office-gobmx/sd/source/ui/view/outlview.cxx
Oliver Bolte b806d323e0 INTEGRATION: CWS fwk22 (1.35.102); FILE MERGED
2005/08/12 09:53:56 cl 1.35.102.1: #i53165# guard paragraph insert hdl against model changes
2005-08-12 15:25:41 +00:00

2156 lines
69 KiB
C++

/*************************************************************************
*
* $RCSfile: outlview.cxx,v $
*
* $Revision: 1.36 $
*
* last change: $Author: obo $ $Date: 2005-08-12 16:25:41 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#include "OutlineView.hxx"
#ifndef _FORBIDDENCHARACTERSTABLE_HXX
#include <svx/forbiddencharacterstable.hxx>
#endif
#ifndef _SFX_PROGRESS_HXX
#include <sfx2/progress.hxx>
#endif
#ifndef _SV_WRKWIN_HXX
#include <vcl/wrkwin.hxx>
#endif
#ifndef _SVXIDS_HRC
#include <svx/svxids.hrc>
#endif
#include "eetext.hxx" // definiert ITEMID_... fuer frmitems und textitem
#ifndef _EEITEM_HXX
#include <svx/eeitem.hxx>
#endif
#ifndef _EDITSTAT_HXX
#include <svx/editstat.hxx>
#endif
#ifndef _LRSPITEM_HXX
#include <svx/lrspitem.hxx>
#endif
#ifndef _SVDOTEXT_HXX //autogen
#include <svx/svdotext.hxx>
#endif
#ifndef _SFX_PRINTER_HXX //autogen
#include <sfx2/printer.hxx>
#endif
#ifndef _SFXAPP_HXX //autogen
#include <sfx2/app.hxx>
#endif
#ifndef _BINDINGS_HXX //autogen
#include <sfx2/bindings.hxx>
#endif
#ifndef _SFXITEMPOOL_HXX //autogen
#include <svtools/itempool.hxx>
#endif
#ifndef _SFXSTYLE_HXX //autogen
#include <svtools/style.hxx>
#endif
#ifndef _SVDORECT_HXX //autogen
#include <svx/svdorect.hxx>
#endif
#ifndef _SVDUNDO_HXX //autogen
#include <svx/svdundo.hxx>
#endif
#ifndef _SFXBRDCST_HXX //autogen
#include <svtools/brdcst.hxx>
#endif
#ifndef _SV_MSGBOX_HXX //autogen
#include <vcl/msgbox.hxx>
#endif
#ifndef _SVX_ADJITEM_HXX
#include <svx/adjitem.hxx>
#endif
#ifndef _SVX_TSPTITEM_HXX
#include <svx/tstpitem.hxx>
#endif
#ifndef _SVX_LSPCITEM_HXX
#include <svx/lspcitem.hxx>
#endif
#ifndef _SVX_NUMITEM_HXX
#include <svx/numitem.hxx>
#endif
#ifndef _OUTLOBJ_HXX //autogen
#include <svx/outlobj.hxx>
#endif
#ifndef _SVX_NUMITEM_HXX
#include <svx/numitem.hxx>
#endif
// #97766#
#ifndef _EDITOBJ_HXX
#include <svx/editobj.hxx>
#endif
#pragma hdrstop
#include "DrawDocShell.hxx"
#include "drawdoc.hxx"
#ifndef SD_WINDOW_HXX
#include "Window.hxx"
#endif
#include "sdpage.hxx"
#include "pres.hxx"
#ifndef SD_OUTLINE_VIEW_SHELL_HXX
#include "OutlineViewShell.hxx"
#endif
#include "app.hrc"
#include "glob.hrc"
#include "sdresid.hxx"
#ifndef SD_OUTLINER_HXX
#include "Outliner.hxx"
#endif
#include "strings.hrc"
#include "EventMultiplexer.hxx"
#include "ViewShellBase.hxx"
namespace sd {
#pragma code_seg("STATICS")
static USHORT SidArray[] = {
SID_OUTLINE_UP,
SID_OUTLINE_DOWN,
SID_OUTLINE_LEFT,
SID_OUTLINE_RIGHT,
SID_OUTLINE_COLLAPSE_ALL,
SID_OUTLINE_COLLAPSE,
SID_OUTLINE_EXPAND_ALL,
SID_OUTLINE_EXPAND,
0 };
#pragma code_seg()
// Breite: DIN A 4, zwei Raender zu je 1 cm
#define OUTLINE_PAPERWIDTH 19000
// beim Seitenmanipulation Fortschrittsanzeige, wenn mehr Seiten betroffen
// sind als:
#define PROCESS_WITH_PROGRESS_THRESHOLD 5
struct SdParaAndPos
{
Paragraph* pPara;
USHORT nPos;
};
TYPEINIT1( OutlineView, ::sd::View );
/*************************************************************************
|*
|* Konstruktor
|*
\************************************************************************/
OutlineView::OutlineView (
DrawDocShell* pDocSh,
::Window* pWindow,
OutlineViewShell* pOutlineViewSh)
: ::sd::View(pDocSh->GetDoc(), pWindow, pOutlineViewSh),
pOutlineViewShell(pOutlineViewSh),
pOutliner( pDoc->GetOutliner(TRUE) ),
pOldParaOrder(NULL),
pSelectedParas(NULL),
bFirstPaint(TRUE),
nPagesToProcess(0),
nPagesProcessed(0),
mbHighContrastMode( false ),
maDocColor( COL_WHITE ),
mpProgress(NULL),
mnIgnoreCurrentPageChangesLevel(0)
{
BOOL bInitOutliner = FALSE;
if (pOutliner->GetViewCount() == 0)
{
// Outliner initialisieren: Referenz-Device setzen
bInitOutliner = TRUE;
pOutliner->Init( OUTLINERMODE_OUTLINEVIEW );
SfxStyleSheet* pTitleSheet = pDoc->GetSdPage( 0, PK_STANDARD )->GetStyleSheetForPresObj( PRESOBJ_TITLE );
if ( pTitleSheet )
{
// set title symbol (level 0)
SvxNumBulletItem aNumBulletItem( (const SvxNumBulletItem&) pTitleSheet->GetItemSet().Get(EE_PARA_NUMBULLET) );
SvxNumRule aNumRule(* aNumBulletItem.GetNumRule());
SvxNumberFormat aFormat( aNumRule.GetLevel(0));
Font aBulletFont;
const Font* pFont = aFormat.GetBulletFont();
if ( pFont ) // if available take font size and color from style
aBulletFont = *pFont;
else
{
aBulletFont.SetColor( COL_AUTO );
aBulletFont.SetHeight( 1552 );
}
aBulletFont.SetCharSet(RTL_TEXTENCODING_MS_1252); // and replacing other values by standard
aBulletFont.SetName( String( RTL_CONSTASCII_USTRINGPARAM( "StarSymbol" )) );
aBulletFont.SetWeight(WEIGHT_NORMAL);
aBulletFont.SetUnderline(UNDERLINE_NONE);
aBulletFont.SetStrikeout(STRIKEOUT_NONE);
aBulletFont.SetItalic(ITALIC_NONE);
aBulletFont.SetOutline(FALSE);
aBulletFont.SetShadow(FALSE);
aFormat.SetBulletFont( &aBulletFont );
aFormat.SetBulletChar( 0xE011 ); // StarBats: 0xF000 + 114
pOutliner->OverwriteLevel0Bullet( aFormat );
}
pOutliner->SetRefDevice( SD_MOD()->GetRefDevice( *pDocSh ) );
ULONG nWidth = OUTLINE_PAPERWIDTH;
pOutliner->SetPaperSize(Size(nWidth, 4000000000));
}
// View in Outliner einfuegen
for (USHORT nView = 0; nView < MAX_OUTLINERVIEWS; nView++)
{
pOutlinerView[nView] = NULL;
}
pOutlinerView[0] = new OutlinerView(pOutliner, pWindow);
Rectangle aNullRect;
pOutlinerView[0]->SetOutputArea(aNullRect);
pOutliner->SetUpdateMode(FALSE);
pOutliner->InsertView(pOutlinerView[0], LIST_APPEND);
onUpdateStyleSettings( true );
if (bInitOutliner)
{
// Outliner mit Inhalt fuellen
FillOutliner();
}
Link aLink( LINK(this,OutlineView,EventMultiplexerListener) );
pOutlineViewShell->GetViewShellBase().GetEventMultiplexer().AddEventListener( aLink,
tools::EventMultiplexer::ET_CURRENT_PAGE
| tools::EventMultiplexer::ET_PAGE_ORDER);
}
/*************************************************************************
|*
|* Destruktor, Links restaurieren, Outliner leeren
|*
\************************************************************************/
OutlineView::~OutlineView()
{
Link aLink( LINK(this,OutlineView,EventMultiplexerListener) );
pOutlineViewShell->GetViewShellBase().GetEventMultiplexer().RemoveEventListener( aLink );
DisconnectFromApplication();
if( mpProgress )
delete mpProgress;
// OutlinerViews abmelden und zerstoeren
for (USHORT nView = 0; nView < MAX_OUTLINERVIEWS; nView++)
{
if (pOutlinerView[nView] != NULL)
{
pOutliner->RemoveView( pOutlinerView[nView] );
delete pOutlinerView[nView];
pOutlinerView[nView] = NULL;
}
}
if (pOutliner->GetViewCount() == 0)
{
// Outliner deinitialisieren: Farbdarstellung einschalten
ResetLinks();
ULONG nCntrl = pOutliner->GetControlWord();
pOutliner->SetUpdateMode(FALSE); // sonst wird bei SetControlWord gezeichnet
pOutliner->SetControlWord(nCntrl & ~EE_CNTRL_NOCOLORS);
SvtAccessibilityOptions aOptions;
pOutliner->ForceAutoColor( aOptions.GetIsAutomaticFontColor() );
pOutliner->Clear();
}
DBG_ASSERT(!pSelectedParas, "Absatzliste nicht geloescht");
DBG_ASSERT(!pOldParaOrder, "Absatzliste nicht geloescht");
}
void OutlineView::ConnectToApplication (void)
{
pOutlineViewShell->GetActiveWindow()->GrabFocus();
Application::AddEventListener(LINK(this, OutlineView, AppEventListenerHdl));
}
void OutlineView::DisconnectFromApplication (void)
{
Application::RemoveEventListener(LINK(this, OutlineView, AppEventListenerHdl));
}
/*************************************************************************
|*
|* Paint-Methode
|*
\************************************************************************/
void OutlineView::Paint(const Rectangle& rRect, ::sd::Window* pWin)
{
OutlinerView* pOlView = GetViewByWindow(pWin);
if (pOlView)
{
pOlView->HideCursor();
pOlView->Paint(rRect);
pOlView->ShowCursor(bFirstPaint);
bFirstPaint = FALSE;
}
}
/*************************************************************************
|*
|* Fenster-Groesse hat sich geaendert
|*
\************************************************************************/
void OutlineView::AdjustPosSizePixel(
const Point &rNewPos,
const Size &rNewSize,
::sd::Window* pWindow)
{
}
/*************************************************************************
|*
|* ein Fenster hinzufuegen
|*
\************************************************************************/
void OutlineView::AddWin (::sd::Window* pWin)
{
BOOL bAdded = FALSE;
BOOL bValidArea = FALSE;
Rectangle aOutputArea;
const Color aWhiteColor( COL_WHITE );
USHORT nView = 0;
while (nView < MAX_OUTLINERVIEWS && !bAdded)
{
if (pOutlinerView[nView] == NULL)
{
pOutlinerView[nView] = new OutlinerView(pOutliner, pWin);
pOutlinerView[nView]->SetBackgroundColor( aWhiteColor );
pOutliner->InsertView(pOutlinerView[nView], LIST_APPEND);
bAdded = TRUE;
if (bValidArea)
{
pOutlinerView[nView]->SetOutputArea(aOutputArea);
}
}
else if (!bValidArea)
{
aOutputArea = pOutlinerView[nView]->GetOutputArea();
bValidArea = TRUE;
}
nView++;
}
// weisser Hintergrund im Outliner
pWin->SetBackground( Wallpaper( aWhiteColor ) );
::sd::View::AddWin(pWin);
}
/*************************************************************************
|*
|* ein Fenster entfernen
|*
\************************************************************************/
void OutlineView::DelWin (::sd::Window* pWin)
{
BOOL bRemoved = FALSE;
USHORT nView = 0;
::Window* pWindow;
while (nView < MAX_OUTLINERVIEWS && !bRemoved)
{
if (pOutlinerView[nView] != NULL)
{
pWindow = pOutlinerView[nView]->GetWindow();
if (pWindow == pWin)
{
pOutliner->RemoveView( pOutlinerView[nView] );
delete pOutlinerView[nView];
pOutlinerView[nView] = NULL;
bRemoved = TRUE;
}
}
nView++;
}
::sd::View::DelWin(pWin);
}
/*************************************************************************
|*
|* Zeiger der dem Fenster entsprechenden OutlinerView zurueckgeben.
|*
\************************************************************************/
OutlinerView* OutlineView::GetViewByWindow (::Window* pWin) const
{
OutlinerView* pOlView = NULL;
for (USHORT nView = 0; nView < MAX_OUTLINERVIEWS; nView++)
{
if (pOutlinerView[nView] != NULL)
{
if ( pWin == pOutlinerView[nView]->GetWindow() )
{
pOlView = pOutlinerView[nView];
}
}
}
return (pOlView);
}
/*************************************************************************
|*
|* Ermittelt den Titel vor einem beliebigen Absatz.
|*
\************************************************************************/
Paragraph* OutlineView::GetPrevTitle(const Paragraph* pPara)
{
Paragraph* pResult = NULL;
ULONG nPos = pOutliner->GetAbsPos((Paragraph*)pPara);
if (nPos > 0)
{
while (nPos && !pResult)
{
pPara = pOutliner->GetParagraph(--nPos);
if ( pOutliner->GetDepth( (USHORT) nPos ) == 0 )
{
pResult = (Paragraph*)pPara;
}
}
}
return pResult;
}
/*************************************************************************
|*
|* Ermittelt den Titel nach einem beliebigen Absatz.
|*
\************************************************************************/
Paragraph* OutlineView::GetNextTitle(const Paragraph* pPara)
{
ULONG nPos = pOutliner->GetAbsPos((Paragraph*)pPara);
Paragraph* pResult = (Paragraph*)pPara;
do
{
pResult = pOutliner->GetParagraph(++nPos);
}
while (pResult && pOutliner->GetDepth( (USHORT) nPos ) != 0);
if (pResult && pOutliner->GetDepth( (USHORT) nPos ) != 0)
{
pResult = NULL;
}
return pResult;
}
/*************************************************************************
|*
|* Handler fuer das Einfuegen von Seiten (Absaetzen)
|*
\************************************************************************/
IMPL_LINK( OutlineView, ParagraphInsertedHdl, ::Outliner *, pOutliner )
{
OutlineViewPageChangesGuard aGuard(this);
Paragraph* pPara = pOutliner->GetHdlParagraph();
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) == 0 )
{
// wieviele Titel sind vor dem neuen Titelabsatz?
ULONG nExample = 0L; // Position der "Vorbild"seite
ULONG nTarget = 0L; // Einfuegeposition
while(pPara)
{
pPara = GetPrevTitle(pPara);
if (pPara)
nTarget++;
}
// was der Outliner nicht kann, muss hier wieder wettgemacht werden:
// wenn VOR dem ersten Absatz ein neuer Absatz mit RETURN erzeugt wird,
// meldet der Outliner den bereits bestehenden (jetzt nach unten
// gerutschten) Absatz als neuen Absatz; nicht darauf reinfallen!
if (nTarget == 1)
{
String aTest(pOutliner->GetText( pOutliner->GetParagraph( 0 ) ));
if (aTest.Len() == 0)
{
nTarget = 0;
}
}
// "Vorbild"seite ist - wenn vorhanden - die Vorgaengerseite
if (nTarget > 0)
{
nExample = nTarget - 1;
}
// #96090# added string to create no empty UNDO actions (in ListBox)
BegUndo( String( SdResId(STR_INSERTPAGE) ) );
/**********************************************************************
* Es wird stets zuerst eine Standardseite und dann eine
* Notizseite erzeugt. Es ist sichergestellt, dass auf eine
* Standardseite stets die zugehoerige Notizseite folgt.
* Vorangestellt ist genau eine Handzettelseite
**********************************************************************/
// diese Seite hat Vorbildfunktion
SdPage* pExample = (SdPage*)pDoc->GetSdPage((USHORT)nExample, PK_STANDARD);
SdPage* pPage = (SdPage*)pDoc->AllocPage(FALSE);
pPage->SetLayoutName(pExample->GetLayoutName());
// einfuegen (Seite)
pDoc->InsertPage(pPage, (USHORT)(nTarget) * 2 + 1);
AddUndo(new SdrUndoNewPage(*pPage));
// der Standardseite eine Masterpage zuweisen
pPage->TRG_SetMasterPage(pExample->TRG_GetMasterPage());
// Seitengroesse setzen
pPage->SetSize(pExample->GetSize());
pPage->SetBorder( pExample->GetLftBorder(),
pExample->GetUppBorder(),
pExample->GetRgtBorder(),
pExample->GetLwrBorder() );
// neue Praesentationsobjekte anlegen (auf <Titel> oder
// <Titel mit Untertitel> folgt <Titel mit Gliederung>, ansonsten
// wird das Layout von der Vorgaengerseite uebernommen)
AutoLayout eAutoLayout = pExample->GetAutoLayout();
if (eAutoLayout == AUTOLAYOUT_TITLE ||
eAutoLayout == AUTOLAYOUT_ONLY_TITLE)
{
pPage->SetAutoLayout(AUTOLAYOUT_ENUM, TRUE);
}
else
{
pPage->SetAutoLayout(pExample->GetAutoLayout(), TRUE);
}
/**********************************************************************
|* jetzt die Notizseite
\*********************************************************************/
pExample = (SdPage*)pDoc->GetSdPage((USHORT)nExample, PK_NOTES);
SdPage* pNotesPage = (SdPage*)pDoc->AllocPage(FALSE);
pNotesPage->SetLayoutName(pExample->GetLayoutName());
pNotesPage->SetPageKind(PK_NOTES);
// einfuegen (Notizseite)
pDoc->InsertPage(pNotesPage, (USHORT)(nTarget) * 2 + 2);
AddUndo(new SdrUndoNewPage(*pNotesPage));
// der Notizseite eine Masterpage zuweisen
pNotesPage->TRG_SetMasterPage(pExample->TRG_GetMasterPage());
// Seitengroesse setzen, es muss bereits eine Seite vorhanden sein
pNotesPage->SetSize(pExample->GetSize());
pNotesPage->SetBorder( pExample->GetLftBorder(),
pExample->GetUppBorder(),
pExample->GetRgtBorder(),
pExample->GetLwrBorder() );
// neue Praesentationsobjekte anlegen
pNotesPage->SetAutoLayout(pExample->GetAutoLayout(), TRUE);
EndUndo();
SfxUndoManager* pDocUndoMgr = pDocSh->GetUndoManager();
SfxLinkUndoAction* pLink = new SfxLinkUndoAction(pDocUndoMgr);
pOutliner->GetUndoManager().AddUndoAction(pLink);
pOutliner->UpdateFields();
}
return 0;
}
/*************************************************************************
|*
|* Handler fuer das Loeschen von Seiten (Absaetzen)
|*
\************************************************************************/
IMPL_LINK( OutlineView, ParagraphRemovingHdl, ::Outliner *, pOutliner )
{
OutlineViewPageChangesGuard aGuard(this);
Paragraph* pPara = pOutliner->GetHdlParagraph();
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) == 0 )
{
// wieviele Titel sind vor dem fraglichen Titelabsatz?
ULONG nPos = 0L;
while(pPara)
{
pPara = GetPrevTitle(pPara);
if (pPara) nPos++;
}
// Seite und Notizseite loeschen
BegUndo();
USHORT nAbsPos = (USHORT)nPos * 2 + 1;
SdrPage* pPage = pDoc->GetPage(nAbsPos);
AddUndo(new SdrUndoDelPage(*pPage));
pDoc->RemovePage(nAbsPos);
nAbsPos = (USHORT)nPos * 2 + 1;
pPage = pDoc->GetPage(nAbsPos);
AddUndo(new SdrUndoDelPage(*pPage));
pDoc->RemovePage(nAbsPos);
EndUndo();
SfxUndoManager* pDocUndoMgr = pDocSh->GetUndoManager();
SfxLinkUndoAction* pLink = new SfxLinkUndoAction(pDocUndoMgr);
pOutliner->GetUndoManager().AddUndoAction(pLink);
// ggfs. Fortschrittsanzeige
if (nPagesToProcess)
{
nPagesProcessed++;
if(mpProgress)
mpProgress->SetState(nPagesProcessed);
if (nPagesProcessed == nPagesToProcess)
{
if(mpProgress)
{
delete mpProgress;
mpProgress = NULL;
}
nPagesToProcess = 0;
nPagesProcessed = 0;
}
}
pOutliner->UpdateFields();
}
return 0;
}
/*************************************************************************
|*
|* Handler fuer das Aendern der Einruecktiefe von Absaetzen (macht ggfs.
|* das Einfuegen oder Loeschen von Seiten notwendig)
|*
\************************************************************************/
IMPL_LINK( OutlineView, DepthChangedHdl, ::Outliner *, pOutliner )
{
OutlineViewPageChangesGuard aGuard(this);
Paragraph* pPara = pOutliner->GetHdlParagraph();
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) == 0 )
{
// werden da etwa mehrere Level-1-Absaetze auf Level 0 gebracht und
// wir sollten eine Fortschrittsanzeige oder Eieruhr aufsetzen und
// haben es noch nicht getan?
if (nPagesToProcess == 0)
{
Window* pActWin = pOutlineViewShell->GetActiveWindow();
OutlinerView* pOlView = GetViewByWindow(pActWin);
List* pList = pOlView->CreateSelectionList();
Paragraph* pParagraph = (Paragraph*)pList->First();
while (pParagraph)
{
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pParagraph ) ) == 1 )
nPagesToProcess++;
pParagraph = (Paragraph*)pList->Next();
}
nPagesToProcess++; // der Absatz, der jetzt schon auf Level 0
// steht, gehoert auch dazu
nPagesProcessed = 0;
if (nPagesToProcess > PROCESS_WITH_PROGRESS_THRESHOLD)
{
if( mpProgress )
delete mpProgress;
const String aStr(SdResId(STR_CREATE_PAGES));
mpProgress = new SfxProgress( GetDocSh(), aStr, nPagesToProcess );
}
else
{
pDocSh->SetWaitCursor( TRUE );
}
delete pList;
}
ParagraphInsertedHdl(pOutliner);
nPagesProcessed++;
// muss eine Fortschrittsanzeige gepflegt werden?
if (nPagesToProcess > PROCESS_WITH_PROGRESS_THRESHOLD)
{
if (mpProgress)
mpProgress->SetState(nPagesProcessed);
}
// war das die letzte Seite?
if (nPagesProcessed == nPagesToProcess)
{
if (nPagesToProcess > PROCESS_WITH_PROGRESS_THRESHOLD && mpProgress)
{
delete mpProgress;
mpProgress = NULL;
}
else
pDocSh->SetWaitCursor( FALSE );
nPagesToProcess = 0;
nPagesProcessed = 0;
}
pOutliner->UpdateFields();
}
else if (pOutliner->GetPrevDepth() == 0)
{
// wieviele Titel sind vor dem fraglichen Titelabsatz?
ULONG nPos = 0L;
Paragraph* pParagraph = pPara;
while(pParagraph)
{
pParagraph = GetPrevTitle(pParagraph);
if (pParagraph)
nPos++;
}
// Seite und Notizseite loeschen
BegUndo();
USHORT nAbsPos = (USHORT)nPos * 2 + 1;
SdrPage* pPage = pDoc->GetPage(nAbsPos);
AddUndo(new SdrUndoDelPage(*pPage));
pDoc->RemovePage(nAbsPos);
nAbsPos = (USHORT)nPos * 2 + 1;
pPage = pDoc->GetPage(nAbsPos);
AddUndo(new SdrUndoDelPage(*pPage));
pDoc->RemovePage(nAbsPos);
EndUndo();
SfxUndoManager* pDocUndoMgr = pDocSh->GetUndoManager();
SfxLinkUndoAction* pLink = new SfxLinkUndoAction(pDocUndoMgr);
pOutliner->GetUndoManager().AddUndoAction(pLink);
// ggfs. Fortschrittsanzeige
if (nPagesToProcess)
{
nPagesProcessed++;
if (mpProgress)
mpProgress->SetState(nPagesProcessed);
if (nPagesProcessed == nPagesToProcess)
{
if(mpProgress)
{
delete mpProgress;
mpProgress = NULL;
}
nPagesToProcess = 0;
nPagesProcessed = 0;
}
}
pOutliner->UpdateFields();
}
else if ( (pOutliner->GetPrevDepth() == 1) && ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) == 2 ) )
{
// wieviele Titel sind vor dem fraglichen Titelabsatz?
ULONG nPos = -1L;
Paragraph* pParagraph = pPara;
while(pParagraph)
{
pParagraph = GetPrevTitle(pParagraph);
if (pParagraph)
nPos++;
}
if(0 <= nPos)
{
SdPage*pPage = (SdPage*)pDoc->GetSdPage( (USHORT) nPos, PK_STANDARD);
if(pPage && pPage->GetPresObj(PRESOBJ_TEXT))
pOutliner->SetDepth( pPara, 1 );
}
}
// wieviele Titel sind vor dem fraglichen Titelabsatz?
ULONG nPos = -1L;
Paragraph* pTempPara = pPara;
while(pTempPara)
{
pTempPara = GetPrevTitle(pTempPara);
if (pTempPara)
nPos++;
}
if( 0 <= nPos)
{
SdPage* pPage = (SdPage*) pDoc->GetSdPage( (USHORT) nPos, PK_STANDARD );
if( pPage )
{
SfxStyleSheet* pStyleSheet = NULL;
ULONG nPara = pOutliner->GetAbsPos( pPara );
ULONG nDepth = pOutliner->GetDepth( (USHORT) nPara );
BOOL bSubTitle = pPage->GetPresObj(PRESOBJ_TEXT) != NULL;
if( nDepth == 0 )
{
pStyleSheet = pPage->GetStyleSheetForPresObj( PRESOBJ_TITLE );
}
else if( bSubTitle )
{
pStyleSheet = pPage->GetStyleSheetForPresObj( PRESOBJ_TEXT );
}
else
{
pStyleSheet = pPage->GetStyleSheetForPresObj( PRESOBJ_OUTLINE );
if( nDepth > 1 )
{
String aNewStyleSheetName( pStyleSheet->GetName() );
aNewStyleSheetName.Erase( aNewStyleSheetName.Len()-1, 1 );
aNewStyleSheetName += String::CreateFromInt32( nDepth );
SfxStyleSheetBasePool* pStylePool = pDoc->GetStyleSheetPool();
pStyleSheet = (SfxStyleSheet*) pStylePool->Find( aNewStyleSheetName, pStyleSheet->GetFamily() );
}
}
// before we set the style sheet we need to preserve the bullet item
// since all items will be deleted while setting a new style sheet
SfxItemSet aOldAttrs( pOutliner->GetParaAttribs( nPara ) );
pOutliner->SetStyleSheet( nPara, pStyleSheet );
// restore the old bullet item but not if the style changed
if ( pOutliner->GetPrevDepth() != 0 &&
nDepth != 0 &&
aOldAttrs.GetItemState( EE_PARA_NUMBULLET ) == SFX_ITEM_ON )
{
SfxItemSet aAttrs( pOutliner->GetParaAttribs( nPara ) );
aAttrs.Put( *aOldAttrs.GetItem( EE_PARA_NUMBULLET ) );
pOutliner->SetParaAttribs( nPara, aAttrs );
}
}
}
return 0;
}
/*************************************************************************
|*
|* Handler fuer StatusEvents
|*
\************************************************************************/
IMPL_LINK( OutlineView, StatusEventHdl, EditStatus *, pEditStatus )
{
::sd::Window* pWin = pOutlineViewShell->GetActiveWindow();
OutlinerView* pOutlinerView = GetViewByWindow(pWin);
Rectangle aVis = pOutlinerView->GetVisArea();
// ULONG nWidth = ((SdPage*)pDoc->GetSdPage(0, PK_STANDARD))->GetSize().Width();
ULONG nWidth = OUTLINE_PAPERWIDTH;
Rectangle aText = Rectangle(Point(0,0),
Size(nWidth,
pOutliner->GetTextHeight()));
Rectangle aWin(Point(0,0), pWin->GetOutputSizePixel());
aWin = pWin->PixelToLogic(aWin);
if (!aVis.IsEmpty()) // nicht beim Oeffnen
{
aText.Bottom() += aWin.GetHeight();
pOutlineViewShell->InitWindows(Point(0,0), aText.GetSize(),
Point(aVis.TopLeft()));
pOutlineViewShell->UpdateScrollBars();
}
return 0;
}
/*************************************************************************
|*
|* Handler fuer den Beginn einer Absatzverschiebung
|*
\************************************************************************/
IMPL_LINK( OutlineView, BeginMovingHdl, ::Outliner *, pOutliner )
{
DBG_ASSERT(!pSelectedParas, "Absatzliste nicht geloescht");
DBG_ASSERT(!pOldParaOrder, "Absatzliste nicht geloescht");
pOldParaOrder = new List;
// Liste der selektierten Titelabsaetze
pSelectedParas = pOutlinerView[0]->CreateSelectionList();
Paragraph* pPara = (Paragraph*)pSelectedParas->First();
while (pPara)
{
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) > 0 )
{
pSelectedParas->Remove();
pPara = (Paragraph*)pSelectedParas->GetCurObject();
}
else
{
pPara = (Paragraph*)pSelectedParas->Next();
}
}
// Die zu den selektierten Absaetzen auf Ebene 0 gehoerenden Seiten
// selektieren
USHORT nPos = 0;
ULONG nParaPos = 0;
pPara = pOutliner->GetParagraph( 0 );
while (pPara)
{
if ( pOutliner->GetDepth( (USHORT) nParaPos ) == 0 ) // eine Seite?
{
pOldParaOrder->Insert(pPara, LIST_APPEND);
SdPage* pPage = pDoc->GetSdPage(nPos, PK_STANDARD);
pPage->SetSelected(FALSE);
if (pSelectedParas->Seek(pPara)) // selektiert?
{
pPage->SetSelected(TRUE);
}
nPos++;
}
pPara = pOutliner->GetParagraph( ++nParaPos );
}
return 0;
}
/*************************************************************************
|*
|* Handler fuer das Ende einer Absatzverschiebung
|*
\************************************************************************/
IMPL_LINK( OutlineView, EndMovingHdl, ::Outliner *, pOutliner )
{
DBG_ASSERT(pSelectedParas, "keine Absatzliste");
DBG_ASSERT(pOldParaOrder, "keine Absatzliste");
// Einfuegeposition anhand des ersten Absatzes suchen
Paragraph* pSearchIt = (Paragraph*)pSelectedParas->First();
// den ersten der selektierten Paragraphen in der neuen Ordnung suchen
USHORT nPosNewOrder = 0;
ULONG nParaPos = 0;
Paragraph* pPara = pOutliner->GetParagraph( 0 );
Paragraph* pPrev = NULL;
while (pPara && pPara != pSearchIt)
{
if (pOutliner->GetDepth( (USHORT) nParaPos ) == 0)
{
nPosNewOrder++;
pPrev = pPara;
}
pPara = pOutliner->GetParagraph( ++nParaPos );
}
USHORT nPos = nPosNewOrder; // nPosNewOrder nicht veraendern
if (nPos == 0)
{
nPos = (USHORT)-1; // vor der ersten Seite einfuegen
}
else
{
// den Vorgaenger in der alten Ordnung suchen
nPos = (USHORT)pOldParaOrder->GetPos(pPrev);
DBG_ASSERT(nPos != LIST_ENTRY_NOTFOUND, "Absatz nicht gefunden");
}
BOOL bTest = pDoc->MovePages(nPos);
// die Seiten wieder deselektieren
USHORT nPageCount = (USHORT)pSelectedParas->Count();
while (nPageCount)
{
SdPage* pPage = pDoc->GetSdPage(nPosNewOrder, PK_STANDARD);
pPage->SetSelected(FALSE);
nPosNewOrder++;
nPageCount--;
}
pOutliner->UpdateFields();
delete pSelectedParas;
pSelectedParas = NULL;
delete pOldParaOrder;
pOldParaOrder = NULL;
return 0;
}
/*************************************************************************
|*
|* Eine Seite des Models nach dem Titeltextobjekt durchsuchen
|*
\************************************************************************/
SdrTextObj* OutlineView::GetTitleTextObject(SdrPage* pPage)
{
ULONG nObjectCount = pPage->GetObjCount();
SdrObject* pObject = NULL;
SdrTextObj* pResult = NULL;
for (ULONG nObject = 0; nObject < nObjectCount; nObject++)
{
pObject = pPage->GetObj(nObject);
if (pObject->GetObjInventor() == SdrInventor &&
pObject->GetObjIdentifier() == OBJ_TITLETEXT)
{
pResult = (SdrTextObj*)pObject;
break;
}
}
return pResult;
}
/*************************************************************************
|*
|* Eine Seite des Models nach dem Gliederungstextobjekt durchsuchen
|*
\************************************************************************/
SdrTextObj* OutlineView::GetLayoutTextObject(SdrPage* pPage)
{
ULONG nObjectCount = pPage->GetObjCount();
SdrObject* pObject = NULL;
SdrTextObj* pResult = NULL;
for (ULONG nObject = 0; nObject < nObjectCount; nObject++)
{
pObject = pPage->GetObj(nObject);
if (pObject->GetObjInventor() == SdrInventor &&
pObject->GetObjIdentifier() == OBJ_OUTLINETEXT)
{
pResult = (SdrTextObj*)pObject;
break;
}
}
return pResult;
}
/*************************************************************************
|*
|* PrepareClose(), Daten und Selektion ins Model uebertragen
|*
\************************************************************************/
BOOL OutlineView::PrepareClose(BOOL bUI)
{
if( pOutliner->IsModified() )
{
// die Seiten des Models mit den Inhalten des Outliners fuellen
USHORT nPageCount = pDoc->GetSdPageCount(PK_STANDARD);
Paragraph* pPara = NULL;
SdrTextObj* pTO = NULL;
OutlinerParaObject* pOPO = NULL;
SfxItemPool* pPool = pDoc->GetDrawOutliner().GetEmptyItemSet().GetPool();
// den Outliner in den OutlinerStyle setzen; dann wird ein von ihm
// erzeugter Titeltext bei der Anzeige durch einen Outliner im
// EditEngine-Modus mit der Titelvorlage formatiert
SdrOutliner* pTempLiner = new SdrOutliner( pPool, OUTLINERMODE_OUTLINEOBJECT );
pTempLiner->SetStyleSheetPool((SfxStyleSheetPool*)pDoc->GetStyleSheetPool());
pTempLiner->SetEditTextObjectPool(pPool);
pTempLiner->SetForbiddenCharsTable( pDoc->GetForbiddenCharsTable() );
// Referenz-Device setzen
pTempLiner->SetRefDevice( SD_MOD()->GetRefDevice( *pDocSh ) );
SfxStyleSheetBasePool* pSPool = pDoc->GetStyleSheetPool();
pTempLiner->SetMinDepth(0);
BOOL bBegUndoDone = FALSE; // wurde schon BegUndo() gerufen?
String aUndoStr;
aUndoStr = String(SdResId(STR_UNDO_CHANGE_TITLE_AND_LAYOUT));
/**************************************************************************
|* jetzt die Seiten fuellen
\*************************************************************************/
pPara = pOutliner->GetParagraph( 0 );
for (USHORT nPage = 0; nPage < nPageCount; nPage++)
{
SdPage* pPage = pDoc->GetSdPage(nPage, PK_STANDARD);
SdPage& rMasterPage = (SdPage&)pPage->TRG_GetMasterPage();
Point aPos;
Rectangle aTitleRect ( aPos, pPage->GetSize() );
Rectangle aLayoutRect ( aTitleRect );
SdrObject* pTitleObj = rMasterPage.GetPresObj(PRESOBJ_TITLE);
SdrObject* pLayoutObj = rMasterPage.GetPresObj(PRESOBJ_OUTLINE);
if (pTitleObj)
{
aTitleRect = pTitleObj->GetLogicRect();
}
if (pLayoutObj)
{
aLayoutRect = pLayoutObj->GetLogicRect();
}
pDoc->SetSelected(pPage, FALSE); // deselektieren
// Liste der Gliederungsvorlagen fuer Anmeldung als Listener
String aName = pPage->GetLayoutName();
// erst fuer die Gliederungsebenen
List* pOutlineStyleList = new List; // StyleSheet-Liste zum Anmelden
pOutlineStyleList->Insert(NULL, LIST_APPEND);
String aFullName;
SfxStyleSheetBase* pSheet = NULL;
for (USHORT i = 1; i < 10; i++)
{
aFullName = aName;
aFullName += sal_Unicode(' ');
aFullName += String::CreateFromInt32( (sal_Int32)i );;
pSheet = pSPool->Find(aFullName, SD_LT_FAMILY);
pOutlineStyleList->Insert(pSheet, LIST_APPEND);
}
// Titelvorlage
aFullName = aName;
String aSep( RTL_CONSTASCII_USTRINGPARAM( SD_LT_SEPARATOR ));
USHORT n = aFullName.Search(aSep);
n += aSep.Len();
aFullName.Erase(n);
aFullName += String (SdResId(STR_LAYOUT_TITLE));
SfxStyleSheet* pTitleSheet = (SfxStyleSheet*)pSPool->
Find(aFullName, SD_LT_FAMILY);
DBG_ASSERT(pTitleSheet, "Titelvorlage nicht gefunden");
/*********************************************************************
|* Titeltextobjekt
\********************************************************************/
pTO = GetTitleTextObject(pPage);
String aTest(pOutliner->GetText(pPara));
BOOL bText = aTest.Len() > 0;
if (!pTO && bText)
{
// Kein Seitenobjekt, Text im Outliner:
// Entspr. Seitenobjekt erzeugen und einfuegen
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
pTO = new SdrRectObj(OBJ_TITLETEXT);
pOPO = pOutliner->CreateParaObject( (USHORT) pOutliner->GetAbsPos( pPara ), 1 );
pOPO->SetOutlinerMode( OUTLINERMODE_TITLEOBJECT );
pTO->SetEmptyPresObj(FALSE);
// als Praesentationsobjekt anmelden
pTO->SetUserCall(pPage);
pPage->InsertPresObj(pTO, PRESOBJ_TITLE);
pPage->InsertObject(pTO);
pTO->SetOutlinerParaObject(pOPO);
// TRUE: DontRemoveHardAttr
pTO->SetStyleSheet(pTitleSheet, TRUE);
AutoLayout eLayout = pPage->GetAutoLayout();
if( eLayout == AUTOLAYOUT_VERTICAL_TITLE_TEXT_CHART ||
eLayout == AUTOLAYOUT_VERTICAL_TITLE_VERTICAL_OUTLINE )
pTO->SetVerticalWriting( TRUE );
AddUndo(new SdrUndoNewObj(*pTO));
}
else if (pTO && bText)
{
// Seitenobjekt, Text im Outliner:
// Titeltext uebernehmen
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
pOPO = pOutliner->CreateParaObject( (USHORT) pOutliner->GetAbsPos( pPara ), 1 );
pOPO->SetOutlinerMode( OUTLINERMODE_TITLEOBJECT );
pOPO->SetVertical( pTO->IsVerticalWriting() );
// loescht altes OutlinerParaObject
AddUndo(new SdrUndoObjSetText(*pTO));
pTO->SetOutlinerParaObject(pOPO);
pTO->SetEmptyPresObj(FALSE);
}
else if (!pTO && !bText)
{
// Kein Seitenobjekt, kein Text im Outliner: nix tun
}
else if(pTO && !bText)
{
// Seitenobjekt, kein Text im Outliner:
// wenn Objekt in Praesentationsliste der Seite ist -> Defaulttext,
// sonst Objekt loeschen
if (pPage->IsPresObj(pTO))
{
if( !pTO->IsEmptyPresObj() )
{
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
BOOL bVertical = pTO->IsVerticalWriting();
AddUndo(new SdrUndoObjSetText(*pTO));
String aString( pPage->GetPresObjText(PRESOBJ_TITLE) );
pPage->SetObjText( pTO, pTempLiner, PRESOBJ_TITLE, aString );
pTO->SetVerticalWriting(bVertical);
pTO->NbcSetStyleSheet( pPage->GetStyleSheetForPresObj(PRESOBJ_TITLE), TRUE );
/* pTempLiner->Init( OUTLINERMODE_TITLEOBJECT );
pTempLiner->SetMinDepth(0);
String aString (SdResId(STR_PRESOBJ_TITLE));
pTempLiner->Insert(aString, LIST_APPEND, 0);
pOPO = pTempLiner->CreateParaObject( 0, 1 );
pOPO->SetOutlinerMode( OUTLINERMODE_TITLEOBJECT );
pTO->SetOutlinerParaObject(pOPO);
* */
pTO->SetEmptyPresObj(TRUE);
pTempLiner->SetMinDepth(0);
}
}
else
{
// Grafik: Seitenobjekt loeschen
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
AddUndo(new SdrUndoRemoveObj(*pTO));
pPage->RemoveObject(pTO->GetOrdNum());
}
}
/*********************************************************************
|* Gliederungstextobjekt
\********************************************************************/
BOOL bSubTitle = FALSE;
pTO = (SdrTextObj*) pPage->GetPresObj(PRESOBJ_TEXT);
if (pTO)
{
bSubTitle = TRUE;
}
else
{
pTO = GetLayoutTextObject(pPage);
}
pOPO = NULL;
// Wenn moeglich, OutlinerParaObject fuer Gliederung erzeugen
if ( pPara && pOutliner->HasChilds(pPara) )
{
// wieviele Absaetze in der Gliederung?
ULONG nTitlePara = pOutliner->GetAbsPos(pPara);
ULONG nParaPos = nTitlePara;
ULONG nParasInLayout = 0L;
pPara = pOutliner->GetParagraph( ++nParaPos );
while (pPara && pOutliner->GetDepth( (USHORT) nParaPos ) != 0)
{
nParasInLayout++;
pPara = pOutliner->GetParagraph( ++nParaPos );
}
// ein OutlinerParaObject erzeugen
pPara = pOutliner->GetParagraph(nTitlePara + 1);
pOPO = pOutliner->CreateParaObject( (USHORT) nTitlePara + 1, (USHORT) nParasInLayout );
pOPO->SetOutlinerMode( OUTLINERMODE_OUTLINEOBJECT );
}
if (!pTO && pOPO)
{
// Kein Seitenobjekt, Gliederungstext im Outliner
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
pTO = new SdrRectObj(OBJ_OUTLINETEXT);
pTO->SetEmptyPresObj(FALSE);
// als Praesentationsobjekt anmelden
pTO->SetUserCall(pPage);
pPage->InsertPresObj(pTO, PRESOBJ_OUTLINE);
pPage->InsertObject(pTO);
pTO->SetOutlinerParaObject(pOPO);
AutoLayout eLayout = pPage->GetAutoLayout();
if( eLayout == AUTOLAYOUT_TITLE_VERTICAL_OUTLINE ||
eLayout == AUTOLAYOUT_VERTICAL_TITLE_VERTICAL_OUTLINE ||
eLayout == AUTOLAYOUT_TITLE_VERTICAL_OUTLINE_CLIPART )
pTO->SetVerticalWriting( TRUE );
// Linien- und Fuellattribute der Standardvorlage hart
// ueberschreiben
SfxItemSet aTempAttr(pDoc->GetPool());
aTempAttr.Put(XLineStyleItem(XLINE_NONE));
aTempAttr.Put(XFillStyleItem(XFILL_NONE));
pTO->SetMergedItemSetAndBroadcast(aTempAttr);
// als Listener anmelden
for (USHORT i = 1; i < 10; i++)
{
SfxStyleSheet* pS = (SfxStyleSheet*)pOutlineStyleList->GetObject(i);
if (pS)
{
pTO->StartListening(*pS);
if( i == 1 )
pTO->SetStyleSheet( pS, TRUE );
}
}
AddUndo(new SdrUndoNewObj(*pTO));
}
else if (pTO && pOPO)
{
// Seitenobjekt, Gliederungstext im Outliner:
// Text uebernehmen
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
// loescht auch altes OutlinerParaObject
AddUndo(new SdrUndoObjSetText(*pTO));
if (bSubTitle)
{
// Fuer alle Absaetze im TextObjekt schauen ob eine Ausrichtung
// gesetzt ist, wenn nicht => zentrieren
Outliner* pOutl = pDoc->GetInternalOutliner();
pOutl->Clear();
pOutl->SetText( *pOPO );
ULONG nCount = pOutl->GetParagraphCount();
for( ULONG nPara = 0; nPara < nCount; nPara++ )
{
SfxItemSet aSet( pOutl->GetParaAttribs( nPara ) );
if (aSet.GetItemState(EE_PARA_JUST) != SFX_ITEM_SET)
{
aSet.Put(SvxAdjustItem( SVX_ADJUST_CENTER ));
pOutl->SetParaAttribs(nPara, aSet);
}
}
delete pOPO;
pOPO = pOutl->CreateParaObject( 0, (USHORT) nCount );
pOPO->SetOutlinerMode( OUTLINERMODE_TEXTOBJECT );
pOutl->Clear();
}
pOPO->SetVertical( pTO->IsVerticalWriting() );
pTO->SetOutlinerParaObject(pOPO);
pTO->SetEmptyPresObj(FALSE);
if (bSubTitle)
{
// Subtitle-Vorlage setzen
SfxStyleSheet* pSheet = pPage->GetStyleSheetForPresObj(PRESOBJ_TEXT);
if( pTO->GetStyleSheet() != pSheet )
pTO->SetStyleSheet(pSheet, TRUE);
// Untertitel-Objekt statt Gliederung -> Linken Einzug zuruecksetzen
SfxItemSet aSet(pDoc->GetPool(), EE_PARA_LRSPACE, EE_PARA_LRSPACE);
//-/ pTO->TakeAttributes(aSet, TRUE, FALSE);
aSet.Put(pTO->GetMergedItemSet());
if (aSet.GetItemState(EE_PARA_LRSPACE) != SFX_ITEM_SET)
{
const SvxLRSpaceItem& rLRItem = (const SvxLRSpaceItem&) aSet.Get(EE_PARA_LRSPACE);
SvxLRSpaceItem aNewLRItem(rLRItem);
aNewLRItem.SetTxtLeft(0);
aSet.Put(aNewLRItem);
//-/ pTO->NbcSetAttributes(aSet, FALSE);
pTO->SetMergedItemSet(aSet);
}
}
}
else if (!pTO && !pOPO)
{
// kein Seitenobjekt, kein Gliederungstext: nix tun
}
else if (pTO && !pOPO)
{
// Seitenobjekt, aber kein Gliederungstext:
// wenn Objekt in Praesentationsliste der Seite ist -> Defaulttext,
// sonst Objekt loeschen
if( pPage->IsPresObj(pTO) )
{
if( !pTO->IsEmptyPresObj() )
{
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
// loescht auch altes OutlinerParaObject
AddUndo(new SdrUndoObjSetText(*pTO));
pTempLiner->Init( OUTLINERMODE_OUTLINEOBJECT );
pTempLiner->SetMinDepth(0);
String aEmptyStr;
PresObjKind ePresObjKind = pPage->GetPresObjKind(pTO);
String aString = pPage->GetPresObjText(ePresObjKind);
pPage->SetObjText( pTO, pTempLiner, ePresObjKind, aString );
pTO->NbcSetStyleSheet( pPage->GetStyleSheetForPresObj( ePresObjKind ), TRUE );
pTO->GetOutlinerParaObject()->SetVertical( pTO->IsVerticalWriting() );
if (ePresObjKind == PRESOBJ_TEXT)
{
pTempLiner->Init( OUTLINERMODE_SUBTITLE );
// Vorlage setzen
pTO->SetStyleSheet(pPage->GetStyleSheetForPresObj(ePresObjKind), TRUE);
// Linken Einzug zuruecksetzen
SfxItemSet aSet(pDoc->GetPool(), EE_PARA_LRSPACE, EE_PARA_LRSPACE);
//-/ pTO->TakeAttributes(aSet, TRUE, FALSE);
aSet.Put(pTO->GetMergedItemSet());
const SvxLRSpaceItem& rLRItem = (const SvxLRSpaceItem&) aSet.Get(EE_PARA_LRSPACE);
SvxLRSpaceItem aNewLRItem(rLRItem);
aNewLRItem.SetTxtLeft(0);
aSet.Put(aNewLRItem);
//-/ pTO->NbcSetAttributes(aSet, FALSE);
pTO->SetMergedItemSet(aSet);
}
pTO->SetEmptyPresObj(TRUE);
pTempLiner->SetMinDepth(0);
}
}
else
{
if (!bBegUndoDone)
{
BegUndo(aUndoStr);
bBegUndoDone = TRUE;
}
AddUndo(new SdrUndoRemoveObj(*pTO));
pPage->RemoveObject(pTO->GetOrdNum());
}
}
delete pOutlineStyleList;
// das AutoLayout nochmal anwenden, damit neu eingefuegte Textobjekte
// die richtige Position/Groesse bekommen
pPage->SetAutoLayout(pPage->GetAutoLayout());
// zum naechsten Absatz der 0-ten Ebene
if( pPara )
pPara = GetNextTitle(pPara);
}
if (bBegUndoDone)
{
// Actions im Redo-Anteil des Outliner-UndoManagers loeschen, denn die
// referenzieren Actions im Redo-Anteil des Doc-UndoManagers (und die
// werden bei EndUndo() geloescht --> Referenzen ins Leere --> Absturz)
pOutliner->GetUndoManager().ClearRedo();
EndUndo();
SfxUndoManager* pDocUndoMgr = pDocSh->GetUndoManager();
SfxLinkUndoAction* pLink = new SfxLinkUndoAction(pDocUndoMgr);
pOutliner->GetUndoManager().AddUndoAction(pLink);
}
// die Seite selektieren
SdPage* pPage = GetActualPage();
pDoc->SetSelected(pPage, TRUE);
// temporaeren Outliner loeschen
delete pTempLiner;
}
return TRUE; // einverstanden mit der eigenen Zerstoerung
}
/*************************************************************************
|*
|* Attribute des selektierten Textes setzen
|*
\************************************************************************/
BOOL OutlineView::SetAttributes(const SfxItemSet& rSet, BOOL bReplaceAll)
{
FASTBOOL bOk = FALSE;
OutlinerView* pOlView = GetViewByWindow(pOutlineViewShell->GetActiveWindow());
if (pOlView)
{
pOlView->SetAttribs(rSet);
bOk = TRUE;
}
pOutlineViewShell->Invalidate (SID_PREVIEW_STATE);
return (bOk);
}
/*************************************************************************
|*
|* Attribute des selektierten Textes erfragen
|*
\************************************************************************/
BOOL OutlineView::GetAttributes( SfxItemSet& rTargetSet, BOOL bOnlyHardAttr ) const
{
OutlinerView* pOlView = GetViewByWindow(
pOutlineViewShell->GetActiveWindow());
DBG_ASSERT(pOlView, "keine OutlinerView gefunden");
rTargetSet.Put( pOlView->GetAttribs(), FALSE );
return TRUE;
}
/*************************************************************************
|*
|* gibt's selektierten Text ?
|*
\************************************************************************/
//BOOL OutlineView::HasMarkedObj_unused() const
//{
// BOOL bResult = FALSE;
// OutlinerView* pOlView = GetViewByWindow(
// pOutlineViewShell->GetActiveWindow());
// DBG_ASSERT(pOlView, "keine OutlinerView gefunden");
// List* pSelList = (List*)pOlView->CreateSelectionList();
// if (pSelList->Count() > 0)
// bResult = TRUE;
//
// delete pSelList;
// return bResult;
//}
/*************************************************************************
|*
|* Outliner mit Daten aus dem SdDrawDocument fuellen
|*
\************************************************************************/
void OutlineView::FillOutliner()
{
ResetLinks();
pOutliner->SetMinDepth(0);
Paragraph* pTitleToSelect = NULL;
ULONG nPageCount = pDoc->GetSdPageCount(PK_STANDARD);
// Outliner mit Text versorgen
for (USHORT nPage = 0; nPage < nPageCount; nPage++)
{
SdPage* pPage = (SdPage*)pDoc->GetSdPage(nPage, PK_STANDARD);
Paragraph * pPara = NULL;
// Titeltext uebernehmen
SdrTextObj* pTO = GetTitleTextObject(pPage);
if (pTO)
{
if (!(pTO->IsEmptyPresObj())) // gesetzten Titeltext gefunden
{
OutlinerParaObject* pOPO = pTO->GetOutlinerParaObject();
if (pOPO)
{
BOOL bVertical = pOPO->IsVertical();
pOPO->SetVertical( FALSE );
pOutliner->AddText(*pOPO);
pOPO->SetVertical( bVertical );
pPara = pOutliner->GetParagraph( pOutliner->GetParagraphCount() - 1 );
// Man sollte meinen, dass folgendes Statement unnoetig sei,
// aber ueber das #39788#-Bugdoc ist eine Inkonsistenz im
// Doc aufgefallen, wo Titel die Ebene 1 (nicht 0) hat.
// Die Ursache ist bisher ungeklaert.
pOutliner->SetDepth( pPara, 0 );
}
else
{
pPara = pOutliner->Insert(String());
// Keine harten Attribute vom vorherigen Absatz uebernehmen
pOutliner->SetParaAttribs( pOutliner->GetAbsPos(pPara),
pOutliner->GetEmptyItemSet() );
pPara = pOutliner->GetParagraph( pOutliner->GetParagraphCount() - 1 );
}
}
else // leerer Praesentationstitel
{
pPara = pOutliner->Insert(String());
// Keine harten Attribute vom vorherigen Absatz uebernehmen
pOutliner->SetParaAttribs( pOutliner->GetAbsPos(pPara),
pOutliner->GetEmptyItemSet() );
pOutliner->SetStyleSheet( pOutliner->GetAbsPos( pPara ), pPage->GetStyleSheetForPresObj( PRESOBJ_TITLE ) );
}
}
else // kein Titeltext, also leerer Titel
{
pPara = pOutliner->Insert(String());
// Keine harten Attribute vom vorherigen Absatz uebernehmen
pOutliner->SetParaAttribs( pOutliner->GetAbsPos(pPara),
pOutliner->GetEmptyItemSet() );
pOutliner->SetStyleSheet( pOutliner->GetAbsPos( pPara ), pPage->GetStyleSheetForPresObj( PRESOBJ_TITLE ) );
}
// selektierte Seite merken
if (pPage->IsSelected())
{
pTitleToSelect = pPara;
}
// Gliederungstext uebernehmen
pTO = (SdrTextObj*)pPage->GetPresObj(PRESOBJ_TEXT);
BOOL bSubTitle = pTO != NULL;
if (!pTO)
{
pTO = GetLayoutTextObject(pPage);
}
if (pTO)
{
if(!(pTO->IsEmptyPresObj())) // gesetzten Gl.text gefunden
{
OutlinerParaObject* pOPO = pTO->GetOutlinerParaObject();
if (pOPO)
{
ULONG nParaCount1 = pOutliner->GetParagraphCount();
BOOL bVertical = pOPO->IsVertical();
pOPO->SetVertical( FALSE );
pOutliner->AddText(*pOPO);
pOPO->SetVertical( bVertical );
if (bSubTitle)
{
ULONG nParaCount2 = pOutliner->GetParagraphCount();
Paragraph* pPara = NULL;
for (ULONG nPara = nParaCount1; nPara < nParaCount2; nPara++)
{
pPara = pOutliner->GetParagraph(nPara);
if(pPara && pOutliner->GetDepth( (USHORT) nPara ) != 1 )
pOutliner->SetDepth(pPara, 1);
}
}
}
}
}
else // kein Gliederungstext, also nichts einfuegen
{
}
}
// Cursor an den Anfang stellen
Paragraph* pFirstPara = pOutliner->GetParagraph( 0 );
pOutlinerView[0]->Select( pFirstPara, TRUE, FALSE );
pOutlinerView[0]->Select( pFirstPara, FALSE, FALSE );
// Titel der selektierten Seite des Models im Outliner selektieren
if (pTitleToSelect)
{
pOutlinerView[0]->Select(pTitleToSelect, TRUE, FALSE);
}
SetLinks();
}
/*************************************************************************
|*
|* Handler fuer das Loeschen von Level-0-Absaetzen (Seiten): Warnung
|*
\************************************************************************/
IMPL_LINK( OutlineView, RemovingPagesHdl, OutlinerView *, pOutlinerView )
{
USHORT nNumOfPages = pOutliner->GetSelPageCount();
if (nNumOfPages > PROCESS_WITH_PROGRESS_THRESHOLD)
{
nPagesToProcess = nNumOfPages;
nPagesProcessed = 0;
}
if (nPagesToProcess)
{
if( mpProgress )
delete mpProgress;
String aStr(SdResId(STR_DELETE_PAGES));
mpProgress = new SfxProgress( GetDocSh(), aStr, nPagesToProcess );
}
pOutliner->UpdateFields();
return 1;
}
/*************************************************************************
|*
|* Handler fuer das Einruecken von Level-0-Absaetzen (Seiten): Warnung
|*
\************************************************************************/
IMPL_LINK_INLINE_START( OutlineView, IndentingPagesHdl, OutlinerView *, pOutlinerView )
{
return RemovingPagesHdl(pOutlinerView);
}
IMPL_LINK_INLINE_END( OutlineView, IndentingPagesHdl, OutlinerView *, pOutlinerView )
/*************************************************************************
|*
|* Liefert die aktuellen Seite
|*
\************************************************************************/
SdPage* OutlineView::GetActualPage()
{
/**************************************************************************
|* Die Seite, in deren Titel oder Gliederung der Cursor (bzw. der
|* Selektionsbeginn) steht, soll selektiert werden.
\*************************************************************************/
::sd::Window* pWin = pOutlineViewShell->GetActiveWindow();
OutlinerView* pActiveView = GetViewByWindow(pWin);
::Outliner* pOutl = pActiveView->GetOutliner();
List* pSelList = (List*)pActiveView->CreateSelectionList();
Paragraph* pPara = (Paragraph*)pSelList->First();
if ( pOutl->GetDepth( (USHORT) pOutl->GetAbsPos( pPara ) ) > 0 )
{
pPara = GetPrevTitle(pPara);
}
USHORT nPageToSelect = 0;
while(pPara)
{
pPara = GetPrevTitle(pPara);
if (pPara) nPageToSelect++;
}
delete pSelList; // die wurde extra fuer uns erzeugt
SdPage* pPage = (SdPage*)pDoc->GetSdPage(nPageToSelect, PK_STANDARD);
return(pPage);
}
/** selects the paragraph for the given page at the outliner view*/
void OutlineView::SetActualPage( SdPage* pActual )
{
if( pActual && mnIgnoreCurrentPageChangesLevel==0)
{
// get the number of paragraphs with ident 0 we need to skip before
// we finde the actual page
USHORT nPagesToSkip = (pActual->GetPageNum() - 1) / 2; // Sdr --> Sd
ULONG nParaPos = 0;
Paragraph* pPara = pOutliner->GetParagraph( 0 );
while( pPara )
{
// if this paragraph is a page ...
if ( pOutliner->GetDepth( (USHORT) nParaPos ) == 0 )
{
// see if we already skiped enough pages
if( 0 == nPagesToSkip )
break; // and if so, end the loop
// we skiped another page
nPagesToSkip--;
}
// get next paragraph
pPara = pOutliner->GetParagraph( ++nParaPos );
}
// if we found a paragraph, select its text at the outliner view
if( pPara )
pOutlinerView[0]->Select( pPara, TRUE, FALSE );
}
}
/*************************************************************************
|*
|* StyleSheet aus der Selektion besorgen
|*
\************************************************************************/
SfxStyleSheet* OutlineView::GetStyleSheet() const
{
::sd::Window* pActWin = pOutlineViewShell->GetActiveWindow();
OutlinerView* pOlView = GetViewByWindow(pActWin);
SfxStyleSheet* pResult = pOlView->GetStyleSheet();
return pResult;
}
/*************************************************************************
|*
|* Seiten als selektiert / nicht selektiert setzen
|*
\************************************************************************/
void OutlineView::SetSelectedPages()
{
// Liste der selektierten Titelabsaetze
List* pSelParas = pOutlinerView[0]->CreateSelectionList();
Paragraph* pPara = (Paragraph*) pSelParas->First();
while (pPara)
{
if ( pOutliner->GetDepth( (USHORT) pOutliner->GetAbsPos( pPara ) ) > 0 )
{
pSelParas->Remove();
pPara = (Paragraph*) pSelParas->GetCurObject();
}
else
{
pPara = (Paragraph*) pSelParas->Next();
}
}
// Die zu den selektierten Absaetzen auf Ebene 0 gehoerenden Seiten
// selektieren
USHORT nPos = 0;
ULONG nParaPos = 0;
pPara = pOutliner->GetParagraph( 0 );
while (pPara)
{
if ( pOutliner->GetDepth( (USHORT) nParaPos ) == 0 ) // eine Seite?
{
SdPage* pPage = pDoc->GetSdPage(nPos, PK_STANDARD);
pPage->SetSelected(FALSE);
if (pSelParas->Seek(pPara)) // selektiert?
{
pPage->SetSelected(TRUE);
}
nPos++;
}
pPara = pOutliner->GetParagraph( ++nParaPos );
}
}
/*************************************************************************
|*
|* Neue Links setzen
|*
\************************************************************************/
void OutlineView::SetLinks()
{
// Benachrichtigungs-Links setzen
pOutliner->SetParaInsertedHdl(LINK(this, OutlineView, ParagraphInsertedHdl));
pOutliner->SetParaRemovingHdl(LINK(this, OutlineView, ParagraphRemovingHdl));
pOutliner->SetDepthChangedHdl(LINK(this, OutlineView, DepthChangedHdl));
pOutliner->SetBeginMovingHdl(LINK(this, OutlineView, BeginMovingHdl));
pOutliner->SetEndMovingHdl(LINK(this, OutlineView, EndMovingHdl));
pOutliner->SetRemovingPagesHdl(LINK(this, OutlineView, RemovingPagesHdl));
pOutliner->SetIndentingPagesHdl(LINK(this, OutlineView, IndentingPagesHdl));
pOutliner->SetMinDepth(0);
pOutliner->SetStatusEventHdl(LINK(this, OutlineView, StatusEventHdl));
}
/*************************************************************************
|*
|* Alte Links restaurieren
|*
\************************************************************************/
void OutlineView::ResetLinks() const
{
// alte Links restaurieren
Link aEmptyLink;
pOutliner->SetParaInsertedHdl(aEmptyLink);
pOutliner->SetParaRemovingHdl(aEmptyLink);
pOutliner->SetDepthChangedHdl(aEmptyLink);
pOutliner->SetBeginMovingHdl(aEmptyLink);
pOutliner->SetEndMovingHdl(aEmptyLink);
pOutliner->SetStatusEventHdl(aEmptyLink);
pOutliner->SetRemovingPagesHdl(aEmptyLink);
pOutliner->SetIndentingPagesHdl(aEmptyLink);
pOutliner->SetMinDepth(0);
}
/*************************************************************************
|*
|* AcceptDrop
|*
\************************************************************************/
sal_Int8 OutlineView::AcceptDrop (
const AcceptDropEvent& rEvt,
DropTargetHelper& rTargetHelper,
::sd::Window* pTargetWindow,
USHORT nPage,
USHORT nLayer)
{
return DND_ACTION_NONE;
}
/*************************************************************************
|*
|* ExecuteDrop
|*
\************************************************************************/
sal_Int8 OutlineView::ExecuteDrop (
const ExecuteDropEvent& rEvt,
DropTargetHelper& rTargetHelper,
::sd::Window* pTargetWindow,
USHORT nPage,
USHORT nLayer)
{
return DND_ACTION_NONE;
}
// #97766# Re-implement GetScriptType for this view to get correct results
sal_uInt16 OutlineView::GetScriptType() const
{
sal_uInt16 nScriptType = ::sd::View::GetScriptType();
if(pOutliner)
{
OutlinerParaObject* pTempOPObj = pOutliner->CreateParaObject();
if(pTempOPObj)
{
nScriptType = pTempOPObj->GetTextObject().GetScriptType();
delete pTempOPObj;
}
}
return nScriptType;
}
void OutlineView::onUpdateStyleSettings( bool bForceUpdate /* = false */ )
{
const bool bHighContrastMode = Application::GetSettings().GetStyleSettings().GetHighContrastMode() != 0;
if( bForceUpdate || (mbHighContrastMode != bHighContrastMode) )
{
if( pOutliner )
{
pOutliner->ForceAutoColor( bHighContrastMode );
}
mbHighContrastMode = bHighContrastMode;
}
svtools::ColorConfig aColorConfig;
const Color aDocColor( aColorConfig.GetColorValue( svtools::DOCCOLOR ).nColor );
if( bForceUpdate || (maDocColor != aDocColor) )
{
sal_uInt16 nView;
for( nView = 0; nView < MAX_OUTLINERVIEWS; nView++ )
{
if (pOutlinerView[nView] != NULL)
{
pOutlinerView[nView]->SetBackgroundColor( aDocColor );
::Window* pWindow = pOutlinerView[nView]->GetWindow();
if( pWindow )
pWindow->SetBackground( Wallpaper( aDocColor ) );
}
}
if( pOutliner )
pOutliner->SetBackgroundColor( aDocColor );
maDocColor = aDocColor;
}
}
IMPL_LINK( OutlineView, AppEventListenerHdl, void *, EMPTYARG )
{
onUpdateStyleSettings();
return 0;
}
IMPL_LINK(OutlineView, EventMultiplexerListener, ::sd::tools::EventMultiplexerEvent*, pEvent)
{
if (pEvent != NULL)
{
switch (pEvent->meEventId)
{
case tools::EventMultiplexerEvent::EID_CURRENT_PAGE:
SetActualPage(pOutlineViewShell->GetActualPage());
break;
case tools::EventMultiplexerEvent::EID_PAGE_ORDER:
if (pOutliner != NULL && pDoc!=NULL && mnIgnoreCurrentPageChangesLevel==0)
{
if (((pDoc->GetPageCount()-1)%2) == 0)
{
pOutliner->Clear();
FillOutliner();
::sd::Window* pWindow = pOutlineViewShell->GetActiveWindow();
if (pWindow != NULL)
pWindow->Invalidate();
}
}
break;
}
}
return 0;
}
void OutlineView::IgnoreCurrentPageChanges (bool bIgnoreChanges)
{
if (bIgnoreChanges)
mnIgnoreCurrentPageChangesLevel++;
else
mnIgnoreCurrentPageChangesLevel--;
}
OutlineViewPageChangesGuard::OutlineViewPageChangesGuard( OutlineView* pView )
: mpView( pView )
{
if( mpView )
mpView->IgnoreCurrentPageChanges( true );
}
OutlineViewPageChangesGuard::~OutlineViewPageChangesGuard()
{
if( mpView )
mpView->IgnoreCurrentPageChanges( false );
}
} // end of namespace sd