office-gobmx/svx/source/svdraw/svdomeas.cxx
Yusuf Keten f69fa576c5 tdf#96505 Get rid of cargo cult long integer literals
Change-Id: Ic0cde7c087d54a80a57d2a2574fa1f3932192367
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/86311
Tested-by: Jenkins
Reviewed-by: Michael Stahl <michael.stahl@cib.de>
2020-01-08 14:00:31 +01:00

1440 lines
48 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <svx/dialmgr.hxx>
#include <svx/strings.hrc>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include <basegfx/point/b2dpoint.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/polygon/b2dpolypolygon.hxx>
#include <editeng/editdata.hxx>
#include <editeng/editobj.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/flditem.hxx>
#include <editeng/measfld.hxx>
#include <editeng/outliner.hxx>
#include <editeng/outlobj.hxx>
#include <math.h>
#include <svl/style.hxx>
#include <sdr/contact/viewcontactofsdrmeasureobj.hxx>
#include <sdr/properties/measureproperties.hxx>
#include <svx/svddrag.hxx>
#include <svx/svdhdl.hxx>
#include <svx/svdmodel.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdomeas.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdoutl.hxx>
#include <svx/svdpage.hxx>
#include <svx/svdpool.hxx>
#include <svx/svdtrans.hxx>
#include <svx/svdview.hxx>
#include <svx/sxmbritm.hxx>
#include <svx/sxmfsitm.hxx>
#include <sxmkitm.hxx>
#include <svx/sxmlhitm.hxx>
#include <sxmoitm.hxx>
#include <sxmsitm.hxx>
#include <sxmtaitm.hxx>
#include <svx/sxmtfitm.hxx>
#include <svx/sxmtpitm.hxx>
#include <svx/sxmtritm.hxx>
#include <svx/sxmuitm.hxx>
#include <svx/xlnedcit.hxx>
#include <svx/xlnedit.hxx>
#include <svx/xlnedwit.hxx>
#include <svx/xlnstcit.hxx>
#include <svx/xlnstit.hxx>
#include <svx/xlnstwit.hxx>
#include <svx/xlnwtit.hxx>
#include <svx/xpoly.hxx>
#include <unotools/syslocale.hxx>
#include <unotools/localedatawrapper.hxx>
#include <vcl/ptrstyle.hxx>
SdrMeasureObjGeoData::SdrMeasureObjGeoData() {}
SdrMeasureObjGeoData::~SdrMeasureObjGeoData() {}
OUString SdrMeasureObj::TakeRepresentation(SdrMeasureFieldKind eMeasureFieldKind) const
{
OUString aStr;
Fraction aMeasureScale(1, 1);
bool bTextRota90(false);
bool bShowUnit(false);
FieldUnit eMeasureUnit(FieldUnit::NONE);
FieldUnit eModUIUnit(FieldUnit::NONE);
const SfxItemSet& rSet = GetMergedItemSet();
bTextRota90 = rSet.Get(SDRATTR_MEASURETEXTROTA90).GetValue();
eMeasureUnit = rSet.Get(SDRATTR_MEASUREUNIT).GetValue();
aMeasureScale = rSet.Get(SDRATTR_MEASURESCALE).GetValue();
bShowUnit = rSet.Get(SDRATTR_MEASURESHOWUNIT).GetValue();
sal_Int16 nNumDigits = rSet.Get(SDRATTR_MEASUREDECIMALPLACES).GetValue();
switch(eMeasureFieldKind)
{
case SdrMeasureFieldKind::Value:
{
eModUIUnit = getSdrModelFromSdrObject().GetUIUnit();
if(eMeasureUnit == FieldUnit::NONE)
eMeasureUnit = eModUIUnit;
sal_Int32 nLen(GetLen(aPt2 - aPt1));
Fraction aFact(1,1);
if(eMeasureUnit != eModUIUnit)
{
// for the unit conversion
aFact *= GetMapFactor(eModUIUnit, eMeasureUnit).X();
}
if(aMeasureScale.GetNumerator() != aMeasureScale.GetDenominator())
{
aFact *= aMeasureScale;
}
if(aFact.GetNumerator() != aFact.GetDenominator())
{
// scale via BigInt, to avoid overruns
nLen = BigMulDiv(nLen, aFact.GetNumerator(), aFact.GetDenominator());
}
if(!aFact.IsValid())
{
aStr = "?";
}
else
{
aStr = getSdrModelFromSdrObject().GetMetricString(nLen, true, nNumDigits);
}
SvtSysLocale aSysLocale;
const LocaleDataWrapper& rLocaleDataWrapper = aSysLocale.GetLocaleData();
sal_Unicode cDec(rLocaleDataWrapper.getNumDecimalSep()[0]);
sal_Unicode cDecAlt(rLocaleDataWrapper.getNumDecimalSepAlt().toChar());
if(aStr.indexOf(cDec) != -1 || (cDecAlt && aStr.indexOf(cDecAlt) != -1))
{
sal_Int32 nLen2(aStr.getLength() - 1);
while(aStr[nLen2] == '0')
{
aStr = aStr.copy(0, nLen2);
nLen2--;
}
if(aStr[nLen2] == cDec || (cDecAlt && aStr[nLen2] == cDecAlt))
{
aStr = aStr.copy(0, nLen2);
nLen2--;
}
if(aStr.isEmpty())
aStr += "0";
}
break;
}
case SdrMeasureFieldKind::Unit:
{
if(bShowUnit)
{
eModUIUnit = getSdrModelFromSdrObject().GetUIUnit();
if(eMeasureUnit == FieldUnit::NONE)
eMeasureUnit = eModUIUnit;
aStr = SdrModel::GetUnitString(eMeasureUnit);
}
break;
}
case SdrMeasureFieldKind::Rotate90Blanks:
{
if(bTextRota90)
{
aStr = " ";
}
break;
}
}
return aStr;
}
// BaseProperties section
std::unique_ptr<sdr::properties::BaseProperties> SdrMeasureObj::CreateObjectSpecificProperties()
{
return std::make_unique<sdr::properties::MeasureProperties>(*this);
}
// DrawContact section
std::unique_ptr<sdr::contact::ViewContact> SdrMeasureObj::CreateObjectSpecificViewContact()
{
return std::make_unique<sdr::contact::ViewContactOfSdrMeasureObj>(*this);
}
SdrMeasureObj::SdrMeasureObj(SdrModel& rSdrModel)
: SdrTextObj(rSdrModel),
bTextDirty(false)
{
// #i25616#
mbSupportTextIndentingOnLineWidthChange = false;
}
SdrMeasureObj::SdrMeasureObj(
SdrModel& rSdrModel,
const Point& rPt1,
const Point& rPt2)
: SdrTextObj(rSdrModel),
aPt1(rPt1),
aPt2(rPt2),
bTextDirty(false)
{
// #i25616#
mbSupportTextIndentingOnLineWidthChange = false;
}
SdrMeasureObj::~SdrMeasureObj()
{
}
void SdrMeasureObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const
{
rInfo.bMoveAllowed =true;
rInfo.bResizeFreeAllowed=true;
rInfo.bResizePropAllowed=true;
rInfo.bRotateFreeAllowed=true;
rInfo.bRotate90Allowed =true;
rInfo.bMirrorFreeAllowed=true;
rInfo.bMirror45Allowed =true;
rInfo.bMirror90Allowed =true;
rInfo.bTransparenceAllowed = false;
rInfo.bShearAllowed =true;
rInfo.bEdgeRadiusAllowed=false;
rInfo.bNoOrthoDesired =true;
rInfo.bNoContortion =false;
rInfo.bCanConvToPath =false;
rInfo.bCanConvToPoly =true;
rInfo.bCanConvToPathLineToArea=false;
rInfo.bCanConvToPolyLineToArea=false;
rInfo.bCanConvToContour = LineGeometryUsageIsNecessary();
}
sal_uInt16 SdrMeasureObj::GetObjIdentifier() const
{
return sal_uInt16(OBJ_MEASURE);
}
struct ImpMeasureRec : public SdrDragStatUserData
{
Point aPt1;
Point aPt2;
css::drawing::MeasureTextHorzPos eWantTextHPos;
css::drawing::MeasureTextVertPos eWantTextVPos;
long nLineDist;
long nHelplineOverhang;
long nHelplineDist;
long nHelpline1Len;
long nHelpline2Len;
bool bBelowRefEdge;
bool bTextRota90;
bool bTextUpsideDown;
bool bTextAutoAngle;
long nTextAutoAngleView;
};
namespace {
struct ImpLineRec
{
Point aP1;
Point aP2;
};
}
struct ImpMeasurePoly
{
ImpLineRec aMainline1; // those with the 1st arrowhead
ImpLineRec aMainline2; // those with the 2nd arrowhead
ImpLineRec aMainline3; // those in between
ImpLineRec aHelpline1;
ImpLineRec aHelpline2;
Size aTextSize;
long nLineLen;
long nLineAngle;
long nTextAngle;
long nHlpAngle;
double nLineSin;
double nLineCos;
sal_uInt16 nMainlineCnt;
css::drawing::MeasureTextHorzPos eUsedTextHPos;
css::drawing::MeasureTextVertPos eUsedTextVPos;
long nLineWdt2; // half the line width
long nArrow1Len; // length of 1st arrowhead; for Center, use only half
long nArrow2Len; // length of 2nd arrowhead; for Center, use only half
long nArrow1Wdt; // width of 1st arrow
long nArrow2Wdt; // width of 2nd arrow
long nShortLineLen; // line length, if PfeileAussen (arrowheads on the outside)
bool bAutoUpsideDown; // UpsideDown via automation
bool bBreakedLine;
};
void SdrMeasureObj::ImpTakeAttr(ImpMeasureRec& rRec) const
{
rRec.aPt1 = aPt1;
rRec.aPt2 = aPt2;
const SfxItemSet& rSet = GetObjectItemSet();
rRec.eWantTextHPos =rSet.Get(SDRATTR_MEASURETEXTHPOS ).GetValue();
rRec.eWantTextVPos =rSet.Get(SDRATTR_MEASURETEXTVPOS ).GetValue();
rRec.nLineDist =rSet.Get(SDRATTR_MEASURELINEDIST ).GetValue();
rRec.nHelplineOverhang =rSet.Get(SDRATTR_MEASUREHELPLINEOVERHANG).GetValue();
rRec.nHelplineDist =rSet.Get(SDRATTR_MEASUREHELPLINEDIST ).GetValue();
rRec.nHelpline1Len =rSet.Get(SDRATTR_MEASUREHELPLINE1LEN ).GetValue();
rRec.nHelpline2Len =rSet.Get(SDRATTR_MEASUREHELPLINE2LEN ).GetValue();
rRec.bBelowRefEdge =rSet.Get(SDRATTR_MEASUREBELOWREFEDGE ).GetValue();
rRec.bTextRota90 =rSet.Get(SDRATTR_MEASURETEXTROTA90 ).GetValue();
rRec.bTextUpsideDown =static_cast<const SdrMeasureTextUpsideDownItem& >(rSet.Get(SDRATTR_MEASURETEXTUPSIDEDOWN )).GetValue();
rRec.bTextAutoAngle =rSet.Get(SDRATTR_MEASURETEXTAUTOANGLE ).GetValue();
rRec.nTextAutoAngleView=static_cast<const SdrMeasureTextAutoAngleViewItem&>(rSet.Get(SDRATTR_MEASURETEXTAUTOANGLEVIEW)).GetValue();
}
static long impGetLineStartEndDistance(const basegfx::B2DPolyPolygon& rPolyPolygon, long nNewWidth, bool bCenter)
{
const basegfx::B2DRange aPolygonRange(rPolyPolygon.getB2DRange());
const double fOldWidth(std::max(aPolygonRange.getWidth(), 1.0));
const double fScale(static_cast<double>(nNewWidth) / fOldWidth);
long nHeight(basegfx::fround(aPolygonRange.getHeight() * fScale));
if(bCenter)
{
nHeight /= 2;
}
return nHeight;
}
void SdrMeasureObj::ImpCalcGeometrics(const ImpMeasureRec& rRec, ImpMeasurePoly& rPol) const
{
Point aP1(rRec.aPt1);
Point aP2(rRec.aPt2);
Point aDelt(aP2); aDelt-=aP1;
rPol.aTextSize=GetTextSize();
rPol.nLineLen=GetLen(aDelt);
rPol.nLineWdt2=0;
long nArrow1Len=0; bool bArrow1Center=false;
long nArrow2Len=0; bool bArrow2Center=false;
long nArrow1Wdt=0;
long nArrow2Wdt=0;
rPol.nArrow1Wdt=0;
rPol.nArrow2Wdt=0;
long nArrowNeed=0;
long nShortLen=0;
bool bPfeileAussen = false;
const SfxItemSet& rSet = GetObjectItemSet();
sal_Int32 nLineWdt = rSet.Get(XATTR_LINEWIDTH).GetValue(); // line width
rPol.nLineWdt2 = (nLineWdt + 1) / 2;
nArrow1Wdt = rSet.Get(XATTR_LINESTARTWIDTH).GetValue();
if(nArrow1Wdt < 0)
nArrow1Wdt = -nLineWdt * nArrow1Wdt / 100; // <0 = relative
nArrow2Wdt = rSet.Get(XATTR_LINEENDWIDTH).GetValue();
if(nArrow2Wdt < 0)
nArrow2Wdt = -nLineWdt * nArrow2Wdt / 100; // <0 = relative
basegfx::B2DPolyPolygon aPol1(rSet.Get(XATTR_LINESTART).GetLineStartValue());
basegfx::B2DPolyPolygon aPol2(rSet.Get(XATTR_LINEEND).GetLineEndValue());
bArrow1Center = rSet.Get(XATTR_LINESTARTCENTER).GetValue();
bArrow2Center = rSet.Get(XATTR_LINEENDCENTER).GetValue();
nArrow1Len = impGetLineStartEndDistance(aPol1, nArrow1Wdt, bArrow1Center) - 1;
nArrow2Len = impGetLineStartEndDistance(aPol2, nArrow2Wdt, bArrow2Center) - 1;
// nArrowLen is already halved at bCenter.
// In the case of 2 arrowheads each 4mm long, we can't go below 10mm.
nArrowNeed=nArrow1Len+nArrow2Len+(nArrow1Wdt+nArrow2Wdt)/2;
if (rPol.nLineLen<nArrowNeed) bPfeileAussen = true;
nShortLen=(nArrow1Len+nArrow1Wdt + nArrow2Len+nArrow2Wdt) /2;
rPol.eUsedTextHPos=rRec.eWantTextHPos;
rPol.eUsedTextVPos=rRec.eWantTextVPos;
if (rPol.eUsedTextVPos == css::drawing::MeasureTextVertPos_AUTO)
rPol.eUsedTextVPos = css::drawing::MeasureTextVertPos_EAST;
bool bBrkLine=false;
if (rPol.eUsedTextVPos == css::drawing::MeasureTextVertPos_CENTERED)
{
OutlinerParaObject* pOutlinerParaObject = SdrTextObj::GetOutlinerParaObject();
if (pOutlinerParaObject!=nullptr && pOutlinerParaObject->GetTextObject().GetParagraphCount()==1)
{
bBrkLine=true; // dashed line if there's only on paragraph.
}
}
rPol.bBreakedLine=bBrkLine;
if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_AUTO) { // if text is too wide, push it outside
bool bOutside = false;
long nNeedSiz=!rRec.bTextRota90 ? rPol.aTextSize.Width() : rPol.aTextSize.Height();
if (nNeedSiz>rPol.nLineLen) bOutside = true; // text doesn't fit in between
if (bBrkLine) {
if (nNeedSiz+nArrowNeed>rPol.nLineLen) bPfeileAussen = true; // text fits in between, if arrowheads are on the outside
} else {
long nSmallNeed=nArrow1Len+nArrow2Len+(nArrow1Wdt+nArrow2Wdt)/2/4;
if (nNeedSiz+nSmallNeed>rPol.nLineLen) bPfeileAussen = true; // text fits in between, if arrowheads are on the outside
}
rPol.eUsedTextHPos=bOutside ? css::drawing::MeasureTextHorzPos_LEFTOUTSIDE : css::drawing::MeasureTextHorzPos_INSIDE;
}
if (rPol.eUsedTextHPos != css::drawing::MeasureTextHorzPos_INSIDE) bPfeileAussen = true;
rPol.nArrow1Wdt=nArrow1Wdt;
rPol.nArrow2Wdt=nArrow2Wdt;
rPol.nShortLineLen=nShortLen;
rPol.nArrow1Len=nArrow1Len;
rPol.nArrow2Len=nArrow2Len;
rPol.nLineAngle=GetAngle(aDelt);
double a = rPol.nLineAngle * F_PI18000;
double nLineSin=sin(a);
double nLineCos=cos(a);
rPol.nLineSin=nLineSin;
rPol.nLineCos=nLineCos;
rPol.nTextAngle=rPol.nLineAngle;
if (rRec.bTextRota90) rPol.nTextAngle+=9000;
rPol.bAutoUpsideDown=false;
if (rRec.bTextAutoAngle) {
long nTmpAngle=NormAngle36000(rPol.nTextAngle-rRec.nTextAutoAngleView);
if (nTmpAngle>=18000) {
rPol.nTextAngle+=18000;
rPol.bAutoUpsideDown=true;
}
}
if (rRec.bTextUpsideDown) rPol.nTextAngle+=18000;
rPol.nTextAngle=NormAngle36000(rPol.nTextAngle);
rPol.nHlpAngle=rPol.nLineAngle+9000;
if (rRec.bBelowRefEdge) rPol.nHlpAngle+=18000;
rPol.nHlpAngle=NormAngle36000(rPol.nHlpAngle);
double nHlpSin=nLineCos;
double nHlpCos=-nLineSin;
if (rRec.bBelowRefEdge) {
nHlpSin=-nHlpSin;
nHlpCos=-nHlpCos;
}
long nLineDist=rRec.nLineDist;
long nOverhang=rRec.nHelplineOverhang;
long nHelplineDist=rRec.nHelplineDist;
long dx= FRound(nLineDist*nHlpCos);
long dy=-FRound(nLineDist*nHlpSin);
long dxh1a= FRound((nHelplineDist-rRec.nHelpline1Len)*nHlpCos);
long dyh1a=-FRound((nHelplineDist-rRec.nHelpline1Len)*nHlpSin);
long dxh1b= FRound((nHelplineDist-rRec.nHelpline2Len)*nHlpCos);
long dyh1b=-FRound((nHelplineDist-rRec.nHelpline2Len)*nHlpSin);
long dxh2= FRound((nLineDist+nOverhang)*nHlpCos);
long dyh2=-FRound((nLineDist+nOverhang)*nHlpSin);
// extension line 1
rPol.aHelpline1.aP1=Point(aP1.X()+dxh1a,aP1.Y()+dyh1a);
rPol.aHelpline1.aP2=Point(aP1.X()+dxh2,aP1.Y()+dyh2);
// extension line 2
rPol.aHelpline2.aP1=Point(aP2.X()+dxh1b,aP2.Y()+dyh1b);
rPol.aHelpline2.aP2=Point(aP2.X()+dxh2,aP2.Y()+dyh2);
// dimension line
Point aMainlinePt1(aP1.X()+dx,aP1.Y()+dy);
Point aMainlinePt2(aP2.X()+dx,aP2.Y()+dy);
if (!bPfeileAussen) {
rPol.aMainline1.aP1=aMainlinePt1;
rPol.aMainline1.aP2=aMainlinePt2;
rPol.aMainline2=rPol.aMainline1;
rPol.aMainline3=rPol.aMainline1;
rPol.nMainlineCnt=1;
if (bBrkLine) {
long nNeedSiz=!rRec.bTextRota90 ? rPol.aTextSize.Width() : rPol.aTextSize.Height();
long nHalfLen=(rPol.nLineLen-nNeedSiz-nArrow1Wdt/4-nArrow2Wdt/4) /2;
rPol.nMainlineCnt=2;
rPol.aMainline1.aP2=aMainlinePt1;
rPol.aMainline1.aP2.AdjustX(nHalfLen );
RotatePoint(rPol.aMainline1.aP2,rPol.aMainline1.aP1,nLineSin,nLineCos);
rPol.aMainline2.aP1=aMainlinePt2;
rPol.aMainline2.aP1.AdjustX( -nHalfLen );
RotatePoint(rPol.aMainline2.aP1,rPol.aMainline2.aP2,nLineSin,nLineCos);
}
} else {
long nLen1=nShortLen; // arrowhead's width as line length outside of the arrowhead
long nLen2=nShortLen;
long nTextWdt=rRec.bTextRota90 ? rPol.aTextSize.Height() : rPol.aTextSize.Width();
if (!bBrkLine) {
if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) nLen1=nArrow1Len+nTextWdt;
if (rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) nLen2=nArrow2Len+nTextWdt;
}
rPol.aMainline1.aP1=aMainlinePt1;
rPol.aMainline1.aP2=aMainlinePt1; rPol.aMainline1.aP2.AdjustX( -nLen1 ); RotatePoint(rPol.aMainline1.aP2,aMainlinePt1,nLineSin,nLineCos);
rPol.aMainline2.aP1=aMainlinePt2; rPol.aMainline2.aP1.AdjustX(nLen2 ); RotatePoint(rPol.aMainline2.aP1,aMainlinePt2,nLineSin,nLineCos);
rPol.aMainline2.aP2=aMainlinePt2;
rPol.aMainline3.aP1=aMainlinePt1;
rPol.aMainline3.aP2=aMainlinePt2;
rPol.nMainlineCnt=3;
if (bBrkLine && rPol.eUsedTextHPos==css::drawing::MeasureTextHorzPos_INSIDE) rPol.nMainlineCnt=2;
}
}
basegfx::B2DPolyPolygon SdrMeasureObj::ImpCalcXPoly(const ImpMeasurePoly& rPol)
{
basegfx::B2DPolyPolygon aRetval;
basegfx::B2DPolygon aPartPolyA;
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline1.aP1.X(), rPol.aMainline1.aP1.Y()));
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline1.aP2.X(), rPol.aMainline1.aP2.Y()));
aRetval.append(aPartPolyA);
if(rPol.nMainlineCnt > 1)
{
aPartPolyA.clear();
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline2.aP1.X(), rPol.aMainline2.aP1.Y()));
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline2.aP2.X(), rPol.aMainline2.aP2.Y()));
aRetval.append(aPartPolyA);
}
if(rPol.nMainlineCnt > 2)
{
aPartPolyA.clear();
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline3.aP1.X(), rPol.aMainline3.aP1.Y()));
aPartPolyA.append(basegfx::B2DPoint(rPol.aMainline3.aP2.X(), rPol.aMainline3.aP2.Y()));
aRetval.append(aPartPolyA);
}
aPartPolyA.clear();
aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline1.aP1.X(), rPol.aHelpline1.aP1.Y()));
aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline1.aP2.X(), rPol.aHelpline1.aP2.Y()));
aRetval.append(aPartPolyA);
aPartPolyA.clear();
aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline2.aP1.X(), rPol.aHelpline2.aP1.Y()));
aPartPolyA.append(basegfx::B2DPoint(rPol.aHelpline2.aP2.X(), rPol.aHelpline2.aP2.Y()));
aRetval.append(aPartPolyA);
return aRetval;
}
bool SdrMeasureObj::CalcFieldValue(const SvxFieldItem& rField, sal_Int32 nPara, sal_uInt16 nPos,
bool bEdit,
o3tl::optional<Color>& rpTxtColor, o3tl::optional<Color>& rpFldColor, OUString& rRet) const
{
const SvxFieldData* pField=rField.GetField();
const SdrMeasureField* pMeasureField=dynamic_cast<const SdrMeasureField*>( pField );
if (pMeasureField!=nullptr) {
rRet = TakeRepresentation(pMeasureField->GetMeasureFieldKind());
if (rpFldColor && !bEdit)
{
rpFldColor.reset();
}
return true;
} else {
return SdrTextObj::CalcFieldValue(rField,nPara,nPos,bEdit,rpTxtColor,rpFldColor,rRet);
}
}
void SdrMeasureObj::UndirtyText() const
{
if (bTextDirty)
{
SdrOutliner& rOutliner=ImpGetDrawOutliner();
OutlinerParaObject* pOutlinerParaObject = SdrTextObj::GetOutlinerParaObject();
if(pOutlinerParaObject==nullptr)
{
rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Rotate90Blanks), EE_FEATURE_FIELD), ESelection(0,0));
rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Value), EE_FEATURE_FIELD),ESelection(0,1));
rOutliner.QuickInsertText(" ", ESelection(0,2));
rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Unit), EE_FEATURE_FIELD),ESelection(0,3));
rOutliner.QuickInsertField(SvxFieldItem(SdrMeasureField(SdrMeasureFieldKind::Rotate90Blanks), EE_FEATURE_FIELD),ESelection(0,4));
if(GetStyleSheet())
rOutliner.SetStyleSheet(0, GetStyleSheet());
rOutliner.SetParaAttribs(0, GetObjectItemSet());
// cast to nonconst
const_cast<SdrMeasureObj*>(this)->NbcSetOutlinerParaObject( rOutliner.CreateParaObject() );
}
else
{
rOutliner.SetText(*pOutlinerParaObject);
}
rOutliner.SetUpdateMode(true);
rOutliner.UpdateFields();
Size aSiz(rOutliner.CalcTextSize());
rOutliner.Clear();
// cast to nonconst three times
const_cast<SdrMeasureObj*>(this)->aTextSize=aSiz;
const_cast<SdrMeasureObj*>(this)->bTextSizeDirty=false;
const_cast<SdrMeasureObj*>(this)->bTextDirty=false;
}
}
void SdrMeasureObj::TakeUnrotatedSnapRect(tools::Rectangle& rRect) const
{
if (bTextDirty) UndirtyText();
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
ImpTakeAttr(aRec);
ImpCalcGeometrics(aRec,aMPol);
// determine TextSize including text frame margins
Size aTextSize2(aMPol.aTextSize);
if (aTextSize2.Width()<1) aTextSize2.setWidth(1 );
if (aTextSize2.Height()<1) aTextSize2.setHeight(1 );
aTextSize2.AdjustWidth(GetTextLeftDistance()+GetTextRightDistance() );
aTextSize2.AdjustHeight(GetTextUpperDistance()+GetTextLowerDistance() );
Point aPt1b(aMPol.aMainline1.aP1);
long nLen=aMPol.nLineLen;
long nLWdt=aMPol.nLineWdt2;
long nArr1Len=aMPol.nArrow1Len;
long nArr2Len=aMPol.nArrow2Len;
if (aMPol.bBreakedLine) {
// In the case of a dashed line and Outside, the text should be
// placed next to the line at the arrowhead instead of directly
// at the arrowhead.
nArr1Len=aMPol.nShortLineLen+aMPol.nArrow1Wdt/4;
nArr2Len=aMPol.nShortLineLen+aMPol.nArrow2Wdt/4;
}
Point aTextPos;
bool bRota90=aRec.bTextRota90;
bool bUpsideDown=aRec.bTextUpsideDown!=aMPol.bAutoUpsideDown;
bool bBelowRefEdge=aRec.bBelowRefEdge;
css::drawing::MeasureTextHorzPos eMH=aMPol.eUsedTextHPos;
css::drawing::MeasureTextVertPos eMV=aMPol.eUsedTextVPos;
if (!bRota90) {
switch (eMH) {
case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: aTextPos.setX(aPt1b.X()-aTextSize2.Width()-nArr1Len-nLWdt ); break;
case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: aTextPos.setX(aPt1b.X()+nLen+nArr2Len+nLWdt ); break;
default: aTextPos.setX(aPt1b.X() ); aTextSize2.setWidth(nLen );
}
switch (eMV) {
case css::drawing::MeasureTextVertPos_CENTERED:
aTextPos.setY(aPt1b.Y()-aTextSize2.Height()/2 ); break;
case css::drawing::MeasureTextVertPos_WEST: {
if (!bUpsideDown) aTextPos.setY(aPt1b.Y()+nLWdt );
else aTextPos.setY(aPt1b.Y()-aTextSize2.Height()-nLWdt );
} break;
default: {
if (!bUpsideDown) aTextPos.setY(aPt1b.Y()-aTextSize2.Height()-nLWdt );
else aTextPos.setY(aPt1b.Y()+nLWdt );
}
}
if (bUpsideDown) {
aTextPos.AdjustX(aTextSize2.Width() );
aTextPos.AdjustY(aTextSize2.Height() );
}
} else { // also if bTextRota90==TRUE
switch (eMH) {
case css::drawing::MeasureTextHorzPos_LEFTOUTSIDE: aTextPos.setX(aPt1b.X()-aTextSize2.Height()-nArr1Len ); break;
case css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE: aTextPos.setX(aPt1b.X()+nLen+nArr2Len ); break;
default: aTextPos.setX(aPt1b.X() ); aTextSize2.setHeight(nLen );
}
switch (eMV) {
case css::drawing::MeasureTextVertPos_CENTERED:
aTextPos.setY(aPt1b.Y()+aTextSize2.Width()/2 ); break;
case css::drawing::MeasureTextVertPos_WEST: {
if (!bBelowRefEdge) aTextPos.setY(aPt1b.Y()+aTextSize2.Width()+nLWdt );
else aTextPos.setY(aPt1b.Y()-nLWdt );
} break;
default: {
if (!bBelowRefEdge) aTextPos.setY(aPt1b.Y()-nLWdt );
else aTextPos.setY(aPt1b.Y()+aTextSize2.Width()+nLWdt );
}
}
if (bUpsideDown) {
aTextPos.AdjustX(aTextSize2.Height() );
aTextPos.AdjustY( -(aTextSize2.Width()) );
}
}
if (aMPol.nTextAngle!=aGeo.nRotationAngle) {
const_cast<SdrMeasureObj*>(this)->aGeo.nRotationAngle=aMPol.nTextAngle;
const_cast<SdrMeasureObj*>(this)->aGeo.RecalcSinCos();
}
RotatePoint(aTextPos,aPt1b,aMPol.nLineSin,aMPol.nLineCos);
aTextSize2.AdjustWidth( 1 ); aTextSize2.AdjustHeight( 1 ); // because of the Rect-Ctor's odd behavior
rRect=tools::Rectangle(aTextPos,aTextSize2);
rRect.Justify();
const_cast<SdrMeasureObj*>(this)->maRect=rRect;
if (aMPol.nTextAngle!=aGeo.nRotationAngle) {
const_cast<SdrMeasureObj*>(this)->aGeo.nRotationAngle=aMPol.nTextAngle;
const_cast<SdrMeasureObj*>(this)->aGeo.RecalcSinCos();
}
}
SdrMeasureObj* SdrMeasureObj::CloneSdrObject(SdrModel& rTargetModel) const
{
return CloneHelper< SdrMeasureObj >(rTargetModel);
}
SdrMeasureObj& SdrMeasureObj::operator=(const SdrMeasureObj& rObj)
{
if( this == &rObj )
return *this;
SdrTextObj::operator=(rObj);
aPt1 = rObj.aPt1;
aPt2 = rObj.aPt2;
bTextDirty = rObj.bTextDirty;
return *this;
}
OUString SdrMeasureObj::TakeObjNameSingul() const
{
OUStringBuffer sName(SvxResId(STR_ObjNameSingulMEASURE));
OUString aName( GetName() );
if (!aName.isEmpty())
{
sName.append(' ');
sName.append('\'');
sName.append(aName);
sName.append('\'');
}
return sName.makeStringAndClear();
}
OUString SdrMeasureObj::TakeObjNamePlural() const
{
return SvxResId(STR_ObjNamePluralMEASURE);
}
basegfx::B2DPolyPolygon SdrMeasureObj::TakeXorPoly() const
{
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
ImpTakeAttr(aRec);
ImpCalcGeometrics(aRec,aMPol);
return ImpCalcXPoly(aMPol);
}
sal_uInt32 SdrMeasureObj::GetHdlCount() const
{
return 6;
}
void SdrMeasureObj::AddToHdlList(SdrHdlList& rHdlList) const
{
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
ImpTakeAttr(aRec);
aRec.nHelplineDist=0;
ImpCalcGeometrics(aRec,aMPol);
for (sal_uInt32 nHdlNum=0; nHdlNum<6; ++nHdlNum)
{
Point aPt;
switch (nHdlNum) {
case 0: aPt=aMPol.aHelpline1.aP1; break;
case 1: aPt=aMPol.aHelpline2.aP1; break;
case 2: aPt=aPt1; break;
case 3: aPt=aPt2; break;
case 4: aPt=aMPol.aHelpline1.aP2; break;
case 5: aPt=aMPol.aHelpline2.aP2; break;
} // switch
std::unique_ptr<SdrHdl> pHdl(new ImpMeasureHdl(aPt,SdrHdlKind::User));
pHdl->SetObjHdlNum(nHdlNum);
pHdl->SetRotationAngle(aMPol.nLineAngle);
rHdlList.AddHdl(std::move(pHdl));
}
}
bool SdrMeasureObj::hasSpecialDrag() const
{
return true;
}
bool SdrMeasureObj::beginSpecialDrag(SdrDragStat& rDrag) const
{
const SdrHdl* pHdl = rDrag.GetHdl();
if(pHdl)
{
const sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
if(nHdlNum != 2 && nHdlNum != 3)
{
rDrag.SetEndDragChangesAttributes(true);
}
return true;
}
return false;
}
bool SdrMeasureObj::applySpecialDrag(SdrDragStat& rDrag)
{
ImpMeasureRec aMeasureRec;
const SdrHdl* pHdl = rDrag.GetHdl();
const sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
ImpTakeAttr(aMeasureRec);
ImpEvalDrag(aMeasureRec, rDrag);
switch (nHdlNum)
{
case 2:
{
aPt1 = aMeasureRec.aPt1;
SetTextDirty();
break;
}
case 3:
{
aPt2 = aMeasureRec.aPt2;
SetTextDirty();
break;
}
default:
{
switch(nHdlNum)
{
case 0:
case 1:
{
ImpMeasureRec aOrigMeasureRec;
ImpTakeAttr(aOrigMeasureRec);
if(aMeasureRec.nHelpline1Len != aOrigMeasureRec.nHelpline1Len)
{
SetObjectItem(makeSdrMeasureHelpline1LenItem(aMeasureRec.nHelpline1Len));
}
if(aMeasureRec.nHelpline2Len != aOrigMeasureRec.nHelpline2Len)
{
SetObjectItem(makeSdrMeasureHelpline2LenItem(aMeasureRec.nHelpline2Len));
}
break;
}
case 4:
case 5:
{
ImpMeasureRec aOrigMeasureRec;
ImpTakeAttr(aOrigMeasureRec);
if(aMeasureRec.nLineDist != aOrigMeasureRec.nLineDist)
{
SetObjectItem(makeSdrMeasureLineDistItem(aMeasureRec.nLineDist));
}
if(aMeasureRec.bBelowRefEdge != aOrigMeasureRec.bBelowRefEdge)
{
SetObjectItem(SdrMeasureBelowRefEdgeItem(aMeasureRec.bBelowRefEdge));
}
}
}
}
} // switch
SetRectsDirty();
SetChanged();
return true;
}
OUString SdrMeasureObj::getSpecialDragComment(const SdrDragStat& /*rDrag*/) const
{
return OUString();
}
void SdrMeasureObj::ImpEvalDrag(ImpMeasureRec& rRec, const SdrDragStat& rDrag) const
{
long nLineAngle=GetAngle(rRec.aPt2-rRec.aPt1);
double a = nLineAngle * F_PI18000;
double nSin=sin(a);
double nCos=cos(a);
const SdrHdl* pHdl=rDrag.GetHdl();
sal_uInt32 nHdlNum(pHdl->GetObjHdlNum());
bool bOrtho=rDrag.GetView()!=nullptr && rDrag.GetView()->IsOrtho();
bool bBigOrtho=bOrtho && rDrag.GetView()->IsBigOrtho();
bool bBelow=rRec.bBelowRefEdge;
Point aPt(rDrag.GetNow());
switch (nHdlNum) {
case 0: {
RotatePoint(aPt,aPt1,nSin,-nCos);
rRec.nHelpline1Len=aPt1.Y()-aPt.Y();
if (bBelow) rRec.nHelpline1Len=-rRec.nHelpline1Len;
if (bOrtho) rRec.nHelpline2Len=rRec.nHelpline1Len;
} break;
case 1: {
RotatePoint(aPt,aPt2,nSin,-nCos);
rRec.nHelpline2Len=aPt2.Y()-aPt.Y();
if (bBelow) rRec.nHelpline2Len=-rRec.nHelpline2Len;
if (bOrtho) rRec.nHelpline1Len=rRec.nHelpline2Len;
} break;
case 2: case 3: {
bool bAnf=nHdlNum==2;
Point& rMov=bAnf ? rRec.aPt1 : rRec.aPt2;
Point aMov(rMov);
Point aFix(bAnf ? rRec.aPt2 : rRec.aPt1);
if (bOrtho) {
long ndx0=aMov.X()-aFix.X();
long ndy0=aMov.Y()-aFix.Y();
bool bHLin=ndy0==0;
bool bVLin=ndx0==0;
if (!bHLin || !bVLin) { // else aPt1==aPt2
long ndx=aPt.X()-aFix.X();
long ndy=aPt.Y()-aFix.Y();
double nXFact=0; if (!bVLin) nXFact=static_cast<double>(ndx)/static_cast<double>(ndx0);
double nYFact=0; if (!bHLin) nYFact=static_cast<double>(ndy)/static_cast<double>(ndy0);
bool bHor=bHLin || (!bVLin && (nXFact>nYFact) ==bBigOrtho);
bool bVer=bVLin || (!bHLin && (nXFact<=nYFact)==bBigOrtho);
if (bHor) ndy=long(ndy0*nXFact);
if (bVer) ndx=long(ndx0*nYFact);
aPt=aFix;
aPt.AdjustX(ndx );
aPt.AdjustY(ndy );
} // else Ortho8
}
rMov=aPt;
} break;
case 4: case 5: {
long nVal0=rRec.nLineDist;
RotatePoint(aPt,(nHdlNum==4 ? aPt1 : aPt2),nSin,-nCos);
rRec.nLineDist=aPt.Y()- (nHdlNum==4 ? aPt1.Y() : aPt2.Y());
if (bBelow) rRec.nLineDist=-rRec.nLineDist;
if (rRec.nLineDist<0) {
rRec.nLineDist=-rRec.nLineDist;
rRec.bBelowRefEdge=!bBelow;
}
rRec.nLineDist-=rRec.nHelplineOverhang;
if (bOrtho) rRec.nLineDist=nVal0;
} break;
} // switch
}
bool SdrMeasureObj::BegCreate(SdrDragStat& rStat)
{
rStat.SetOrtho8Possible();
aPt1=rStat.GetStart();
aPt2=rStat.GetNow();
SetTextDirty();
return true;
}
bool SdrMeasureObj::MovCreate(SdrDragStat& rStat)
{
SdrView* pView=rStat.GetView();
aPt1=rStat.GetStart();
aPt2=rStat.GetNow();
if (pView!=nullptr && pView->IsCreate1stPointAsCenter()) {
aPt1+=aPt1;
aPt1-=rStat.GetNow();
}
SetTextDirty();
SetBoundRectDirty();
bSnapRectDirty=true;
return true;
}
bool SdrMeasureObj::EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd)
{
SetTextDirty();
SetRectsDirty();
return (eCmd==SdrCreateCmd::ForceEnd || rStat.GetPointCount()>=2);
}
bool SdrMeasureObj::BckCreate(SdrDragStat& /*rStat*/)
{
return false;
}
void SdrMeasureObj::BrkCreate(SdrDragStat& /*rStat*/)
{
}
basegfx::B2DPolyPolygon SdrMeasureObj::TakeCreatePoly(const SdrDragStat& /*rDrag*/) const
{
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
ImpTakeAttr(aRec);
ImpCalcGeometrics(aRec, aMPol);
return ImpCalcXPoly(aMPol);
}
PointerStyle SdrMeasureObj::GetCreatePointer() const
{
return PointerStyle::Cross;
}
void SdrMeasureObj::NbcMove(const Size& rSiz)
{
SdrTextObj::NbcMove(rSiz);
aPt1.Move(rSiz);
aPt2.Move(rSiz);
}
void SdrMeasureObj::NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact)
{
SdrTextObj::NbcResize(rRef,xFact,yFact);
ResizePoint(aPt1,rRef,xFact,yFact);
ResizePoint(aPt2,rRef,xFact,yFact);
SetTextDirty();
}
void SdrMeasureObj::NbcRotate(const Point& rRef, long nAngle, double sn, double cs)
{
SdrTextObj::NbcRotate(rRef,nAngle,sn,cs);
long nLen0=GetLen(aPt2-aPt1);
RotatePoint(aPt1,rRef,sn,cs);
RotatePoint(aPt2,rRef,sn,cs);
long nLen1=GetLen(aPt2-aPt1);
if (nLen1!=nLen0) { // rounding error!
long dx=aPt2.X()-aPt1.X();
long dy=aPt2.Y()-aPt1.Y();
dx=BigMulDiv(dx,nLen0,nLen1);
dy=BigMulDiv(dy,nLen0,nLen1);
if (rRef==aPt2) {
aPt1.setX(aPt2.X()-dx );
aPt1.setY(aPt2.Y()-dy );
} else {
aPt2.setX(aPt1.X()+dx );
aPt2.setY(aPt1.Y()+dy );
}
}
SetRectsDirty();
}
void SdrMeasureObj::NbcMirror(const Point& rRef1, const Point& rRef2)
{
SdrTextObj::NbcMirror(rRef1,rRef2);
MirrorPoint(aPt1,rRef1,rRef2);
MirrorPoint(aPt2,rRef1,rRef2);
SetRectsDirty();
}
void SdrMeasureObj::NbcShear(const Point& rRef, long nAngle, double tn, bool bVShear)
{
SdrTextObj::NbcShear(rRef,nAngle,tn,bVShear);
ShearPoint(aPt1,rRef,tn,bVShear);
ShearPoint(aPt2,rRef,tn,bVShear);
SetRectsDirty();
SetTextDirty();
}
long SdrMeasureObj::GetRotateAngle() const
{
return GetAngle(aPt2-aPt1);
}
void SdrMeasureObj::RecalcSnapRect()
{
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
XPolyPolygon aXPP;
ImpTakeAttr(aRec);
ImpCalcGeometrics(aRec, aMPol);
aXPP = XPolyPolygon(ImpCalcXPoly(aMPol));
maSnapRect = aXPP.GetBoundRect();
}
sal_uInt32 SdrMeasureObj::GetSnapPointCount() const
{
return 2;
}
Point SdrMeasureObj::GetSnapPoint(sal_uInt32 i) const
{
if (i==0) return aPt1;
else return aPt2;
}
bool SdrMeasureObj::IsPolyObj() const
{
return true;
}
sal_uInt32 SdrMeasureObj::GetPointCount() const
{
return 2;
}
Point SdrMeasureObj::GetPoint(sal_uInt32 i) const
{
return (0 == i) ? aPt1 : aPt2;
}
void SdrMeasureObj::NbcSetPoint(const Point& rPnt, sal_uInt32 i)
{
if (0 == i)
aPt1=rPnt;
if (1 == i)
aPt2=rPnt;
SetRectsDirty();
SetTextDirty();
}
SdrObjGeoData* SdrMeasureObj::NewGeoData() const
{
return new SdrMeasureObjGeoData;
}
void SdrMeasureObj::SaveGeoData(SdrObjGeoData& rGeo) const
{
SdrTextObj::SaveGeoData(rGeo);
SdrMeasureObjGeoData& rMGeo=static_cast<SdrMeasureObjGeoData&>(rGeo);
rMGeo.aPt1=aPt1;
rMGeo.aPt2=aPt2;
}
void SdrMeasureObj::RestGeoData(const SdrObjGeoData& rGeo)
{
SdrTextObj::RestGeoData(rGeo);
const SdrMeasureObjGeoData& rMGeo=static_cast<const SdrMeasureObjGeoData&>(rGeo);
aPt1=rMGeo.aPt1;
aPt2=rMGeo.aPt2;
SetTextDirty();
}
SdrObjectUniquePtr SdrMeasureObj::DoConvertToPolyObj(bool bBezier, bool bAddText) const
{
// get XOR Poly as base
XPolyPolygon aTmpPolyPolygon(TakeXorPoly());
// get local ItemSet and StyleSheet
SfxItemSet aSet(GetObjectItemSet());
SfxStyleSheet* pStyleSheet = GetStyleSheet();
// prepare group
std::unique_ptr<SdrObjGroup,SdrObjectFreeOp> pGroup(new SdrObjGroup(getSdrModelFromSdrObject()));
// prepare parameters
basegfx::B2DPolyPolygon aPolyPoly;
SdrPathObj* pPath;
sal_uInt16 nCount(aTmpPolyPolygon.Count());
sal_uInt16 nLoopStart(0);
if(nCount == 3)
{
// three lines, first one is the middle one
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
aSet.Put(XLineStartWidthItem(0));
aSet.Put(XLineEndWidthItem(0));
nLoopStart = 1;
}
else if(nCount == 4)
{
// four lines, middle line with gap, so there are two lines used
// which have one arrow each
sal_Int32 nEndWidth = aSet.Get(XATTR_LINEENDWIDTH).GetValue();
aSet.Put(XLineEndWidthItem(0));
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
aSet.Put(XLineEndWidthItem(nEndWidth));
aSet.Put(XLineStartWidthItem(0));
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[1].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
aSet.Put(XLineEndWidthItem(0));
nLoopStart = 2;
}
else if(nCount == 5)
{
// five lines, first two are the outer ones
sal_Int32 nEndWidth = aSet.Get(XATTR_LINEENDWIDTH).GetValue();
aSet.Put(XLineEndWidthItem(0));
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[0].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
aSet.Put(XLineEndWidthItem(nEndWidth));
aSet.Put(XLineStartWidthItem(0));
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[1].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
aSet.Put(XLineEndWidthItem(0));
nLoopStart = 2;
}
for(;nLoopStart<nCount;nLoopStart++)
{
aPolyPoly.clear();
aPolyPoly.append(aTmpPolyPolygon[nLoopStart].getB2DPolygon());
pPath = new SdrPathObj(
getSdrModelFromSdrObject(),
OBJ_PATHLINE,
aPolyPoly);
pPath->SetMergedItemSet(aSet);
pPath->SetStyleSheet(pStyleSheet, true);
pGroup->GetSubList()->NbcInsertObject(pPath);
}
if(bAddText)
{
return ImpConvertAddText(std::move(pGroup), bBezier);
}
else
{
return pGroup;
}
}
bool SdrMeasureObj::BegTextEdit(SdrOutliner& rOutl)
{
UndirtyText();
return SdrTextObj::BegTextEdit(rOutl);
}
const Size& SdrMeasureObj::GetTextSize() const
{
if (bTextDirty) UndirtyText();
return SdrTextObj::GetTextSize();
}
OutlinerParaObject* SdrMeasureObj::GetOutlinerParaObject() const
{
if(bTextDirty)
UndirtyText();
return SdrTextObj::GetOutlinerParaObject();
}
void SdrMeasureObj::NbcSetOutlinerParaObject(std::unique_ptr<OutlinerParaObject> pTextObject)
{
SdrTextObj::NbcSetOutlinerParaObject(std::move(pTextObject));
if(SdrTextObj::GetOutlinerParaObject())
SetTextDirty(); // recalculate text
}
void SdrMeasureObj::TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText,
tools::Rectangle* pAnchorRect, bool bLineWidth ) const
{
if (bTextDirty) UndirtyText();
SdrTextObj::TakeTextRect( rOutliner, rTextRect, bNoEditText, pAnchorRect, bLineWidth );
}
void SdrMeasureObj::TakeTextAnchorRect(tools::Rectangle& rAnchorRect) const
{
if (bTextDirty) UndirtyText();
SdrTextObj::TakeTextAnchorRect(rAnchorRect);
}
void SdrMeasureObj::TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const
{
if (bTextDirty) UndirtyText();
SdrTextObj::TakeTextEditArea(pPaperMin,pPaperMax,pViewInit,pViewMin);
}
EEAnchorMode SdrMeasureObj::GetOutlinerViewAnchorMode() const
{
if (bTextDirty) UndirtyText();
ImpMeasureRec aRec;
ImpMeasurePoly aMPol;
ImpTakeAttr(aRec);
ImpCalcGeometrics(aRec,aMPol);
SdrTextHorzAdjust eTH=GetTextHorizontalAdjust();
SdrTextVertAdjust eTV=GetTextVerticalAdjust();
css::drawing::MeasureTextHorzPos eMH = aMPol.eUsedTextHPos;
css::drawing::MeasureTextVertPos eMV = aMPol.eUsedTextVPos;
bool bTextRota90=aRec.bTextRota90;
bool bBelowRefEdge=aRec.bBelowRefEdge;
// TODO: bTextUpsideDown should be interpreted here!
if (!bTextRota90) {
if (eMH==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) eTH=SDRTEXTHORZADJUST_RIGHT;
if (eMH==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) eTH=SDRTEXTHORZADJUST_LEFT;
// at eMH==css::drawing::MeasureTextHorzPos_INSIDE we can anchor horizontally
if (eMV==css::drawing::MeasureTextVertPos_EAST) eTV=SDRTEXTVERTADJUST_BOTTOM;
if (eMV==css::drawing::MeasureTextVertPos_WEST) eTV=SDRTEXTVERTADJUST_TOP;
if (eMV==css::drawing::MeasureTextVertPos_CENTERED) eTV=SDRTEXTVERTADJUST_CENTER;
} else {
if (eMH==css::drawing::MeasureTextHorzPos_LEFTOUTSIDE) eTV=SDRTEXTVERTADJUST_BOTTOM;
if (eMH==css::drawing::MeasureTextHorzPos_RIGHTOUTSIDE) eTV=SDRTEXTVERTADJUST_TOP;
// at eMH==css::drawing::MeasureTextHorzPos_INSIDE we can anchor vertically
if (!bBelowRefEdge) {
if (eMV==css::drawing::MeasureTextVertPos_EAST) eTH=SDRTEXTHORZADJUST_LEFT;
if (eMV==css::drawing::MeasureTextVertPos_WEST) eTH=SDRTEXTHORZADJUST_RIGHT;
} else {
if (eMV==css::drawing::MeasureTextVertPos_EAST) eTH=SDRTEXTHORZADJUST_RIGHT;
if (eMV==css::drawing::MeasureTextVertPos_WEST) eTH=SDRTEXTHORZADJUST_LEFT;
}
if (eMV==css::drawing::MeasureTextVertPos_CENTERED) eTH=SDRTEXTHORZADJUST_CENTER;
}
EEAnchorMode eRet=EEAnchorMode::BottomHCenter;
if (eTH==SDRTEXTHORZADJUST_LEFT) {
if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopLeft;
else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomLeft;
else eRet=EEAnchorMode::VCenterLeft;
} else if (eTH==SDRTEXTHORZADJUST_RIGHT) {
if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopRight;
else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomRight;
else eRet=EEAnchorMode::VCenterRight;
} else {
if (eTV==SDRTEXTVERTADJUST_TOP) eRet=EEAnchorMode::TopHCenter;
else if (eTV==SDRTEXTVERTADJUST_BOTTOM) eRet=EEAnchorMode::BottomHCenter;
else eRet=EEAnchorMode::VCenterHCenter;
}
return eRet;
}
// #i97878#
// TRGetBaseGeometry/TRSetBaseGeometry needs to be based on two positions,
// same as line geometry in SdrPathObj. Thus needs to be overridden and
// implemented since currently it is derived from SdrTextObj which uses
// a functionality based on SnapRect which is not useful here
bool SdrMeasureObj::TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& /*rPolyPolygon*/) const
{
// handle the same as a simple line since the definition is based on two points
const basegfx::B2DRange aRange(aPt1.X(), aPt1.Y(), aPt2.X(), aPt2.Y());
basegfx::B2DTuple aScale(aRange.getRange());
basegfx::B2DTuple aTranslate(aRange.getMinimum());
// position maybe relative to anchor position, convert
if( getSdrModelFromSdrObject().IsWriter() )
{
if(GetAnchorPos().X() || GetAnchorPos().Y())
{
aTranslate -= basegfx::B2DTuple(GetAnchorPos().X(), GetAnchorPos().Y());
}
}
// build return value matrix
rMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix(aScale, aTranslate);
return true;
}
void SdrMeasureObj::TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& /*rPolyPolygon*/)
{
// use given transformation to derive the two defining points from unit line
basegfx::B2DPoint aPosA(rMatrix * basegfx::B2DPoint(0.0, 0.0));
basegfx::B2DPoint aPosB(rMatrix * basegfx::B2DPoint(1.0, 0.0));
if( getSdrModelFromSdrObject().IsWriter() )
{
// if anchor is used, make position relative to it
if(GetAnchorPos().X() || GetAnchorPos().Y())
{
const basegfx::B2DVector aAnchorOffset(GetAnchorPos().X(), GetAnchorPos().Y());
aPosA += aAnchorOffset;
aPosB += aAnchorOffset;
}
}
// derive new model data
const Point aNewPt1(basegfx::fround(aPosA.getX()), basegfx::fround(aPosA.getY()));
const Point aNewPt2(basegfx::fround(aPosB.getX()), basegfx::fround(aPosB.getY()));
if(aNewPt1 != aPt1 || aNewPt2 != aPt2)
{
// set model values and broadcast
tools::Rectangle aBoundRect0; if (pUserCall!=nullptr) aBoundRect0=GetLastBoundRect();
aPt1 = aNewPt1;
aPt2 = aNewPt2;
SetTextDirty();
ActionChanged();
SetChanged();
BroadcastObjectChange();
SendUserCall(SdrUserCallType::MoveOnly,aBoundRect0);
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */