office-gobmx/vcl/qt5/Qt5Graphics_Controls.cxx
Stephan Bergmann 206b5b2661 New loplugin:external
...warning about (for now only) functions and variables with external linkage
that likely don't need it.

The problems with moving entities into unnamed namespacs and breaking ADL
(as alluded to in comments in compilerplugins/clang/external.cxx) are
illustrated by the fact that while

  struct S1 { int f() { return 0; } };
  int f(S1 s) { return s.f(); }
  namespace N {
    struct S2: S1 { int f() { return 1; } };
    int f(S2 s) { return s.f(); }
  }
  int main() { return f(N::S2()); }

returns 1, both moving just the struct S2 into an nunnamed namespace,

  struct S1 { int f() { return 0; } };
  int f(S1 s) { return s.f(); }
  namespace N {
    namespace { struct S2: S1 { int f() { return 1; } }; }
    int f(S2 s) { return s.f(); }
  }
  int main() { return f(N::S2()); }

as well as moving just the function f overload into an unnamed namespace,

  struct S1 { int f() { return 0; } };
  int f(S1 s) { return s.f(); }
  namespace N {
    struct S2: S1 { int f() { return 1; } };
    namespace { int f(S2 s) { return s.f(); } }
  }
  int main() { return f(N::S2()); }

would each change the program to return 0 instead.

Change-Id: I4d09f7ac5e8f9bcd6e6bde4712608444b642265c
Reviewed-on: https://gerrit.libreoffice.org/60539
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2018-09-17 09:05:38 +02:00

993 lines
41 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <Qt5Graphics_Controls.hxx>
#include <QtGui/QPainter>
#include <QtWidgets/QApplication>
#include <QtWidgets/QPushButton>
#include <QtWidgets/QStyle>
#include <QtWidgets/QStyleOption>
#include <QtWidgets/QFrame>
#include <QtWidgets/QLabel>
#include <qt5/Qt5Tools.hxx>
#include <vcl/decoview.hxx>
/**
Conversion function between VCL ControlState together with
ImplControlValue and Qt state flags.
@param nControlState State of the widget (default, focused, ...) in Native Widget Framework.
@param aValue Value held by the widget (on, off, ...)
*/
static QStyle::State vclStateValue2StateFlag(ControlState nControlState,
const ImplControlValue& aValue)
{
QStyle::State nState
= ((nControlState & ControlState::ENABLED) ? QStyle::State_Enabled : QStyle::State_None)
| ((nControlState & ControlState::FOCUSED) ? QStyle::State_HasFocus : QStyle::State_None)
| ((nControlState & ControlState::PRESSED) ? QStyle::State_Sunken : QStyle::State_None)
| ((nControlState & ControlState::SELECTED) ? QStyle::State_Selected : QStyle::State_None)
| ((nControlState & ControlState::ROLLOVER) ? QStyle::State_MouseOver
: QStyle::State_None);
switch (aValue.getTristateVal())
{
case ButtonValue::On:
nState |= QStyle::State_On;
break;
case ButtonValue::Off:
nState |= QStyle::State_Off;
break;
case ButtonValue::Mixed:
nState |= QStyle::State_NoChange;
break;
default:
break;
}
return nState;
}
Qt5Graphics_Controls::Qt5Graphics_Controls() { initStyles(); }
bool Qt5Graphics_Controls::IsNativeControlSupported(ControlType type, ControlPart part)
{
switch (type)
{
case ControlType::Tooltip:
case ControlType::Progress:
case ControlType::ListNode:
return (part == ControlPart::Entire);
case ControlType::Radiobutton:
case ControlType::Checkbox:
case ControlType::Pushbutton:
return (part == ControlPart::Entire) || (part == ControlPart::Focus);
case ControlType::ListHeader:
return (part == ControlPart::Button);
case ControlType::Menubar:
case ControlType::MenuPopup:
case ControlType::Editbox:
case ControlType::MultilineEditbox:
case ControlType::Combobox:
case ControlType::Toolbar:
case ControlType::Frame:
case ControlType::Scrollbar:
case ControlType::WindowBackground:
case ControlType::Fixedline:
return true;
case ControlType::Listbox:
return (part == ControlPart::Entire || part == ControlPart::HasBackgroundTexture);
case ControlType::Spinbox:
return (part == ControlPart::Entire || part == ControlPart::HasBackgroundTexture);
case ControlType::Slider:
return (part == ControlPart::TrackHorzArea || part == ControlPart::TrackVertArea);
default:
break;
}
return false;
}
/// helper drawing methods
namespace
{
void draw(QStyle::ControlElement element, QStyleOption* option, QImage* image,
QStyle::State const& state, QRect rect = QRect())
{
option->state |= state;
option->rect = !rect.isNull() ? rect : image->rect();
QPainter painter(image);
QApplication::style()->drawControl(element, option, &painter);
}
void draw(QStyle::PrimitiveElement element, QStyleOption* option, QImage* image,
QStyle::State const& state, QRect rect = QRect())
{
option->state |= state;
option->rect = !rect.isNull() ? rect : image->rect();
QPainter painter(image);
QApplication::style()->drawPrimitive(element, option, &painter);
}
void draw(QStyle::ComplexControl element, QStyleOptionComplex* option, QImage* image,
QStyle::State const& state)
{
option->state |= state;
option->rect = image->rect();
QPainter painter(image);
QApplication::style()->drawComplexControl(element, option, &painter);
}
void lcl_drawFrame(QStyle::PrimitiveElement element, QImage* image, QStyle::State const& state,
QStyle::PixelMetric eLineMetric = QStyle::PM_DefaultFrameWidth)
{
QStyleOptionFrame option;
option.frameShape = QFrame::StyledPanel;
option.state = QStyle::State_Sunken;
option.lineWidth = QApplication::style()->pixelMetric(eLineMetric);
draw(element, &option, image, state);
}
}
bool Qt5Graphics_Controls::drawNativeControl(ControlType type, ControlPart part,
const tools::Rectangle& rControlRegion,
ControlState nControlState,
const ImplControlValue& value, const OUString&)
{
bool nativeSupport = IsNativeControlSupported(type, part);
if (!nativeSupport)
{
assert(!nativeSupport && "drawNativeControl called without native support!");
return false;
}
if (m_lastPopupRect.isValid()
&& (type != ControlType::MenuPopup || part != ControlPart::MenuItem))
m_lastPopupRect = QRect();
bool returnVal = true;
QRect widgetRect = toQRect(rControlRegion);
//if no image, or resized, make a new image
if (!m_image || m_image->size() != widgetRect.size())
{
m_image.reset(new QImage(widgetRect.width(), widgetRect.height(),
QImage::Format_ARGB32_Premultiplied));
}
// Default image color - just once
switch (type)
{
case ControlType::MenuPopup:
if (part == ControlPart::MenuItemCheckMark || part == ControlPart::MenuItemRadioMark)
{
// it is necessary to fill the background transparently first, as this
// is painted after menuitem highlight, otherwise there would be a grey area
m_image->fill(Qt::transparent);
break;
}
SAL_FALLTHROUGH; // QPalette::Window
case ControlType::Menubar:
case ControlType::WindowBackground:
m_image->fill(QApplication::palette().color(QPalette::Window).rgb());
break;
case ControlType::Tooltip:
m_image->fill(QApplication::palette().color(QPalette::ToolTipBase).rgb());
break;
case ControlType::Scrollbar:
if ((part == ControlPart::DrawBackgroundVert)
|| (part == ControlPart::DrawBackgroundHorz))
{
m_image->fill(QApplication::palette().color(QPalette::Window).rgb());
break;
}
SAL_FALLTHROUGH; // Qt::transparent
default:
m_image->fill(Qt::transparent);
break;
}
QRegion* localClipRegion = nullptr;
if (type == ControlType::Pushbutton)
{
if (part == ControlPart::Entire)
{
QStyleOptionButton option;
draw(QStyle::CE_PushButton, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (part == ControlPart::Focus)
{
QStyleOptionButton option;
option.state = QStyle::State_HasFocus;
option.rect = m_image->rect();
QPainter painter(m_image.get());
m_focusedButton->style()->drawControl(QStyle::CE_PushButton, &option, &painter,
m_focusedButton.get());
}
}
else if (type == ControlType::Menubar)
{
if (part == ControlPart::MenuItem)
{
QStyleOptionMenuItem option;
if ((nControlState & ControlState::ROLLOVER)
&& QApplication::style()->styleHint(QStyle::SH_MenuBar_MouseTracking))
option.state |= QStyle::State_Selected;
if (nControlState
& ControlState::SELECTED) // Passing State_Sunken is currently not documented.
option.state |= QStyle::State_Sunken; // But some kinds of QStyle interpret it.
draw(QStyle::CE_MenuBarItem, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (part == ControlPart::Entire)
{
QStyleOptionMenuItem option;
draw(QStyle::CE_MenuBarEmptyArea, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else
{
returnVal = false;
}
}
else if (type == ControlType::MenuPopup)
{
assert(part == ControlPart::MenuItem ? m_lastPopupRect.isValid()
: !m_lastPopupRect.isValid());
if (part == ControlPart::MenuItem)
{
QStyleOptionMenuItem option;
draw(QStyle::CE_MenuItem, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
// HACK: LO core first paints the entire popup and only then it paints menu items,
// but QMenu::paintEvent() paints popup frame after all items. That means highlighted
// items here would paint the highlight over the frame border. Since calls to ControlPart::MenuItem
// are always preceded by calls to ControlPart::Entire, just remember the size for the whole
// popup (otherwise not possible to get here) and draw the border afterwards.
QRect framerect(m_lastPopupRect.topLeft() - widgetRect.topLeft(),
widgetRect.size().expandedTo(m_lastPopupRect.size()));
QStyleOptionFrame frame;
draw(QStyle::PE_FrameMenu, &frame, m_image.get(),
vclStateValue2StateFlag(nControlState, value), framerect);
}
else if (part == ControlPart::Separator)
{
QStyleOptionMenuItem option;
option.menuItemType = QStyleOptionMenuItem::Separator;
// Painting the whole menu item area results in different background
// with at least Plastique style, so clip only to the separator itself
// (QSize( 2, 2 ) is hardcoded in Qt)
option.rect = m_image->rect();
QSize size = QApplication::style()->sizeFromContents(QStyle::CT_MenuItem, &option,
QSize(2, 2));
QRect rect = m_image->rect();
QPoint center = rect.center();
rect.setHeight(size.height());
rect.moveCenter(center);
// don't paint over popup frame border (like the hack above, but here it can be simpler)
int fw = QApplication::style()->pixelMetric(QStyle::PM_MenuPanelWidth);
localClipRegion
= new QRegion(rect.translated(widgetRect.topLeft()).adjusted(fw, 0, -fw, 0));
draw(QStyle::CE_MenuItem, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value), rect);
}
else if (part == ControlPart::MenuItemCheckMark || part == ControlPart::MenuItemRadioMark)
{
QStyleOptionMenuItem option;
option.checkType = (part == ControlPart::MenuItemCheckMark)
? QStyleOptionMenuItem::NonExclusive
: QStyleOptionMenuItem::Exclusive;
option.checked = bool(nControlState & ControlState::PRESSED);
// widgetRect is now the rectangle for the checkbox/radiobutton itself, but Qt
// paints the whole menu item, so translate position (and it'll be clipped);
// it is also necessary to fill the background transparently first, as this
// is painted after menuitem highlight, otherwise there would be a grey area
assert(value.getType() == ControlType::MenuPopup);
const MenupopupValue* menuVal = static_cast<const MenupopupValue*>(&value);
QRect menuItemRect(toQRect(menuVal->maItemRect));
QRect rect(menuItemRect.topLeft() - widgetRect.topLeft(),
widgetRect.size().expandedTo(menuItemRect.size()));
// checkboxes are always displayed next to images in menus, so are never centered
const int focus_size = QApplication::style()->pixelMetric(QStyle::PM_FocusFrameHMargin);
rect.moveTo(-focus_size, rect.y());
draw(QStyle::CE_MenuItem, &option, m_image.get(),
vclStateValue2StateFlag(nControlState & ~ControlState::PRESSED, value), rect);
}
else if (part == ControlPart::Entire)
{
QStyleOptionMenuItem option;
draw(QStyle::PE_PanelMenu, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
// Try hard to get any frame!
QStyleOptionFrame frame;
draw(QStyle::PE_FrameMenu, &frame, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
draw(QStyle::PE_FrameWindow, &frame, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
m_lastPopupRect = widgetRect;
}
else
returnVal = false;
}
else if ((type == ControlType::Toolbar) && (part == ControlPart::Button))
{
QStyleOptionToolButton option;
option.arrowType = Qt::NoArrow;
option.subControls = QStyle::SC_ToolButton;
option.state = vclStateValue2StateFlag(nControlState, value);
option.state |= QStyle::State_Raised | QStyle::State_Enabled | QStyle::State_AutoRaise;
draw(QStyle::CC_ToolButton, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if ((type == ControlType::Toolbar) && (part == ControlPart::Entire))
{
QStyleOptionToolBar option;
option.rect = QRect(0, 0, widgetRect.width(), widgetRect.height());
option.state = vclStateValue2StateFlag(nControlState, value);
draw(QStyle::CE_ToolBar, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if ((type == ControlType::Toolbar)
&& (part == ControlPart::ThumbVert || part == ControlPart::ThumbHorz))
{ // reduce paint area only to the handle area
const int handleExtend = QApplication::style()->pixelMetric(QStyle::PM_ToolBarHandleExtent);
QRect rect;
QStyleOption option;
if (part == ControlPart::ThumbVert)
{
rect = QRect(0, 0, handleExtend, widgetRect.height());
localClipRegion
= new QRegion(widgetRect.x(), widgetRect.y(), handleExtend, widgetRect.height());
option.state = QStyle::State_Horizontal;
}
else
{
rect = QRect(0, 0, widgetRect.width(), handleExtend);
localClipRegion
= new QRegion(widgetRect.x(), widgetRect.y(), widgetRect.width(), handleExtend);
}
draw(QStyle::PE_IndicatorToolBarHandle, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value), rect);
}
else if (type == ControlType::Editbox || type == ControlType::MultilineEditbox)
{
lcl_drawFrame(QStyle::PE_FrameLineEdit, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Combobox)
{
QStyleOptionComboBox option;
option.editable = true;
draw(QStyle::CC_ComboBox, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Listbox)
{
QStyleOptionComboBox option;
option.editable = false;
switch (part)
{
case ControlPart::ListboxWindow:
lcl_drawFrame(QStyle::PE_Frame, m_image.get(),
vclStateValue2StateFlag(nControlState, value),
QStyle::PM_ComboBoxFrameWidth);
break;
case ControlPart::SubEdit:
draw(QStyle::CE_ComboBoxLabel, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
break;
case ControlPart::Entire:
draw(QStyle::CC_ComboBox, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
break;
case ControlPart::ButtonDown:
option.subControls = QStyle::SC_ComboBoxArrow;
draw(QStyle::CC_ComboBox, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
break;
default:
returnVal = false;
break;
}
}
else if (type == ControlType::ListNode)
{
QStyleOption option;
option.state = QStyle::State_Item | QStyle::State_Children;
if (value.getTristateVal() == ButtonValue::On)
option.state |= QStyle::State_Open;
draw(QStyle::PE_IndicatorBranch, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::ListHeader)
{
QStyleOptionHeader option;
draw(QStyle::CE_HeaderSection, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Checkbox)
{
if (part == ControlPart::Entire)
{
QStyleOptionButton option;
// clear FOCUSED bit, focus is drawn separately
nControlState &= ~ControlState::FOCUSED;
draw(QStyle::CE_CheckBox, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (part == ControlPart::Focus)
{
QStyleOptionFocusRect option;
draw(QStyle::PE_FrameFocusRect, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
}
else if (type == ControlType::Scrollbar)
{
if ((part == ControlPart::DrawBackgroundVert) || (part == ControlPart::DrawBackgroundHorz))
{
QStyleOptionSlider option;
assert(value.getType() == ControlType::Scrollbar);
const ScrollbarValue* sbVal = static_cast<const ScrollbarValue*>(&value);
//if the scroll bar is active (aka not degenerate... allow for hover events)
if (sbVal->mnVisibleSize < sbVal->mnMax)
option.state = QStyle::State_MouseOver;
bool horizontal = (part == ControlPart::DrawBackgroundHorz); //horizontal or vertical
option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
if (horizontal)
option.state |= QStyle::State_Horizontal;
//setup parameters from the OO values
option.minimum = sbVal->mnMin;
option.maximum = sbVal->mnMax - sbVal->mnVisibleSize;
option.maximum = qMax(option.maximum, option.minimum); // bnc#619772
option.sliderValue = sbVal->mnCur;
option.sliderPosition = sbVal->mnCur;
option.pageStep = sbVal->mnVisibleSize;
if (part == ControlPart::DrawBackgroundHorz)
option.upsideDown = sbVal->maButton1Rect.Left() > sbVal->maButton2Rect.Left();
//setup the active control... always the slider
if (sbVal->mnThumbState & ControlState::ROLLOVER)
option.activeSubControls = QStyle::SC_ScrollBarSlider;
draw(QStyle::CC_ScrollBar, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else
{
returnVal = false;
}
}
else if (type == ControlType::Spinbox)
{
QStyleOptionSpinBox option;
option.frame = true;
// determine active control
if (value.getType() == ControlType::SpinButtons)
{
const SpinbuttonValue* pSpinVal = static_cast<const SpinbuttonValue*>(&value);
if (pSpinVal->mnUpperState & ControlState::PRESSED)
option.activeSubControls |= QStyle::SC_SpinBoxUp;
if (pSpinVal->mnLowerState & ControlState::PRESSED)
option.activeSubControls |= QStyle::SC_SpinBoxDown;
if (pSpinVal->mnUpperState & ControlState::ENABLED)
option.stepEnabled |= QAbstractSpinBox::StepUpEnabled;
if (pSpinVal->mnLowerState & ControlState::ENABLED)
option.stepEnabled |= QAbstractSpinBox::StepDownEnabled;
if (pSpinVal->mnUpperState & ControlState::ROLLOVER)
option.state = QStyle::State_MouseOver;
if (pSpinVal->mnLowerState & ControlState::ROLLOVER)
option.state = QStyle::State_MouseOver;
}
draw(QStyle::CC_SpinBox, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Radiobutton)
{
if (part == ControlPart::Entire)
{
QStyleOptionButton option;
// clear FOCUSED bit, focus is drawn separately
nControlState &= ~ControlState::FOCUSED;
draw(QStyle::CE_RadioButton, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (part == ControlPart::Focus)
{
QStyleOptionFocusRect option;
draw(QStyle::PE_FrameFocusRect, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
}
else if (type == ControlType::Tooltip)
{
QStyleOption option;
draw(QStyle::PE_PanelTipLabel, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Frame)
{
lcl_drawFrame(QStyle::PE_Frame, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
// draw just the border, see http://qa.openoffice.org/issues/show_bug.cgi?id=107945
int fw = QApplication::style()->pixelMetric(QStyle::PM_DefaultFrameWidth);
localClipRegion
= new QRegion(QRegion(widgetRect).subtracted(widgetRect.adjusted(fw, fw, -fw, -fw)));
}
else if (type == ControlType::WindowBackground)
{
// Nothing to do - see "Default image color" switch ^^
}
else if (type == ControlType::Fixedline)
{
QStyleOptionMenuItem option;
option.menuItemType = QStyleOptionMenuItem::Separator;
option.state |= QStyle::State_Item;
draw(QStyle::CE_MenuItem, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Slider
&& (part == ControlPart::TrackHorzArea || part == ControlPart::TrackVertArea))
{
assert(value.getType() == ControlType::Slider);
const SliderValue* slVal = static_cast<const SliderValue*>(&value);
QStyleOptionSlider option;
option.rect = QRect(0, 0, widgetRect.width(), widgetRect.height());
option.state = vclStateValue2StateFlag(nControlState, value);
option.maximum = slVal->mnMax;
option.minimum = slVal->mnMin;
option.sliderPosition = option.sliderValue = slVal->mnCur;
bool horizontal = (part == ControlPart::TrackHorzArea); //horizontal or vertical
option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
if (horizontal)
option.state |= QStyle::State_Horizontal;
draw(QStyle::CC_Slider, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else if (type == ControlType::Progress && part == ControlPart::Entire)
{
SAL_WNODEPRECATED_DECLARATIONS_PUSH
QStyleOptionProgressBarV2 option;
SAL_WNODEPRECATED_DECLARATIONS_POP
option.minimum = 0;
option.maximum = widgetRect.width();
option.progress = value.getNumericVal();
option.rect = QRect(0, 0, widgetRect.width(), widgetRect.height());
option.state = vclStateValue2StateFlag(nControlState, value);
draw(QStyle::CE_ProgressBar, &option, m_image.get(),
vclStateValue2StateFlag(nControlState, value));
}
else
{
returnVal = false;
}
delete localClipRegion;
return returnVal;
}
bool Qt5Graphics_Controls::getNativeControlRegion(ControlType type, ControlPart part,
const tools::Rectangle& controlRegion,
ControlState controlState,
const ImplControlValue& val, const OUString&,
tools::Rectangle& nativeBoundingRegion,
tools::Rectangle& nativeContentRegion)
{
bool retVal = false;
QRect boundingRect = toQRect(controlRegion);
QRect contentRect = boundingRect;
QStyleOptionComplex styleOption;
switch (type)
{
// Metrics of the push button
case ControlType::Pushbutton:
if (part == ControlPart::Entire)
{
styleOption.state = vclStateValue2StateFlag(controlState, val);
if (controlState & ControlState::DEFAULT)
{
int size = QApplication::style()->pixelMetric(QStyle::PM_ButtonDefaultIndicator,
&styleOption);
boundingRect.adjust(-size, -size, size, size);
retVal = true;
}
}
break;
case ControlType::Editbox:
case ControlType::MultilineEditbox:
{
QStyleOptionFrame fo;
fo.frameShape = QFrame::StyledPanel;
fo.state = QStyle::State_Sunken;
fo.lineWidth = QApplication::style()->pixelMetric(QStyle::PM_DefaultFrameWidth);
QSize aMinSize = QApplication::style()->sizeFromContents(QStyle::CT_LineEdit, &fo,
contentRect.size());
if (aMinSize.height() > boundingRect.height())
{
int nHeight = (aMinSize.height() - boundingRect.height()) / 2;
assert(0 == (aMinSize.height() - boundingRect.height()) % 2);
boundingRect.adjust(0, -nHeight, 0, nHeight);
}
if (aMinSize.width() > boundingRect.width())
{
int nWidth = (aMinSize.width() - boundingRect.width()) / 2;
assert(0 == (aMinSize.width() - boundingRect.width()) % 2);
boundingRect.adjust(-nWidth, 0, nWidth, 0);
}
retVal = true;
break;
}
case ControlType::Checkbox:
if (part == ControlPart::Entire)
{
styleOption.state = vclStateValue2StateFlag(controlState, val);
contentRect.setWidth(
QApplication::style()->pixelMetric(QStyle::PM_IndicatorWidth, &styleOption));
contentRect.setHeight(
QApplication::style()->pixelMetric(QStyle::PM_IndicatorHeight, &styleOption));
contentRect.adjust(0, 0,
2
* QApplication::style()->pixelMetric(
QStyle::PM_FocusFrameHMargin, &styleOption),
2
* QApplication::style()->pixelMetric(
QStyle::PM_FocusFrameVMargin, &styleOption));
boundingRect = contentRect;
retVal = true;
}
break;
case ControlType::Combobox:
case ControlType::Listbox:
{
QStyleOptionComboBox cbo;
cbo.rect = QRect(0, 0, contentRect.width(), contentRect.height());
cbo.state = vclStateValue2StateFlag(controlState, val);
switch (part)
{
case ControlPart::Entire:
{
// find out the minimum size that should be used
// assume contents is a text line
int nHeight = QApplication::fontMetrics().height();
QSize aContentSize(contentRect.width(), nHeight);
QSize aMinSize = QApplication::style()->sizeFromContents(QStyle::CT_ComboBox,
&cbo, aContentSize);
if (aMinSize.height() > contentRect.height())
contentRect.adjust(0, 0, 0, aMinSize.height() - contentRect.height());
boundingRect = contentRect;
retVal = true;
break;
}
case ControlPart::ButtonDown:
contentRect = QApplication::style()->subControlRect(QStyle::CC_ComboBox, &cbo,
QStyle::SC_ComboBoxArrow);
contentRect.translate(boundingRect.left(), boundingRect.top());
retVal = true;
break;
case ControlPart::SubEdit:
{
contentRect = QApplication::style()->subControlRect(
QStyle::CC_ComboBox, &cbo, QStyle::SC_ComboBoxEditField);
contentRect.translate(boundingRect.left(), boundingRect.top());
retVal = true;
break;
}
default:
break;
}
break;
}
case ControlType::Spinbox:
{
QStyleOptionSpinBox sbo;
sbo.frame = true;
sbo.rect = QRect(0, 0, contentRect.width(), contentRect.height());
sbo.state = vclStateValue2StateFlag(controlState, val);
switch (part)
{
case ControlPart::Entire:
{
int nHeight = QApplication::fontMetrics().height();
QSize aContentSize(contentRect.width(), nHeight);
QSize aMinSize = QApplication::style()->sizeFromContents(QStyle::CT_SpinBox,
&sbo, aContentSize);
if (aMinSize.height() > contentRect.height())
contentRect.adjust(0, 0, 0, aMinSize.height() - contentRect.height());
boundingRect = contentRect;
retVal = true;
break;
}
case ControlPart::ButtonUp:
contentRect = QApplication::style()->subControlRect(QStyle::CC_SpinBox, &sbo,
QStyle::SC_SpinBoxUp);
contentRect.translate(boundingRect.left(), boundingRect.top());
retVal = true;
boundingRect = QRect();
break;
case ControlPart::ButtonDown:
contentRect = QApplication::style()->subControlRect(QStyle::CC_SpinBox, &sbo,
QStyle::SC_SpinBoxDown);
retVal = true;
contentRect.translate(boundingRect.left(), boundingRect.top());
boundingRect = QRect();
break;
case ControlPart::SubEdit:
contentRect = QApplication::style()->subControlRect(
QStyle::CC_SpinBox, &sbo, QStyle::SC_SpinBoxEditField);
retVal = true;
contentRect.translate(boundingRect.left(), boundingRect.top());
break;
default:
break;
}
break;
}
case ControlType::MenuPopup:
{
int h, w;
switch (part)
{
case ControlPart::MenuItemCheckMark:
h = QApplication::style()->pixelMetric(QStyle::PM_IndicatorHeight);
w = QApplication::style()->pixelMetric(QStyle::PM_IndicatorWidth);
retVal = true;
break;
case ControlPart::MenuItemRadioMark:
h = QApplication::style()->pixelMetric(QStyle::PM_ExclusiveIndicatorHeight);
w = QApplication::style()->pixelMetric(QStyle::PM_ExclusiveIndicatorWidth);
retVal = true;
break;
default:
break;
}
if (retVal)
{
contentRect = QRect(0, 0, w, h);
boundingRect = contentRect;
}
break;
}
case ControlType::Frame:
{
if (part == ControlPart::Border)
{
auto nStyle = static_cast<DrawFrameFlags>(val.getNumericVal() & 0xFFF0);
if (nStyle & DrawFrameFlags::NoDraw)
{
int nFrameWidth
= QApplication::style()->pixelMetric(QStyle::PM_DefaultFrameWidth);
contentRect.adjust(nFrameWidth, nFrameWidth, -nFrameWidth, -nFrameWidth);
}
retVal = true;
}
break;
}
case ControlType::Radiobutton:
{
const int h = QApplication::style()->pixelMetric(QStyle::PM_ExclusiveIndicatorHeight);
const int w = QApplication::style()->pixelMetric(QStyle::PM_ExclusiveIndicatorWidth);
contentRect = QRect(boundingRect.left(), boundingRect.top(), w, h);
contentRect.adjust(
0, 0,
2 * QApplication::style()->pixelMetric(QStyle::PM_FocusFrameHMargin, &styleOption),
2 * QApplication::style()->pixelMetric(QStyle::PM_FocusFrameVMargin, &styleOption));
boundingRect = contentRect;
retVal = true;
break;
}
case ControlType::Slider:
{
const int w = QApplication::style()->pixelMetric(QStyle::PM_SliderLength);
if (part == ControlPart::ThumbHorz)
{
contentRect
= QRect(boundingRect.left(), boundingRect.top(), w, boundingRect.height());
boundingRect = contentRect;
retVal = true;
}
else if (part == ControlPart::ThumbVert)
{
contentRect
= QRect(boundingRect.left(), boundingRect.top(), boundingRect.width(), w);
boundingRect = contentRect;
retVal = true;
}
break;
}
case ControlType::Toolbar:
{
const int nWorH = QApplication::style()->pixelMetric(QStyle::PM_ToolBarHandleExtent);
if (part == ControlPart::ThumbHorz)
{
contentRect
= QRect(boundingRect.left(), boundingRect.top(), boundingRect.width(), nWorH);
boundingRect = contentRect;
retVal = true;
}
else if (part == ControlPart::ThumbVert)
{
contentRect
= QRect(boundingRect.left(), boundingRect.top(), nWorH, boundingRect.height());
boundingRect = contentRect;
retVal = true;
}
break;
}
case ControlType::Scrollbar:
{
// core can't handle 3-button scrollbars well, so we fix that in hitTestNativeControl(),
// for the rest also provide the track area (i.e. area not taken by buttons)
if (part == ControlPart::TrackVertArea || part == ControlPart::TrackHorzArea)
{
QStyleOptionSlider option;
bool horizontal = (part == ControlPart::TrackHorzArea); //horizontal or vertical
option.orientation = horizontal ? Qt::Horizontal : Qt::Vertical;
if (horizontal)
option.state |= QStyle::State_Horizontal;
// getNativeControlRegion usually gets ImplControlValue as 'val' (i.e. not the proper
// subclass), so use random sensible values (doesn't matter anyway, as the wanted
// geometry here depends only on button sizes)
option.maximum = 10;
option.minimum = 0;
option.sliderPosition = option.sliderValue = 4;
option.pageStep = 2;
// Adjust coordinates to make the widget appear to be at (0,0), i.e. make
// widget and screen coordinates the same. QStyle functions should use screen
// coordinates but at least QPlastiqueStyle::subControlRect() is buggy
// and sometimes uses widget coordinates.
QRect rect = contentRect;
rect.moveTo(0, 0);
option.rect = rect;
rect = QApplication::style()->subControlRect(QStyle::CC_ScrollBar, &option,
QStyle::SC_ScrollBarGroove);
rect.translate(contentRect.topLeft()); // reverse the workaround above
contentRect = boundingRect = rect;
retVal = true;
}
break;
}
default:
break;
}
if (retVal)
{
// Bounding region
Point aBPoint(boundingRect.x(), boundingRect.y());
Size aBSize(boundingRect.width(), boundingRect.height());
nativeBoundingRegion = tools::Rectangle(aBPoint, aBSize);
// vcl::Region of the content
Point aPoint(contentRect.x(), contentRect.y());
Size aSize(contentRect.width(), contentRect.height());
nativeContentRegion = tools::Rectangle(aPoint, aSize);
}
return retVal;
}
/** Test whether the position is in the native widget.
If the return value is true, bIsInside contains information whether
aPos was or was not inside the native widget specified by the
nType/nPart combination.
*/
bool Qt5Graphics_Controls::hitTestNativeControl(ControlType nType, ControlPart nPart,
const tools::Rectangle& rControlRegion,
const Point& rPos, bool& rIsInside)
{
if (nType == ControlType::Scrollbar)
{
if (nPart != ControlPart::ButtonUp && nPart != ControlPart::ButtonDown
&& nPart != ControlPart::ButtonLeft && nPart != ControlPart::ButtonRight)
{ // we adjust only for buttons (because some scrollbars have 3 buttons,
// and LO core doesn't handle such scrollbars well)
return false;
}
rIsInside = false;
bool bHorizontal = (nPart == ControlPart::ButtonLeft || nPart == ControlPart::ButtonRight);
QRect rect = toQRect(rControlRegion);
QPoint pos(rPos.X(), rPos.Y());
// Adjust coordinates to make the widget appear to be at (0,0), i.e. make
// widget and screen coordinates the same. QStyle functions should use screen
// coordinates but at least QPlastiqueStyle::subControlRect() is buggy
// and sometimes uses widget coordinates.
pos -= rect.topLeft();
rect.moveTo(0, 0);
QStyleOptionSlider options;
options.orientation = bHorizontal ? Qt::Horizontal : Qt::Vertical;
if (bHorizontal)
options.state |= QStyle::State_Horizontal;
options.rect = rect;
// some random sensible values, since we call this code only for scrollbar buttons,
// the slider position does not exactly matter
options.maximum = 10;
options.minimum = 0;
options.sliderPosition = options.sliderValue = 4;
options.pageStep = 2;
QStyle::SubControl control
= QApplication::style()->hitTestComplexControl(QStyle::CC_ScrollBar, &options, pos);
if (nPart == ControlPart::ButtonUp || nPart == ControlPart::ButtonLeft)
rIsInside = (control == QStyle::SC_ScrollBarSubLine);
else // DOWN, RIGHT
rIsInside = (control == QStyle::SC_ScrollBarAddLine);
return true;
}
return false;
}
void Qt5Graphics_Controls::initStyles()
{
// button focus
m_focusedButton.reset(new QPushButton());
QString aHighlightColor = QApplication::palette().color(QPalette::Highlight).name();
QString focusStyleSheet("background-color: rgb(0,0,0,0%); border: 1px; border-radius: 2px; "
"border-color: %1; border-style:solid;");
focusStyleSheet.replace("%1", aHighlightColor);
m_focusedButton->setStyleSheet(focusStyleSheet);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */