/************************************************************************* * * $RCSfile: padialog.cxx,v $ * * $Revision: 1.5 $ * * last change: $Author: pl $ $Date: 2001-06-19 13:47:44 $ * * The Contents of this file are made available subject to the terms of * either of the following licenses * * - GNU Lesser General Public License Version 2.1 * - Sun Industry Standards Source License Version 1.1 * * Sun Microsystems Inc., October, 2000 * * GNU Lesser General Public License Version 2.1 * ============================================= * Copyright 2000 by Sun Microsystems, Inc. * 901 San Antonio Road, Palo Alto, CA 94303, USA * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public * License version 2.1, as published by the Free Software Foundation. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public * License along with this library; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * * * Sun Industry Standards Source License Version 1.1 * ================================================= * The contents of this file are subject to the Sun Industry Standards * Source License Version 1.1 (the "License"); You may not use this file * except in compliance with the License. You may obtain a copy of the * License at http://www.openoffice.org/license.html. * * Software provided under this License is provided on an "AS IS" basis, * WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, * WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS, * MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING. * See the License for the specific provisions governing your rights and * obligations concerning the Software. * * The Initial Developer of the Original Code is: Sun Microsystems, Inc. * * Copyright: 2000 by Sun Microsystems, Inc. * * All Rights Reserved. * * Contributor(s): _______________________________________ * * ************************************************************************/ #include #include #include #include #include #ifndef _SV_MSGBOX_HXX #include #endif #ifndef _SV_PRINT_HXX #include #endif #ifndef _SV_GRADIENT_HXX #include #endif #ifndef _SV_BITMAP_HXX #include #endif #ifndef _SV_LINEINFO_HXX #include #endif #ifndef _SV_SVAPP_HXX #include #endif #ifndef _STREAM_HXX #include #endif #ifndef _TOOLS_COLOR_HXX #include #endif #ifndef _PAD_PADIALOG_HRC_ #include #endif #ifndef _PAD_FONTENTRY_HXX_ #include #endif #ifndef _PAD_HELPER_HXX_ #include #endif #ifndef _PSP_PRINTERINFOMANAGER_HXX_ #include #endif #ifndef _PAD_PADIALOG_HXX_ #include #endif #ifndef _PAD_ADDDLG_HXX_ #include #endif #ifndef _PAD_PRTSETUP_HXX_ #include #endif #ifndef _OSL_FILE_HXX_ #include #endif using namespace psp; using namespace rtl; using namespace padmin; using namespace osl; PADialog* PADialog::Create( Window* pParent, BOOL bAdmin ) { return new PADialog( pParent, bAdmin ); } PADialog::PADialog( Window* pParent, BOOL bAdmin ) : ModalDialog( pParent, PaResId( RID_PADIALOG ) ), m_aAddPB( this, PaResId( RID_PA_BTN_ADD ) ), m_aCancelButton( this, PaResId( RID_PA_BTN_CANCEL ) ), m_aDevicesLB( this, PaResId( RID_PA_LB_DEV ) ), m_aStdPB( this, PaResId( RID_PA_BTN_STD ) ), m_aRemPB( this, PaResId( RID_PA_BTN_DEL ) ), m_aPrintersFL( this, PaResId( RID_PA_FL_PRINTERS ) ), m_aFontsPB( this, PaResId( RID_PA_BTN_FONTS ) ), m_aConfPB( this, PaResId( RID_PA_BTN_CONF ) ), m_aRenamePB( this, PaResId( RID_PA_BTN_RENAME ) ), m_aTestPagePB( this, PaResId( RID_PA_TESTPAGE ) ), m_aDriverTxt( this, PaResId( RID_PA_TXT_DRIVER ) ), m_aSepButtonFL( this, PaResId( RID_PA_FL_SEPBUTTON ) ), m_aDriver( this, PaResId( RID_PA_TXT_DRIVER_STRING ) ), m_aLocationTxt( this, PaResId( RID_PA_TXT_LOCATION ) ), m_aLocation( this, PaResId( RID_PA_TXT_LOCATION_STRING ) ), m_aCommandTxt( this, PaResId( RID_PA_TXT_COMMAND ) ), m_aCommand( this, PaResId( RID_PA_TXT_COMMAND_STRING ) ), m_aCommentTxt( this, PaResId( RID_PA_TXT_COMMENT ) ), m_aComment( this, PaResId( RID_PA_TXT_COMMENT_STRING ) ), m_aDefPrt( PaResId( RID_PA_STR_DEFPRT ) ), m_aRenameStr( PaResId( RID_PA_STR_RENAME ) ), m_aPrinterImg( Bitmap( PaResId( RID_BMP_SMALL_PRINTER ) ), Color( 0xff, 0x00, 0xff ) ), m_aFaxImg( Bitmap( PaResId( RID_BMP_SMALL_FAX ) ), Color( 0xff, 0x00, 0xff ) ), m_aPdfImg( Bitmap( PaResId( RID_BMP_SMALL_PDF ) ), Color( 0xff, 0x00, 0xff ) ), m_pPrinter( 0 ), m_rPIManager( PrinterInfoManager::get() ) { Init(); FreeResource(); } void PADialog::Init() { UpdateDevice(); UpdateText(); m_aRemPB.Enable( FALSE ); m_aDevicesLB.SetDoubleClickHdl( LINK( this, PADialog, DoubleClickHdl ) ); m_aDevicesLB.SetSelectHdl( LINK( this, PADialog, SelectHdl ) ); m_aStdPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aRemPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aConfPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aRenamePB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aTestPagePB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aFontsPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aAddPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aDevicesLB.setDelPressedLink( LINK( this, PADialog, DelPressedHdl ) ); ::psp::PrintFontManager& rFontManager( ::psp::PrintFontManager::get() ); if( ! rFontManager.checkImportPossible() ) m_aFontsPB.Enable( FALSE ); } PADialog::~PADialog() { m_rPIManager.writePrinterConfig(); freePadminRC(); } String PADialog::getSelectedDevice() { int nPos = m_aDevicesLB.GetSelectEntryPos(); int nLen = (int)m_aDevicesLB.GetEntryData( nPos ); return m_aDevicesLB.GetEntry( nPos ).Copy( 0, nLen ); } IMPL_LINK( PADialog, DelPressedHdl, ListBox*, pBox ) { if( pBox == &m_aDevicesLB && m_aRemPB.IsEnabled() ) ClickBtnHdl( &m_aRemPB ); return 0; } IMPL_LINK( PADialog, ClickBtnHdl, PushButton*, pButton ) { if( pButton == &m_aStdPB ) UpdateDefPrt(); else if( pButton == &m_aRemPB && AreYouSure( this, RID_QUERY_REMOVEPRINTER ) ) RemDevice(); else if( pButton == &m_aConfPB ) ConfigureDevice(); else if( pButton == &m_aRenamePB ) RenameDevice(); else if( pButton == &m_aTestPagePB ) PrintTestPage(); else if( pButton == &m_aAddPB ) AddDevice(); else if( pButton == &m_aFontsPB ) { FontNameDlg aDialog( this ); aDialog.Execute(); } return 0; } IMPL_LINK( PADialog, DoubleClickHdl, ListBox*, pListBox ) { if( pListBox == &m_aDevicesLB ) UpdateDefPrt(); return 0; } IMPL_LINK( PADialog, SelectHdl, ListBox*, pListBox ) { if( pListBox == &m_aDevicesLB ) { String sSelect = getSelectedDevice(); String sDefPrt = m_rPIManager.getDefaultPrinter(); if( sDefPrt == sSelect || ! m_rPIManager.removePrinter( sSelect, true ) ) m_aRemPB.Enable( FALSE ); else m_aRemPB.Enable( TRUE ); UpdateText(); } return 0; } IMPL_LINK( PADialog, EndPrintHdl, void*, pNil ) { String aInfoString( PaResId( RID_PA_TXT_TESTPAGE_PRINTED ) ); InfoBox aInfoBox( this, aInfoString ); aInfoBox.SetText( String( PaResId( RID_BXT_TESTPAGE ) ) ); aInfoBox.Execute(); delete m_pPrinter; m_pPrinter = NULL; return 0; } void PADialog::UpdateDefPrt() { m_rPIManager.setDefaultPrinter( getSelectedDevice() ); UpdateDevice(); UpdateText(); if( m_aRemPB.HasFocus() ) m_aDevicesLB.GetFocus(); m_aRemPB.Enable( FALSE ); } void PADialog::UpdateText() { const PrinterInfo& rInfo = m_rPIManager.getPrinterInfo( getSelectedDevice() ); String aDriver( rInfo.m_aPrinterName ); aDriver.AppendAscii( " (" ); aDriver += String( rInfo.m_aDriverName ); aDriver.Append( ')' ); m_aDriver.SetText( aDriver ); m_aCommand.SetText( rInfo.m_aCommand ); m_aComment.SetText( rInfo.m_aComment ); m_aLocation.SetText( rInfo.m_aLocation ); } static Point project( const Point& rPoint ) { const double angle_x = M_PI / 6.0; const double angle_z = M_PI / 6.0; // transform planar coordinates to 3d double x = rPoint.X(); double y = rPoint.Y(); double z = 0; // rotate around X axis double x1 = x; double y1 = y * cos( angle_x ); double z1 = y * sin( angle_x ); // rotate around Z axis double x2 = x1 * cos( angle_z ) + y1 * sin( angle_z ); double y2 = y1 * cos( angle_z ) - x1 * sin( angle_z ); double z2 = z1; return Point( x2, z2 ); } static Color approachColor( const Color& rFrom, const Color& rTo ) { Color aColor; UINT8 nDiff; // approach red if( rFrom.GetRed() < rTo.GetRed() ) { nDiff = rTo.GetRed() - rFrom.GetRed(); aColor.SetRed( rFrom.GetRed() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetRed() > rTo.GetRed() ) { nDiff = rFrom.GetRed() - rTo.GetRed(); aColor.SetRed( rFrom.GetRed() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetRed( rFrom.GetRed() ); // approach Green if( rFrom.GetGreen() < rTo.GetGreen() ) { nDiff = rTo.GetGreen() - rFrom.GetGreen(); aColor.SetGreen( rFrom.GetGreen() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetGreen() > rTo.GetGreen() ) { nDiff = rFrom.GetGreen() - rTo.GetGreen(); aColor.SetGreen( rFrom.GetGreen() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetGreen( rFrom.GetGreen() ); // approach blue if( rFrom.GetBlue() < rTo.GetBlue() ) { nDiff = rTo.GetBlue() - rFrom.GetBlue(); aColor.SetBlue( rFrom.GetBlue() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetBlue() > rTo.GetBlue() ) { nDiff = rFrom.GetBlue() - rTo.GetBlue(); aColor.SetBlue( rFrom.GetBlue() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetBlue( rFrom.GetBlue() ); return aColor; } #define DELTA 5.0 void PADialog::PrintTestPage() { if( m_pPrinter ) // already printing; user pressed button twice return; rtl_TextEncoding aEncoding = gsl_getSystemTextEncoding(); String sPrinter( getSelectedDevice() ); m_pPrinter = new Printer( sPrinter ); PrinterInfo aInfo( m_rPIManager.getPrinterInfo( sPrinter ) ); const PPDParser* pPrintParser = aInfo.m_pParser; MapMode aMapMode( MAP_100TH_MM ); Bitmap aButterfly( PaResId( RID_BUTTERFLY ) ); m_pPrinter->SetMapMode( aMapMode ); m_pPrinter->SetEndPrintHdl( LINK( this, PADialog, EndPrintHdl ) ); String aJobName( String( RTL_CONSTASCII_USTRINGPARAM( "StarOffice Test" ) ) ); if( m_pPrinter->GetName() != sPrinter || ! m_pPrinter->StartJob( aJobName ) ) { String aString( PaResId( RID_ERR_NOPRINTER ) ); aString.SearchAndReplaceAscii( "%s", sPrinter ); ErrorBox aErrorBox( this, WB_OK | WB_DEF_OK, aString ); aErrorBox.SetText( String( PaResId( RID_BXT_ENVIRONMENT ) ) ); aErrorBox.Execute(); delete m_pPrinter; m_pPrinter = 0; return; } m_pPrinter->StartPage(); Size aPaperSize=m_pPrinter->GetOutputSize(); Point aCenter( aPaperSize.Width()/2-300, aPaperSize.Height() - aPaperSize.Width()/2 ); Point aP1( aPaperSize.Width()/48, 0), aP2( aPaperSize.Width()/40, 0 ), aPoint; m_pPrinter->DrawRect( Rectangle( Point( 0,0 ), aPaperSize ) ); m_pPrinter->DrawRect( Rectangle( Point( 100,100 ), Size( aPaperSize.Width()-200, aPaperSize.Height()-200 ) ) ); m_pPrinter->DrawRect( Rectangle( Point( 200,200 ), Size( aPaperSize.Width()-400, aPaperSize.Height()-400 ) ) ); m_pPrinter->DrawRect( Rectangle( Point( 300,300 ), Size( aPaperSize.Width()-600, aPaperSize.Height()-600 ) ) ); Font aFont( m_pPrinter->GetFont() ); aFont.SetName( String( RTL_CONSTASCII_USTRINGPARAM( "Courier" ) ) ); aFont.SetWeight( WEIGHT_NORMAL ); aFont.SetItalic( ITALIC_NONE ); m_pPrinter->SetFont( aFont ); String aPrintText; long nWidth = 0, nMaxWidth = 0; String aToken; aToken = String( PaResId( RID_TXT_TESTPAGE_NAME ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; aPrintText += '\n'; aToken = String( PaResId( RID_TXT_TESTPAGE_MODEL ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; aPrintText += '\n'; aPrintText.AppendAscii( "PPD" ); aPrintText += '\n'; aToken = String( PaResId( RID_TXT_TESTPAGE_QUEUE ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; aPrintText += '\n'; aToken = String( PaResId( RID_TXT_TESTPAGE_COMMENT ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; aPrintText += '\n'; aToken = String( PaResId( RID_TXT_TESTPAGE_DATE ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; aPrintText += '\n'; aToken = String( PaResId( RID_TXT_TESTPAGE_TIME ) ); nMaxWidth = ( nWidth = m_pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText += aToken; m_pPrinter->DrawText( Rectangle( Point( 1000, 2000 ), Size( aPaperSize.Width() - 2000, aPaperSize.Height() - 4000 ) ), aPrintText, TEXT_DRAW_MULTILINE ); aPrintText = String( RTL_CONSTASCII_USTRINGPARAM( ": " ) ); aPrintText += sPrinter; aPrintText.AppendAscii( "\n: " ); aPrintText += pPrintParser->getPrinterName(); aPrintText.AppendAscii( "\n: " ); INetURLObject aDriverPath( pPrintParser->getFilename(), INET_PROT_FILE, INetURLObject::ENCODE_ALL ); aPrintText += aDriverPath.GetName(); aPrintText.AppendAscii( "\n: " ); aPrintText += String( aInfo.m_aCommand ); aPrintText.AppendAscii( "\n: " ); aPrintText += String( aInfo.m_aComment ); aPrintText.AppendAscii( "\n: " ); aPrintText += Application::GetAppInternational().GetLongDate( Date() ); aPrintText.AppendAscii( "\n: " ); aPrintText += Application::GetAppInternational().GetTime( Time() ); m_pPrinter->DrawText( Rectangle( Point( 1100 + nMaxWidth, 2000 ), Size( aPaperSize.Width() - 2100 - nMaxWidth, aPaperSize.Height() - 4000 ) ), aPrintText, TEXT_DRAW_MULTILINE ); m_pPrinter->DrawBitmap( Point( aPaperSize.Width() - 4000, 1000 ), Size( 3000,3000 ), aButterfly ); m_pPrinter->SetFillColor(); m_pPrinter->DrawRect( Rectangle( Point( aPaperSize.Width() - 4000, 1000 ), Size( 3000,3000 ) ) ); Color aWhite( 0xff, 0xff, 0xff ); Color aBlack( 0, 0, 0 ); Color aLightRed( 0xff, 0, 0 ); Color aDarkRed( 0x40, 0, 0 ); Color aLightBlue( 0, 0, 0xff ); Color aDarkBlue( 0,0,0x40 ); Color aLightGreen( 0, 0xff, 0 ); Color aDarkGreen( 0, 0x40, 0 ); Gradient aGradient( GRADIENT_LINEAR, aBlack, aWhite ); aGradient.SetAngle( 900 ); m_pPrinter->DrawGradient( Rectangle( Point( 1000, 5500 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkRed ); aGradient.SetEndColor( aLightBlue ); m_pPrinter->DrawGradient( Rectangle( Point( 1000, 6300 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkBlue ); aGradient.SetEndColor( aLightGreen ); m_pPrinter->DrawGradient( Rectangle( Point( 1000, 7100 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkGreen ); aGradient.SetEndColor( aLightRed ); m_pPrinter->DrawGradient( Rectangle( Point( 1000, 7900 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); LineInfo aLineInfo( LINE_SOLID, 200 ); double sind = sin( DELTA*M_PI/180.0 ); double cosd = cos( DELTA*M_PI/180.0 ); double factor = 1 + (DELTA/1000.0); int n=0; Color aLineColor( 0, 0, 0 ); Color aApproachColor( 0, 0, 200 ); while ( aP2.X() < aCenter.X() && n++ < 680 ) { aLineInfo.SetWidth( n/3 ); aLineColor = approachColor( aLineColor, aApproachColor ); m_pPrinter->SetLineColor( aLineColor ); // switch aproach color if( aApproachColor.IsRGBEqual( aLineColor ) ) { if( aApproachColor.GetRed() ) aApproachColor = Color( 0, 0, 200 ); else if( aApproachColor.GetGreen() ) aApproachColor = Color( 200, 0, 0 ); else aApproachColor = Color( 0, 200, 0 ); } m_pPrinter->DrawLine( project( aP1 ) + aCenter, project( aP2 ) + aCenter, aLineInfo ); aPoint.X() = (((double)aP1.X())*cosd - ((double)aP1.Y())*sind)*factor; aPoint.Y() = (((double)aP1.Y())*cosd + ((double)aP1.X())*sind)*factor; aP1 = aPoint; aPoint.X() = (((double)aP2.X())*cosd - ((double)aP2.Y())*sind)*factor; aPoint.Y() = (((double)aP2.Y())*cosd + ((double)aP2.X())*sind)*factor; aP2 = aPoint; } #if defined DEBUG || defined DBG_UTIL fprintf( stderr, "%d lines\n",n ); #endif m_pPrinter->EndPage(); m_pPrinter->EndJob(); } void PADialog::AddDevice() { AddPrinterDialog aDlg( this ); if( aDlg.Execute() ) UpdateDevice(); } void PADialog::RemDevice() { String aPrinter( getSelectedDevice() ); String aDefPrinter( m_rPIManager.getDefaultPrinter() ); // do not remove the default printer if( aPrinter.Equals( aDefPrinter ) ) return; if( ! m_rPIManager.removePrinter( aPrinter ) ) { String aText( PaResId( RID_ERR_PRINTERNOTREMOVEABLE ) ); aText.SearchAndReplace( String( RTL_CONSTASCII_USTRINGPARAM( "%s" ) ), aPrinter ); ErrorBox aBox( this, WB_OK | WB_DEF_OK, aText ); aBox.Execute(); return; } m_aPrinters.remove( aPrinter ); m_aDevicesLB.RemoveEntry( m_aDevicesLB.GetSelectEntryPos() ); for( int i=0; i < m_aDevicesLB.GetEntryCount(); i++ ) { if( m_aDevicesLB.GetEntry( i ).CompareTo( aDefPrinter, aDefPrinter.Len() ) == COMPARE_EQUAL ) { m_aDevicesLB.SelectEntryPos( i, TRUE ); UpdateText(); break; } } m_aDevicesLB.GetFocus(); if( m_aDevicesLB.GetEntryCount() < 2 ) m_aRemPB.Enable( FALSE ); } void PADialog::ConfigureDevice() { String aPrinter( getSelectedDevice() ); if( ! aPrinter.Len() ) return; PrinterInfo aInfo( m_rPIManager.getPrinterInfo( aPrinter ) ); RTSDialog aDialog( aInfo, aPrinter, true, this ); if( aDialog.Execute() ) m_rPIManager.changePrinterInfo( aPrinter, aDialog.getSetup() ); UpdateText(); } void PADialog::RenameDevice() { rtl_TextEncoding aEncoding = gsl_getSystemTextEncoding(); String aPrinter( getSelectedDevice() ); OUString aOldPrinter( aPrinter ); int nSelectEntryPos = m_aDevicesLB.GetSelectEntryPos(); if( ! aPrinter.Len() ) return; QueryString aQuery( this, String( PaResId( RID_QRY_PRTNAME ) ), aPrinter ); aQuery.SetText( m_aRenameStr ); aQuery.Execute(); if( aPrinter.Len() ) { PrinterInfo aInfo( m_rPIManager.getPrinterInfo( aOldPrinter ) ); aInfo.m_aPrinterName = aPrinter; if( m_rPIManager.addPrinter( aPrinter, aInfo.m_aDriverName ) ) { bool bWasDefault = m_rPIManager.getDefaultPrinter() == aOldPrinter; m_aPrinters.push_back( aPrinter ); if( m_rPIManager.removePrinter( aOldPrinter ) ) m_aPrinters.remove( aOldPrinter ); m_rPIManager.changePrinterInfo( aPrinter, aInfo ); if( bWasDefault ) { m_rPIManager.setDefaultPrinter( aPrinter ); UpdateDefPrt(); } UpdateDevice(); } } } void PADialog::UpdateDevice() { rtl_TextEncoding aEncoding = gsl_getSystemTextEncoding(); m_aDevicesLB.Clear(); m_rPIManager.listPrinters( m_aPrinters ); ::std::list< OUString >::iterator it; for( it = m_aPrinters.begin(); it != m_aPrinters.end(); ++it ) { const PrinterInfo& rInfo( m_rPIManager.getPrinterInfo( *it ) ); sal_Int32 nIndex = 0; bool bAutoQueue = false; bool bFax = false; bool bPdf = false; while( nIndex != -1 && ! bAutoQueue ) { OUString aToken( rInfo.m_aFeatures.getToken( 0, ',', nIndex ) ); if( aToken.getLength() ) { if( aToken.compareToAscii( "autoqueue" ) == 0 ) bAutoQueue = true; else if( aToken.compareToAscii( "pdf=", 4 ) == 0 ) bPdf = true; else if( aToken.compareToAscii( "fax", 3 ) == 0 ) bFax = true; } } if( bAutoQueue ) continue; String aEntry( *it ); if( *it == m_rPIManager.getDefaultPrinter() ) { aEntry.AppendAscii( " (" ); aEntry += m_aDefPrt; aEntry.AppendAscii( ")" ); } int nPos = m_aDevicesLB.InsertEntry( aEntry, bFax ? m_aFaxImg : bPdf ? m_aPdfImg : m_aPrinterImg ); m_aDevicesLB.SetEntryData( nPos, (void*)it->getLength() ); if( *it == m_rPIManager.getDefaultPrinter() ) { m_aDevicesLB.SelectEntryPos( nPos ); UpdateText(); } } } // ------------------------------------------------------------------ // get a nice icon #include extern "C" void vcl_customIcon1( char **&iconRes1, char **&iconRes2, char **&iconRes3, char **&iconRes4 ) { iconRes1 = L3PSetup_m_pm; iconRes2 = NULL; iconRes3 = NULL; iconRes4 = NULL; }