office-gobmx/test/source/sheet/datapilotfield.cxx
Thomas Arnhold 39d45390f4 removal of RTL_CONSTASCII_USTRINGPARAM for quoted OUStrings declarations
s/(OUString\s+[a-zA-Z_][A-Za-z0-9_]*\s*)\(\s*RTL_CONSTASCII_USTRINGPARAM\s*\((\s*"[^")]*?"\s*)\)\s*\)/$1\($2\)/gms

Change-Id: Iad20f242c80c4bdc69df17e2d7a69d58ea53654b
Reviewed-on: https://gerrit.libreoffice.org/2835
Reviewed-by: Thomas Arnhold <thomas@arnhold.org>
Tested-by: Thomas Arnhold <thomas@arnhold.org>
2013-03-19 10:48:30 +00:00

211 lines
8.9 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* Version: MPL 1.1 / GPLv3+ / LGPLv3+
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License or as specified alternatively below. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* Major Contributor(s):
* Copyright (C) 2011 Markus Mohrhard <markus.mohrhard@googlemail.com> (initial developer)
*
* All Rights Reserved.
*
* For minor contributions see the git repository.
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 3 or later (the "GPLv3+"), or
* the GNU Lesser General Public License Version 3 or later (the "LGPLv3+"),
* in which case the provisions of the GPLv3+ or the LGPLv3+ are applicable
* instead of those above.
*/
#include <test/sheet/datapilotfield.hxx>
#include <com/sun/star/sheet/XSpreadsheetDocument.hpp>
#include <com/sun/star/sheet/XSpreadsheet.hpp>
#include <com/sun/star/sheet/XDataPilotTablesSupplier.hpp>
#include <com/sun/star/sheet/XDataPilotTables.hpp>
#include <com/sun/star/sheet/XDataPilotDescriptor.hpp>
#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/sheet/DataPilotFieldSortInfo.hpp>
#include <com/sun/star/sheet/DataPilotFieldSortMode.hpp>
#include <com/sun/star/sheet/DataPilotFieldReferenceItemType.hpp>
#include <com/sun/star/sheet/DataPilotFieldLayoutMode.hpp>
#include <com/sun/star/sheet/DataPilotFieldLayoutInfo.hpp>
#include <com/sun/star/sheet/DataPilotFieldReference.hpp>
#include <com/sun/star/sheet/DataPilotFieldAutoShowInfo.hpp>
#include <rtl/ustring.hxx>
#include "cppunit/extensions/HelperMacros.h"
#include <iostream>
using namespace com::sun::star::uno;
namespace apitest {
void DataPilotField::testSortInfo()
{
uno::Reference< beans::XPropertySet> xPropSet(init(),UNO_QUERY_THROW);
sheet::DataPilotFieldSortInfo aSortInfoValue;
rtl::OUString aSortInfo("SortInfo");
aSortInfoValue.Field = rtl::OUString("Col1");
aSortInfoValue.IsAscending = false;
aSortInfoValue.Mode = sheet::DataPilotFieldSortMode::MANUAL;
uno::Any xValue;
xValue <<= aSortInfoValue;
xPropSet->setPropertyValue(aSortInfo, xValue);
sheet::DataPilotFieldSortInfo aNewSortInfoValue;
xValue = xPropSet->getPropertyValue(aSortInfo);
CPPUNIT_ASSERT( xValue >>= aNewSortInfoValue );
CPPUNIT_ASSERT_MESSAGE("set value should be the same as got value", aNewSortInfoValue.Field == aSortInfoValue.Field
&& aNewSortInfoValue.Mode == aSortInfoValue.Mode && aNewSortInfoValue.IsAscending == aSortInfoValue.IsAscending);
//setting HasSortInfo only makes sense for false, for true the uno implementation does nothing
sal_Bool bHasSortInfo;
rtl::OUString aHasSortInfo("HasSortInfo");
xValue = xPropSet->getPropertyValue(aHasSortInfo);
CPPUNIT_ASSERT( xValue >>= bHasSortInfo );
CPPUNIT_ASSERT_MESSAGE("should have sort info", bHasSortInfo);
bHasSortInfo = false;
xValue <<= bHasSortInfo;
xPropSet->setPropertyValue(aHasSortInfo, xValue);
xValue = xPropSet->getPropertyValue(aHasSortInfo);
CPPUNIT_ASSERT( xValue >>= bHasSortInfo );
CPPUNIT_ASSERT_MESSAGE("should have no sort info", !bHasSortInfo);
}
void DataPilotField::testLayoutInfo()
{
uno::Reference< beans::XPropertySet > xPropSet(init(),UNO_QUERY_THROW);
sheet::DataPilotFieldLayoutInfo aLayoutInfoValue;
rtl::OUString aLayoutInfo("LayoutInfo");
aLayoutInfoValue.AddEmptyLines = false;
aLayoutInfoValue.LayoutMode = sheet::DataPilotFieldLayoutMode::OUTLINE_SUBTOTALS_BOTTOM;
uno::Any xValue;
xValue <<= aLayoutInfoValue;
xPropSet->setPropertyValue(aLayoutInfo, xValue);
sheet::DataPilotFieldLayoutInfo aNewLayoutInfoValue;
xValue = xPropSet->getPropertyValue(aLayoutInfo);
CPPUNIT_ASSERT( xValue >>= aNewLayoutInfoValue );
CPPUNIT_ASSERT_MESSAGE("set value should be the same as the got value", aNewLayoutInfoValue.LayoutMode == aLayoutInfoValue.LayoutMode &&
aNewLayoutInfoValue.AddEmptyLines == aLayoutInfoValue.AddEmptyLines);
//setting HasLayoutInfo only makes sense for false, tor true the uno implementation does nothing
sal_Bool bHasLayoutInfo;
rtl::OUString aHasLayoutInfo("HasLayoutInfo");
xValue = xPropSet->getPropertyValue(aHasLayoutInfo);
CPPUNIT_ASSERT( xValue >>= bHasLayoutInfo );
CPPUNIT_ASSERT_MESSAGE("should have layout information", bHasLayoutInfo);
bHasLayoutInfo = false;
xValue <<= bHasLayoutInfo;
xPropSet->setPropertyValue(aHasLayoutInfo, xValue);
xValue = xPropSet->getPropertyValue(aHasLayoutInfo);
CPPUNIT_ASSERT( xValue >>= bHasLayoutInfo );
CPPUNIT_ASSERT_MESSAGE("should have no longer sort information", !bHasLayoutInfo);
}
void DataPilotField::testAutoShowInfo()
{
uno::Reference< beans::XPropertySet > xPropSet(init(),UNO_QUERY_THROW);
sheet::DataPilotFieldAutoShowInfo aAutoShowInfoValue;
aAutoShowInfoValue.DataField = rtl::OUString("Col1");
aAutoShowInfoValue.IsEnabled = true;
rtl::OUString aAutoShowInfo("AutoShowInfo");
uno::Any xValue;
xValue <<= aAutoShowInfoValue;
xPropSet->setPropertyValue(aAutoShowInfo, xValue);
sheet::DataPilotFieldAutoShowInfo aNewAutoShowInfoValue;
xValue = xPropSet->getPropertyValue(aAutoShowInfo);
CPPUNIT_ASSERT( xValue >>= aNewAutoShowInfoValue );
CPPUNIT_ASSERT_MESSAGE("set value should be the same as the got value", aNewAutoShowInfoValue.DataField == aAutoShowInfoValue.DataField &&
aNewAutoShowInfoValue.IsEnabled == aAutoShowInfoValue.IsEnabled);
//setting HasLayoutInfo only makes sense for false, tor true the uno implementation does nothing
sal_Bool bHasAutoShowInfo;
rtl::OUString aHasAutoShowInfo("HasAutoShowInfo");
xValue = xPropSet->getPropertyValue(aHasAutoShowInfo);
CPPUNIT_ASSERT( xValue >>= bHasAutoShowInfo );
CPPUNIT_ASSERT_MESSAGE("should have AutoShow information", bHasAutoShowInfo);
bHasAutoShowInfo = false;
xValue <<= bHasAutoShowInfo;
xPropSet->setPropertyValue(aHasAutoShowInfo, xValue);
xValue = xPropSet->getPropertyValue(aHasAutoShowInfo);
CPPUNIT_ASSERT( xValue >>= bHasAutoShowInfo );
CPPUNIT_ASSERT_MESSAGE("should have no longer AutoShow information", !bHasAutoShowInfo);
}
void DataPilotField::testReference()
{
uno::Reference< beans::XPropertySet > xPropSet(init(),UNO_QUERY_THROW);
sheet::DataPilotFieldReference aReferenceValue;
aReferenceValue.ReferenceField = rtl::OUString("Col1");
aReferenceValue.ReferenceItemType = sheet::DataPilotFieldReferenceItemType::NAMED;
rtl::OUString aReference("Reference");
uno::Any xValue;
xValue <<= aReferenceValue;
xPropSet->setPropertyValue(aReference, xValue);
sheet::DataPilotFieldReference aNewReferenceValue;
xValue = xPropSet->getPropertyValue(aReference);
CPPUNIT_ASSERT( xValue >>= aNewReferenceValue );
CPPUNIT_ASSERT_MESSAGE("set value should be the same as the got value", aReferenceValue.ReferenceField == aNewReferenceValue.ReferenceField
&& aReferenceValue.ReferenceItemType == aNewReferenceValue.ReferenceItemType);
//setting HasReference only makes sense for false, tor true the uno implementation does nothing
sal_Bool bHasReference;
rtl::OUString aHasReference("HasReference");
xValue = xPropSet->getPropertyValue(aHasReference);
CPPUNIT_ASSERT( xValue >>= bHasReference );
CPPUNIT_ASSERT_MESSAGE("should have Reference information", bHasReference);
bHasReference = false;
xValue <<= bHasReference;
xPropSet->setPropertyValue(aHasReference, xValue);
xValue = xPropSet->getPropertyValue(aHasReference);
CPPUNIT_ASSERT( xValue >>= bHasReference );
CPPUNIT_ASSERT_MESSAGE("should have no longer reference information", !bHasReference);
}
void DataPilotField::testIsGroupField()
{
uno::Reference< beans::XPropertySet > xPropSet(init(),UNO_QUERY_THROW);
uno::Any xValue;
rtl::OUString aIsGroupField("IsGroupField");
sal_Bool bIsGroupField;
xValue = xPropSet->getPropertyValue(aIsGroupField);
CPPUNIT_ASSERT( xValue >>= bIsGroupField);
//only setting to false is supported
if (bIsGroupField)
{
bIsGroupField = false;
xValue <<= bIsGroupField;
xPropSet->setPropertyValue(aIsGroupField, xValue);
xValue = xPropSet->getPropertyValue(aIsGroupField);
CPPUNIT_ASSERT(xValue >>= bIsGroupField);
CPPUNIT_ASSERT_MESSAGE("setting IsGroupField is supported and should have happened", !bIsGroupField);
}
else
std::cout << "Could not test IsGroupField" << std::endl;
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */