office-gobmx/slideshow/source/engine/slideshowimpl.cxx
Marco Cecchetti 1f0fd06bc0 sd: slideshow render interface and implementation
Interface and implementation to expose the ability to render
the slide's layers to a bitmap.

Change-Id: I3da48585e498354592e163d84bd29659b233c255
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/170214
Tested-by: Jenkins
Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
2024-07-10 08:05:56 +02:00

2662 lines
93 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <config_features.h>
#include <comphelper/diagnose_ex.hxx>
#include <cppuhelper/basemutex.hxx>
#include <cppuhelper/compbase.hxx>
#include <cppuhelper/interfacecontainer.h>
#include <cppuhelper/supportsservice.hxx>
#include <comphelper/interfacecontainer3.hxx>
#include <comphelper/scopeguard.hxx>
#include <comphelper/storagehelper.hxx>
#include <cppcanvas/polypolygon.hxx>
#include <osl/thread.hxx>
#include <tools/debug.hxx>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/utils/canvastools.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include <sal/log.hxx>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/util/XUpdatable.hpp>
#include <com/sun/star/awt/SystemPointer.hpp>
#include <com/sun/star/presentation/XSlideShow.hpp>
#include <com/sun/star/presentation/XSlideShowNavigationListener.hpp>
#include <com/sun/star/lang/NoSupportException.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/lang/XServiceInfo.hpp>
#include <com/sun/star/drawing/LineCap.hpp>
#include <com/sun/star/drawing/PointSequenceSequence.hpp>
#include <com/sun/star/drawing/PointSequence.hpp>
#include <com/sun/star/drawing/XLayer.hpp>
#include <com/sun/star/drawing/XLayerSupplier.hpp>
#include <com/sun/star/drawing/XLayerManager.hpp>
#include <com/sun/star/container/XNameAccess.hpp>
#include <com/sun/star/document/XStorageBasedDocument.hpp>
#include <com/sun/star/uno/Reference.hxx>
#include <com/sun/star/loader/CannotActivateFactoryException.hpp>
#include <unoviewcontainer.hxx>
#include <transitionfactory.hxx>
#include <eventmultiplexer.hxx>
#include <usereventqueue.hxx>
#include <eventqueue.hxx>
#include <cursormanager.hxx>
#include <mediafilemanager.hxx>
#include <slideshowcontext.hxx>
#include <activitiesqueue.hxx>
#include <activitiesfactory.hxx>
#include <interruptabledelayevent.hxx>
#include <slide.hxx>
#include <shapemaps.hxx>
#include <slideview.hxx>
#include <tools.hxx>
#include <unoview.hxx>
#include <vcl/virdev.hxx>
#include "rehearsetimingsactivity.hxx"
#include "waitsymbol.hxx"
#include "effectrewinder.hxx"
#include <framerate.hxx>
#include "pointersymbol.hxx"
#include "slideoverlaybutton.hxx"
#include <map>
#include <thread>
#include <utility>
#include <vector>
#include <algorithm>
using namespace com::sun::star;
using namespace ::slideshow::internal;
namespace box2d::utils { class box2DWorld;
typedef ::std::shared_ptr< box2DWorld > Box2DWorldSharedPtr; }
namespace {
/** During animations the update() method tells its caller to call it as
soon as possible. This gives us more time to render the next frame and
still maintain a steady frame rate. This class is responsible for
synchronizing the display of new frames and thus keeping the frame rate
steady.
*/
class FrameSynchronization
{
public:
/** Create new object with a predefined duration between two frames.
@param nFrameDuration
The preferred duration between the display of two frames in
seconds.
*/
explicit FrameSynchronization (const double nFrameDuration);
/** Set the current time as the time at which the current frame is
displayed. From this the target time of the next frame is derived.
*/
void MarkCurrentFrame();
/** When there is time left until the next frame is due then wait.
Otherwise return without delay.
*/
void Synchronize();
/** Activate frame synchronization when an animation is active and
frames are to be displayed in a steady rate. While active
Synchronize() will wait until the frame duration time has passed.
*/
void Activate();
/** Deactivate frame synchronization when no animation is active and the
time between frames depends on user actions and other external
sources. While deactivated Synchronize() will return without delay.
*/
void Deactivate();
private:
/** The timer that is used for synchronization is independent from the
one used by SlideShowImpl: it is not paused or modified by
animations.
*/
canvas::tools::ElapsedTime maTimer;
/** Time between the display of frames. Enforced only when mbIsActive
is <TRUE/>.
*/
const double mnFrameDuration;
/** Time (of maTimer) when the next frame shall be displayed.
Synchronize() will wait until this time.
*/
double mnNextFrameTargetTime;
/** Synchronize() will wait only when this flag is <TRUE/>. Otherwise
it returns immediately.
*/
bool mbIsActive;
};
/******************************************************************************
SlideShowImpl
This class encapsulates the slideshow presentation viewer.
With an instance of this class, it is possible to statically
and dynamically show a presentation, as defined by the
constructor-provided draw model (represented by a sequence
of css::drawing::XDrawPage objects).
It is possible to show the presentation on multiple views
simultaneously (e.g. for a multi-monitor setup). Since this
class also relies on user interaction, the corresponding
XSlideShowView interface provides means to register some UI
event listeners (mostly borrowed from awt::XWindow interface).
Since currently (mid 2004), OOo isn't very well suited to
multi-threaded rendering, this class relies on <em>very
frequent</em> external update() calls, which will render the
next frame of animations. This works as follows: after the
displaySlide() has been successfully called (which setup and
starts an actual slide show), the update() method must be
called until it returns false.
Effectively, this puts the burden of providing
concurrency to the clients of this class, which, as noted
above, is currently unavoidable with the current state of
affairs (I've actually tried threading here, but failed
miserably when using the VCL canvas as the render backend -
deadlocked).
******************************************************************************/
typedef cppu::WeakComponentImplHelper<css::lang::XServiceInfo, presentation::XSlideShow> SlideShowImplBase;
typedef ::std::vector< ::cppcanvas::PolyPolygonSharedPtr> PolyPolygonVector;
/// Maps XDrawPage for annotations persistence
typedef ::std::map< css::uno::Reference<
css::drawing::XDrawPage>,
PolyPolygonVector> PolygonMap;
class SlideShowImpl : private cppu::BaseMutex,
public CursorManager,
public MediaFileManager,
public SlideShowImplBase
{
public:
explicit SlideShowImpl(
uno::Reference<uno::XComponentContext> xContext );
/** Notify that the transition phase of the current slide
has ended.
The life of a slide has three phases: the transition
phase, when the previous slide vanishes, and the
current slide becomes visible, the shape animation
phase, when shape effects are running, and the phase
after the last shape animation has ended, but before
the next slide transition starts.
This method notifies the end of the first phase.
@param bPaintSlide
When true, Slide::show() is passed a true as well, denoting
explicit paint of slide content. Pass false here, if e.g. a
slide transition has already rendered the initial slide image.
*/
void notifySlideTransitionEnded( bool bPaintSlide );
/** Notify that the shape animation phase of the current slide
has ended.
The life of a slide has three phases: the transition
phase, when the previous slide vanishes, and the
current slide becomes visible, the shape animation
phase, when shape effects are running, and the phase
after the last shape animation has ended, but before
the next slide transition starts.
This method notifies the end of the second phase.
*/
void notifySlideAnimationsEnded();
/** Notify that the slide has ended.
The life of a slide has three phases: the transition
phase, when the previous slide vanishes, and the
current slide becomes visible, the shape animation
phase, when shape effects are running, and the phase
after the last shape animation has ended, but before
the next slide transition starts.
This method notifies the end of the third phase.
*/
void notifySlideEnded (const bool bReverse);
/** Notification from eventmultiplexer that a hyperlink
has been clicked.
*/
bool notifyHyperLinkClicked( OUString const& hyperLink );
/** Notification from eventmultiplexer that an animation event has occurred.
This will be forwarded to all registered XSlideShowListener
*/
bool handleAnimationEvent( const AnimationNodeSharedPtr& rNode );
/** Obtain a MediaTempFile for the specified url. */
virtual std::shared_ptr<avmedia::MediaTempFile> getMediaTempFile(const OUString& aUrl) override;
private:
// XServiceInfo
virtual OUString SAL_CALL getImplementationName() override;
virtual sal_Bool SAL_CALL supportsService(const OUString& ServiceName) override;
virtual css::uno::Sequence< OUString > SAL_CALL getSupportedServiceNames () override;
// XSlideShow:
virtual sal_Bool SAL_CALL nextEffect() override;
virtual sal_Bool SAL_CALL previousEffect() override;
virtual sal_Bool SAL_CALL startShapeActivity(
uno::Reference<drawing::XShape> const& xShape ) override;
virtual sal_Bool SAL_CALL stopShapeActivity(
uno::Reference<drawing::XShape> const& xShape ) override;
virtual sal_Bool SAL_CALL pause( sal_Bool bPauseShow ) override;
virtual uno::Reference<drawing::XDrawPage> SAL_CALL getCurrentSlide() override;
virtual void SAL_CALL displaySlide(
uno::Reference<drawing::XDrawPage> const& xSlide,
uno::Reference<drawing::XDrawPagesSupplier> const& xDrawPages,
uno::Reference<animations::XAnimationNode> const& xRootNode,
uno::Sequence<beans::PropertyValue> const& rProperties ) override;
virtual void SAL_CALL registerUserPaintPolygons( const css::uno::Reference< css::lang::XMultiServiceFactory >& xDocFactory ) override;
virtual sal_Bool SAL_CALL setProperty(
beans::PropertyValue const& rProperty ) override;
virtual sal_Bool SAL_CALL addView(
uno::Reference<presentation::XSlideShowView> const& xView ) override;
virtual sal_Bool SAL_CALL removeView(
uno::Reference<presentation::XSlideShowView> const& xView ) override;
virtual sal_Bool SAL_CALL update( double & nNextTimeout ) override;
virtual void SAL_CALL addSlideShowListener(
uno::Reference<presentation::XSlideShowListener> const& xListener ) override;
virtual void SAL_CALL removeSlideShowListener(
uno::Reference<presentation::XSlideShowListener> const& xListener ) override;
virtual void SAL_CALL addShapeEventListener(
uno::Reference<presentation::XShapeEventListener> const& xListener,
uno::Reference<drawing::XShape> const& xShape ) override;
virtual void SAL_CALL removeShapeEventListener(
uno::Reference<presentation::XShapeEventListener> const& xListener,
uno::Reference<drawing::XShape> const& xShape ) override;
virtual void SAL_CALL setShapeCursor(
uno::Reference<drawing::XShape> const& xShape, sal_Int16 nPointerShape ) override;
virtual sal_Bool SAL_CALL createLOKSlideRenderer(
sal_Int32& nViewWidth, sal_Int32& nViewHeight,
sal_Bool bRenderMasterPage, sal_Bool bRenderBackground,
const uno::Reference<drawing::XDrawPage>& xSlide,
const uno::Reference<drawing::XDrawPagesSupplier>& xDrawPages,
const uno::Reference<animations::XAnimationNode>& xRootNode) override;
virtual sal_Bool SAL_CALL renderNextLOKSlideLayer(
sal_Int64 nBufferPointer, sal_Bool& bIsBitmapLayer, OUString& rJsonMsg) override;
// CursorManager
virtual bool requestCursor( sal_Int16 nCursorShape ) override;
virtual void resetCursor() override;
/** This is somewhat similar to displaySlide when called for the current
slide. It has been simplified to take advantage of that no slide
change takes place. Furthermore it does not show the slide
transition.
*/
void redisplayCurrentSlide();
protected:
// WeakComponentImplHelperBase
virtual void SAL_CALL disposing() override;
bool isDisposed() const
{
return (rBHelper.bDisposed || rBHelper.bInDispose);
}
private:
struct SeparateListenerImpl; friend struct SeparateListenerImpl;
class PrefetchPropertiesFunc; friend class PrefetchPropertiesFunc;
/// Stop currently running show.
void stopShow();
///Find a polygons vector in maPolygons (map)
PolygonMap::iterator findPolygons( uno::Reference<drawing::XDrawPage> const& xDrawPage);
/// Creates a new slide.
SlideSharedPtr makeSlide(
uno::Reference<drawing::XDrawPage> const& xDrawPage,
uno::Reference<drawing::XDrawPagesSupplier> const& xDrawPages,
uno::Reference<animations::XAnimationNode> const& xRootNode );
/// Checks whether the given slide/animation node matches mpPrefetchSlide
static bool matches(
SlideSharedPtr const& pSlide,
uno::Reference<drawing::XDrawPage> const& xSlide,
uno::Reference<animations::XAnimationNode> const& xNode )
{
if (pSlide)
return (pSlide->getXDrawPage() == xSlide &&
pSlide->getXAnimationNode() == xNode);
else
return (!xSlide.is() && !xNode.is());
}
/// Resets the current slide transition sound object with a new one:
SoundPlayerSharedPtr resetSlideTransitionSound(
uno::Any const& url, bool bLoopSound );
/// stops the current slide transition sound
void stopSlideTransitionSound();
/** Prepare a slide transition
This method registers all necessary events and
activities for a slide transition.
@return the slide change activity, or NULL for no transition effect
*/
ActivitySharedPtr createSlideTransition(
const uno::Reference< drawing::XDrawPage >& xDrawPage,
const SlideSharedPtr& rLeavingSlide,
const SlideSharedPtr& rEnteringSlide,
const EventSharedPtr& rTransitionEndEvent );
/** Request/release the wait symbol. The wait symbol is displayed when
there are more requests then releases. Locking the wait symbol
helps to avoid intermediate repaints.
Do not call this method directly. Use WaitSymbolLock instead.
*/
void requestWaitSymbol();
void releaseWaitSymbol();
class WaitSymbolLock {public:
explicit WaitSymbolLock(SlideShowImpl& rSlideShowImpl) : mrSlideShowImpl(rSlideShowImpl)
{ mrSlideShowImpl.requestWaitSymbol(); }
~WaitSymbolLock()
{ mrSlideShowImpl.releaseWaitSymbol(); }
private: SlideShowImpl& mrSlideShowImpl;
};
/// Filter requested cursor shape against hard slideshow cursors (wait, etc.)
sal_Int16 calcActiveCursor( sal_Int16 nCursorShape ) const;
/** This method is called asynchronously to finish the rewinding of an
effect to the previous slide that was initiated earlier.
*/
void rewindEffectToPreviousSlide();
/// all registered views
UnoViewContainer maViewContainer;
/// all registered slide show listeners
comphelper::OInterfaceContainerHelper3<presentation::XSlideShowListener> maListenerContainer;
/// map of vectors, containing all registered listeners for a shape
ShapeEventListenerMap maShapeEventListeners;
/// map of sal_Int16 values, specifying the mouse cursor for every shape
ShapeCursorMap maShapeCursors;
//map of vector of Polygons, containing polygons drawn on each slide.
PolygonMap maPolygons;
std::optional<RGBColor> maUserPaintColor;
double maUserPaintStrokeWidth;
//changed for the eraser project
std::optional<bool> maEraseAllInk;
std::optional<sal_Int32> maEraseInk;
//end changed
std::shared_ptr<canvas::tools::ElapsedTime> mpPresTimer;
ScreenUpdater maScreenUpdater;
EventQueue maEventQueue;
EventMultiplexer maEventMultiplexer;
ActivitiesQueue maActivitiesQueue;
UserEventQueue maUserEventQueue;
SubsettableShapeManagerSharedPtr mpDummyPtr;
box2d::utils::Box2DWorldSharedPtr mpBox2DDummyPtr;
std::shared_ptr<SeparateListenerImpl> mpListener;
std::shared_ptr<RehearseTimingsActivity> mpRehearseTimingsActivity;
std::shared_ptr<WaitSymbol> mpWaitSymbol;
// navigation buttons
std::shared_ptr<SlideOverlayButton> mpNavigationPrev;
std::shared_ptr<SlideOverlayButton> mpNavigationMenu;
std::shared_ptr<SlideOverlayButton> mpNavigationNext;
std::shared_ptr<PointerSymbol> mpPointerSymbol;
/// the current slide transition sound object:
SoundPlayerSharedPtr mpCurrentSlideTransitionSound;
uno::Reference<uno::XComponentContext> mxComponentContext;
uno::Reference<
presentation::XTransitionFactory> mxOptionalTransitionFactory;
/// the previously running slide
SlideSharedPtr mpPreviousSlide;
/// the currently running slide
SlideSharedPtr mpCurrentSlide;
/// the already prefetched slide: best candidate for upcoming slide
SlideSharedPtr mpPrefetchSlide;
/// slide to be prefetched: best candidate for upcoming slide
uno::Reference<drawing::XDrawPage> mxPrefetchSlide;
/// save the XDrawPagesSupplier to retrieve polygons
uno::Reference<drawing::XDrawPagesSupplier> mxDrawPagesSupplier;
/// Used by MediaFileManager, for media files with package url.
uno::Reference<document::XStorageBasedDocument> mxSBD;
/// slide animation to be prefetched:
uno::Reference<animations::XAnimationNode> mxPrefetchAnimationNode;
sal_Int16 mnCurrentCursor;
sal_Int32 mnWaitSymbolRequestCount;
bool mbAutomaticAdvancementMode;
bool mbImageAnimationsAllowed;
bool mbNoSlideTransitions;
bool mbMouseVisible;
bool mbForceManualAdvance;
bool mbShowPaused;
bool mbSlideShowIdle;
bool mbDisableAnimationZOrder;
bool mbMovingForward;
EffectRewinder maEffectRewinder;
FrameSynchronization maFrameSynchronization;
};
/** Separate event listener for animation, view and hyperlink events.
This handler is registered for slide animation end, view and
hyperlink events at the global EventMultiplexer, and forwards
notifications to the SlideShowImpl
*/
struct SlideShowImpl::SeparateListenerImpl : public EventHandler,
public ViewRepaintHandler,
public HyperlinkHandler,
public AnimationEventHandler
{
SlideShowImpl& mrShow;
ScreenUpdater& mrScreenUpdater;
EventQueue& mrEventQueue;
SeparateListenerImpl( SlideShowImpl& rShow,
ScreenUpdater& rScreenUpdater,
EventQueue& rEventQueue ) :
mrShow( rShow ),
mrScreenUpdater( rScreenUpdater ),
mrEventQueue( rEventQueue )
{}
SeparateListenerImpl( const SeparateListenerImpl& ) = delete;
SeparateListenerImpl& operator=( const SeparateListenerImpl& ) = delete;
// EventHandler
virtual bool handleEvent() override
{
// DON't call notifySlideAnimationsEnded()
// directly, but queue an event. handleEvent()
// might be called from e.g.
// showNext(), and notifySlideAnimationsEnded() must not be called
// in recursion. Note that the event is scheduled for the next
// frame so that its expensive execution does not come in between
// sprite hiding and shape redraw (at the end of the animation of a
// shape), which would cause a flicker.
mrEventQueue.addEventForNextRound(
makeEvent( [this] () { this->mrShow.notifySlideAnimationsEnded(); },
u"SlideShowImpl::notifySlideAnimationsEnded"_ustr));
return true;
}
// ViewRepaintHandler
virtual void viewClobbered( const UnoViewSharedPtr& rView ) override
{
// given view needs repaint, request update
mrScreenUpdater.notifyUpdate(rView, true);
}
// HyperlinkHandler
virtual bool handleHyperlink( OUString const& rLink ) override
{
return mrShow.notifyHyperLinkClicked(rLink);
}
// AnimationEventHandler
virtual bool handleAnimationEvent( const AnimationNodeSharedPtr& rNode ) override
{
return mrShow.handleAnimationEvent(rNode);
}
};
SlideShowImpl::SlideShowImpl(
uno::Reference<uno::XComponentContext> xContext )
: SlideShowImplBase(m_aMutex),
maViewContainer(),
maListenerContainer( m_aMutex ),
maShapeEventListeners(),
maShapeCursors(),
maUserPaintColor(),
maUserPaintStrokeWidth(4.0),
mpPresTimer( std::make_shared<canvas::tools::ElapsedTime>() ),
maScreenUpdater(maViewContainer),
maEventQueue( mpPresTimer ),
maEventMultiplexer( maEventQueue,
maViewContainer ),
maActivitiesQueue( mpPresTimer ),
maUserEventQueue( maEventMultiplexer,
maEventQueue,
*this ),
mpDummyPtr(),
mpBox2DDummyPtr(),
mpListener(),
mpRehearseTimingsActivity(),
mpWaitSymbol(),
mpPointerSymbol(),
mpCurrentSlideTransitionSound(),
mxComponentContext(std::move( xContext )),
mxOptionalTransitionFactory(),
mpCurrentSlide(),
mpPrefetchSlide(),
mxPrefetchSlide(),
mxDrawPagesSupplier(),
mxSBD(),
mxPrefetchAnimationNode(),
mnCurrentCursor(awt::SystemPointer::ARROW),
mnWaitSymbolRequestCount(0),
mbAutomaticAdvancementMode(false),
mbImageAnimationsAllowed( true ),
mbNoSlideTransitions( false ),
mbMouseVisible( true ),
mbForceManualAdvance( false ),
mbShowPaused( false ),
mbSlideShowIdle( true ),
mbDisableAnimationZOrder( false ),
mbMovingForward( true ),
maEffectRewinder(maEventMultiplexer, maEventQueue, maUserEventQueue),
maFrameSynchronization(1.0 / FrameRate::PreferredFramesPerSecond)
{
// keep care not constructing any UNO references to this inside ctor,
// shift that code to create()!
uno::Reference<lang::XMultiComponentFactory> xFactory(
mxComponentContext->getServiceManager() );
if( xFactory.is() )
{
try
{
// #i82460# try to retrieve special transition factory
mxOptionalTransitionFactory.set(
xFactory->createInstanceWithContext(
u"com.sun.star.presentation.TransitionFactory"_ustr,
mxComponentContext ),
uno::UNO_QUERY );
}
catch (loader::CannotActivateFactoryException const&)
{
}
}
mpListener = std::make_shared<SeparateListenerImpl>(
*this,
maScreenUpdater,
maEventQueue );
maEventMultiplexer.addSlideAnimationsEndHandler( mpListener );
maEventMultiplexer.addViewRepaintHandler( mpListener );
maEventMultiplexer.addHyperlinkHandler( mpListener, 0.0 );
maEventMultiplexer.addAnimationStartHandler( mpListener );
maEventMultiplexer.addAnimationEndHandler( mpListener );
}
// we are about to be disposed (someone call dispose() on us)
void SlideShowImpl::disposing()
{
osl::MutexGuard const guard( m_aMutex );
maEffectRewinder.dispose();
// stop slide transition sound, if any:
stopSlideTransitionSound();
mxComponentContext.clear();
if( mpCurrentSlideTransitionSound )
{
mpCurrentSlideTransitionSound->dispose();
mpCurrentSlideTransitionSound.reset();
}
mpWaitSymbol.reset();
mpPointerSymbol.reset();
if( mpRehearseTimingsActivity )
{
mpRehearseTimingsActivity->dispose();
mpRehearseTimingsActivity.reset();
}
if( mpListener )
{
maEventMultiplexer.removeSlideAnimationsEndHandler(mpListener);
maEventMultiplexer.removeViewRepaintHandler(mpListener);
maEventMultiplexer.removeHyperlinkHandler(mpListener);
maEventMultiplexer.removeAnimationStartHandler( mpListener );
maEventMultiplexer.removeAnimationEndHandler( mpListener );
mpListener.reset();
}
maUserEventQueue.clear();
maActivitiesQueue.clear();
maEventMultiplexer.clear();
maEventQueue.clear();
mpPresTimer.reset();
maShapeCursors.clear();
maShapeEventListeners.clear();
// send all listeners a disposing() that we are going down:
maListenerContainer.disposeAndClear(
lang::EventObject( getXWeak() ) );
maViewContainer.dispose();
// release slides:
mxPrefetchAnimationNode.clear();
mxPrefetchSlide.clear();
mpPrefetchSlide.reset();
mpCurrentSlide.reset();
mpPreviousSlide.reset();
}
uno::Sequence< OUString > SAL_CALL SlideShowImpl::getSupportedServiceNames()
{
return { u"com.sun.star.presentation.SlideShow"_ustr };
}
OUString SAL_CALL SlideShowImpl::getImplementationName()
{
return u"com.sun.star.comp.presentation.SlideShow"_ustr;
}
sal_Bool SAL_CALL SlideShowImpl::supportsService(const OUString& aServiceName)
{
return cppu::supportsService(this, aServiceName);
}
/// stops the current slide transition sound
void SlideShowImpl::stopSlideTransitionSound()
{
if (mpCurrentSlideTransitionSound)
{
mpCurrentSlideTransitionSound->stopPlayback();
mpCurrentSlideTransitionSound->dispose();
mpCurrentSlideTransitionSound.reset();
}
}
SoundPlayerSharedPtr SlideShowImpl::resetSlideTransitionSound( const uno::Any& rSound, bool bLoopSound )
{
bool bStopSound = false;
OUString url;
if( !(rSound >>= bStopSound) )
bStopSound = false;
rSound >>= url;
if( !bStopSound && url.isEmpty() )
return SoundPlayerSharedPtr();
stopSlideTransitionSound();
if (!url.isEmpty())
{
try
{
mpCurrentSlideTransitionSound = SoundPlayer::create(
maEventMultiplexer, url, mxComponentContext, *this);
mpCurrentSlideTransitionSound->setPlaybackLoop( bLoopSound );
}
catch (lang::NoSupportException const&)
{
// catch possible exceptions from SoundPlayer, since
// being not able to playback the sound is not a hard
// error here (still, the slide transition should be
// shown).
}
}
return mpCurrentSlideTransitionSound;
}
ActivitySharedPtr SlideShowImpl::createSlideTransition(
const uno::Reference< drawing::XDrawPage >& xDrawPage,
const SlideSharedPtr& rLeavingSlide,
const SlideSharedPtr& rEnteringSlide,
const EventSharedPtr& rTransitionEndEvent)
{
ENSURE_OR_THROW( !maViewContainer.empty(),
"createSlideTransition(): No views" );
ENSURE_OR_THROW( rEnteringSlide,
"createSlideTransition(): No entering slide" );
// return empty transition, if slide transitions
// are disabled.
if (mbNoSlideTransitions)
return ActivitySharedPtr();
// retrieve slide change parameters from XDrawPage
uno::Reference< beans::XPropertySet > xPropSet( xDrawPage,
uno::UNO_QUERY );
if( !xPropSet.is() )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Slide has no PropertySet - assuming no transition" );
return ActivitySharedPtr();
}
sal_Int16 nTransitionType(0);
if( !getPropertyValue( nTransitionType,
xPropSet,
u"TransitionType"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Could not extract slide transition type from XDrawPage - assuming no transition" );
return ActivitySharedPtr();
}
sal_Int16 nTransitionSubType(0);
if( !getPropertyValue( nTransitionSubType,
xPropSet,
u"TransitionSubtype"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Could not extract slide transition subtype from XDrawPage - assuming no transition" );
return ActivitySharedPtr();
}
bool bTransitionDirection(false);
if( !getPropertyValue( bTransitionDirection,
xPropSet,
u"TransitionDirection"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Could not extract slide transition direction from XDrawPage - assuming default direction" );
}
sal_Int32 aUnoColor(0);
if( !getPropertyValue( aUnoColor,
xPropSet,
u"TransitionFadeColor"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Could not extract slide transition fade color from XDrawPage - assuming black" );
}
const RGBColor aTransitionFadeColor( unoColor2RGBColor( aUnoColor ));
uno::Any aSound;
bool bLoopSound = false;
if( !getPropertyValue( aSound, xPropSet, u"Sound"_ustr) )
SAL_INFO("slideshow", "createSlideTransition(): Could not determine transition sound effect URL from XDrawPage - using no sound" );
if( !getPropertyValue( bLoopSound, xPropSet, u"LoopSound"_ustr ) )
SAL_INFO("slideshow", "createSlideTransition(): Could not get slide property 'LoopSound' - using no sound" );
NumberAnimationSharedPtr pTransition(
TransitionFactory::createSlideTransition(
rLeavingSlide,
rEnteringSlide,
maViewContainer,
maScreenUpdater,
maEventMultiplexer,
mxOptionalTransitionFactory,
nTransitionType,
nTransitionSubType,
bTransitionDirection,
aTransitionFadeColor,
resetSlideTransitionSound( aSound, bLoopSound ) ));
if( !pTransition )
return ActivitySharedPtr(); // no transition effect has been
// generated. Normally, that means
// that simply no transition is
// set on this slide.
double nTransitionDuration(0.0);
if( !getPropertyValue( nTransitionDuration,
xPropSet,
u"TransitionDuration"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"Could not extract slide transition duration from XDrawPage - assuming no transition" );
return ActivitySharedPtr();
}
sal_Int32 nMinFrames(5);
if( !getPropertyValue( nMinFrames,
xPropSet,
u"MinimalFrameNumber"_ustr) )
{
SAL_INFO("slideshow", "createSlideTransition(): "
"No minimal number of frames given - assuming 5" );
}
// prefetch slide transition bitmaps, but postpone it after
// displaySlide() has finished - sometimes, view size has not yet
// reached final size
maEventQueue.addEvent(
makeEvent( [pTransition] () {
pTransition->prefetch(); },
u"Animation::prefetch"_ustr));
return ActivitySharedPtr(
ActivitiesFactory::createSimpleActivity(
ActivitiesFactory::CommonParameters(
rTransitionEndEvent,
maEventQueue,
maActivitiesQueue,
nTransitionDuration,
nMinFrames,
false,
std::optional<double>(1.0),
0.0,
0.0,
ShapeSharedPtr(),
basegfx::B2DVector(rEnteringSlide->getSlideSize().getWidth(), rEnteringSlide->getSlideSize().getHeight()) ),
pTransition,
true ));
}
PolygonMap::iterator SlideShowImpl::findPolygons( uno::Reference<drawing::XDrawPage> const& xDrawPage)
{
// TODO(P2): optimize research in the map.
return maPolygons.find(xDrawPage);
}
SlideSharedPtr SlideShowImpl::makeSlide(
uno::Reference<drawing::XDrawPage> const& xDrawPage,
uno::Reference<drawing::XDrawPagesSupplier> const& xDrawPages,
uno::Reference<animations::XAnimationNode> const& xRootNode )
{
if( !xDrawPage.is() )
return SlideSharedPtr();
//Retrieve polygons for the current slide
PolygonMap::iterator aIter = findPolygons(xDrawPage);
const SlideSharedPtr pSlide( createSlide(xDrawPage,
xDrawPages,
xRootNode,
maEventQueue,
maEventMultiplexer,
maScreenUpdater,
maActivitiesQueue,
maUserEventQueue,
*this,
*this,
maViewContainer,
mxComponentContext,
maShapeEventListeners,
maShapeCursors,
(aIter != maPolygons.end()) ? aIter->second : PolyPolygonVector(),
maUserPaintColor ? *maUserPaintColor : RGBColor(),
maUserPaintStrokeWidth,
!!maUserPaintColor,
mbImageAnimationsAllowed,
mbDisableAnimationZOrder) );
// prefetch show content (reducing latency for slide
// bitmap and effect start later on)
pSlide->prefetch();
return pSlide;
}
void SlideShowImpl::requestWaitSymbol()
{
++mnWaitSymbolRequestCount;
OSL_ASSERT(mnWaitSymbolRequestCount>0);
if (mnWaitSymbolRequestCount == 1)
{
if( !mpWaitSymbol )
{
// fall back to cursor
requestCursor(calcActiveCursor(mnCurrentCursor));
}
else
mpWaitSymbol->show();
}
}
void SlideShowImpl::releaseWaitSymbol()
{
--mnWaitSymbolRequestCount;
OSL_ASSERT(mnWaitSymbolRequestCount>=0);
if (mnWaitSymbolRequestCount == 0)
{
if( !mpWaitSymbol )
{
// fall back to cursor
requestCursor(calcActiveCursor(mnCurrentCursor));
}
else
mpWaitSymbol->hide();
}
}
sal_Int16 SlideShowImpl::calcActiveCursor( sal_Int16 nCursorShape ) const
{
if( mnWaitSymbolRequestCount>0 && !mpWaitSymbol ) // enforce wait cursor
nCursorShape = awt::SystemPointer::WAIT;
else if( !mbMouseVisible ) // enforce INVISIBLE
nCursorShape = awt::SystemPointer::INVISIBLE;
else if( maUserPaintColor &&
nCursorShape == awt::SystemPointer::ARROW )
nCursorShape = awt::SystemPointer::PEN;
return nCursorShape;
}
void SlideShowImpl::stopShow()
{
// Force-end running animation
// ===========================
if (mpCurrentSlide)
{
mpCurrentSlide->hide();
//Register polygons in the map
if(findPolygons(mpCurrentSlide->getXDrawPage()) != maPolygons.end())
maPolygons.erase(mpCurrentSlide->getXDrawPage());
maPolygons.insert(make_pair(mpCurrentSlide->getXDrawPage(),mpCurrentSlide->getPolygons()));
}
// clear all queues
maEventQueue.clear();
maActivitiesQueue.clear();
// Attention: we MUST clear the user event queue here,
// this is because the current slide might have registered
// shape events (click or enter/leave), which might
// otherwise dangle forever in the queue (because of the
// shared ptr nature). If someone needs to change this:
// somehow unregister those shapes at the user event queue
// on notifySlideEnded().
maUserEventQueue.clear();
// re-enable automatic effect advancement
// (maEventQueue.clear() above might have killed
// maEventMultiplexer's tick events)
if (mbAutomaticAdvancementMode)
{
// toggle automatic mode (enabling just again is
// ignored by EventMultiplexer)
maEventMultiplexer.setAutomaticMode( false );
maEventMultiplexer.setAutomaticMode( true );
}
}
class SlideShowImpl::PrefetchPropertiesFunc
{
public:
PrefetchPropertiesFunc( SlideShowImpl * that_,
bool& rbSkipAllMainSequenceEffects,
bool& rbSkipSlideTransition)
: mpSlideShowImpl(that_),
mrbSkipAllMainSequenceEffects(rbSkipAllMainSequenceEffects),
mrbSkipSlideTransition(rbSkipSlideTransition)
{}
void operator()( beans::PropertyValue const& rProperty ) const {
if (rProperty.Name == "Prefetch" )
{
uno::Sequence<uno::Any> seq;
if ((rProperty.Value >>= seq) && seq.getLength() == 2)
{
seq[0] >>= mpSlideShowImpl->mxPrefetchSlide;
seq[1] >>= mpSlideShowImpl->mxPrefetchAnimationNode;
}
}
else if ( rProperty.Name == "SkipAllMainSequenceEffects" )
{
rProperty.Value >>= mrbSkipAllMainSequenceEffects;
}
else if ( rProperty.Name == "SkipSlideTransition" )
{
rProperty.Value >>= mrbSkipSlideTransition;
}
else
{
SAL_WARN( "slideshow", rProperty.Name );
}
}
private:
SlideShowImpl *const mpSlideShowImpl;
bool& mrbSkipAllMainSequenceEffects;
bool& mrbSkipSlideTransition;
};
sal_Bool SlideShowImpl::createLOKSlideRenderer(
sal_Int32& nViewWidth, sal_Int32& nViewHeight,
sal_Bool bRenderMasterPage, sal_Bool bRenderBackground,
uno::Reference<drawing::XDrawPage> const& xDrawPage,
uno::Reference<drawing::XDrawPagesSupplier> const& xDrawPages,
uno::Reference<animations::XAnimationNode> const& xRootNode)
{
if (!xDrawPage.is())
return false;
//Retrieve polygons for the current slide
PolygonMap::iterator aIter = findPolygons(xDrawPage);
mpCurrentSlide = createSlide(xDrawPage,
xDrawPages,
xRootNode,
maEventQueue,
maEventMultiplexer,
maScreenUpdater,
maActivitiesQueue,
maUserEventQueue,
*this,
*this,
maViewContainer,
mxComponentContext,
maShapeEventListeners,
maShapeCursors,
(aIter != maPolygons.end()) ? aIter->second : PolyPolygonVector(),
maUserPaintColor ? *maUserPaintColor : RGBColor(),
maUserPaintStrokeWidth,
!!maUserPaintColor,
mbImageAnimationsAllowed,
mbDisableAnimationZOrder);
if (!mpCurrentSlide)
return false;
const Size& rDeviceSize = mpCurrentSlide->createLOKSlideRenderer(nViewWidth, nViewHeight,
bRenderBackground,
bRenderMasterPage);
nViewWidth = rDeviceSize.getWidth();
nViewHeight = rDeviceSize.getHeight();
return (nViewWidth > 0 && nViewHeight > 0);
}
sal_Bool SlideShowImpl::renderNextLOKSlideLayer(sal_Int64 nBufferPointer, sal_Bool& bIsBitmapLayer, OUString& rJsonMsg)
{
if (!mpCurrentSlide)
return true;
auto pBuffer = reinterpret_cast<unsigned char*>(nBufferPointer);
bool bBitmapRendered = false;
OString sMsg;
bool bDone = mpCurrentSlide->renderNextLOKSlideLayer(pBuffer, bBitmapRendered, sMsg);
bIsBitmapLayer = bBitmapRendered;
rJsonMsg = OUString::fromUtf8(sMsg);
return bDone;
}
void SlideShowImpl::displaySlide(
uno::Reference<drawing::XDrawPage> const& xSlide,
uno::Reference<drawing::XDrawPagesSupplier> const& xDrawPages,
uno::Reference<animations::XAnimationNode> const& xRootNode,
uno::Sequence<beans::PropertyValue> const& rProperties )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return;
maEffectRewinder.setRootAnimationNode(xRootNode);
maEffectRewinder.setCurrentSlide(xSlide);
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
mxDrawPagesSupplier = xDrawPages;
mxSBD = uno::Reference<document::XStorageBasedDocument>(mxDrawPagesSupplier, uno::UNO_QUERY);
stopShow(); // MUST call that: results in
// maUserEventQueue.clear(). What's more,
// stopShow()'s currSlide->hide() call is
// now also required, notifySlideEnded()
// relies on that
// unconditionally. Otherwise, genuine
// shape animations (drawing layer and
// GIF) will not be stopped.
bool bSkipAllMainSequenceEffects (false);
bool bSkipSlideTransition (false);
std::for_each( rProperties.begin(),
rProperties.end(),
PrefetchPropertiesFunc(this, bSkipAllMainSequenceEffects, bSkipSlideTransition) );
OSL_ENSURE( !maViewContainer.empty(), "### no views!" );
if (maViewContainer.empty())
return;
// this here might take some time
{
WaitSymbolLock aLock (*this);
mpPreviousSlide = mpCurrentSlide;
mpCurrentSlide.reset();
if (matches( mpPrefetchSlide, xSlide, xRootNode ))
{
// prefetched slide matches:
mpCurrentSlide = mpPrefetchSlide;
}
else
mpCurrentSlide = makeSlide( xSlide, xDrawPages, xRootNode );
OSL_ASSERT( mpCurrentSlide );
if (mpCurrentSlide)
{
basegfx::B2DSize oldSlideSize;
if( mpPreviousSlide )
oldSlideSize = basegfx::B2DSize( mpPreviousSlide->getSlideSize() );
basegfx::B2DSize const slideSize( mpCurrentSlide->getSlideSize() );
// push new transformation to all views, if size changed
if( !mpPreviousSlide || oldSlideSize != slideSize )
{
for( const auto& pView : maViewContainer )
pView->setViewSize( slideSize );
// explicitly notify view change here,
// because transformation might have changed:
// optimization, this->notifyViewChange() would
// repaint slide which is not necessary.
maEventMultiplexer.notifyViewsChanged();
}
// create slide transition, and add proper end event
// (which then starts the slide effects
// via CURRENT_SLIDE.show())
ActivitySharedPtr pSlideChangeActivity (
createSlideTransition(
mpCurrentSlide->getXDrawPage(),
mpPreviousSlide,
mpCurrentSlide,
makeEvent(
[this] () { this->notifySlideTransitionEnded(false); },
u"SlideShowImpl::notifySlideTransitionEnded"_ustr)));
if (bSkipSlideTransition)
{
// The transition activity was created for the side effects
// (like sound transitions). Because we want to skip the
// actual transition animation we do not need the activity
// anymore.
pSlideChangeActivity.reset();
}
if (pSlideChangeActivity)
{
// factory generated a slide transition - activate it!
maActivitiesQueue.addActivity( pSlideChangeActivity );
}
else
{
// no transition effect on this slide - schedule slide
// effect start event right away.
maEventQueue.addEvent(
makeEvent(
[this] () { this->notifySlideTransitionEnded(true); },
u"SlideShowImpl::notifySlideTransitionEnded"_ustr));
}
}
} // finally
maListenerContainer.forEach(
[](uno::Reference<presentation::XSlideShowListener> const& xListener)
{
xListener->slideTransitionStarted();
});
// We are currently rewinding an effect. This lead us from the next
// slide to this one. To complete this we have to play back all main
// sequence effects on this slide.
if (bSkipAllMainSequenceEffects)
maEffectRewinder.skipAllMainSequenceEffects();
}
void SlideShowImpl::redisplayCurrentSlide()
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
stopShow();
OSL_ENSURE( !maViewContainer.empty(), "### no views!" );
if (maViewContainer.empty())
return;
// No transition effect on this slide - schedule slide
// effect start event right away.
maEventQueue.addEvent(
makeEvent( [this] () { this->notifySlideTransitionEnded(true); },
u"SlideShowImpl::notifySlideTransitionEnded"_ustr));
maListenerContainer.forEach(
[](uno::Reference<presentation::XSlideShowListener> const& xListener)
{
xListener->slideTransitionStarted();
});
}
sal_Bool SlideShowImpl::nextEffect()
{
mbMovingForward = true;
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
if (mbShowPaused)
return true;
else
return maEventMultiplexer.notifyNextEffect();
}
sal_Bool SlideShowImpl::previousEffect()
{
mbMovingForward = false;
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
if (mbShowPaused)
return true;
else
{
return maEffectRewinder.rewind(
maScreenUpdater.createLock(),
[this]() { return this->redisplayCurrentSlide(); },
[this]() { return this->rewindEffectToPreviousSlide(); } );
}
}
void SlideShowImpl::rewindEffectToPreviousSlide()
{
// Show the wait symbol now and prevent it from showing temporary slide
// content while effects are played back.
WaitSymbolLock aLock (*this);
// A previous call to EffectRewinder::Rewind could not rewind the current
// effect because there are no effects on the current slide or none has
// yet been displayed. Go to the previous slide.
notifySlideEnded(true);
// Process pending events once more in order to have the following
// screen update show the last effect. Not sure whether this should be
// necessary.
maEventQueue.forceEmpty();
// We have to call the screen updater before the wait symbol is turned
// off. Otherwise the wait symbol would force the display of an
// intermediate state of the slide (before the effects are replayed.)
maScreenUpdater.commitUpdates();
}
sal_Bool SlideShowImpl::startShapeActivity(
uno::Reference<drawing::XShape> const& /*xShape*/ )
{
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
// TODO(F3): NYI
OSL_FAIL( "not yet implemented!" );
return false;
}
sal_Bool SlideShowImpl::stopShapeActivity(
uno::Reference<drawing::XShape> const& /*xShape*/ )
{
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
// TODO(F3): NYI
OSL_FAIL( "not yet implemented!" );
return false;
}
sal_Bool SlideShowImpl::pause( sal_Bool bPauseShow )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
if (bPauseShow)
mpPresTimer->pauseTimer();
else
mpPresTimer->continueTimer();
maEventMultiplexer.notifyPauseMode(bPauseShow);
mbShowPaused = bPauseShow;
return true;
}
uno::Reference<drawing::XDrawPage> SlideShowImpl::getCurrentSlide()
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return uno::Reference<drawing::XDrawPage>();
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
if (mpCurrentSlide)
return mpCurrentSlide->getXDrawPage();
else
return uno::Reference<drawing::XDrawPage>();
}
sal_Bool SlideShowImpl::addView(
uno::Reference<presentation::XSlideShowView> const& xView )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
// first of all, check if view has a valid canvas
ENSURE_OR_RETURN_FALSE( xView.is(), "addView(): Invalid view" );
ENSURE_OR_RETURN_FALSE( xView->getCanvas().is(),
"addView(): View does not provide a valid canvas" );
UnoViewSharedPtr const pView( createSlideView(
xView,
maEventQueue,
maEventMultiplexer ));
if (!maViewContainer.addView( pView ))
return false; // view already added
// initialize view content
// =======================
if (mpCurrentSlide)
{
// set view transformation
const basegfx::B2ISize slideSize = mpCurrentSlide->getSlideSize();
pView->setViewSize( basegfx::B2DSize(slideSize) );
}
// clear view area (since it's newly added,
// we need a clean slate)
pView->clearAll();
// broadcast newly added view
maEventMultiplexer.notifyViewAdded( pView );
// set current mouse ptr
pView->setCursorShape( calcActiveCursor(mnCurrentCursor) );
return true;
}
sal_Bool SlideShowImpl::removeView(
uno::Reference<presentation::XSlideShowView> const& xView )
{
osl::MutexGuard const guard( m_aMutex );
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
ENSURE_OR_RETURN_FALSE( xView.is(), "removeView(): Invalid view" );
UnoViewSharedPtr const pView( maViewContainer.removeView( xView ) );
if( !pView )
return false; // view was not added in the first place
// remove view from EventMultiplexer (mouse events etc.)
maEventMultiplexer.notifyViewRemoved( pView );
pView->_dispose();
return true;
}
drawing::PointSequenceSequence
lcl_createPointSequenceSequenceFromB2DPolygon(const basegfx::B2DPolygon& rPoly)
{
drawing::PointSequenceSequence aRetval;
//Create only one sequence for one pen drawing.
aRetval.realloc(1);
// Retrieve the sequence of points from aRetval
drawing::PointSequence* pOuterSequence = aRetval.getArray();
// Create points in this sequence from rPoly
pOuterSequence->realloc(rPoly.count());
// Get these points which are in an array
awt::Point* pInnerSequence = pOuterSequence->getArray();
for( sal_uInt32 n = 0; n < rPoly.count(); n++ )
{
//Create a point from the polygon
*pInnerSequence++ = awt::Point(basegfx::fround(rPoly.getB2DPoint(n).getX()),
basegfx::fround(rPoly.getB2DPoint(n).getY()));
}
return aRetval;
}
void lcl_setPropertiesToShape(const drawing::PointSequenceSequence& rPoints,
const cppcanvas::PolyPolygonSharedPtr pCanvasPolyPoly,
uno::Reference< drawing::XShape >& rPolyShape)
{
uno::Reference< beans::XPropertySet > aXPropSet(rPolyShape, uno::UNO_QUERY);
//Give the built PointSequenceSequence.
uno::Any aParam;
aParam <<= rPoints;
aXPropSet->setPropertyValue(u"PolyPolygon"_ustr, aParam);
//LineStyle : SOLID by default
drawing::LineStyle eLS;
eLS = drawing::LineStyle_SOLID;
aXPropSet->setPropertyValue(u"LineStyle"_ustr, uno::Any(eLS));
//LineCap : ROUND by default, same as in show mode
drawing::LineCap eLC;
eLC = drawing::LineCap_ROUND;
aXPropSet->setPropertyValue(u"LineCap"_ustr, uno::Any(eLC));
//LineColor
sal_uInt32 nLineColor = 0;
if (pCanvasPolyPoly)
nLineColor = pCanvasPolyPoly->getRGBALineColor();
//Transform polygon color from RRGGBBAA to AARRGGBB
aXPropSet->setPropertyValue(u"LineColor"_ustr, uno::Any(RGBAColor2UnoColor(nLineColor)));
//LineWidth
double fLineWidth = 0;
if (pCanvasPolyPoly)
fLineWidth = pCanvasPolyPoly->getStrokeWidth();
aXPropSet->setPropertyValue(u"LineWidth"_ustr, uno::Any(static_cast<sal_Int32>(fLineWidth)));
}
void SlideShowImpl::registerUserPaintPolygons( const uno::Reference< lang::XMultiServiceFactory >& xDocFactory )
{
//Retrieve Polygons if user ends presentation by context menu
if (mpCurrentSlide)
{
if(findPolygons(mpCurrentSlide->getXDrawPage()) != maPolygons.end())
maPolygons.erase(mpCurrentSlide->getXDrawPage());
maPolygons.insert(make_pair(mpCurrentSlide->getXDrawPage(),mpCurrentSlide->getPolygons()));
}
//Creating the layer for shapes drawn during slideshow
// query for the XLayerManager
uno::Reference< drawing::XLayerSupplier > xLayerSupplier(xDocFactory, uno::UNO_QUERY);
uno::Reference< container::XNameAccess > xNameAccess = xLayerSupplier->getLayerManager();
uno::Reference< drawing::XLayerManager > xLayerManager(xNameAccess, uno::UNO_QUERY);
// create layer
uno::Reference< drawing::XLayer > xDrawnInSlideshow;
uno::Any aPropLayer;
OUString sLayerName = u"DrawnInSlideshow"_ustr;
if (xNameAccess->hasByName(sLayerName))
{
xNameAccess->getByName(sLayerName) >>= xDrawnInSlideshow;
}
else
{
xDrawnInSlideshow = xLayerManager->insertNewByIndex(xLayerManager->getCount());
aPropLayer <<= sLayerName;
xDrawnInSlideshow->setPropertyValue(u"Name"_ustr, aPropLayer);
}
// ODF defaults from ctor of SdrLayer are not automatically set on the here
// created XLayer. Need to be done explicitly here.
aPropLayer <<= true;
xDrawnInSlideshow->setPropertyValue(u"IsVisible"_ustr, aPropLayer);
xDrawnInSlideshow->setPropertyValue(u"IsPrintable"_ustr, aPropLayer);
aPropLayer <<= false;
xDrawnInSlideshow->setPropertyValue(u"IsLocked"_ustr, aPropLayer);
//Register polygons for each slide
// The polygons are simplified using the Ramer-Douglas-Peucker algorithm.
// This is the therefore needed tolerance. Ideally the value should be user defined.
// For now a suitable value is found experimental.
constexpr double fTolerance(12);
for (const auto& rPoly : maPolygons)
{
PolyPolygonVector aPolygons = rPoly.second;
if (aPolygons.empty())
continue;
//Get shapes for the slide
css::uno::Reference<css::drawing::XShapes> Shapes = rPoly.first;
//Retrieve polygons for one slide
// #tdf112687 A pen drawing in slideshow is actually a chain of individual line shapes, where
// the end point of one line shape equals the start point of the next line shape.
// We collect these points into one B2DPolygon and use that to generate the shape on the
// slide.
::basegfx::B2DPolygon aDrawingPoints;
cppcanvas::PolyPolygonSharedPtr pFirstPolyPoly = aPolygons.front(); // for style properties
for (const auto& pPolyPoly : aPolygons)
{
// Actually, each item in aPolygons has two points, but wrapped in a cppcanvas::PopyPolygon.
::basegfx::B2DPolyPolygon b2DPolyPoly
= ::basegfx::unotools::b2DPolyPolygonFromXPolyPolygon2D(
pPolyPoly->getUNOPolyPolygon());
//Normally there is only one polygon
for (sal_uInt32 i = 0; i < b2DPolyPoly.count(); i++)
{
const ::basegfx::B2DPolygon& aPoly = b2DPolyPoly.getB2DPolygon(i);
if (aPoly.count() > 1) // otherwise skip it, count should be 2
{
if (aDrawingPoints.count() == 0)
{
aDrawingPoints.append(aPoly);
pFirstPolyPoly = pPolyPoly;
continue;
}
basegfx::B2DPoint aLast
= aDrawingPoints.getB2DPoint(aDrawingPoints.count() - 1);
if (aPoly.getB2DPoint(0).equal(aLast))
{
aDrawingPoints.append(aPoly, 1);
continue;
}
// Put what we have collected to the slide and then start a new pen drawing object
//create the PolyLineShape. The points will be in its PolyPolygon property.
uno::Reference<uno::XInterface> polyshape(
xDocFactory->createInstance(u"com.sun.star.drawing.PolyLineShape"_ustr));
uno::Reference<drawing::XShape> rPolyShape(polyshape, uno::UNO_QUERY);
//Add the shape to the slide
Shapes->add(rPolyShape);
//Construct a sequence of points sequence
aDrawingPoints
= basegfx::utils::createSimplifiedPolygon(aDrawingPoints, fTolerance);
const drawing::PointSequenceSequence aRetval
= lcl_createPointSequenceSequenceFromB2DPolygon(aDrawingPoints);
//Fill the properties
lcl_setPropertiesToShape(aRetval, pFirstPolyPoly, rPolyShape);
// make polygons special
xLayerManager->attachShapeToLayer(rPolyShape, xDrawnInSlideshow);
// Start next pen drawing object
aDrawingPoints.clear();
aDrawingPoints.append(aPoly);
pFirstPolyPoly = pPolyPoly;
}
}
}
// Bring remaining points to slide
if (aDrawingPoints.count() > 1)
{
//create the PolyLineShape. The points will be in its PolyPolygon property.
uno::Reference<uno::XInterface> polyshape(
xDocFactory->createInstance(u"com.sun.star.drawing.PolyLineShape"_ustr));
uno::Reference<drawing::XShape> rPolyShape(polyshape, uno::UNO_QUERY);
//Add the shape to the slide
Shapes->add(rPolyShape);
//Construct a sequence of points sequence
aDrawingPoints = basegfx::utils::createSimplifiedPolygon(aDrawingPoints, fTolerance);
drawing::PointSequenceSequence aRetval
= lcl_createPointSequenceSequenceFromB2DPolygon(aDrawingPoints);
//Fill the properties
lcl_setPropertiesToShape(aRetval, aPolygons.back(), rPolyShape);
// make polygons special
xLayerManager->attachShapeToLayer(rPolyShape, xDrawnInSlideshow);
}
}
}
sal_Bool SlideShowImpl::setProperty( beans::PropertyValue const& rProperty )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
// tdf#160669 IASS: if hint is about PrefetchSlide, flush it to avoid errors
if ( rProperty.Name == "HintSlideChanged" )
{
uno::Reference< drawing::XDrawPage > xDrawPage;
if (rProperty.Value >>= xDrawPage)
{
if (xDrawPage == mxPrefetchSlide)
{
mxPrefetchSlide.clear();
mpPrefetchSlide.reset();
}
}
}
if ( rProperty.Name == "AutomaticAdvancement" )
{
double nTimeout(0.0);
mbAutomaticAdvancementMode = (rProperty.Value >>= nTimeout);
if (mbAutomaticAdvancementMode)
{
maEventMultiplexer.setAutomaticTimeout( nTimeout );
}
maEventMultiplexer.setAutomaticMode( mbAutomaticAdvancementMode );
return true;
}
if ( rProperty.Name == "UserPaintColor" )
{
sal_Int32 nColor(0);
if (rProperty.Value >>= nColor)
{
OSL_ENSURE( mbMouseVisible,
"setProperty(): User paint overrides invisible mouse" );
// enable user paint
maUserPaintColor = unoColor2RGBColor(nColor);
if( mpCurrentSlide && !mpCurrentSlide->isPaintOverlayActive() )
mpCurrentSlide->enablePaintOverlay();
maEventMultiplexer.notifyUserPaintColor( *maUserPaintColor );
}
else
{
// disable user paint
maUserPaintColor.reset();
maEventMultiplexer.notifyUserPaintDisabled();
}
resetCursor();
return true;
}
//adding support for erasing features in UserPaintOverlay
if ( rProperty.Name == "EraseAllInk" )
{
bool bEraseAllInk(false);
if (rProperty.Value >>= bEraseAllInk)
{
OSL_ENSURE( mbMouseVisible,
"setProperty(): User paint overrides invisible mouse" );
// enable user paint
maEraseAllInk = bEraseAllInk;
maEventMultiplexer.notifyEraseAllInk( *maEraseAllInk );
}
return true;
}
if ( rProperty.Name == "SwitchPenMode" )
{
bool bSwitchPenMode(false);
if (rProperty.Value >>= bSwitchPenMode)
{
OSL_ENSURE( mbMouseVisible,
"setProperty(): User paint overrides invisible mouse" );
if(bSwitchPenMode){
// Switch to Pen Mode
maEventMultiplexer.notifySwitchPenMode();
}
}
return true;
}
if ( rProperty.Name == "SwitchEraserMode" )
{
bool bSwitchEraserMode(false);
if (rProperty.Value >>= bSwitchEraserMode)
{
OSL_ENSURE( mbMouseVisible,
"setProperty(): User paint overrides invisible mouse" );
if(bSwitchEraserMode){
// switch to Eraser mode
maEventMultiplexer.notifySwitchEraserMode();
}
}
return true;
}
if ( rProperty.Name == "EraseInk" )
{
sal_Int32 nEraseInk(100);
if (rProperty.Value >>= nEraseInk)
{
OSL_ENSURE( mbMouseVisible,
"setProperty(): User paint overrides invisible mouse" );
// enable user paint
maEraseInk = nEraseInk;
maEventMultiplexer.notifyEraseInkWidth( *maEraseInk );
}
return true;
}
// new Property for pen's width
if ( rProperty.Name == "UserPaintStrokeWidth" )
{
double nWidth(4.0);
if (rProperty.Value >>= nWidth)
{
OSL_ENSURE( mbMouseVisible,"setProperty(): User paint overrides invisible mouse" );
// enable user paint stroke width
maUserPaintStrokeWidth = nWidth;
maEventMultiplexer.notifyUserPaintStrokeWidth( maUserPaintStrokeWidth );
}
return true;
}
if ( rProperty.Name == "AdvanceOnClick" )
{
bool bAdvanceOnClick = false;
if (! (rProperty.Value >>= bAdvanceOnClick))
return false;
maUserEventQueue.setAdvanceOnClick( bAdvanceOnClick );
return true;
}
if ( rProperty.Name == "DisableAnimationZOrder" )
{
bool bDisableAnimationZOrder = false;
if (! (rProperty.Value >>= bDisableAnimationZOrder))
return false;
mbDisableAnimationZOrder = bDisableAnimationZOrder;
return true;
}
if ( rProperty.Name == "ImageAnimationsAllowed" )
{
if (! (rProperty.Value >>= mbImageAnimationsAllowed))
return false;
// TODO(F3): Forward to slides!
return true;
}
if ( rProperty.Name == "MouseVisible" )
{
if (! (rProperty.Value >>= mbMouseVisible))
return false;
requestCursor(mnCurrentCursor);
return true;
}
if ( rProperty.Name == "ForceManualAdvance" )
{
return (rProperty.Value >>= mbForceManualAdvance);
}
if ( rProperty.Name == "RehearseTimings" )
{
bool bRehearseTimings = false;
if (! (rProperty.Value >>= bRehearseTimings))
return false;
if (bRehearseTimings)
{
// TODO(Q3): Move to slide
mpRehearseTimingsActivity = RehearseTimingsActivity::create(
SlideShowContext(
mpDummyPtr,
maEventQueue,
maEventMultiplexer,
maScreenUpdater,
maActivitiesQueue,
maUserEventQueue,
*this,
*this,
maViewContainer,
mxComponentContext,
mpBox2DDummyPtr ) );
}
else if (mpRehearseTimingsActivity)
{
// removes timer from all views:
mpRehearseTimingsActivity->dispose();
mpRehearseTimingsActivity.reset();
}
return true;
}
if ( rProperty.Name == "WaitSymbolBitmap" )
{
uno::Reference<rendering::XBitmap> xBitmap;
if (! (rProperty.Value >>= xBitmap))
return false;
mpWaitSymbol = WaitSymbol::create( xBitmap,
maScreenUpdater,
maEventMultiplexer,
maViewContainer );
return true;
}
if (rProperty.Name == "NavigationSlidePrev")
{
uno::Reference<rendering::XBitmap> xBitmap;
if (!(rProperty.Value >>= xBitmap))
return false;
mpNavigationPrev = SlideOverlayButton::create(
xBitmap, { 20, 10 }, [this](basegfx::B2DPoint) { notifySlideEnded(true); },
maScreenUpdater, maEventMultiplexer, maViewContainer);
return true;
}
if (rProperty.Name == "NavigationSlideMenu")
{
uno::Reference<rendering::XBitmap> xBitmap;
if (!(rProperty.Value >>= xBitmap))
return false;
mpNavigationMenu = SlideOverlayButton::create(
xBitmap, { xBitmap->getSize().Width + 48, 10 },
[this](basegfx::B2DPoint pos) {
maListenerContainer.forEach(
[pos](const uno::Reference<presentation::XSlideShowListener>& xListener) {
uno::Reference<presentation::XSlideShowNavigationListener> xNavListener(
xListener, uno::UNO_QUERY);
if (xNavListener.is())
xNavListener->contextMenuShow(
css::awt::Point(static_cast<sal_Int32>(floor(pos.getX())),
static_cast<sal_Int32>(floor(pos.getY()))));
});
},
maScreenUpdater, maEventMultiplexer, maViewContainer);
return true;
}
if (rProperty.Name == "NavigationSlideNext")
{
uno::Reference<rendering::XBitmap> xBitmap;
if (!(rProperty.Value >>= xBitmap))
return false;
mpNavigationNext = SlideOverlayButton::create(
xBitmap, { 2 * xBitmap->getSize().Width + 76, 10 }, [this](basegfx::B2DPoint) { notifySlideEnded(false); },
maScreenUpdater, maEventMultiplexer, maViewContainer);
return true;
}
if ( rProperty.Name == "PointerSymbolBitmap" )
{
uno::Reference<rendering::XBitmap> xBitmap;
if (! (rProperty.Value >>= xBitmap))
return false;
mpPointerSymbol = PointerSymbol::create( xBitmap,
maScreenUpdater,
maEventMultiplexer,
maViewContainer );
return true;
}
if ( rProperty.Name == "PointerVisible" )
{
bool visible;
if (!(rProperty.Value >>= visible))
return false;
if (!mbShowPaused)
mpPointerSymbol->setVisible(visible);
return true;
}
if ( rProperty.Name == "PointerPosition")
{
css::geometry::RealPoint2D pos;
if (! (rProperty.Value >>= pos))
return false;
if (!mbShowPaused)
mpPointerSymbol->viewsChanged(pos);
return true;
}
if (rProperty.Name == "NoSlideTransitions" )
{
return (rProperty.Value >>= mbNoSlideTransitions);
}
if ( rProperty.Name == "IsSoundEnabled" )
{
uno::Sequence<uno::Any> aValues;
uno::Reference<presentation::XSlideShowView> xView;
bool bValue (false);
if ((rProperty.Value >>= aValues)
&& aValues.getLength()==2
&& (aValues[0] >>= xView)
&& (aValues[1] >>= bValue))
{
// Look up the view.
auto iView = std::find_if(maViewContainer.begin(), maViewContainer.end(),
[&xView](const UnoViewSharedPtr& rxView) { return rxView && rxView->getUnoView() == xView; });
if (iView != maViewContainer.end())
{
// Store the flag at the view so that media shapes have
// access to it.
(*iView)->setIsSoundEnabled(bValue);
return true;
}
}
}
return false;
}
void SlideShowImpl::addSlideShowListener(
uno::Reference<presentation::XSlideShowListener> const& xListener )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return;
// container syncs with passed mutex ref
maListenerContainer.addInterface(xListener);
}
void SlideShowImpl::removeSlideShowListener(
uno::Reference<presentation::XSlideShowListener> const& xListener )
{
osl::MutexGuard const guard( m_aMutex );
// container syncs with passed mutex ref
maListenerContainer.removeInterface(xListener);
}
void SlideShowImpl::addShapeEventListener(
uno::Reference<presentation::XShapeEventListener> const& xListener,
uno::Reference<drawing::XShape> const& xShape )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
ShapeEventListenerMap::iterator aIter;
if( (aIter=maShapeEventListeners.find( xShape )) ==
maShapeEventListeners.end() )
{
// no entry for this shape -> create one
aIter = maShapeEventListeners.emplace(
xShape,
std::make_shared<comphelper::OInterfaceContainerHelper3<css::presentation::XShapeEventListener>>(
m_aMutex)).first;
}
// add new listener to broadcaster
if( aIter->second )
aIter->second->addInterface( xListener );
maEventMultiplexer.notifyShapeListenerAdded(xShape);
}
void SlideShowImpl::removeShapeEventListener(
uno::Reference<presentation::XShapeEventListener> const& xListener,
uno::Reference<drawing::XShape> const& xShape )
{
osl::MutexGuard const guard( m_aMutex );
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
ShapeEventListenerMap::iterator aIter;
if( (aIter = maShapeEventListeners.find( xShape )) !=
maShapeEventListeners.end() )
{
// entry for this shape found -> remove listener from
// helper object
ENSURE_OR_THROW(
aIter->second,
"SlideShowImpl::removeShapeEventListener(): "
"listener map contains NULL broadcast helper" );
aIter->second->removeInterface( xListener );
}
maEventMultiplexer.notifyShapeListenerRemoved(xShape);
}
void SlideShowImpl::setShapeCursor(
uno::Reference<drawing::XShape> const& xShape, sal_Int16 nPointerShape )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return;
// precondition: must only be called from the main thread!
DBG_TESTSOLARMUTEX();
ShapeCursorMap::iterator aIter;
if( (aIter=maShapeCursors.find( xShape )) == maShapeCursors.end() )
{
// no entry for this shape -> create one
if( nPointerShape != awt::SystemPointer::ARROW )
{
// add new entry, unless shape shall display
// normal pointer arrow -> no need to handle that
// case
maShapeCursors.emplace(xShape, nPointerShape);
}
}
else if( nPointerShape == awt::SystemPointer::ARROW )
{
// shape shall display normal cursor -> can disable
// the cursor and clear the entry
maShapeCursors.erase( xShape );
}
else
{
// existing entry found, update with new cursor ID
aIter->second = nPointerShape;
}
}
bool SlideShowImpl::requestCursor( sal_Int16 nCursorShape )
{
mnCurrentCursor = nCursorShape;
const sal_Int16 nActualCursor = calcActiveCursor(mnCurrentCursor);
// change all views to the requested cursor ID
for( const auto& pView : maViewContainer )
pView->setCursorShape( nActualCursor );
return nActualCursor==nCursorShape;
}
void SlideShowImpl::resetCursor()
{
mnCurrentCursor = awt::SystemPointer::ARROW;
const sal_Int16 nActualCursor = calcActiveCursor( mnCurrentCursor );
// change all views to the default cursor ID
for( const auto& pView : maViewContainer )
pView->setCursorShape( nActualCursor );
}
sal_Bool SlideShowImpl::update( double & nNextTimeout )
{
osl::MutexGuard const guard( m_aMutex );
if (isDisposed())
return false;
// precondition: update() must only be called from the
// main thread!
DBG_TESTSOLARMUTEX();
if( mbShowPaused )
{
// commit frame (might be repaints pending)
maScreenUpdater.commitUpdates();
return false;
}
else
{
// TODO(F2): re-evaluate whether that timer lagging makes
// sense.
// hold timer, while processing the queues:
// 1. when there is more than one active activity this ensures the
// same time for all activities and events
// 2. processing of events may lead to creation of further events
// that have zero delay. While the timer is stopped these events
// are processed in the same run.
{
//Get a shared-ptr that outlives the scope-guard which will
//ensure that the pointed-to-item exists in the case of a
//::dispose clearing mpPresTimer
std::shared_ptr<canvas::tools::ElapsedTime> xTimer(mpPresTimer);
comphelper::ScopeGuard scopeGuard(
[&xTimer]() { return xTimer->releaseTimer(); } );
xTimer->holdTimer();
// process queues
maEventQueue.process();
// #i118671# the call above may execute a macro bound to an object. In
// that case this macro may have destroyed this local slideshow so that it
// is disposed (see bugdoc at task). In that case, detect this and exit
// gently from this slideshow. Do not forget to disable the scoped
// call to mpPresTimer, this will be deleted if we are disposed.
if (isDisposed())
{
scopeGuard.dismiss();
return false;
}
maActivitiesQueue.process();
// commit frame to screen
maFrameSynchronization.Synchronize();
maScreenUpdater.commitUpdates();
// TODO(Q3): remove need to call dequeued() from
// activities. feels like a wart.
// Rationale for ActivitiesQueue::processDequeued(): when
// an activity ends, it usually pushed the end state to
// the animated shape in question, and ends the animation
// (which, in turn, will usually disable shape sprite
// mode). Disabling shape sprite mode causes shape
// repaint, which, depending on slide content, takes
// considerably more time than sprite updates. Thus, the
// last animation step tends to look delayed. To
// camouflage this, reaching end position and disabling
// sprite mode is split into two (normal Activity::end(),
// and Activity::dequeued()). Now, the reason to call
// commitUpdates() twice here is caused by the unrelated
// fact that during wait cursor display/hide, the screen
// is updated, and shows hidden sprites, but, in case of
// leaving the second commitUpdates() call out and punting
// that to the next round, no updated static slide
// content. In short, the last shape animation of a slide
// tends to blink at its end.
// process dequeued activities _after_ commit to screen
maActivitiesQueue.processDequeued();
// commit frame to screen
maScreenUpdater.commitUpdates();
}
// Time held until here
const bool bActivitiesLeft = ! maActivitiesQueue.isEmpty();
const bool bTimerEventsLeft = ! maEventQueue.isEmpty();
const bool bRet = (bActivitiesLeft || bTimerEventsLeft);
if (bRet)
{
// calc nNextTimeout value:
if (bActivitiesLeft)
{
// Activity queue is not empty. Tell caller that we would
// like to render another frame.
// Return a zero time-out to signal our caller to call us
// back as soon as possible. The actual timing, waiting the
// appropriate amount of time between frames, is then done
// by the maFrameSynchronization object.
nNextTimeout = 0;
maFrameSynchronization.Activate();
}
else
{
// timer events left:
// difference from current time (nota bene:
// time no longer held here!) to the next event in
// the event queue.
// #i61190# Retrieve next timeout only _after_
// processing activity queue
// ensure positive value:
nNextTimeout = std::max( 0.0, maEventQueue.nextTimeout() );
// There is no active animation so the frame rate does not
// need to be synchronized.
maFrameSynchronization.Deactivate();
}
mbSlideShowIdle = false;
}
#if defined(DBG_UTIL)
// when slideshow is idle, issue an XUpdatable::update() call
// exactly once after a previous animation sequence finished -
// this might trigger screen dumps on some canvas
// implementations
if( !mbSlideShowIdle &&
(!bRet ||
nNextTimeout > 1.0) )
{
for( const auto& pView : maViewContainer )
{
try
{
uno::Reference< presentation::XSlideShowView > xView( pView->getUnoView(),
uno::UNO_SET_THROW );
uno::Reference<util::XUpdatable> const xUpdatable(
xView->getCanvas(), uno::UNO_QUERY);
if (xUpdatable.is()) // not supported in PresenterCanvas
{
xUpdatable->update();
}
}
catch( uno::RuntimeException& )
{
throw;
}
catch( uno::Exception& )
{
TOOLS_WARN_EXCEPTION( "slideshow", "" );
}
}
mbSlideShowIdle = true;
}
#endif
return bRet;
}
}
void SlideShowImpl::notifySlideTransitionEnded( bool bPaintSlide )
{
osl::MutexGuard const guard( m_aMutex );
OSL_ENSURE( !isDisposed(), "### already disposed!" );
OSL_ENSURE( mpCurrentSlide,
"notifySlideTransitionEnded(): Invalid current slide" );
if (mpCurrentSlide)
{
mpCurrentSlide->update_settings( !!maUserPaintColor, maUserPaintColor ? *maUserPaintColor : RGBColor(), maUserPaintStrokeWidth );
// first init show, to give the animations
// the chance to register SlideStartEvents
const bool bBackgroundLayerRendered( !bPaintSlide );
mpCurrentSlide->show( bBackgroundLayerRendered );
maEventMultiplexer.notifySlideStartEvent();
}
}
void queryAutomaticSlideTransition( uno::Reference<drawing::XDrawPage> const& xDrawPage,
double& nAutomaticNextSlideTimeout,
bool& bHasAutomaticNextSlide )
{
// retrieve slide change parameters from XDrawPage
// ===============================================
uno::Reference< beans::XPropertySet > xPropSet( xDrawPage,
uno::UNO_QUERY );
sal_Int32 nChange(0);
if( !xPropSet.is() ||
!getPropertyValue( nChange,
xPropSet,
u"Change"_ustr) )
{
SAL_INFO("slideshow",
"queryAutomaticSlideTransition(): "
"Could not extract slide change mode from XDrawPage - assuming <none>" );
}
bHasAutomaticNextSlide = nChange == 1;
if( !xPropSet.is() ||
!getPropertyValue( nAutomaticNextSlideTimeout,
xPropSet,
u"HighResDuration"_ustr) )
{
SAL_INFO("slideshow",
"queryAutomaticSlideTransition(): "
"Could not extract slide transition timeout from "
"XDrawPage - assuming 1 sec" );
}
}
void SlideShowImpl::notifySlideAnimationsEnded()
{
osl::MutexGuard const guard( m_aMutex );
//Draw polygons above animations
mpCurrentSlide->drawPolygons();
OSL_ENSURE( !isDisposed(), "### already disposed!" );
// This struct will receive the (interruptable) event,
// that triggers the notifySlideEnded() method.
InterruptableEventPair aNotificationEvents;
if( maEventMultiplexer.getAutomaticMode() )
{
OSL_ENSURE( ! mpRehearseTimingsActivity,
"unexpected: RehearseTimings mode!" );
// schedule a slide end event, with automatic mode's
// delay
aNotificationEvents = makeInterruptableDelay(
[this]() { return this->notifySlideEnded( false ); },
maEventMultiplexer.getAutomaticTimeout() );
}
else
{
OSL_ENSURE( mpCurrentSlide,
"notifySlideAnimationsEnded(): Invalid current slide!" );
bool bHasAutomaticNextSlide=false;
double nAutomaticNextSlideTimeout=0.0;
queryAutomaticSlideTransition(mpCurrentSlide->getXDrawPage(),
nAutomaticNextSlideTimeout,
bHasAutomaticNextSlide);
// check whether slide transition should happen
// 'automatically'. If yes, simply schedule the
// specified timeout.
// NOTE: mbForceManualAdvance and mpRehearseTimingsActivity
// override any individual slide setting, to always
// step slides manually.
if( !mbForceManualAdvance &&
!mpRehearseTimingsActivity &&
bHasAutomaticNextSlide &&
mbMovingForward )
{
aNotificationEvents = makeInterruptableDelay(
[this]() { return this->notifySlideEnded( false ); },
nAutomaticNextSlideTimeout);
// TODO(F2): Provide a mechanism to let the user override
// this automatic timeout via next()
}
else
{
if (mpRehearseTimingsActivity)
mpRehearseTimingsActivity->start();
// generate click event. Thus, the user must
// trigger the actual end of a slide. No need to
// generate interruptable event here, there's no
// timeout involved.
aNotificationEvents.mpImmediateEvent =
makeEvent( [this] () { this->notifySlideEnded(false); },
u"SlideShowImpl::notifySlideEnded"_ustr);
}
}
// register events on the queues. To make automatic slide
// changes interruptable, register the interruption event
// as a nextEffectEvent target. Note that the timeout
// event is optional (e.g. manual slide changes don't
// generate a timeout)
maUserEventQueue.registerNextEffectEvent(
aNotificationEvents.mpImmediateEvent );
if( aNotificationEvents.mpTimeoutEvent )
maEventQueue.addEvent( aNotificationEvents.mpTimeoutEvent );
// current slide's main sequence is over. Now should be
// the time to prefetch the next slide (if any), and
// prepare the initial slide bitmap (speeds up slide
// change setup time a lot). Show the wait cursor, this
// indeed might take some seconds.
{
WaitSymbolLock aLock (*this);
if (! matches( mpPrefetchSlide,
mxPrefetchSlide, mxPrefetchAnimationNode ))
{
mpPrefetchSlide = makeSlide( mxPrefetchSlide, mxDrawPagesSupplier,
mxPrefetchAnimationNode );
}
if (mpPrefetchSlide)
{
// ignore return value, this is just to populate
// Slide's internal bitmap buffer, such that the time
// needed to generate the slide bitmap is not spent
// when the slide change is requested.
mpPrefetchSlide->getCurrentSlideBitmap( *maViewContainer.begin() );
}
} // finally
maListenerContainer.forEach(
[](uno::Reference<presentation::XSlideShowListener> const& xListener)
{
xListener->slideAnimationsEnded();
});
}
void SlideShowImpl::notifySlideEnded (const bool bReverse)
{
osl::MutexGuard const guard( m_aMutex );
OSL_ENSURE( !isDisposed(), "### already disposed!" );
if (mpRehearseTimingsActivity && !bReverse)
{
const double time = mpRehearseTimingsActivity->stop();
if (mpRehearseTimingsActivity->hasBeenClicked())
{
// save time at current drawpage:
uno::Reference<beans::XPropertySet> xPropSet(
mpCurrentSlide->getXDrawPage(), uno::UNO_QUERY );
OSL_ASSERT( xPropSet.is() );
if (xPropSet.is())
{
xPropSet->setPropertyValue(
u"Change"_ustr,
uno::Any( static_cast<sal_Int32>(1) ) );
xPropSet->setPropertyValue(
u"Duration"_ustr,
uno::Any( static_cast<sal_Int32>(time) ) );
}
}
}
if (bReverse)
maEventMultiplexer.notifySlideEndEvent();
stopShow(); // MUST call that: results in
// maUserEventQueue.clear(). What's more,
// stopShow()'s currSlide->hide() call is
// now also required, notifySlideEnded()
// relies on that
// unconditionally. Otherwise, genuine
// shape animations (drawing layer and
// GIF) will not be stopped.
maListenerContainer.forEach(
[&bReverse]( const uno::Reference< presentation::XSlideShowListener >& xListener )
{ return xListener->slideEnded( bReverse ); } );
}
bool SlideShowImpl::notifyHyperLinkClicked( OUString const& hyperLink )
{
osl::MutexGuard const guard( m_aMutex );
maListenerContainer.forEach(
[&hyperLink]( const uno::Reference< presentation::XSlideShowListener >& xListener )
{ return xListener->hyperLinkClicked( hyperLink ); } );
return true;
}
/** Notification from eventmultiplexer that an animation event has occurred.
This will be forwarded to all registered XSlideShoeListener
*/
bool SlideShowImpl::handleAnimationEvent( const AnimationNodeSharedPtr& rNode )
{
osl::MutexGuard const guard( m_aMutex );
uno::Reference<animations::XAnimationNode> xNode( rNode->getXAnimationNode() );
switch( rNode->getState() )
{
case AnimationNode::ACTIVE:
maListenerContainer.forEach(
[&xNode]( const uno::Reference< animations::XAnimationListener >& xListener )
{ return xListener->beginEvent( xNode ); } );
break;
case AnimationNode::FROZEN:
case AnimationNode::ENDED:
maListenerContainer.forEach(
[&xNode]( const uno::Reference< animations::XAnimationListener >& xListener )
{ return xListener->endEvent( xNode ); } );
if(mpCurrentSlide->isPaintOverlayActive())
mpCurrentSlide->drawPolygons();
break;
default:
break;
}
return true;
}
std::shared_ptr<avmedia::MediaTempFile> SlideShowImpl::getMediaTempFile(const OUString& aUrl)
{
std::shared_ptr<avmedia::MediaTempFile> aRet;
#if !HAVE_FEATURE_AVMEDIA
(void)aUrl;
#else
if (!mxSBD.is())
return aRet;
comphelper::LifecycleProxy aProxy;
uno::Reference<io::XStream> xStream =
comphelper::OStorageHelper::GetStreamAtPackageURL(mxSBD->getDocumentStorage(), aUrl,
css::embed::ElementModes::READ, aProxy);
uno::Reference<io::XInputStream> xInStream = xStream->getInputStream();
if (xInStream.is())
{
sal_Int32 nLastDot = aUrl.lastIndexOf('.');
sal_Int32 nLastSlash = aUrl.lastIndexOf('/');
OUString sDesiredExtension;
if (nLastDot > nLastSlash && nLastDot+1 < aUrl.getLength())
sDesiredExtension = aUrl.copy(nLastDot);
OUString sTempUrl;
if (::avmedia::CreateMediaTempFile(xInStream, sTempUrl, sDesiredExtension))
aRet = std::make_shared<avmedia::MediaTempFile>(sTempUrl);
xInStream->closeInput();
}
#endif
return aRet;
}
//===== FrameSynchronization ==================================================
FrameSynchronization::FrameSynchronization (const double nFrameDuration)
: maTimer(),
mnFrameDuration(nFrameDuration),
mnNextFrameTargetTime(0),
mbIsActive(false)
{
MarkCurrentFrame();
}
void FrameSynchronization::MarkCurrentFrame()
{
mnNextFrameTargetTime = maTimer.getElapsedTime() + mnFrameDuration;
}
void FrameSynchronization::Synchronize()
{
if (mbIsActive)
{
// Do busy waiting for now.
for(;;)
{
double remainingTime = mnNextFrameTargetTime - maTimer.getElapsedTime();
if(remainingTime <= 0)
break;
// Try to sleep most of it.
int remainingMilliseconds = remainingTime * 1000;
if(remainingMilliseconds > 2)
std::this_thread::sleep_for(std::chrono::milliseconds(remainingMilliseconds - 2));
}
}
MarkCurrentFrame();
}
void FrameSynchronization::Activate()
{
mbIsActive = true;
}
void FrameSynchronization::Deactivate()
{
mbIsActive = false;
}
} // anon namespace
extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
slideshow_SlideShowImpl_get_implementation(
css::uno::XComponentContext* context , css::uno::Sequence<css::uno::Any> const&)
{
return cppu::acquire(new SlideShowImpl(context));
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */