office-gobmx/xmloff/inc/MultiPropertySetHelper.hxx

/*************************************************************************
 *
 *  $RCSfile: MultiPropertySetHelper.hxx,v $
 *
 *  $Revision: 1.5 $
 *
 *  last change: $Author: mib $ $Date: 2001-09-05 06:25:51 $
 *
 *  The Contents of this file are made available subject to the terms of
 *  either of the following licenses
 *
 *         - GNU Lesser General Public License Version 2.1
 *         - Sun Industry Standards Source License Version 1.1
 *
 *  Sun Microsystems Inc., October, 2000
 *
 *  GNU Lesser General Public License Version 2.1
 *  =============================================
 *  Copyright 2000 by Sun Microsystems, Inc.
 *  901 San Antonio Road, Palo Alto, CA 94303, USA
 *
 *  This library is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU Lesser General Public
 *  License version 2.1, as published by the Free Software Foundation.
 *
 *  This library is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *  Lesser General Public License for more details.
 *
 *  You should have received a copy of the GNU Lesser General Public
 *  License along with this library; if not, write to the Free Software
 *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 *  MA  02111-1307  USA
 *
 *
 *  Sun Industry Standards Source License Version 1.1
 *  =================================================
 *  The contents of this file are subject to the Sun Industry Standards
 *  Source License Version 1.1 (the "License"); You may not use this file
 *  except in compliance with the License. You may obtain a copy of the
 *  License at http://www.openoffice.org/license.html.
 *
 *  Software provided under this License is provided on an "AS IS" basis,
 *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
 *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
 *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
 *  See the License for the specific provisions governing your rights and
 *  obligations concerning the Software.
 *
 *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
 *
 *  Copyright: 2000 by Sun Microsystems, Inc.
 *
 *  All Rights Reserved.
 *
 *  Contributor(s): _______________________________________
 *
 *
 ************************************************************************/
#ifndef _XMLOFF_CONDITIONALMULTIPROPERTYSETHELPER_HXX
#define _XMLOFF_CONDITIONALMULTIPROPERTYSETHELPER_HXX

#ifndef _RTL_USTRING_HXX_
#include <rtl/ustring.hxx>
#endif

#ifndef _COM_SUN_STAR_UNO_SEQUENCE_HXX_
#include <com/sun/star/uno/Sequence.hxx>
#endif

#ifndef _TOOLS_DEBUG_HXX
#include <tools/debug.hxx>
#endif


namespace com { namespace sun { namespace star {
    namespace beans { class XMultiPropertySet; }
    namespace beans { class XPropertySet; }
    namespace beans { class XPropertySetInfo; }
} } }


/**
 * The MultiPropertySetHelper performs the follwing functions:
 *
 * Given a list of property names (as sal_Char** or OUString*), it can
 * query an XMultiPropertySet (or XPropertySet) which of these properties
 * it supports (method hasProperties(...)). The properties *MUST* be
 * sorted alphabetically.
 *
 * Then, the X(Multi)PropertySet can be queried for values, and only
 * the supported properties are queried. (method getValues(...)) The
 * values are stored in the helper itself.
 *
 * Finally, each property can be queried for existence
 * (method hasProperty(...)) or its value (method (getValue(...))).
 *
 * After some initial preparation (hasProperties, getValues) the
 * MultiPropertySetHelper can be used similarly to an
 * XPropertySet in that you can query the values in the places where you
 * need them. However, if an XMultiPropertySet is supplied, the queries
 * are more efficient, often significantly so.
 */
class MultiPropertySetHelper
{
    /// names of all properties
    ::rtl::OUString* pPropertyNames;

    /// length of pPropertyNames array
    sal_Int16 nLength;

    /// the sequence of property names that the current (multi)
    /// property set implementation supports
    ::com::sun::star::uno::Sequence< ::rtl::OUString > aPropertySequence;

    /// an array of indices that maps from pPropertyNames indices to
    /// aPropertySequence indices
    sal_Int16* pSequenceIndex;

    /// the last set of values retrieved by getValues
    ::com::sun::star::uno::Sequence< ::com::sun::star::uno::Any > aValues;

    /// result of aValues.getConstArray()
    const ::com::sun::star::uno::Any* pValues;

    /// an empty Any
    ::com::sun::star::uno::Any aEmptyAny;

public:

    MultiPropertySetHelper( const sal_Char** pNames );

    MultiPropertySetHelper( const ::rtl::OUString* pNames );

    ~MultiPropertySetHelper();


    /**
     * Call hasPropertiesByName for the provided XPropertySetInfo and build
     * list of allowed properties.
     */
    void hasProperties( const ::com::sun::star::uno::Reference<
                            ::com::sun::star::beans::XPropertySetInfo> & );


    /**
     * Return whether hasProperties was called
     * (i.e. if we are ready to call getValues)
     */
    sal_Bool checkedProperties();

    /**
     * Get values from the XMultiPropertySet.
     *
     * May only be called after hasProperties() was called for the
     * appropriate XPropertySetInfo.
     */
    void getValues( const ::com::sun::star::uno::Reference<
                            ::com::sun::star::beans::XMultiPropertySet> & );

    /**
     * Get values from the XPropertySet. This can be much slower than
     * getValues( const Reference<XMultiPropertySet& ) and hence
     * should be avoided.
     *
     * May only be called after hasProperties() was called for the
     * appropriate XPropertySetInfo.
     */
    void getValues( const ::com::sun::star::uno::Reference<
                            ::com::sun::star::beans::XPropertySet> & );



    /**
     * Get a value from the values array.
     *
     * May only be called after getValues() was called.
     */
    inline const ::com::sun::star::uno::Any& getValue( sal_Int16 nIndex );

    /**
     * Find out if this property is supported.
     *
     * May only be called after hasProperties() was called.
     */
    inline sal_Bool hasProperty( sal_Int16 nIndex );

    /**
     * Get a value from the XPropertySet on demand.
     *
     * If neither getValues nor getValueOnDemand has been called already
     * after the last call to resetValues, the values are retrieved
     * using getValues. Otherwise the value already retrieved is returned.
     * In case XMultiPropertySet is supported by the XPropertySet and
     * bTryMult is set, the XMultiPropertySet is used to get the values.
     *
     */
    const ::com::sun::star::uno::Any& getValue( sal_Int16 nIndex,
                        const ::com::sun::star::uno::Reference<
                            ::com::sun::star::beans::XPropertySet> &,
                        sal_Bool bTryMulti = sal_False );

    /**
     * Get a value from the XMultiPropertySet on demand.
     *
     * If neither getValues nor getValueOnDemand has been called already
     * after the last call to resetValues, the values are retrieved
     * using getValues. Otherwise the value already retrieved is returned.
     * In case XMultiPropertySet is supported by the XPropertySet,
     * XMultiPropertySet is used to get the values.
     *
     */
    const ::com::sun::star::uno::Any& getValue( sal_Int16 nIndex,
                        const ::com::sun::star::uno::Reference<
                            ::com::sun::star::beans::XMultiPropertySet> & );

    inline void resetValues() { pValues = 0; }
};


// inline implementations of the often-called methods getValue and hasProperty:

const ::com::sun::star::uno::Any& MultiPropertySetHelper::getValue(
    sal_Int16 nValueNo )
{
    DBG_ASSERT( pValues != NULL,
                "called getValue() without calling getValues() before");
    DBG_ASSERT( pSequenceIndex != NULL,
                "called getValue() without calling hasProperties() before" );
    DBG_ASSERT( nValueNo < nLength, "index out of range" );

    sal_Int16 nIndex = pSequenceIndex[ nValueNo ];
    return ( nIndex != -1 ) ? pValues[ nIndex ] : aEmptyAny;
}

sal_Bool MultiPropertySetHelper::hasProperty( sal_Int16 nValueNo )
{
    DBG_ASSERT( pSequenceIndex != NULL,
                "called getValue() without calling hasProperties() before" );
    DBG_ASSERT( nValueNo < nLength, "index out of range" );

    return pSequenceIndex[ nValueNo ] != -1;
}

#endif