No need to complain when bind() didn't fail.
And assert when/if we are going to overflow.
Change-Id: I66f5ff1963c0afc6652afb5a7d017e197d945736
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
More consistent logging of the socket FD.
Change-Id: Iee24ad4eb067969abfc06f78a768563351d264c7
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Since both implementations are identical, there
really is no benefit to having two version.
Change-Id: I4a5288243291c0d5706df8e8870b918fab425317
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
And improved socket logging in general while
making them more consistent.
Change-Id: I1ed7f2561476ca5370af91079d5d616804396f8e
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
This prevents the kit from becoming a zombie
when it has an early failure to connect to WSD.
Change-Id: I4e8203b2cc3d80822308236e5b47be0c0c96e9ae
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
In 'debug' log-level we expect a detailed, but
still readable output. Having one area with
disproportionately large number of logs reduces
the overall utility of the log output.
This patch reduces a number of redundant log
entries, including errors that are already
logged. It also reduces the level of some
others from 'information' to 'debug' and
from 'debug' to 'trace'.
The goal is to make 'debug' level as useful as
possible to read the progress and be able to
understand what was going on, such that one is
able to decide which area to dig deeper into.
Then, trace level could be used to get more
insight into that area, if necessary. For
example, when investigating a test failure,
one first enables 'debug' logs and reads through.
Once a section between two debug entries is
identified as being of interest, enabling 'trace'
level logs becomes more productive as it's
now possible to easily reach the first DBG
entry and read through until the second one.
It's unfortunate that we don't have per-area
control for enabling/disabling logs, so it
is common to see more and more 'debug' log
entries added all around, making logs
less and less readable.
It is also a limitation of the levels we have
that we really only have 3 usable levels:
one, two, many. That is, 'information' for
the most important events, 'debug' for
technical details needed to investigate issues,
and 'trace' for everything else. ('warning'
and 'error' aren't really 'levels'; they have
semantics that makes them special-cases.)
So we have to avoid degrading one into the
other, or have differences without distinction.
If any of these entries are needed to be
displayed more frequently, changing them
back to 'debug' or even 'information' should
be done. Though for me they seem special
cases that don't benefit most log readings.
Change-Id: Id2c6a9dc027483b81a066b0b4b50a298c5eff449
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
This adds dumpState to DocumentState, SaveManager,
and StorageManager classes, and dumps all the
missing members.
Also, normalize the format and make it symmetric
and consistent.
Change-Id: Ie0cc8e07d13de60c33d64cd621abf4e815a4ef94
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Now the remaining tests that didn't have a name
get one and the logs are unified between old-
and new-style tests. Mostly.
This makes sure that all logs and assertions
properly log the test name and make test
failures easier to debug and fix.
Change-Id: Id159ffacc81642a6ec594c5143498408adab67cf
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
This reduces some logs from debug to trace,
especially in Socket where the amount of
activity is high, but the logs in question
don't add value in debug level.
Also supressed an error when superfluous.
This makes debug-level logs much more readable
and relevant to the main events.
Change-Id: Ie2698b56f320d15a09060cf2877477d9da0e1582
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
We don't want to always start with the most recently added socket.
Signed-off-by: Tor Lillqvist <tml@collabora.com>
Change-Id: Ic4b4bf6c19c5d119e6e6f9b398789a4c77b47a10
Add profile zone around kitPoll function and SocketPoll constructor to
improve trace event generation
Signed-off-by: Gopi Krishna Menon <krishnagopi487.github@outlook.com>
Change-Id: Ia46e9add59a57935997649fe39861a8d851e1ff0
Also clear its input buffer explicitly.
Change-Id: I8badbb96d98eaf10433a65fcfd13b0d6d5893594
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Ignore input in a somewhat gentler way.
Signed-off-by: Michael Meeks <michael.meeks@collabora.com>
Change-Id: I758302dc3bb1aa87f9fbfa726f73f4b9339e08c2
We send lots of large tile data this way, this should help
accelerate tile data transfer marginally.
Change-Id: I1deab7845c09dc65b1f44e9f9fc762f70ce94cc3
Signed-off-by: Michael Meeks <michael.meeks@collabora.com>
When writing to the socket, it's always more efficient
to fill the buffer up to the hardware limit for each
write. This is doubly important for efficiency with
SSL, due to the overhead of encrypting multiple
small buffers instead of one large one.
Currently we don't write more than one message
at a time, primarily due to limitations in
the Poco sockets in the unit-tests, which
have a hard time consuming multiple WS frames
with a single poll (subsequent calls to poll
doesn't enter signalled state until new data
arrives, possibly because the data is read and
buffered internally, making the whole scheme
of using poll unreliable and meaningless).
Change-Id: Ic2e2cf1babfb5ab4116efd93f392977ba234d92b
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Now that the WebSocket functionality is available in
WebSocketHandler, we can cleanup Socket.
Change-Id: Ia3703ab5a2f00fb835eb80493bc400a91dabefad
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Improved handling of http::Request and http::Response
in Socket directly with better error handling and
automatic socket shutdown on error.
We shouldn't need to manually serialize into the
socket's buffer when sending a Request or Response.
Change-Id: I6dfcd2fe4f6b88cd2fa8c749045ce25a8c52fe9a
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
The Socket now accepts http::Response and
serializes it before sending it.
Change-Id: Id36e2d91b21d168da72ccdbd7e509ec08021b78e
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
User-Agent is designed for client-side use only,
in http requests. For servers, the Server header
is designed to announce the server name and version.
This tries to normalize the use and documents
the proper intent and usage.
Change-Id: I42d68d65611cab64c45adf03fe74f9466798b093
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
There are scenarios where startThread is
called either when the thread is already
running or when it has long since finished.
Logs are added to catch them, and better
document the expected behavior in those
cases (they shouldn't happen).
Change-Id: I219a59b92c943445ec4520667a8ed6d9bd1c328d
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Especially error reporting is now better.
Change-Id: I032f6e8403660c2ac24be2d80b53b63831ec1066
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
SSL signals whether it needs more data to read or write
so that we perform the appropriate polling and call
the respective API. Since during error simulation
we skip calling the SSL API altogether, we shouldn't
change the last desired operation it communicated to us.
This becomes clear when we consider that we always read,
unconditionally, in StreamSocket::handlePoll (but write
only when poll signals POLLOUT event). This means that
if we decide to simulate a socket error during such
uncoditional read, and SSL wants to write, we would
reset its last wantsTo flag from write to read!
Logically, since we aren't even invoking any SSL API
during a simulated error, we shouldn't change the
SSL state one way or the other.
Change-Id: Ie4ddbc959f8424ea4ac3bc52f30edbc7399b2c7a
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
The API is the same for both SSL and non-SSL sockets
(they are virtual functions), and the API relies on
errno to detect errors and decide to retry, log, or
break. As such, we must set the same EAGAIN when
simulating socket errors for both SSL and non-SSL
cases, so that the behavior would also be the same.
Change-Id: Ib1695cc94d93f5ecc53d7b22872f459ac8b11bbd
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Move the connect function into the NetUtil
translation unit to aid using it for the
upcoming async socket logic.
The NetUtil should also come in handy for
the miscellaneous network helpers we have.
Change-Id: I2ee0c6e3e1769fd87572d7407d3b4979b59ffe6a
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
When we simulate socket error it's hard to understand
what is going on, since there is no real errno to
explain the -1 return value. This is at least true
in the SSL case where we don't set errno (perhaps
we should?). At any rate, it's good form to log
that we are messing up with the return value and
that the real socket API hasn't been even invoked.
Change-Id: Ib76f0259dbdcfe0cfae97343c11ca45461079fa1
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
Add support for configuring the SSL certificates
when running the test binary as well as setting
up the SSL context.
Also adds the SSL socket headers with proper
compile-time guards for when SSL is disabled.
Change-Id: I99992639a66a64871f8ff8a2b2105279ead63ca1
Signed-off-by: Ashod Nakashian <ashod.nakashian@collabora.co.uk>
