: https://gerrit.libreoffice.org/79327
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
Tested-by: Ashod Nakashian <ashnakash@gmail.com>
It is std::chrono::system_clock that has to_time_t.
std::chrono::steady_clock does not have to_time_t.
std::chrono::high_resolution_clock is either the same as system_clock
(in libstdc++, on Linux) or steady_clock (libc++, on iOS).
(This change does not fix the actual bugs in the code, just makes it
compile for iOS. The new ISO8601 fractional time code is not unit
tested at the moment. The testTime() function is not part of the test
suite in WhiteBoxTests.cpp. If it is made part of it, it reveals
problems in the code (and/or in the unit test code).)
Change-Id: Id33342bc8b26465632f3d21d6ec2f3c975ae3681
Reviewed-on: https://gerrit.libreoffice.org/78550
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Michael Meeks <michael.meeks@collabora.com>
Added functions to get file timestamp and to convert
chrono timestamp in ISO8601 fraction format and some
test cases.
Change-Id: I58961a31f7262b367cff9f33cffdec7571a2f8f7
Better hashing algorithm based on FNV-1a.
Adds support for salting the hash, and
for providing salt via configuration.
More unit-tests added, and better formatting.
Change-Id: I2be42675d0cdbaa73c3d7faed99e07631a9c20fc
Reviewed-on: https://gerrit.libreoffice.org/70034
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
Tested-by: Ashod Nakashian <ashnakash@gmail.com>
Reviewed-on: https://gerrit.libreoffice.org/71091
Added a function to Util to get current time in HTTP
format using std::chrono.
Change-Id: I9e7a732f585c1758c9348c450a01713a66f1e7b7
Reviewed-on: https://gerrit.libreoffice.org/72585
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Michael Meeks <michael.meeks@collabora.com>
The former is the standard C++ approach
and is reportedly faster than __thread
(at least with gcc).
Change-Id: Ibdefd32172774a280637f73dd062282b7bf62025
Reviewed-on: https://gerrit.libreoffice.org/71019
Reviewed-by: Ashod Nakashian <ashnakash@gmail.com>
Tested-by: Ashod Nakashian <ashnakash@gmail.com>
Also fix unexpected concatenation error in Poco::URI::encode generating
eg. authorid=localhost0 xauthorid=localhost0localhost0 in the output.
Change-Id: I560e47e31884eeb1c662f468436ed7541cfb082d
Also support anonymization of downloadas documents
and renaming of documents.
Reviewed-on: https://gerrit.libreoffice.org/57541
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
(cherry picked from commit 78248a542c9ca31bf9ad4cad9b55d78690384395)
Change-Id: I81a80e6290217659987d73f625e5f0fb81cb7ef2
This is important for when we abort with some explanation.
Often said explanation doesn't show up anywhere to be useful.
Also, issue fatal logs for abnormal exist and use SFL to log errno.
Reviewed-on: https://gerrit.libreoffice.org/57540
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
(cherry picked from commit ad7964393eadb68873b820e0a620fb40f1e1b06a)
Change-Id: Ic67064ef40ef6e93d26e5847ecd32bdd49c3cc8b
The async-signal-safe functions to get thread-id
and thread-name, which cache the results, are
faster, cleaner, and signal-safe. No reason why
we shouldn't always use them.
Especially since it appears the logic was
inverted in Log::prefix, such that the signal
un-safe calls were made during signal-handling,
and the safe ones were called otherwise!
Instead of passing the signal-safe flag to
Log::prefix, we pass the buffer size, for
improved security.
Furthermore, reduce header dependencies
and reduce clutter.
Change-Id: I697689b2f0a290b6d8cce4babc3ac1e576141da6
The idea is that it would work sufficiently identically, so that even
people without a Mac and without an iOS device could participate in
development of the non-iOS-specific bits, like the JavaScript, or the
online MOBILEAPP-specific plumbing. Which would be great.
No, this doesn't do anything sane yet. It does compile the same online
C++ files as the iOS app, though. (Some minor tweaks were needed in a
couple of them to silence gcc warnings.)
There is a plain Makefile, but I should change to using autofoo, too.
Eventually, this will need to be built in a separate tree from a
normal online, just like when using the --enable-iosapp configure
switch. (But for now, doesn't matter.)
Change-Id: I13e4d921acb99d802d2f9da4b0df4a237ca60ad6
