libreoffice-online/loolwsd
Miklos Vajna 4a7265ae76 Makefile: fix autoreconf warning
Makefile.am:18: warning: deprecated feature: target 'SETCAP' overrides 'SETCAP$(EXEEXT)'
Makefile.am:18: change your target to read 'SETCAP$(EXEEXT)'
/usr/share/automake-1.13/am/program.am: target 'SETCAP$(EXEEXT)' was defined here
Makefile.am:1:   while processing program 'SETCAP'
2015-04-24 17:27:21 +02:00
..
.gitignore Work in progress: "pre-forking", chroot, etc. Non-working state 2015-04-22 21:42:17 +03:00
AUTHORS Autofooize 2015-03-09 11:19:00 +02:00
ChangeLog Autofooize 2015-03-09 11:19:00 +02:00
configure.ac Add the debug suffix to Poco libs only when self-built. 2015-04-23 17:29:56 +02:00
Connect.cpp Don't try to run the 'display' program if there is no $DISPLAY 2015-04-24 18:18:56 +03:00
COPYING Autofooize 2015-03-09 11:19:00 +02:00
INSTALL Autofooize 2015-03-09 11:19:00 +02:00
LoadTest.cpp s/localhost/127.0.0.1/ 2015-04-23 18:52:19 +03:00
LoadTest.hpp Start on load testing 2015-03-26 17:04:08 +02:00
LOKitClient.cpp Don't try to run the 'display' program if there is no $DISPLAY 2015-04-24 18:18:56 +03:00
LOKitHelper.hpp Bump Emacs fill-column to 100 2015-04-22 21:43:11 +03:00
LOOLProtocol.cpp Avoid accessing string out of bounds 2015-04-23 17:16:44 +03:00
LOOLProtocol.hpp Now the chroot etc re-work is getting closer to working 2015-04-22 21:44:17 +03:00
LOOLSession.cpp Use shared_ptr and weak_ptr in attempt to make the pointer dance more robust 2015-04-22 21:50:17 +03:00
LOOLSession.hpp Use shared_ptr and weak_ptr in attempt to make the pointer dance more robust 2015-04-22 21:50:17 +03:00
LOOLWSD.cpp Log the exit status of a child process, or the signal that killed it 2015-04-24 13:14:57 +03:00
LOOLWSD.hpp Use separate classes derived from LOOLSession for parent and child processes 2015-04-22 21:48:04 +03:00
Makefile.am Makefile: fix autoreconf warning 2015-04-24 17:27:21 +02:00
NEWS Autofooize 2015-03-09 11:19:00 +02:00
protocol.txt A bit more info 2015-03-24 19:04:16 +02:00
README Mention that the tile cache directory needs to be created 2015-04-24 17:46:01 +03:00
setup-sys-chroot Simplify 2015-04-23 15:24:20 +03:00
TileCache.cpp Bump Emacs fill-column to 100 2015-04-22 21:43:11 +03:00
TileCache.hpp Cache also document status 2015-03-13 14:17:51 +02:00
TODO Update README with debugging hints. 2015-04-23 17:29:56 +02:00
Util.cpp Add Util::signalName() 2015-04-24 12:49:19 +03:00
Util.hpp Cosmetics 2015-04-24 12:49:47 +03:00

LibreOffice On-Line WebSocket server
====================================

Dependencies
------------

LibreOffice On-Line WebSocket server has the following dependencies:

* libpng
* Poco library: http://pocoproject.org/index.html.
* libcap-progs

Poco can be built with ./configure --prefix=/opt/poco && make install, but
distro packages exist too.

On openSUSE, you can use:

    zypper ar http://download.opensuse.org/repositories/devel:/libraries:/c_c++/openSUSE_13.2/devel:libraries:c_c++.repo
    zypper in poco-devel libcap-progs

Building
--------

loolwsd uses autoconf/automake, so build using the usual:

    autoreconf
    automake --add-missing
    ./configure --enable-silent-rules --with-lokit-path=<MASTER>/include
    make

where <MASTER> is the location of the LibreOffice source tree.

Note that the loolwsd program needs the CAP_SYS_CHROOT capability,
thus you will be asked the root password when running make as it
invokes sudo to run /sbin/setcap.

If you have self-built Poco, add the following to ./configure:

    --with-poco-includes=<POCOINST>/include --with-poco-libs=<POCOINST>/lib

where <POCOINST> means the Poco installation location.

If you have the Poco debugging libraries (eg. you have a self-built
Poco), you can add --enable-debug to the configure options for
additional debugging.

For Windows, a proper VS2013 project is needed.

There is still unconditional debugging output etc. This is a work in
progress.

Running
-------

First create the directory used for caching tiles. It is set as
"${localstatedir}/cache/${PACKAGE}" in the configure.ac, so if you did
not pass any switch to the configure script that affects
"localstatedir, it will be /usr/local/var/cache/loolwsd . If you did
pass such a switch, like --prefix, check config.h for the exact value.

Now you need to set up a minimal chroot system, and directory for the jails:

    ./setup-sys-chroot <SYSTEMPLATE> <MASTER>/instdir
    mkdir <ROOTFORJAILS>

To run loolwsd the way it is supposed to eventually be run "for real", you can
now do:

    ./loolwsd --systemplate=<SYSTEMPLATE> --lotemplate=<MASTER>/instdir --childroot=<ROOTFORJAILS>

and connect loleaflet to that (see loleaflet/README for more info).

Again, <MASTER> is location of the LibreOffice source tree with a built
LibreOffice.  This is work in progress, and consequently needs the latest
LibreOffice master.

The <SYSTEMPLATE> is a directory tree set up using the
setup-sys-chroot script here. It is intended to contain the runtime
environment needed by the LibreOffice dynamic libraries used through
LibreOfficeKit. Improvements to that script are very likely needed on
various distros.

The <ROOTFORJAILS> directory above is a presumably initially empty
directory under which loolwsd will create chroot jails for editing
each specific document.

As loolwsd uses hardlinks to "copy" the contents of both <SYSTEMPLATE>
and the <MASTER>/instdir directories into each chroot jail,
<SYSTEMPLATE> and <ROOTFORJAILS> need to be on the same file system as
<MASTER>/instdir.

If you plan to hack on loolwsd, you probably want to familiarize
yourself with loolwsd's --test and --numprespawns switches, and the
'connect' test program.

For interactive testing, you can use the loolwsd --test switch, or you
can use the 'connect' program. Both accept "commands" from the
protocol on standard input. You can either used them tuly
interactively, or edit input lines into a file, or use shell
scripting, etc. For instance:

    (echo load /some/where/foo.odt; echo tile width=500 height=500 tileposx=0 tileposy=0 tilewidth=10000 tileheight=10000; sleep 10) |
    ./loolwsd --test --systemplate=/home/tml/lo/master/lool-sys-template --lotemplate=/home/tml/lo/master/instdir --childroot=/home/tml/lo/master/lool-child-root

Debugging
---------

When debugging, you want to add --numprespawns=1 to the loolwsd parameters to
limit the amount of concurrently running processes.

When the crash happens too early, you also want to

    export SLEEPFORDEBUGGER=<number of seconds>

so that you have time to attach to the process.

Then run loolwsd, and attach your debugger to the process you are interested
in.

Protocol description
--------------------

See protocol.txt for a description of the protocol to be used over the
websocket.

Coding style
------------

There is not really any serious rationale why the code ended up being
written in the style it is... but unless you plan to change some style
detail completely and consistenly all over, please keep to the style
of the existing code when editing.

The style is roughly as follows, in rough order of importance:

- As in LO, no hard TABs in source files. Only spaces. Indentation
  step is four columns.

- As in LO, the braces { and } of the block of if, switch, and while
  statements go on separate lines.

- Following Poco conventions, member variables are prefixed with an
  underscore. But I am not opposed to changing this to 'm_' for
  instance.

- Do use C++11. I admit in some places (out of laziness or ignorance)
  I use Poco API even if there probably is an equivalent std::
  API. (Like for threads.) Feel free to change those, if the std:: API
  is not much more verbose or ugly, and you are sure it is equivalent.

- Always prefer the C++ wrapped version of a C library
  API. I.e. include <cstring> instead of <string.h>, use std::memcpy()
  instead of memcpy(), etc.

- Use std:: prefix for all std API, i.e. don't ever do "using
  std;". But it's OK to use "using Poco::Foo;" all over. Maybe that is
  not a good idea?

- Be as portable as possible, i.e. don't intentionally write Unix-only
  code if there is a choice. Obviously some parts of the code
  currently use Unix-only things like chroot() and link() though.

- Member functions use camelCaseWithInitialLowerCase. I don't like
  CamelCaseWithInitialUpperCase.

- No kind of Hungarian prefixes.