office-gobmx/include/svx/unoshape.hxx
Noel Grandin 451a66438a use more concrete UNO types in chart2
Change-Id: Id2d58ad76b6e8ff569bd7b65f86a7fdd0152f3d5
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/173324
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2024-09-13 18:51:41 +02:00

858 lines
39 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#ifndef INCLUDED_SVX_UNOSHAPE_HXX
#define INCLUDED_SVX_UNOSHAPE_HXX
#include <memory>
#include <com/sun/star/document/XActionLockable.hpp>
#include <com/sun/star/drawing/XEnhancedCustomShapeDefaulter.hpp>
#include <com/sun/star/drawing/XGluePointsSupplier.hpp>
#include <com/sun/star/drawing/XShape.hpp>
#include <com/sun/star/lang/XComponent.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/beans/XPropertyState.hpp>
#include <com/sun/star/lang/XServiceInfo.hpp>
#include <com/sun/star/lang/XUnoTunnel.hpp>
#include <com/sun/star/awt/Point.hpp>
#include <com/sun/star/drawing/PolygonKind.hpp>
#include <com/sun/star/drawing/XShapes.hpp>
#include <com/sun/star/drawing/XShapes2.hpp>
#include <com/sun/star/drawing/XShapeGroup.hpp>
#include <com/sun/star/container/XNamed.hpp>
#include <com/sun/star/container/XChild.hpp>
#include <com/sun/star/beans/XMultiPropertySet.hpp>
#include <com/sun/star/beans/XMultiPropertyStates.hpp>
#include <com/sun/star/drawing/XConnectorShape.hpp>
#include <com/sun/star/drawing/XControlShape.hpp>
#include <basegfx/polygon/b2dpolypolygon.hxx>
#include <sal/types.h>
#include <svl/lstner.hxx>
#include <editeng/unoipset.hxx>
#include <svx/svxdllapi.h>
#include <rtl/ref.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <editeng/unotext.hxx>
#include <svx/svdobj.hxx>
#include <unotools/weakref.hxx>
#include <comphelper/servicehelper.hxx>
#include <cppuhelper/implbase12.hxx>
class SfxItemSet;
class SdrModel;
class SvxDrawPage;
class SvGlobalName;
class Pair;
// Dimension arrows change size/position on save/reload (#i59051#)
namespace basegfx
{
class B2DPolyPolygon;
} // end of namespace basegfx
struct SvxShapeImpl;
class SvxShapeMaster;
class SvxItemPropertySet;
class SfxItemSet;
void SVXCORE_DLLPUBLIC SvxItemPropertySet_setPropertyValue( const SfxItemPropertyMapEntry* pMap,
const css::uno::Any& rVal, SfxItemSet& rSet );
css::uno::Any SVXCORE_DLLPUBLIC SvxItemPropertySet_getPropertyValue( const SfxItemPropertyMapEntry* pMap, const SfxItemSet& rSet );
// WARNING: if you update the supported interfaces,
// also update SvxShape::_getTypes()
typedef ::cppu::WeakAggImplHelper12<
css::drawing::XShape,
css::lang::XComponent,
css::beans::XPropertySet,
css::beans::XMultiPropertySet,
css::beans::XPropertyState,
css::lang::XUnoTunnel,
css::container::XNamed,
css::drawing::XGluePointsSupplier,
css::container::XChild,
css::lang::XServiceInfo,
css::document::XActionLockable,
css::beans::XMultiPropertyStates> SvxShape_UnoImplHelper;
class SVXCORE_DLLPUBLIC SvxShape :
public SvxShape_UnoImplHelper,
public SfxListener
{
protected:
friend class SvxDrawPage;
friend class SvxShapeConnector;
friend class SdXShape;
// translations for writer, which works in TWIPS
void ForceMetricToItemPoolMetric(Pair& rPoint) const noexcept;
void ForceMetricToItemPoolMetric(Point& rPoint) const noexcept { ForceMetricToItemPoolMetric(rPoint.toPair()); }
void ForceMetricToItemPoolMetric(Size& rPoint) const noexcept { ForceMetricToItemPoolMetric(rPoint.toPair()); }
void ForceMetricTo100th_mm(Pair& rPoint) const noexcept;
void ForceMetricTo100th_mm(Point& rPoint) const noexcept { ForceMetricTo100th_mm(rPoint.toPair()); }
void ForceMetricTo100th_mm(Size& rPoint) const noexcept { ForceMetricTo100th_mm(rPoint.toPair()); }
// version for basegfx::B2DPolyPolygon
void ForceMetricToItemPoolMetric(basegfx::B2DPolyPolygon& rPolyPolygon) const noexcept;
void ForceMetricTo100th_mm(basegfx::B2DPolyPolygon& rPolyPolygon) const noexcept;
// tdf#117145 version for basegfx::B2DHomMatrix
void ForceMetricToItemPoolMetric(basegfx::B2DHomMatrix& rB2DHomMatrix) const noexcept;
void ForceMetricTo100th_mm(basegfx::B2DHomMatrix& rB2DHomMatrix) const noexcept;
css::uno::Any GetAnyForItem( SfxItemSet const & aSet, const SfxItemPropertyMapEntry* pMap ) const;
bool SetFillAttribute( sal_uInt16 nWID, const OUString& rName );
/** called from the XActionLockable interface methods on initial locking */
virtual void lock();
/** called from the XActionLockable interface methods on final unlock */
virtual void unlock();
std::span<const SfxItemPropertyMapEntry> getPropertyMapEntries() const { return maPropMapEntries; }
void updateShapeKind();
void endSetPropertyValues();
// override these for special property handling in subcasses. Return true if property is handled
/// @throws css::beans::UnknownPropertyException
/// @throws css::beans::PropertyVetoException
/// @throws css::lang::IllegalArgumentException
/// @throws css::lang::WrappedTargetException
/// @throws css::uno::RuntimeException
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue );
/// @throws css::beans::UnknownPropertyException
/// @throws css::lang::WrappedTargetException
/// @throws css::uno::RuntimeException
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue );
/// @throws css::beans::UnknownPropertyException
/// @throws css::uno::RuntimeException
virtual bool getPropertyStateImpl( const SfxItemPropertyMapEntry* pProperty, css::beans::PropertyState& rState );
/// @throws css::beans::UnknownPropertyException
/// @throws css::uno::RuntimeException
virtual bool setPropertyToDefaultImpl( const SfxItemPropertyMapEntry* pProperty );
public:
/// @throws css::uno::RuntimeException
SvxShape( SdrObject* pObj );
/// @throws css::uno::RuntimeException
SvxShape( SdrObject* pObject, std::span<const SfxItemPropertyMapEntry> pEntries, const SvxItemPropertySet* pPropertySet );
virtual ~SvxShape() noexcept override;
// Internals
void ObtainSettingsFromPropertySet(const SvxItemPropertySet& rPropSet);
virtual void Create( SdrObject* pNewOpj, SvxDrawPage* pNewPage );
// used exclusively by SdrObject
void InvalidateSdrObject();
// Encapsulated access to SdrObject
SdrObject* GetSdrObject() const { return mxSdrObject.get(); }
bool HasSdrObject() const { return mxSdrObject.is(); }
void SetShapeType( const OUString& ShapeType ) { maShapeType = ShapeType; }
/// @throws css::uno::RuntimeException
css::uno::Any GetBitmap( bool bMetaFile = false ) const;
void notifyPropertyChange(const OUString& rPropName);
void setShapeKind( SdrObjKind nKind );
SdrObjKind getShapeKind() const;
// styles need this
static bool SetFillAttribute( sal_uInt16 nWID, const OUString& rName, SfxItemSet& rSet, SdrModel const * pModel );
static bool SetFillAttribute( sal_uInt16 nWID, const OUString& rName, SfxItemSet& rSet );
/** same as SetFillAttribute but for property names instead of which ids,
and the property found is returned instead of set at the object
directly.
