/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef INCLUDED_VCL_PDFEXTOUTDEVDATA_HXX #define INCLUDED_VCL_PDFEXTOUTDEVDATA_HXX #include #include #include #include #include #include class Graphic; class GDIMetaFile; class SdrObject; struct SwEnhancedPDFState; struct ScEnhancedPDFState; namespace vcl { /* A PDFExtOutDevBookmarkEntry is being created by the EditEngine if a bookmark URL has been parsed. The Application is requested to take care of each bookmark entry by emptying out the bookmark vector. */ struct PDFExtOutDevBookmarkEntry { /** ID of the link pointing to the bookmark, or -1 if the entry denotes a destination instead of a link. */ sal_Int32 nLinkId; /** ID of the named destination denoted by the bookmark, or -1 if the entry denotes a link instead of a named destination. */ sal_Int32 nDestId; /** link target name, respectively destination name */ OUString aBookmark; PDFExtOutDevBookmarkEntry() :nLinkId( -1 ) ,nDestId( -1 ) { } }; /* Class that is being set at the OutputDevice allowing the application to send enhanced PDF commands like CreateLink */ struct PageSyncData; struct GlobalSyncData; class VCL_DLLPUBLIC PDFExtOutDevData final : public ExtOutDevData { const OutputDevice& mrOutDev; bool mbTaggedPDF; bool mbExportNotes; bool mbExportNotesInMargin; bool mbExportNotesPages; bool mbTransitionEffects; bool mbUseLosslessCompression; bool mbReduceImageResolution; bool mbExportFormFields; bool mbExportBookmarks; bool mbExportHiddenSlides; bool mbSinglePageSheets; bool mbExportNDests; //i56629 sal_Int32 mnPage; sal_Int32 mnCompressionQuality; css::lang::Locale maDocLocale; std::unique_ptr mpPageSyncData; std::unique_ptr mpGlobalSyncData; std::vector< PDFExtOutDevBookmarkEntry > maBookmarks; std::vector maChapterNames; // map from annotation SdrObject to annotation index ::std::map> m_ScreenAnnotations; SwEnhancedPDFState * m_pSwPDFState = nullptr; ScEnhancedPDFState * m_pScPDFState = nullptr; public: PDFExtOutDevData( const OutputDevice& rOutDev ); virtual ~PDFExtOutDevData() override; bool PlaySyncPageAct( PDFWriter& rWriter, sal_uInt32& rCurGDIMtfAction, const GDIMetaFile& rMtf ); void ResetSyncData(PDFWriter * pWriterIfRemoveTransparencies); void PlayGlobalActions( PDFWriter& rWriter ); bool GetIsExportNotes() const { return mbExportNotes;} void SetIsExportNotes( const bool bExportNotes ); bool GetIsExportNotesInMargin() const { return mbExportNotesInMargin;} void SetIsExportNotesInMargin( const bool bExportNotesInMargin ); bool GetIsExportNotesPages() const { return mbExportNotesPages;} void SetIsExportNotesPages( const bool bExportNotesPages ); bool GetIsExportTaggedPDF() const { return mbTaggedPDF;} void SetIsExportTaggedPDF( const bool bTaggedPDF ); bool GetIsExportTransitionEffects() const { return mbTransitionEffects;} void SetIsExportTransitionEffects( const bool bTransitionalEffects ); bool GetIsExportFormFields() const { return mbExportFormFields;} void SetIsExportFormFields( const bool bExportFormFields ); bool GetIsExportBookmarks() const { return mbExportBookmarks;} void SetIsExportBookmarks( const bool bExportBookmarks ); bool GetIsExportHiddenSlides() const { return mbExportHiddenSlides;} void SetIsExportHiddenSlides( const bool bExportHiddenSlides ); void SetIsSinglePageSheets( const bool bSinglePageSheets ); bool GetIsExportNamedDestinations() const { return mbExportNDests;} //i56629 void SetIsExportNamedDestinations( const bool bExportNDests ); //i56629 // PageNumber, Compression is being set by the PDFExport sal_Int32 GetCurrentPageNumber() const { return mnPage;} void SetCurrentPageNumber( const sal_Int32 nPage ); bool GetIsLosslessCompression() const { return mbUseLosslessCompression;} void SetIsLosslessCompression( const bool bLosslessCompression ); void SetCompressionQuality( const sal_Int32 nQuality ); bool GetIsReduceImageResolution() const { return mbReduceImageResolution;} void SetIsReduceImageResolution( const bool bReduceImageResolution ); const css::lang::Locale& GetDocumentLocale() const { return maDocLocale;} void SetDocumentLocale( const css::lang::Locale& rLoc ); std::vector< PDFExtOutDevBookmarkEntry >& GetBookmarks() { return maBookmarks;} const std::vector& GetChapterNames() const { return maChapterNames; } SwEnhancedPDFState * GetSwPDFState() { return m_pSwPDFState; } void SetSwPDFState(SwEnhancedPDFState *const pSwPDFState) { m_pSwPDFState = pSwPDFState; } ScEnhancedPDFState* GetScPDFState() { return m_pScPDFState; } void SetScPDFState(ScEnhancedPDFState* const pScPDFState) { m_pScPDFState = pScPDFState; } const Graphic& GetCurrentGraphic() const; /** Start a new group of render output Use this method to group render output. */ void BeginGroup(); /** End render output This method ends grouped render output, that can be represented by a GfxLink. This is typically used for external graphic files, such as JPEGs, EPS files etc. The BeginGroup/EndGroup calls must exactly enclose the relevant OutputDevice calls issued to render the graphic the normal way. @param rGraphic The link to the original graphic @param nTransparency Eight bit transparency value, with 0 denoting full opacity, and 255 full transparency. @param rOutputRect The output rectangle of the graphic. @param rVisibleOutputRect The visible part of the output. This might be less than rOutputRect, e.g. for cropped graphics. */ void EndGroup( const Graphic& rGraphic, sal_uInt8 nTransparency, const tools::Rectangle& rOutputRect, const tools::Rectangle& rVisibleOutputRect ); /// Detect if stream is compressed enough to avoid de-compress / scale & re-compress bool HasAdequateCompression( const Graphic &rGraphic, const tools::Rectangle &rOutputRect, const tools::Rectangle &rVisibleOutputRect ) const; //--->i56629 /** Create a new named destination to be used in a link to this document from another PDF document (see PDF spec 1.4, 8.2.1) @param sDestName the name this destination will be addressed with from others PDF document @param rRect target rectangle on page to be displayed if dest is jumped to @param nPageNr number of page the dest is on (as returned by NewPage) or -1 in which case the current page is used @returns the destination id (to be used in SetLinkDest) or -1 if page id does not exist */ sal_Int32 CreateNamedDest( const OUString& sDestName, const tools::Rectangle& rRect, sal_Int32 nPageNr = -1 ); /** registers a destination for which a destination ID needs to be known immediately, instead of later on setting it via SetLinkDest. This is used in contexts where a destination is referenced by means other than a link. Later in the export process, a call to DescribeRegisteredDest must be made, providing the information about the destination. @return the unique Id of the destination */ sal_Int32 RegisterDest(); /** provides detailed information about a destination range which previously has been registered using RegisterDest. */ void DescribeRegisteredDest( sal_Int32 nDestId, const tools::Rectangle& rRect, sal_Int32 nPageNr, PDFWriter::DestAreaType eType = PDFWriter::DestAreaType::XYZ ); //<---i56629 /** Create a new destination to be used in a link @param rRect target rectangle on page to be displayed if dest is jumped to @param nPageNr number of page the dest is on (as returned by NewPage) or -1 in which case the current page is used @param eType what dest type to use @returns the destination id (to be used in SetLinkDest) or -1 if page id does not exist */ sal_Int32 CreateDest( const tools::Rectangle& rRect, sal_Int32 nPageNr = -1, PDFWriter::DestAreaType eType = PDFWriter::DestAreaType::XYZ ); /** Create a new link on a page @param rRect active rectangle of the link (that is the area that has to be hit to activate the link) @param nPageNr number of page the link is on (as returned by NewPage) or -1 in which case the current page is used @param rAltText Alt text for the link @returns the link id (to be used in SetLinkDest, SetLinkURL) or -1 if page id does not exist */ sal_Int32 CreateLink(const tools::Rectangle& rRect, OUString const& rAltText, sal_Int32 nPageNr = -1); /// Create a Screen annotation. sal_Int32 CreateScreen(const tools::Rectangle& rRect, OUString const& rAltText, OUString const& rMimeType, sal_Int32 nPageNr, SdrObject const* pObj); /// Get back the annotations created for one SdrObject. ::std::vector const& GetScreenAnnotIds(SdrObject const* pObj) const; /** Set the destination for a link

will change a URL type link to a dest link if necessary

@param nLinkId the link to be changed @param nDestId the dest the link shall point to */ void SetLinkDest( sal_Int32 nLinkId, sal_Int32 nDestId ); /** Set the URL for a link

will change a dest type link to a URL type link if necessary

@param nLinkId the link to be changed @param rURL the URL the link shall point to. there will be no error checking or any kind of conversion done to this parameter except this: it will be output as 7bit Ascii. The URL will appear literally in the PDF file produced */ void SetLinkURL( sal_Int32 nLinkId, const OUString& rURL ); /// Set URL for a linked Screen annotation. void SetScreenURL(sal_Int32 nScreenId, const OUString& rURL); /// Set URL for an embedded Screen annotation. void SetScreenStream(sal_Int32 nScreenId, const OUString& rURL); /** Create a new outline item @param nParent declares the parent of the new item in the outline hierarchy. An invalid value will result in a new toplevel item. @param rText sets the title text of the item @param nDestID declares which Dest (created with CreateDest) the outline item will point to @returns the outline item id of the new item */ sal_Int32 CreateOutlineItem( sal_Int32 nParent, const OUString& rText, sal_Int32 nDestID ); /** Create a new note on a page @param rRect active rectangle of the note (that is the area that has to be hit to popup the annotation) @param rNote specifies the contents of the note @param nPageNr number of page the note is on (as returned by NewPage) or -1 in which case the current page is used */ void CreateNote( const tools::Rectangle& rRect, const PDFNote& rNote, sal_Int32 nPageNr = -1 ); /** begin a new logical structure element BeginStructureElement/EndStructureElement calls build the logical structure of the PDF - the basis for tagged PDF. Structural elements are implemented using marked content tags. Each structural element can contain sub elements (e.g. a section can contain a heading and a paragraph). The structure hierarchy is build automatically from the Begin/EndStructureElement calls. The easy way is to call WrapBeginStructureElement, but it's also possible to call EnsureStructureElement/InitStructureElement/BeginStructureElement (its 3 parts) manually for more control; this way a placeholder SE can be inserted and initialised later. A structural element need not be contained on one page; e.g. paragraphs often run from one page to the next. In this case the corresponding EndStructureElement must be called while drawing the next page. BeginStructureElement and EndStructureElement must be called only after PDFWriter::NewPage has been called and before PDFWriter::Emit gets called. The current page number is an implicit context parameter for Begin/EndStructureElement. For pagination artifacts that are not part of the logical structure of the document (like header, footer or page number) the special StructElement NonStructElement exists. To place content outside of the structure tree simply call BeginStructureElement( NonStructElement ) then draw your content and then call EndStructureElement(). Any children of a NonStructElement will not be part of the structure as well. @param eType denotes what kind of element to begin (e.g. a heading or paragraph) @param rAlias the specified alias will be used as structure tag. Also an entry in the PDF's role map will be created mapping alias to regular structure type. @returns the id of the newly created structural element */ sal_Int32 WrapBeginStructureElement(PDFWriter::StructElement eType, const OUString& rAlias = OUString()); sal_Int32 EnsureStructureElement(void const* key); void InitStructureElement(sal_Int32 id, PDFWriter::StructElement eType, const OUString& rAlias); void BeginStructureElement(sal_Int32 id); /** end a logical structure element @see BeginStructureElement */ void EndStructureElement(); /** set the current structure element

For different purposes it may be useful to paint a structure element's content discontinuously. In that case an already existing structure element can be appended to by using SetCurrentStructureElement. The referenced structure element becomes the current structure element with all consequences: all following structure elements are appended as children of the current element.

@param nElement the id of the new current structure element, which must be valid */ void SetCurrentStructureElement( sal_Int32 nElement ); /** get the current structure element id @returns the id of the current structure element */ sal_Int32 GetCurrentStructureElement() const; /** set a structure attribute on the current structural element SetStructureAttribute sets an attribute of the current structural element to a new value. A consistency check is performed before actually setting the value; if the check fails, the function returns False and the attribute remains unchanged. @param eAttr denotes what attribute to change @param eVal the value to set the attribute to */ void SetStructureAttribute( PDFWriter::StructAttribute eAttr, PDFWriter::StructAttributeValue eVal ); /** set a structure attribute on the current structural element SetStructureAttributeNumerical sets an attribute of the current structural element to a new numerical value. A consistency check is performed before actually setting the value; if the check fails, the function returns False and the attribute remains unchanged. @param eAttr denotes what attribute to change @param nValue the value to set the attribute to */ void SetStructureAttributeNumerical( PDFWriter::StructAttribute eAttr, sal_Int32 nValue ); /** set the bounding box of a structural element SetStructureBoundingBox sets the BBox attribute to a new value. Since the BBox attribute can only be applied to Table, Figure, Form and Formula elements, a call of this function for other element types will be ignored and the BBox attribute not be set. @param rRect the new bounding box for the structural element */ void SetStructureBoundingBox( const tools::Rectangle& rRect ); /** set the annotations that should be referenced as children of the current structural element. */ void SetStructureAnnotIds(::std::vector const& rAnnotIds); /** set the ActualText attribute of a structural element ActualText contains the Unicode text without layout artifacts that is shown by a structural element. For example if a line is ended prematurely with a break in a word and continued on the next line (e.g. "happen-stance") the corresponding ActualText would contain the unbroken line (e.g. "happenstance"). @param rText contains the complete logical text the structural element displays. */ void SetActualText( const OUString& rText ); /** set the Alt attribute of a structural element Alt is s replacement text describing the contents of a structural element. This is mainly used by accessibility applications; e.g. a screen reader would read the Alt replacement text for an image to a visually impaired user. @param rText contains the replacement text for the structural element */ void SetAlternateText( const OUString& rText ); /** Sets the transitional effect to be applied when the current page gets shown. @param eType the kind of effect to be used; use Regular to disable transitional effects for this page @param nMilliSec the duration of the transitional effect in milliseconds; set 0 to disable transitional effects */ void SetPageTransition( PDFWriter::PageTransition eType, sal_uInt32 nMilliSec ); /** create a new form control This function creates a new form control in the PDF and sets its various properties. Do not pass an actual AnyWidget as rControlType will be cast to the type described by the type member. @param rControlType a descendant of AnyWidget determining the control's properties */ void CreateControl( const PDFWriter::AnyWidget& rControlType ); }; } #endif /* vim:set shiftwidth=4 softtabstop=4 expandtab: */