*/
UNO3_GETIMPLEMENTATION_DECL( SvxShape )
// access methods for master objects
/// @throws css::uno::RuntimeException
rtl::Reference< SfxItemPropertySetInfo > const & _getPropertySetInfo( );
/// @throws css::beans::UnknownPropertyException
/// @throws css::beans::PropertyVetoException
/// @throws css::lang::IllegalArgumentException
/// @throws css::lang::WrappedTargetException
/// @throws css::uno::RuntimeException
void _setPropertyValue( const OUString& aPropertyName, const css::uno::Any& aValue );
/// @throws css::beans::UnknownPropertyException
/// @throws css::lang::WrappedTargetException
/// @throws css::uno::RuntimeException
css::uno::Any _getPropertyValue( const OUString& PropertyName );
/// @throws css::beans::UnknownPropertyException
/// @throws css::uno::RuntimeException
css::beans::PropertyState _getPropertyState( const OUString& PropertyName );
/// @throws css::beans::UnknownPropertyException
/// @throws css::uno::RuntimeException
void _setPropertyToDefault( const OUString& PropertyName );
/// @throws css::beans::UnknownPropertyException
/// @throws css::lang::WrappedTargetException
/// @throws css::uno::RuntimeException
css::uno::Any _getPropertyDefault( const OUString& aPropertyName );
/// @throws css::uno::RuntimeException
css::uno::Sequence< OUString > _getSupportedServiceNames();
/// @throws css::uno::RuntimeException
css::uno::Sequence< css::uno::Type > const & _getTypes( );
void setMaster( SvxShapeMaster* pMaster );
// SfxListener
virtual void Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) noexcept override final;
// XAggregation
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type& aType ) override;
// XNamed
virtual OUString SAL_CALL getName( ) override;
virtual void SAL_CALL setName( const OUString& aName ) override;
// XShapeDescriptor
virtual OUString SAL_CALL getShapeType() override;
// XShape
virtual css::awt::Point SAL_CALL getPosition() override;
virtual void SAL_CALL setPosition( const css::awt::Point& aPosition ) override;
virtual css::awt::Size SAL_CALL getSize() override;
virtual void SAL_CALL setSize( const css::awt::Size& aSize ) override;
// XComponent
virtual void SAL_CALL dispose() override;
virtual void SAL_CALL addEventListener( const css::uno::Reference< css::lang::XEventListener >& xListener ) override;
virtual void SAL_CALL removeEventListener( const css::uno::Reference< css::lang::XEventListener >& aListener ) override;
// XPropertySet
virtual css::uno::Reference< css::beans::XPropertySetInfo > SAL_CALL getPropertySetInfo( ) override;
virtual void SAL_CALL setPropertyValue( const OUString& aPropertyName, const css::uno::Any& aValue ) override;
virtual css::uno::Any SAL_CALL getPropertyValue( const OUString& PropertyName ) override;
virtual void SAL_CALL addPropertyChangeListener( const OUString& aPropertyName, const css::uno::Reference< css::beans::XPropertyChangeListener >& xListener ) override;
virtual void SAL_CALL removePropertyChangeListener( const OUString& aPropertyName, const css::uno::Reference< css::beans::XPropertyChangeListener >& aListener ) override;
virtual void SAL_CALL addVetoableChangeListener( const OUString& PropertyName, const css::uno::Reference< css::beans::XVetoableChangeListener >& aListener ) override;
virtual void SAL_CALL removeVetoableChangeListener( const OUString& PropertyName, const css::uno::Reference< css::beans::XVetoableChangeListener >& aListener ) override;
// XMultiPropertySet
virtual void SAL_CALL setPropertyValues( const css::uno::Sequence< OUString >& aPropertyNames, const css::uno::Sequence< css::uno::Any >& aValues ) override;
virtual css::uno::Sequence< css::uno::Any > SAL_CALL getPropertyValues( const css::uno::Sequence< OUString >& aPropertyNames ) override;
virtual void SAL_CALL addPropertiesChangeListener( const css::uno::Sequence< OUString >& aPropertyNames, const css::uno::Reference< css::beans::XPropertiesChangeListener >& xListener ) override;
virtual void SAL_CALL removePropertiesChangeListener( const css::uno::Reference< css::beans::XPropertiesChangeListener >& xListener ) override;
virtual void SAL_CALL firePropertiesChangeEvent( const css::uno::Sequence< OUString >& aPropertyNames, const css::uno::Reference< css::beans::XPropertiesChangeListener >& xListener ) override;
// XPropertyState
virtual css::beans::PropertyState SAL_CALL getPropertyState( const OUString& PropertyName ) override;
virtual css::uno::Sequence< css::beans::PropertyState > SAL_CALL getPropertyStates( const css::uno::Sequence< OUString >& aPropertyName ) override;
virtual void SAL_CALL setPropertyToDefault( const OUString& PropertyName ) override;
virtual css::uno::Any SAL_CALL getPropertyDefault( const OUString& aPropertyName ) override;
// XMultiPropertyStates
virtual void SAL_CALL setAllPropertiesToDefault() override;
virtual void SAL_CALL setPropertiesToDefault(
const css::uno::Sequence<
OUString >& aPropertyNames ) override;
virtual css::uno::Sequence< css::uno::Any >
SAL_CALL getPropertyDefaults(
const css::uno::Sequence<
OUString >& aPropertyNames ) override;
// XServiceInfo
virtual OUString SAL_CALL getImplementationName() override;
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames() override;
virtual sal_Bool SAL_CALL supportsService( const OUString& ServiceName ) override;
// XGluePointsSupplier
virtual css::uno::Reference< css::container::XIndexContainer > SAL_CALL getGluePoints( ) override;
// XChild
virtual css::uno::Reference< css::uno::XInterface > SAL_CALL getParent( ) override;
virtual void SAL_CALL setParent( const css::uno::Reference< css::uno::XInterface >& Parent ) override;
// XTypeProvider
virtual css::uno::Sequence< css::uno::Type > SAL_CALL getTypes( ) override;
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
// XActionLockable
virtual sal_Bool SAL_CALL isActionLocked( ) override;
virtual void SAL_CALL addActionLock( ) override;
virtual void SAL_CALL removeActionLock( ) override;
virtual void SAL_CALL setActionLocks( sal_Int16 nLock ) override;
virtual sal_Int16 SAL_CALL resetActionLocks( ) override;
private:
/** initializes SdrObj-dependent members. Only to be called when GetSdrObject() != NULL
*/
SVX_DLLPRIVATE void impl_initFromSdrObject();
/// CTOR-Impl
SVX_DLLPRIVATE void impl_construct();
std::mutex m_aMutex;
css::awt::Size maSize;
css::awt::Point maPosition;
OUString maShapeType;
OUString maShapeName;
/** these members are used to optimize XMultiProperty calls */
std::unique_ptr<SvxShapeImpl> mpImpl;
bool mbIsMultiPropertyCall;
css::uno::WeakReference< css::container::XIndexContainer > mxGluePoints;
const SvxItemPropertySet* mpPropSet;
SvxItemPropertySetUsrAnys maUrsAnys;
std::span<const SfxItemPropertyMapEntry> maPropMapEntries;
rtl::Reference< SdrObject > mxSdrObject;
/** used from the XActionLockable interface */
sal_uInt16 mnLockCount;
};
class SVXCORE_DLLPUBLIC SvxShapeText : public SvxShape, public SvxUnoTextBase
{
protected:
/** called from the XActionLockable interface methods on initial locking */
virtual void lock() override;
/** called from the XActionLockable interface methods on final unlock */
virtual void unlock() override;
protected:
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
virtual bool getPropertyStateImpl( const SfxItemPropertyMapEntry* pProperty, css::beans::PropertyState& rState ) override;
virtual bool setPropertyToDefaultImpl( const SfxItemPropertyMapEntry* pProperty ) override;
public:
SvxShapeText(SdrObject* pObj);
SvxShapeText(SdrObject* pObject, std::span<const SfxItemPropertyMapEntry> pPropertyMap, const SvxItemPropertySet* pPropertySet);
virtual ~SvxShapeText() noexcept override;
virtual void Create( SdrObject* pNewOpj, SvxDrawPage* pNewPage ) override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShape::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShape::release(); }
// XServiceInfo
virtual OUString SAL_CALL getImplementationName() override;
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames() override;
virtual sal_Bool SAL_CALL supportsService( const OUString& ServiceName ) override;
// css::text::XTextRange
virtual css::uno::Reference< css::text::XTextRange > SAL_CALL getStart() override;
virtual css::uno::Reference< css::text::XTextRange > SAL_CALL getEnd() override;
virtual OUString SAL_CALL getString() override;
virtual void SAL_CALL setString( const OUString& aString ) override;
// XUnoTunnel
virtual sal_Int64 SAL_CALL getSomething( const css::uno::Sequence< sal_Int8 >& aIdentifier ) override;
// XTypeProvider
virtual css::uno::Sequence< css::uno::Type > SAL_CALL getTypes( ) override;
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
};
class UNLESS_MERGELIBS(SAL_DLLPUBLIC_RTTI) SvxShapeRect final : public SvxShapeText
{
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) SvxShapeRect(SdrObject* pObj);
virtual ~SvxShapeRect() noexcept override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ OWeakAggObject::acquire(); }
virtual void SAL_CALL release() noexcept override
{ OWeakAggObject::release(); }
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames() override;
};
/// This only exists so I have a common base class for SvxShapeGroup and Svx3DSceneObject
class SVXCORE_DLLPUBLIC SvxShapeGroupAnyD : public SvxShape,
public css::drawing::XShapes
{
public:
SvxShapeGroupAnyD( SdrObject* pObject, std::span<const SfxItemPropertyMapEntry> pEntries, const SvxItemPropertySet* pPropertySet );
virtual ~SvxShapeGroupAnyD() noexcept override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShape::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShape::release(); }
virtual void addShape(SvxShape& rShape) = 0;
};
/***********************************************************************
* *
***********************************************************************/
class UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) SvxShapeGroup final : public SvxShapeGroupAnyD,
public css::drawing::XShapeGroup,
public css::drawing::XShapes2
{
private:
/// using a weak reference to prevent leaks via ref-counting cycles
unotools::WeakReference< SvxDrawPage> mxWeakPage;
void addUnoShape( const css::uno::Reference< css::drawing::XShape >& xShape, size_t nPos );
void addShape(SvxShape& rShape, size_t nPos);
public:
SvxShapeGroup(SdrObject* pObj,SvxDrawPage* pDrawPage);
virtual ~SvxShapeGroup() noexcept override;
virtual void Create( SdrObject* pNewOpj, SvxDrawPage* pNewPage ) override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShape::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShape::release(); }
// XShapes
virtual void SAL_CALL add( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
virtual void SAL_CALL remove( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
// XShapes2
virtual void SAL_CALL addTop( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
virtual void SAL_CALL addBottom( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
// XElementAccess
virtual css::uno::Type SAL_CALL getElementType() override;
virtual sal_Bool SAL_CALL hasElements() override;
// XIndexAccess
virtual sal_Int32 SAL_CALL getCount() override ;
virtual css::uno::Any SAL_CALL getByIndex( sal_Int32 Index ) override;
// XShapeDescriptor
virtual OUString SAL_CALL getShapeType() override;
// XShape
virtual css::awt::Point SAL_CALL getPosition() override;
virtual void SAL_CALL setPosition( const css::awt::Point& aPosition ) override;
virtual css::awt::Size SAL_CALL getSize() override;
virtual void SAL_CALL setSize( const css::awt::Size& aSize ) override;
// XShapeGroup
virtual void SAL_CALL enterGroup( ) override;
virtual void SAL_CALL leaveGroup( ) override;
// XTypeProvider
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
virtual void addShape(SvxShape& rShape) final override;
};
/***********************************************************************
* *
***********************************************************************/
class SvxShapeConnector final : public css::drawing::XConnectorShape,
public SvxShapeText
{
public:
SvxShapeConnector(SdrObject* pObj);
virtual ~SvxShapeConnector() noexcept override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShapeText::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShapeText::release(); }
// XShapeDescriptor
virtual OUString SAL_CALL getShapeType() override;
// XShape
virtual css::awt::Point SAL_CALL getPosition() override;
virtual void SAL_CALL setPosition( const css::awt::Point& aPosition ) override;
virtual css::awt::Size SAL_CALL getSize() override;
virtual void SAL_CALL setSize( const css::awt::Size& aSize ) override;
// XConnectorShape
virtual void SAL_CALL connectStart( const css::uno::Reference< css::drawing::XConnectableShape >& xShape, css::drawing::ConnectionType nPos ) override;
virtual void SAL_CALL connectEnd( const css::uno::Reference< css::drawing::XConnectableShape >& xShape, css::drawing::ConnectionType nPos ) override;
virtual void SAL_CALL disconnectBegin( const css::uno::Reference< css::drawing::XConnectableShape >& xShape ) override;
virtual void SAL_CALL disconnectEnd( const css::uno::Reference< css::drawing::XConnectableShape >& xShape ) override;
// XTypeProvider
virtual css::uno::Sequence< css::uno::Type > SAL_CALL getTypes( ) override;
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class UNLESS_MERGELIBS_MORE(SVXCORE_DLLPUBLIC) SvxShapeControl final : public css::drawing::XControlShape, public SvxShapeText
{
protected:
using SvxUnoTextRangeBase::setPropertyValue;
using SvxUnoTextRangeBase::getPropertyValue;
public:
SvxShapeControl(SdrObject* pObj);
virtual ~SvxShapeControl() noexcept override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShapeText::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShapeText::release(); }
// XPropertySet
virtual void SAL_CALL setPropertyValue( const OUString& aPropertyName, const css::uno::Any& aValue ) override;
virtual css::uno::Any SAL_CALL getPropertyValue( const OUString& PropertyName ) override;
// XPropertyState
virtual css::beans::PropertyState SAL_CALL getPropertyState( const OUString& PropertyName ) override;
virtual void SAL_CALL setPropertyToDefault( const OUString& PropertyName ) override;
virtual css::uno::Any SAL_CALL getPropertyDefault( const OUString& aPropertyName ) override;
// XShapeDescriptor
virtual OUString SAL_CALL getShapeType() override;
// XShape
virtual css::awt::Point SAL_CALL getPosition() override;
virtual void SAL_CALL setPosition( const css::awt::Point& aPosition ) override;
virtual css::awt::Size SAL_CALL getSize() override;
virtual void SAL_CALL setSize( const css::awt::Size& aSize ) override;
// XControlShape
virtual css::uno::Reference< css::awt::XControlModel > SAL_CALL getControl() override;
virtual void SAL_CALL setControl( const css::uno::Reference< css::awt::XControlModel >& xControl ) override;
// XTypeProvider
virtual css::uno::Sequence< css::uno::Type > SAL_CALL getTypes( ) override;
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class SvxShapeDimensioning final : public SvxShapeText
{
public:
SvxShapeDimensioning(SdrObject* pObj);
virtual ~SvxShapeDimensioning() noexcept override;
};
/***********************************************************************
* *
***********************************************************************/
class SvxShapeCircle final : public SvxShapeText
{
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) SvxShapeCircle(SdrObject* pObj);
virtual ~SvxShapeCircle() noexcept override;
};
/***********************************************************************
* *
***********************************************************************/
// #i118485# changed parent to SvxShapeText to allow Text handling over UNO API
class UNLESS_MERGELIBS_MORE(SVXCORE_DLLPUBLIC) SvxOle2Shape : public SvxShapeText
{
private:
OUString referer_;
protected:
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
void resetModifiedState();
SvGlobalName GetClassName_Impl(OUString& rHexCLSID);
public:
SvxOle2Shape(SdrObject* pObj, OUString referer);
SvxOle2Shape(SdrObject* pObject, OUString referer, std::span<const SfxItemPropertyMapEntry> pPropertyMap, const SvxItemPropertySet* pPropertySet);
virtual ~SvxOle2Shape() noexcept override;
bool createObject( const SvGlobalName &aClassName );
void createLink( const OUString& aLinkURL );
virtual OUString GetAndClearInitialFrameURL();
};
/***********************************************************************
* *
***********************************************************************/
class UNLESS_MERGELIBS(SAL_DLLPUBLIC_RTTI) SvxShapePolyPolygon final : public SvxShapeText
{
using SvxUnoTextRangeBase::setPropertyValue;
using SvxUnoTextRangeBase::getPropertyValue;
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
// local helper to detect PolygonKind from SdrObject::GetObjIdentifier()
css::drawing::PolygonKind GetPolygonKind() const;
public:
/// @throws css::lang::IllegalArgumentException
/// @throws css::beans::PropertyVetoException
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) SvxShapePolyPolygon( SdrObject* pObj );
virtual ~SvxShapePolyPolygon() noexcept override;
// Local support functions
/// @throws css::uno::RuntimeException
void SetPolygon(const basegfx::B2DPolyPolygon& rNew);
basegfx::B2DPolyPolygon GetPolygon() const noexcept;
};
/***********************************************************************
* *
***********************************************************************/
class SvxGraphicObject final : public SvxShapeText
{
using SvxUnoTextRangeBase::setPropertyValue;
using SvxUnoTextRangeBase::getPropertyValue;
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) SvxGraphicObject(SdrObject* pObj);
virtual ~SvxGraphicObject() noexcept override;
};
/***********************************************************************
* *
***********************************************************************/
class UNLESS_MERGELIBS(SAL_DLLPUBLIC_RTTI) Svx3DSceneObject final : public SvxShapeGroupAnyD
{
private:
rtl::Reference< SvxDrawPage > mxPage;
public:
using SvxShape::setPropertyValue;
using SvxShape::getPropertyValue;
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) Svx3DSceneObject(SdrObject* pObj, SvxDrawPage* pDrawPage);
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl(const OUString& rName, const SfxItemPropertyMapEntry* pProperty,
css::uno::Any& rValue ) override;
virtual ~Svx3DSceneObject() noexcept override;
virtual void Create( SdrObject* pNewOpj, SvxDrawPage* pNewPage ) override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShape::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShape::release(); }
// XShapes
virtual void SAL_CALL add( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
virtual void SAL_CALL remove( const css::uno::Reference< css::drawing::XShape >& xShape ) override;
// XElementAccess
virtual css::uno::Type SAL_CALL getElementType( ) override;
virtual sal_Bool SAL_CALL hasElements( ) override;
// XIndexAccess
virtual sal_Int32 SAL_CALL getCount( ) override ;
virtual css::uno::Any SAL_CALL getByIndex( sal_Int32 Index ) override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames() override;
// XTypeProvider
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
virtual void addShape(SvxShape& rShape) override final;
};
/***********************************************************************
* *
***********************************************************************/
class Svx3DCubeObject final : public SvxShape
{
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
public:
Svx3DCubeObject(SdrObject* pObj);
virtual ~Svx3DCubeObject() noexcept override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class Svx3DSphereObject final : public SvxShape
{
public:
Svx3DSphereObject(SdrObject* pObj);
private:
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
virtual ~Svx3DSphereObject() noexcept override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class Svx3DLatheObject final : public SvxShape
{
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) Svx3DLatheObject(SdrObject* pObj);
virtual ~Svx3DLatheObject() noexcept override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class Svx3DExtrudeObject final : public SvxShape
{
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) Svx3DExtrudeObject(SdrObject* pObj);
private:
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
virtual ~Svx3DExtrudeObject() noexcept override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class Svx3DPolygonObject final : public SvxShape
{
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
public:
UNLESS_MERGELIBS(SVXCORE_DLLPUBLIC) Svx3DPolygonObject(SdrObject* pObj);
virtual ~Svx3DPolygonObject() noexcept override;
// XServiceInfo
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames( ) override;
};
/***********************************************************************
* *
***********************************************************************/
class SVXCORE_DLLPUBLIC SvxCustomShape final : public SvxShapeText, public css::drawing::XEnhancedCustomShapeDefaulter
{
protected:
using SvxUnoTextRangeBase::setPropertyValue;
using SvxUnoTextRangeBase::getPropertyValue;
public:
SvxCustomShape(SdrObject* pObj);
// override these for special property handling in subcasses. Return true if property is handled
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
virtual ~SvxCustomShape() noexcept override;
// XInterface
virtual css::uno::Any SAL_CALL queryAggregation( const css::uno::Type & rType ) override;
virtual css::uno::Any SAL_CALL queryInterface( const css::uno::Type & rType ) override;
virtual void SAL_CALL acquire() noexcept override
{ SvxShapeText::acquire(); }
virtual void SAL_CALL release() noexcept override
{ SvxShapeText::release(); }
// XShape
virtual css::awt::Point SAL_CALL getPosition() override;
// XPropertySet
void SAL_CALL setPropertyValue( const OUString& aPropertyName, const css::uno::Any& aValue ) override;
// XTypeProvider
virtual css::uno::Sequence< sal_Int8 > SAL_CALL getImplementationId( ) override;
//XEnhancedCustomShapeDefaulter
virtual void SAL_CALL createCustomShapeDefaults( const OUString& rShapeType ) override;
};
/***********************************************************************
* *
***********************************************************************/
class SvxMediaShape final : public SvxShape
{
public:
SvxMediaShape(SdrObject* pObj, OUString referer);
virtual ~SvxMediaShape() noexcept override;
private:
// override these for special property handling in subcasses. Return true if property is handled
virtual bool setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue ) override;
virtual bool getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue ) override;
bool getPropertyStateImpl(const SfxItemPropertyMapEntry* pProperty,
css::beans::PropertyState& rState) override;
OUString referer_;
};
#endif
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */