office-gobmx/ucb/source/core/ucbcmds.cxx
Caolán McNamara 95e12eaebc cid#1545789 COPY_INSTEAD_OF_MOVE
and

cid#1545791 COPY_INSTEAD_OF_MOVE
cid#1545800 COPY_INSTEAD_OF_MOVE
cid#1545806 COPY_INSTEAD_OF_MOVE
cid#1545817 COPY_INSTEAD_OF_MOVE
cid#1545832 COPY_INSTEAD_OF_MOVE
cid#1545834 COPY_INSTEAD_OF_MOVE
cid#1545841 COPY_INSTEAD_OF_MOVE
cid#1545848 COPY_INSTEAD_OF_MOVE
cid#1545852 COPY_INSTEAD_OF_MOVE
cid#1545854 COPY_INSTEAD_OF_MOVE
cid#1545864 COPY_INSTEAD_OF_MOVE
cid#1545875 COPY_INSTEAD_OF_MOVE
cid#1545882 COPY_INSTEAD_OF_MOVE
cid#1545900 COPY_INSTEAD_OF_MOVE
cid#1545901 COPY_INSTEAD_OF_MOVE
cid#1545908 COPY_INSTEAD_OF_MOVE
cid#1545921 COPY_INSTEAD_OF_MOVE
cid#1546054 COPY_INSTEAD_OF_MOVE
cid#1546145 COPY_INSTEAD_OF_MOVE
cid#1546146 COPY_INSTEAD_OF_MOVE

Change-Id: I8b23d0457cb293aa0e33593131224c1cdd1d8eb1
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/160545
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolan.mcnamara@collabora.com>
2023-12-10 20:27:43 +01:00

1922 lines
62 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <osl/diagnose.h>
#include <comphelper/propertysequence.hxx>
#include <cppuhelper/implbase.hxx>
#include <cppuhelper/exc_hlp.hxx>
#include <rtl/ustring.hxx>
#include <com/sun/star/uno/XInterface.hpp>
#include <com/sun/star/beans/PropertyState.hpp>
#include <com/sun/star/beans/PropertyValue.hpp>
#include <com/sun/star/beans/XPropertySetInfo.hpp>
#include <com/sun/star/io/IOException.hpp>
#include <com/sun/star/io/Pipe.hpp>
#include <com/sun/star/io/XActiveDataSink.hpp>
#include <com/sun/star/io/XOutputStream.hpp>
#include <com/sun/star/io/XSeekable.hpp>
#include <com/sun/star/lang/IllegalArgumentException.hpp>
#include <com/sun/star/sdbc/SQLException.hpp>
#include <com/sun/star/sdbc/XRow.hpp>
#include <com/sun/star/task/XInteractionHandler.hpp>
#include <com/sun/star/ucb/CommandEnvironment.hpp>
#include <com/sun/star/ucb/CommandFailedException.hpp>
#include <com/sun/star/ucb/ContentInfoAttribute.hpp>
#include <com/sun/star/ucb/GlobalTransferCommandArgument2.hpp>
#include <com/sun/star/ucb/IllegalIdentifierException.hpp>
#include <com/sun/star/ucb/InsertCommandArgument2.hpp>
#include <com/sun/star/ucb/InteractiveBadTransferURLException.hpp>
#include <com/sun/star/ucb/NameClash.hpp>
#include <com/sun/star/ucb/NameClashException.hpp>
#include <com/sun/star/ucb/OpenCommandArgument2.hpp>
#include <com/sun/star/ucb/OpenMode.hpp>
#include <com/sun/star/ucb/TransferInfo2.hpp>
#include <com/sun/star/ucb/UnsupportedCommandException.hpp>
#include <com/sun/star/ucb/UnsupportedNameClashException.hpp>
#include <com/sun/star/ucb/XCommandInfo.hpp>
#include <com/sun/star/ucb/XContentAccess.hpp>
#include <com/sun/star/ucb/XContentCreator.hpp>
#include <com/sun/star/ucb/XDynamicResultSet.hpp>
#include <com/sun/star/ucb/XInteractionSupplyName.hpp>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>
#include <ucbhelper/cancelcommandexecution.hxx>
#include <ucbhelper/simplenameclashresolverequest.hxx>
#include <utility>
#include "ucbcmds.hxx"
#include "ucb.hxx"
using namespace com::sun::star;
namespace
{
// Helper to provide defaults for type and attributes (save some typing)
beans::Property makeProperty(const OUString& n, sal_Int32 h, uno::Type t = {}, sal_Int16 a = {})
{
return { n, h, t, a };
}
// struct TransferCommandContext.
struct TransferCommandContext
{
uno::Reference< uno::XComponentContext > m_xContext;
uno::Reference< ucb::XCommandProcessor > xProcessor;
uno::Reference< ucb::XCommandEnvironment > xEnv;
uno::Reference< ucb::XCommandEnvironment > xOrigEnv;
ucb::GlobalTransferCommandArgument2 aArg;
TransferCommandContext(
uno::Reference< uno::XComponentContext > xContext,
uno::Reference< ucb::XCommandProcessor > _xProcessor,
uno::Reference< ucb::XCommandEnvironment > _xEnv,
uno::Reference< ucb::XCommandEnvironment > _xOrigEnv,
ucb::GlobalTransferCommandArgument2 _aArg )
: m_xContext(std::move( xContext )), xProcessor(std::move( _xProcessor )), xEnv(std::move( _xEnv )),
xOrigEnv(std::move( _xOrigEnv )), aArg(std::move( _aArg )) {}
};
class InteractionHandlerProxy :
public cppu::WeakImplHelper< task::XInteractionHandler >
{
uno::Reference< task::XInteractionHandler > m_xOrig;
public:
explicit InteractionHandlerProxy(
uno::Reference< task::XInteractionHandler > xOrig )
: m_xOrig(std::move( xOrig )) {}
// XInteractionHandler methods.
virtual void SAL_CALL handle(
const uno::Reference< task::XInteractionRequest >& Request ) override;
};
// virtual
void SAL_CALL InteractionHandlerProxy::handle(
const uno::Reference< task::XInteractionRequest >& Request )
{
if ( !m_xOrig.is() )
return;
// Filter unwanted requests by just not handling them.
uno::Any aRequest = Request->getRequest();
// "transfer"
ucb::InteractiveBadTransferURLException aBadTransferURLEx;
if ( aRequest >>= aBadTransferURLEx )
{
return;
}
else
{
// "transfer"
ucb::UnsupportedNameClashException aUnsupportedNameClashEx;
if ( aRequest >>= aUnsupportedNameClashEx )
{
if ( aUnsupportedNameClashEx.NameClash
!= ucb::NameClash::ERROR )
return;
}
else
{
// "insert"
ucb::NameClashException aNameClashEx;
if ( aRequest >>= aNameClashEx )
{
return;
}
else
{
// "transfer"
ucb::UnsupportedCommandException aUnsupportedCommandEx;
if ( aRequest >>= aUnsupportedCommandEx )
{
return;
}
}
}
}
// not filtered; let the original handler do the work.
m_xOrig->handle( Request );
}
class ActiveDataSink : public cppu::WeakImplHelper< io::XActiveDataSink >
{
uno::Reference< io::XInputStream > m_xStream;
public:
// XActiveDataSink methods.
virtual void SAL_CALL setInputStream(
const uno::Reference< io::XInputStream >& aStream ) override;
virtual uno::Reference< io::XInputStream > SAL_CALL getInputStream() override;
};
// virtual
void SAL_CALL ActiveDataSink::setInputStream(
const uno::Reference< io::XInputStream >& aStream )
{
m_xStream = aStream;
}
// virtual
uno::Reference< io::XInputStream > SAL_CALL ActiveDataSink::getInputStream()
{
return m_xStream;
}
class CommandProcessorInfo :
public cppu::WeakImplHelper< ucb::XCommandInfo >
{
uno::Sequence< ucb::CommandInfo > m_xInfo;
public:
CommandProcessorInfo();
// XCommandInfo methods
virtual uno::Sequence< ucb::CommandInfo > SAL_CALL getCommands() override;
virtual ucb::CommandInfo SAL_CALL
getCommandInfoByName( const OUString& Name ) override;
virtual ucb::CommandInfo SAL_CALL
getCommandInfoByHandle( sal_Int32 Handle ) override;
virtual sal_Bool SAL_CALL hasCommandByName( const OUString& Name ) override;
virtual sal_Bool SAL_CALL hasCommandByHandle( sal_Int32 Handle ) override;
};
CommandProcessorInfo::CommandProcessorInfo()
: m_xInfo{
ucb::CommandInfo(
GETCOMMANDINFO_NAME, // Name
GETCOMMANDINFO_HANDLE, // Handle
cppu::UnoType<void>::get() ), // ArgType
ucb::CommandInfo(
GLOBALTRANSFER_NAME, // Name
GLOBALTRANSFER_HANDLE, // Handle
cppu::UnoType<ucb::GlobalTransferCommandArgument>::get() ), // ArgType
ucb::CommandInfo(
CHECKIN_NAME, // Name
CHECKIN_HANDLE, // Handle
cppu::UnoType<ucb::CheckinArgument>::get() ) } // ArgType
{
}
// virtual
uno::Sequence< ucb::CommandInfo > SAL_CALL
CommandProcessorInfo::getCommands()
{
return m_xInfo;
}
// virtual
ucb::CommandInfo SAL_CALL
CommandProcessorInfo::getCommandInfoByName( const OUString& Name )
{
auto pInfo = std::find_if(std::cbegin(m_xInfo), std::cend(m_xInfo),
[&Name](const ucb::CommandInfo& rInfo) { return rInfo.Name == Name; });
if (pInfo != std::cend(m_xInfo))
return *pInfo;
throw ucb::UnsupportedCommandException();
}
// virtual
ucb::CommandInfo SAL_CALL
CommandProcessorInfo::getCommandInfoByHandle( sal_Int32 Handle )
{
auto pInfo = std::find_if(std::cbegin(m_xInfo), std::cend(m_xInfo),
[&Handle](const ucb::CommandInfo& rInfo) { return rInfo.Handle == Handle; });
if (pInfo != std::cend(m_xInfo))
return *pInfo;
throw ucb::UnsupportedCommandException();
}
// virtual
sal_Bool SAL_CALL CommandProcessorInfo::hasCommandByName(
const OUString& Name )
{
return std::any_of(std::cbegin(m_xInfo), std::cend(m_xInfo),
[&Name](const ucb::CommandInfo& rInfo) { return rInfo.Name == Name; });
}
// virtual
sal_Bool SAL_CALL CommandProcessorInfo::hasCommandByHandle( sal_Int32 Handle )
{
return std::any_of(std::cbegin(m_xInfo), std::cend(m_xInfo),
[&Handle](const ucb::CommandInfo& rInfo) { return rInfo.Handle == Handle; });
}
OUString createDesiredName(
const OUString & rSourceURL, const OUString & rNewTitle )
{
OUString aName( rNewTitle );
if ( aName.isEmpty() )
{
// calculate name using source URL
// @@@ It's not guaranteed that slashes contained in the URL are
// actually path separators. This depends on the fact whether the
// URL is hierarchical. Only then the slashes are path separators.
// Therefore this algorithm is not guaranteed to work! But, ATM
// I don't know a better solution. It would have been better to
// have a member for the clashing name in
// UnsupportedNameClashException...
sal_Int32 nLastSlash = rSourceURL.lastIndexOf( '/' );
bool bTrailingSlash = false;
if ( nLastSlash == rSourceURL.getLength() - 1 )
{
nLastSlash = rSourceURL.lastIndexOf( '/', nLastSlash );
bTrailingSlash = true;
}
if ( nLastSlash != -1 )
{
if ( bTrailingSlash )
aName = rSourceURL.copy(
nLastSlash + 1,
rSourceURL.getLength() - nLastSlash - 2 );
else
aName = rSourceURL.copy( nLastSlash + 1 );
}
else
{
aName = rSourceURL;
}
// query, fragment present?
sal_Int32 nPos = aName.indexOf( '?' );
if ( nPos == -1 )
nPos = aName.indexOf( '#' );
if ( nPos != -1 )
aName = aName.copy( 0, nPos );
}
return aName;
}
OUString createDesiredName(
const ucb::GlobalTransferCommandArgument & rArg )
{
return createDesiredName( rArg.SourceURL, rArg.NewTitle );
}
OUString createDesiredName(
const ucb::TransferInfo & rArg )
{
return createDesiredName( rArg.SourceURL, rArg.NewTitle );
}
enum NameClashContinuation { NOT_HANDLED, ABORT, OVERWRITE, NEW_NAME, UNKNOWN };
NameClashContinuation interactiveNameClashResolve(
const uno::Reference< ucb::XCommandEnvironment > & xEnv,
const OUString & rTargetURL,
const OUString & rClashingName,
/* [out] */ uno::Any & rException,
/* [out] */ OUString & rNewName )
{
rtl::Reference< ucbhelper::SimpleNameClashResolveRequest > xRequest(
new ucbhelper::SimpleNameClashResolveRequest(
rTargetURL, // target folder URL
rClashingName
) );
rException = xRequest->getRequest();
if ( xEnv.is() )
{
uno::Reference< task::XInteractionHandler > xIH
= xEnv->getInteractionHandler();
if ( xIH.is() )
{
xIH->handle( xRequest );
rtl::Reference< ucbhelper::InteractionContinuation >
xSelection( xRequest->getSelection() );
if ( xSelection.is() )
{
// Handler handled the request.
uno::Reference< task::XInteractionAbort > xAbort(
xSelection.get(), uno::UNO_QUERY );
if ( xAbort.is() )
{
// Abort.
return ABORT;
}
else
{
uno::Reference<
ucb::XInteractionReplaceExistingData >
xReplace(
xSelection.get(), uno::UNO_QUERY );
if ( xReplace.is() )
{
// Try again: Replace existing data.
return OVERWRITE;
}
else
{
uno::Reference<
ucb::XInteractionSupplyName >
xSupplyName(
xSelection.get(), uno::UNO_QUERY );
if ( xSupplyName.is() )
{
// Try again: Use new name.
rNewName = xRequest->getNewName();
return NEW_NAME;
}
else
{
OSL_FAIL( "Unknown interaction continuation!" );
return UNKNOWN;
}
}
}
}
}
}
return NOT_HANDLED;
}
/// @throws uno::RuntimeException
bool setTitle(
const uno::Reference< ucb::XCommandProcessor > & xCommandProcessor,
const uno::Reference< ucb::XCommandEnvironment > & xEnv,
const OUString & rNewTitle )
{
try
{
uno::Sequence< beans::PropertyValue > aPropValues{ { /* Name */ "Title",
/* Handle */ -1,
/* Value */ uno::Any(rNewTitle),
/* State */ {} } };
ucb::Command aSetPropsCommand(
"setPropertyValues",
-1,
uno::Any( aPropValues ) );
uno::Any aResult
= xCommandProcessor->execute( aSetPropsCommand, 0, xEnv );
uno::Sequence< uno::Any > aErrors;
aResult >>= aErrors;
OSL_ENSURE( aErrors.getLength() == 1,
"getPropertyValues return value invalid!" );
if ( aErrors[ 0 ].hasValue() )
{
// error occurred.
OSL_FAIL( "error setting Title property!" );
return false;
}
}
catch ( uno::RuntimeException const & )
{
throw;
}
catch ( uno::Exception const & )
{
return false;
}
return true;
}
/// @throws uno::Exception
uno::Reference< ucb::XContent > createNew(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XContent > & xTarget,
bool bSourceIsFolder,
bool bSourceIsDocument,
bool bSourceIsLink )
{
// (1) Obtain creatable types from target.
// First, try it using "CreatabeleContentsInfo" property and
// "createNewContent" command -> the "new" way.
uno::Reference< ucb::XCommandProcessor > xCommandProcessorT(
xTarget, uno::UNO_QUERY );
if ( !xCommandProcessorT.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Folder", uno::Any(rContext.aArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_CREATE,
aArgs,
rContext.xOrigEnv,
"Target is no XCommandProcessor!",
rContext.xProcessor );
// Unreachable
}
uno::Sequence< beans::Property > aPropsToObtain{ makeProperty("CreatableContentsInfo", -1) };
ucb::Command aGetPropsCommand(
"getPropertyValues",
-1,
uno::Any( aPropsToObtain ) );
uno::Reference< sdbc::XRow > xRow;
xCommandProcessorT->execute( aGetPropsCommand, 0, rContext.xEnv ) >>= xRow;
uno::Sequence< ucb::ContentInfo > aTypesInfo;
bool bGotTypesInfo = false;
if ( xRow.is() )
{
uno::Any aValue = xRow->getObject(
1, uno::Reference< container::XNameAccess >() );
if ( aValue.hasValue() && ( aValue >>= aTypesInfo ) )
{
bGotTypesInfo = true;
}
}
uno::Reference< ucb::XContentCreator > xCreator;
if ( !bGotTypesInfo )
{
// Second, try it using XContentCreator interface -> the "old" way (not
// providing the chance to supply an XCommandEnvironment.
xCreator.set( xTarget, uno::UNO_QUERY );
if ( !xCreator.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Folder", uno::Any(rContext.aArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_CREATE,
aArgs,
rContext.xOrigEnv,
"Target is no XContentCreator!",
rContext.xProcessor );
// Unreachable
}
aTypesInfo = xCreator->queryCreatableContentsInfo();
}
if ( !aTypesInfo.hasElements() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Folder", uno::Any(rContext.aArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_CREATE,
aArgs,
rContext.xOrigEnv,
"No types creatable!",
rContext.xProcessor );
// Unreachable
}
// (2) Try to find a matching target type for the source object.
std::function<bool(const sal_Int32)> lCompare;
if ( rContext.aArg.Operation == ucb::TransferCommandOperation_LINK )
{
// Create link
lCompare = [](const sal_Int32 nAttribs) { return !!( nAttribs & ucb::ContentInfoAttribute::KIND_LINK ); };
}
else if ( ( rContext.aArg.Operation == ucb::TransferCommandOperation_COPY ) ||
( rContext.aArg.Operation == ucb::TransferCommandOperation_MOVE ) )
{
// Copy / Move
// Is source a link? Create link in target folder then.
if ( bSourceIsLink )
{
lCompare = [](const sal_Int32 nAttribs) { return !!( nAttribs & ucb::ContentInfoAttribute::KIND_LINK ); };
}
else
{
// (not a and not b) or (a and b)
// not( a or b) or (a and b)
lCompare = [bSourceIsFolder, bSourceIsDocument](const sal_Int32 nAttribs) {
return ( bSourceIsFolder == !!( nAttribs & ucb::ContentInfoAttribute::KIND_FOLDER ) )
&& ( bSourceIsDocument == !!( nAttribs & ucb::ContentInfoAttribute::KIND_DOCUMENT ) ) ;
};
}
}
else
{
ucbhelper::cancelCommandExecution(
uno::Any( lang::IllegalArgumentException(
"Unknown transfer operation!",
rContext.xProcessor,
-1 ) ),
rContext.xOrigEnv );
// Unreachable
}
uno::Reference< ucb::XContent > xNew;
auto pTypeInfo = std::find_if(std::cbegin(aTypesInfo), std::cend(aTypesInfo),
[&lCompare](const ucb::ContentInfo& rTypeInfo) { return lCompare(rTypeInfo.Attributes); });
if (pTypeInfo != std::cend(aTypesInfo))
{
// (3) Create a new, empty object of matched type.
if ( !xCreator.is() )
{
// First, try it using "CreatabeleContentsInfo" property and
// "createNewContent" command -> the "new" way.
ucb::Command aCreateNewCommand(
"createNewContent",
-1,
uno::Any( *pTypeInfo ) );
xCommandProcessorT->execute( aCreateNewCommand, 0, rContext.xEnv )
>>= xNew;
}
else
{
// Second, try it using XContentCreator interface -> the "old"
// way (not providing the chance to supply an XCommandEnvironment.
xNew = xCreator->createNewContent( *pTypeInfo );
}
if ( !xNew.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Folder", uno::Any(rContext.aArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_CREATE,
aArgs,
rContext.xOrigEnv,
"createNewContent failed!",
rContext.xProcessor );
// Unreachable
}
}
return xNew;
}
/// @throws uno::Exception
void transferProperties(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XCommandProcessor > & xCommandProcessorS,
const uno::Reference< ucb::XCommandProcessor > & xCommandProcessorN )
{
ucb::Command aGetPropertySetInfoCommand(
"getPropertySetInfo",
-1,
uno::Any() );
uno::Reference< beans::XPropertySetInfo > xInfo;
xCommandProcessorS->execute( aGetPropertySetInfoCommand, 0, rContext.xEnv )
>>= xInfo;
if ( !xInfo.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rContext.aArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Unable to get propertyset info from source object!",
rContext.xProcessor );
// Unreachable
}
uno::Sequence< beans::Property > aAllProps = xInfo->getProperties();
ucb::Command aGetPropsCommand1(
"getPropertyValues",
-1,
uno::Any( aAllProps ) );
uno::Reference< sdbc::XRow > xRow1;
xCommandProcessorS->execute(
aGetPropsCommand1, 0, rContext.xEnv ) >>= xRow1;
if ( !xRow1.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rContext.aArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Unable to get properties from source object!",
rContext.xProcessor );
// Unreachable
}
// Assemble data structure for setPropertyValues command.
// Note: Make room for additional Title and TargetURL too. -> + 2
uno::Sequence< beans::PropertyValue > aPropValues(
aAllProps.getLength() + 2 );
auto pPropValues = aPropValues.getArray();
bool bHasTitle = rContext.aArg.NewTitle.isEmpty();
bool bHasTargetURL = ( rContext.aArg.Operation
!= ucb::TransferCommandOperation_LINK );
sal_Int32 nWritePos = 0;
for ( sal_Int32 m = 0; m < aAllProps.getLength(); ++m )
{
const beans::Property & rCurrProp = aAllProps[ m ];
beans::PropertyValue & rCurrValue = pPropValues[ nWritePos ];
uno::Any aValue;
if ( rCurrProp.Name == "Title" )
{
// Supply new title, if given.
if ( !bHasTitle )
{
bHasTitle = true;
aValue <<= rContext.aArg.NewTitle;
}
}
else if ( rCurrProp.Name == "TargetURL" )
{
// Supply source URL as link target for the new link to create.
if ( !bHasTargetURL )
{
bHasTargetURL = true;
aValue <<= rContext.aArg.SourceURL;
}
}
if ( !aValue.hasValue() )
{
try
{
aValue = xRow1->getObject(
m + 1, uno::Reference< container::XNameAccess >() );
}
catch ( sdbc::SQLException const & )
{
// Argh! But try to bring things to an end. Perhaps the
// mad property is not really important...
}
}
if ( aValue.hasValue() )
{
rCurrValue.Name = rCurrProp.Name;
rCurrValue.Handle = rCurrProp.Handle;
rCurrValue.Value = aValue;
// rCurrValue.State =
nWritePos++;
}
}
// Title needed, but not set yet?
if ( !bHasTitle && !rContext.aArg.NewTitle.isEmpty() )
{
pPropValues[ nWritePos ].Name = "Title";
pPropValues[ nWritePos ].Handle = -1;
pPropValues[ nWritePos ].Value <<= rContext.aArg.NewTitle;
nWritePos++;
}
// TargetURL needed, but not set yet?
if ( !bHasTargetURL && ( rContext.aArg.Operation
== ucb::TransferCommandOperation_LINK ) )
{
pPropValues[ nWritePos ].Name = "TargetURL";
pPropValues[ nWritePos ].Handle = -1;
pPropValues[ nWritePos ].Value <<= rContext.aArg.SourceURL;
nWritePos++;
}
aPropValues.realloc( nWritePos );
// Set properties at new object.
ucb::Command aSetPropsCommand(
"setPropertyValues",
-1,
uno::Any( aPropValues ) );
xCommandProcessorN->execute( aSetPropsCommand, 0, rContext.xEnv );
// @@@ What to do with source props that are not supported by the
// new object? addProperty ???
}
/// @throws uno::Exception
uno::Reference< io::XInputStream > getInputStream(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XCommandProcessor > & xCommandProcessorS )
{
uno::Reference< io::XInputStream > xInputStream;
// (1) Try to get data as XInputStream via XActiveDataSink.
try
{
uno::Reference< io::XActiveDataSink > xSink = new ActiveDataSink;
ucb::OpenCommandArgument2 aArg;
aArg.Mode = ucb::OpenMode::DOCUMENT;
aArg.Priority = 0; // unused
aArg.Sink = xSink;
aArg.Properties = uno::Sequence< beans::Property >( 0 ); // unused
ucb::Command aOpenCommand(
"open",
-1,
uno::Any( aArg ) );
xCommandProcessorS->execute( aOpenCommand, 0, rContext.xEnv );
xInputStream = xSink->getInputStream();
}
catch ( uno::RuntimeException const & )
{
throw;
}
catch ( uno::Exception const & )
{
// will be handled below.
}
if ( !xInputStream.is() )
{
// (2) Try to get data via XOutputStream.
try
{
uno::Reference< io::XOutputStream > xOutputStream( io::Pipe::create(rContext.m_xContext), uno::UNO_QUERY_THROW );
ucb::OpenCommandArgument2 aArg;
aArg.Mode = ucb::OpenMode::DOCUMENT;
aArg.Priority = 0; // unused
aArg.Sink = xOutputStream;
aArg.Properties = uno::Sequence< beans::Property >( 0 );
ucb::Command aOpenCommand(
"open",
-1,
uno::Any( aArg ) );
xCommandProcessorS->execute( aOpenCommand, 0, rContext.xEnv );
xInputStream.set( xOutputStream, uno::UNO_QUERY );
}
catch ( uno::RuntimeException const & )
{
throw;
}
catch ( uno::Exception const & )
{
OSL_FAIL( "unable to get input stream from document!" );
}
}
return xInputStream;
}
/// @throws uno::Exception
uno::Reference< sdbc::XResultSet > getResultSet(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XCommandProcessor > & xCommandProcessorS )
{
uno::Reference< sdbc::XResultSet > xResultSet;
ucb::OpenCommandArgument2 aArg;
aArg.Mode = ucb::OpenMode::ALL;
aArg.Priority = 0; // unused
aArg.Sink = nullptr;
aArg.Properties = { makeProperty("IsFolder", -1 /* unknown */),
makeProperty("IsDocument", -1 /* unknown */),
makeProperty("TargetURL", -1 /* unknown */) };
ucb::Command aOpenCommand( "open",
-1,
uno::Any( aArg ) );
try
{
uno::Reference< ucb::XDynamicResultSet > xSet;
xCommandProcessorS->execute( aOpenCommand, 0, rContext.xEnv ) >>= xSet;
if ( xSet.is() )
xResultSet = xSet->getStaticResultSet();
}
catch ( uno::RuntimeException const & )
{
throw;
}
catch ( uno::Exception const & )
{
OSL_FAIL( "unable to get result set from folder!" );
}
return xResultSet;
}
/// @throws uno::Exception
void handleNameClashRename(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XContent > & xNew,
const uno::Reference<
ucb::XCommandProcessor > & xCommandProcessorN,
const uno::Reference<
ucb::XCommandProcessor > & xCommandProcessorS,
/* [inout] */ uno::Reference< io::XInputStream > & xInputStream )
{
sal_Int32 nTry = 0;
// Obtain old title.
uno::Sequence< beans::Property > aProps{ makeProperty("Title", -1) };
ucb::Command aGetPropsCommand(
"getPropertyValues",
-1,
uno::Any( aProps ) );
uno::Reference< sdbc::XRow > xRow;
xCommandProcessorN->execute( aGetPropsCommand, 0, rContext.xEnv ) >>= xRow;
if ( !xRow.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(xNew->getIdentifier()->getContentIdentifier())}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Unable to get properties from new object!",
rContext.xProcessor );
// Unreachable
}
OUString aOldTitle = xRow->getString( 1 );
if ( aOldTitle.isEmpty() )
{
ucbhelper::cancelCommandExecution(
uno::Any( beans::UnknownPropertyException(
"Unable to get property 'Title' from new object!",
rContext.xProcessor ) ),
rContext.xOrigEnv );
// Unreachable
}
// Some pseudo-intelligence for not destroying file extensions.
OUString aOldTitlePre;
OUString aOldTitlePost;
sal_Int32 nPos = aOldTitle.lastIndexOf( '.' );
if ( nPos != -1 )
{
aOldTitlePre = aOldTitle.copy( 0, nPos );
aOldTitlePost = aOldTitle.copy( nPos );
}
else
aOldTitlePre = aOldTitle;
if ( nPos > 0 )
aOldTitlePre += "_";
bool bContinue = true;
do
{
nTry++;
OUString aNewTitle = aOldTitlePre + OUString::number( nTry ) +
aOldTitlePost;
// Set new title
setTitle( xCommandProcessorN, rContext.xEnv, aNewTitle );
// Retry inserting the content.
try
{
// Previous try may have read from stream. Seek to begin (if
// optional interface XSeekable is supported) or get a new stream.
if ( xInputStream.is() )
{
uno::Reference< io::XSeekable > xSeekable(
xInputStream, uno::UNO_QUERY );
if ( xSeekable.is() )
{
try
{
xSeekable->seek( 0 );
}
catch ( lang::IllegalArgumentException const & )
{
xInputStream.clear();
}
catch ( io::IOException const & )
{
xInputStream.clear();
}
}
else
xInputStream.clear();
if ( !xInputStream.is() )
{
xInputStream
= getInputStream( rContext, xCommandProcessorS );
if ( !xInputStream.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(xNew->getIdentifier()->getContentIdentifier())}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Got no data stream from source!",
rContext.xProcessor );
// Unreachable
}
}
}
ucb::InsertCommandArgument2 aArg;
aArg.Data = xInputStream;
aArg.ReplaceExisting = false;
ucb::Command aInsertCommand(
"insert",
-1,
uno::Any( aArg ) );
xCommandProcessorN->execute( aInsertCommand, 0, rContext.xEnv );
// Success!
bContinue = false;
}
catch ( uno::RuntimeException const & )
{
throw;
}
catch ( uno::Exception const & )
{
}
}
while ( bContinue && ( nTry < 50 ) );
if ( nTry == 50 )
{
ucbhelper::cancelCommandExecution(
uno::Any(
ucb::UnsupportedNameClashException(
"Unable to resolve name clash!",
rContext.xProcessor,
ucb::NameClash::RENAME ) ),
rContext.xOrigEnv );
// Unreachable
}
}
/// @throws uno::Exception
void globalTransfer_(
const TransferCommandContext & rContext,
const uno::Reference< ucb::XContent > & xSource,
const uno::Reference< ucb::XContent > & xTarget,
const uno::Reference< sdbc::XRow > & xSourceProps )
{
// IsFolder: property is required.
bool bSourceIsFolder = xSourceProps->getBoolean( 1 );
if ( !bSourceIsFolder && xSourceProps->wasNull() )
{
ucbhelper::cancelCommandExecution(
uno::Any( beans::UnknownPropertyException(
"Unable to get property 'IsFolder' from source object!",
rContext.xProcessor ) ),
rContext.xOrigEnv );
// Unreachable
}
// IsDocument: property is required.
bool bSourceIsDocument = xSourceProps->getBoolean( 2 );
if ( !bSourceIsDocument && xSourceProps->wasNull() )
{
ucbhelper::cancelCommandExecution(
uno::Any( beans::UnknownPropertyException(
"Unable to get property 'IsDocument' from source object!",
rContext.xProcessor ) ),
rContext.xOrigEnv );
// Unreachable
}
// TargetURL: property is optional.
bool bSourceIsLink = !xSourceProps->getString( 3 ).isEmpty();
// (1) Try to find a matching target type for the source object and
// create a new, empty object of that type.
uno::Reference< ucb::XContent > xNew = createNew( rContext,
xTarget,
bSourceIsFolder,
bSourceIsDocument,
bSourceIsLink );
if ( !xNew.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Folder", uno::Any(rContext.aArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_CREATE,
aArgs,
rContext.xOrigEnv,
"No matching content type at target!",
rContext.xProcessor );
// Unreachable
}
// (2) Transfer property values from source to new object.
uno::Reference< ucb::XCommandProcessor > xCommandProcessorN(
xNew, uno::UNO_QUERY );
if ( !xCommandProcessorN.is() )
{
uno::Any aProps(beans::PropertyValue(
"Uri",
-1,
uno::Any(
xNew->getIdentifier()->
getContentIdentifier()),
beans::PropertyState_DIRECT_VALUE));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_WRITE,
uno::Sequence< uno::Any >(&aProps, 1),
rContext.xOrigEnv,
"New content is not a XCommandProcessor!",
rContext.xProcessor );
// Unreachable
}
// Obtain all properties from source.
uno::Reference< ucb::XCommandProcessor > xCommandProcessorS(
xSource, uno::UNO_QUERY );
if ( !xCommandProcessorS.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rContext.aArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Source content is not a XCommandProcessor!",
rContext.xProcessor );
// Unreachable
}
transferProperties( rContext, xCommandProcessorS, xCommandProcessorN );
// (3) Try to obtain a data stream from source.
uno::Reference< io::XInputStream > xInputStream;
if ( bSourceIsDocument && ( rContext.aArg.Operation
!= ucb::TransferCommandOperation_LINK ) )
xInputStream = getInputStream( rContext, xCommandProcessorS );
// (4) Try to obtain a resultset (children) from source.
uno::Reference< sdbc::XResultSet > xResultSet;
if ( bSourceIsFolder && ( rContext.aArg.Operation
!= ucb::TransferCommandOperation_LINK ) )
xResultSet = getResultSet( rContext, xCommandProcessorS );
// (5) Insert (store) new content.
ucb::InsertCommandArgument2 aArg;
aArg.Data = xInputStream;
aArg.MimeType = rContext.aArg.MimeType;
aArg.DocumentId = rContext.aArg.DocumentId;
switch ( rContext.aArg.NameClash )
{
case ucb::NameClash::OVERWRITE:
aArg.ReplaceExisting = true;
break;
case ucb::NameClash::ERROR:
case ucb::NameClash::RENAME:
case ucb::NameClash::KEEP: // deprecated
case ucb::NameClash::ASK:
aArg.ReplaceExisting = false;
break;
default:
aArg.ReplaceExisting = false;
OSL_FAIL( "Unknown nameclash directive!" );
break;
}
OUString aDesiredName = createDesiredName( rContext.aArg );
bool bRetry;
do
{
bRetry = false;
try
{
ucb::Command aInsertCommand(
"insert",
-1,
uno::Any( aArg ) );
xCommandProcessorN->execute( aInsertCommand, 0, rContext.xEnv );
}
catch ( ucb::UnsupportedNameClashException const & exc )
{
OSL_ENSURE( !aArg.ReplaceExisting,
"BUG: UnsupportedNameClashException not allowed here!" );
if (exc.NameClash != ucb::NameClash::ERROR) {
OSL_FAIL( "BUG: NameClash::ERROR expected!" );
}
// No chance to solve name clashes, because I'm not able to detect
// whether there is one.
throw ucb::UnsupportedNameClashException(
"Unable to resolve name clashes, no chance to detect "
"that there is one!",
rContext.xProcessor,
rContext.aArg.NameClash );
}
catch ( ucb::NameClashException const & )
{
// The 'insert' command throws a NameClashException if the parameter
// ReplaceExisting of the command's argument was set to false and
// there exists a resource with a clashing name in the target folder
// of the operation.
// 'insert' command has no direct support for name clashes other
// than ERROR ( ReplaceExisting == false ) and OVERWRITE
// ( ReplaceExisting == true ). So we have to implement the
// other name clash handling directives on top of the content.
// @@@ 'insert' command should be extended that it accepts a
// name clash handling directive, exactly like 'transfer' command.
switch ( rContext.aArg.NameClash )
{
case ucb::NameClash::OVERWRITE:
{
ucbhelper::cancelCommandExecution(
uno::Any(
ucb::UnsupportedNameClashException(
"BUG: insert + replace == true MUST NOT "
"throw NameClashException.",
rContext.xProcessor,
rContext.aArg.NameClash ) ),
rContext.xOrigEnv );
[[fallthrough]]; // Unreachable
}
case ucb::NameClash::ERROR:
throw;
case ucb::NameClash::RENAME:
{
// "invent" a new valid title.
handleNameClashRename( rContext,
xNew,
xCommandProcessorN,
xCommandProcessorS,
xInputStream );
break;
}
case ucb::NameClash::ASK:
{
uno::Any aExc;
OUString aNewTitle;
NameClashContinuation eCont
= interactiveNameClashResolve(
rContext.xOrigEnv, // always use original environment!
rContext.aArg.TargetURL, // target folder URL
aDesiredName,
aExc,
aNewTitle );
switch ( eCont )
{
case NOT_HANDLED:
// Not handled.
cppu::throwException( aExc );
[[fallthrough]]; // break;
case UNKNOWN:
// Handled, but not clear, how...
// fall through intended.
case ABORT:
throw ucb::CommandFailedException(
"abort requested via interaction "
"handler",
uno::Reference< uno::XInterface >(),
aExc );
// break;
case OVERWRITE:
OSL_ENSURE( !aArg.ReplaceExisting,
"Hu? ReplaceExisting already true?"
);
aArg.ReplaceExisting = true;
bRetry = true;
break;
case NEW_NAME:
{
// set new name -> set "Title" property...
if ( setTitle( xCommandProcessorN,
rContext.xEnv,
aNewTitle ) )
{
// remember suggested title...
aDesiredName = aNewTitle;
// ... and try again.
bRetry = true;
}
else
{
// error setting title. Abort.
throw ucb::CommandFailedException(
"error setting Title property!",
uno::Reference< uno::XInterface >(),
aExc );
}
break;
}
}
OSL_ENSURE( bRetry, "bRetry must be true here!!!" );
}
break;
case ucb::NameClash::KEEP: // deprecated
default:
{
ucbhelper::cancelCommandExecution(
uno::Any(
ucb::UnsupportedNameClashException(
"default action, don't know how to "
"handle name clash",
rContext.xProcessor,
rContext.aArg.NameClash ) ),
rContext.xOrigEnv );
// Unreachable
}
}
}
}
while ( bRetry );
// (6) Process children of source.
if ( xResultSet.is() )
{
try
{
// Iterate over children...
uno::Reference< sdbc::XRow > xChildRow(
xResultSet, uno::UNO_QUERY );
if ( !xChildRow.is() )
{
uno::Any aProps(
beans::PropertyValue(
"Uri",
-1,
uno::Any(rContext.aArg.SourceURL),
beans::PropertyState_DIRECT_VALUE));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
uno::Sequence< uno::Any >(&aProps, 1),
rContext.xOrigEnv,
"Unable to get properties from children of source!",
rContext.xProcessor );
// Unreachable
}
uno::Reference< ucb::XContentAccess > xChildAccess(
xResultSet, uno::UNO_QUERY );
if ( !xChildAccess.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rContext.aArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
rContext.xOrigEnv,
"Unable to get children of source!",
rContext.xProcessor );
// Unreachable
}
if ( xResultSet->first() )
{
ucb::GlobalTransferCommandArgument2 aTransArg(
rContext.aArg.Operation,
OUString(), // SourceURL; filled later
xNew->getIdentifier()
->getContentIdentifier(), // TargetURL
OUString(), // NewTitle;
rContext.aArg.NameClash,
rContext.aArg.MimeType,
rContext.aArg.DocumentId);
TransferCommandContext aSubCtx(
rContext.m_xContext,
rContext.xProcessor,
rContext.xEnv,
rContext.xOrigEnv,
std::move(aTransArg) );
do
{
uno::Reference< ucb::XContent > xChild
= xChildAccess->queryContent();
if ( xChild.is() )
{
// Recursion!
aSubCtx.aArg.SourceURL
= xChild->getIdentifier()->getContentIdentifier();
globalTransfer_( aSubCtx,
xChild,
xNew,
xChildRow );
}
}
while ( xResultSet->next() );
}
}
catch ( sdbc::SQLException const & )
{
}
}
try {
uno::Reference< ucb::XCommandProcessor > xcp(
xTarget, uno::UNO_QUERY );
uno::Any aAny;
uno::Reference< ucb::XCommandInfo > xci;
if(xcp.is())
aAny =
xcp->execute(
ucb::Command(
"getCommandInfo",
-1,
uno::Any()),
0,
rContext.xEnv );
static constexpr OUString cmdName(u"flush"_ustr);
if((aAny >>= xci) && xci->hasCommandByName(cmdName))
xcp->execute(
ucb::Command(
cmdName,
-1,
uno::Any()) ,
0,
rContext.xEnv );
}
catch( uno::Exception const & )
{
}
}
} /* namespace */
// UniversalContentBroker implementation ( XCommandProcessor commands ).
uno::Reference< ucb::XCommandInfo >
UniversalContentBroker::getCommandInfo()
{
return uno::Reference< ucb::XCommandInfo >( new CommandProcessorInfo() );
}
void UniversalContentBroker::globalTransfer(
const ucb::GlobalTransferCommandArgument2 & rArg,
const uno::Reference< ucb::XCommandEnvironment > & xEnv )
{
// Use own command environment with own interaction handler intercepting
// some interaction requests that shall not be handled by the user-supplied
// interaction handler.
uno::Reference< ucb::XCommandEnvironment > xLocalEnv;
if (xEnv.is())
{
xLocalEnv.set( ucb::CommandEnvironment::create(
m_xContext,
new InteractionHandlerProxy( xEnv->getInteractionHandler() ),
xEnv->getProgressHandler() ) );
}
// (1) Try to transfer the content using 'transfer' command.
uno::Reference< ucb::XContent > xTarget;
uno::Reference< ucb::XContentIdentifier > xId
= createContentIdentifier( rArg.TargetURL );
if ( xId.is() )
{
try
{
xTarget = queryContent( xId );
}
catch ( ucb::IllegalIdentifierException const & )
{
}
}
if ( !xTarget.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Can't instantiate target object!",
this );
// Unreachable
}
if ( ( rArg.Operation == ucb::TransferCommandOperation_COPY ) ||
( rArg.Operation == ucb::TransferCommandOperation_MOVE ) )
{
uno::Reference< ucb::XCommandProcessor > xCommandProcessor(
xTarget, uno::UNO_QUERY );
if ( !xCommandProcessor.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Target content is not a XCommandProcessor!",
this );
// Unreachable
}
ucb::TransferInfo2 aTransferArg(
( rArg.Operation
== ucb::TransferCommandOperation_MOVE ), // MoveData
rArg.SourceURL,
rArg.NewTitle,
rArg.NameClash,
rArg.MimeType );
bool bRetry;
do
{
bRetry = false;
try
{
ucb::Command aCommand(
"transfer", // Name
-1, // Handle
uno::Any( aTransferArg ) ); // Argument
xCommandProcessor->execute( aCommand, 0, xLocalEnv );
// Command succeeded. We're done.
return;
}
catch ( ucb::InteractiveBadTransferURLException const & )
{
// Source URL is not supported by target. Try to transfer
// the content "manually".
}
catch ( ucb::UnsupportedCommandException const & )
{
// 'transfer' command is not supported by commandprocessor.
// Try to transfer manually.
}
catch ( ucb::UnsupportedNameClashException const & exc )
{
OSL_ENSURE( aTransferArg.NameClash == exc.NameClash,
"nameclash mismatch!" );
if ( exc.NameClash == ucb::NameClash::ASK )
{
// Try to detect a name clash by invoking "transfer" with
// NameClash::ERROR.
try
{
ucb::TransferInfo2 aTransferArg1(
aTransferArg.MoveData,
aTransferArg.SourceURL,
aTransferArg.NewTitle,
ucb::NameClash::ERROR,
aTransferArg.MimeType );
ucb::Command aCommand1(
"transfer",
-1,
uno::Any( aTransferArg1 ) );
xCommandProcessor->execute( aCommand1, 0, xLocalEnv );
// Command succeeded. We're done.
return;
}
catch ( ucb::UnsupportedNameClashException const & )
{
// No chance to solve name clashes, because I'm not
// able to detect whether there is one.
throw exc; // Not just 'throw;'!
}
catch ( ucb::NameClashException const & )
{
// There's a clash. Use interaction handler to solve it.
uno::Any aExc;
OUString aNewTitle;
NameClashContinuation eCont
= interactiveNameClashResolve(
xEnv, // always use original environment!
rArg.TargetURL, // target folder URL
createDesiredName(
aTransferArg ), // clashing name
aExc,
aNewTitle );
switch ( eCont )
{
case NOT_HANDLED:
// Not handled.
cppu::throwException( aExc );
[[fallthrough]]; // break;
case UNKNOWN:
// Handled, but not clear, how...
// fall through intended.
case ABORT:
throw ucb::CommandFailedException(
"abort requested via interaction "
"handler",
uno::Reference< uno::XInterface >(),
aExc );
// break;
case OVERWRITE:
aTransferArg.NameClash
= ucb::NameClash::OVERWRITE;
bRetry = true;
break;
case NEW_NAME:
aTransferArg.NewTitle = aNewTitle;
bRetry = true;
break;
}
OSL_ENSURE( bRetry, "bRetry must be true here!!!" );
}
}
else
{
throw;
}
}
}
while ( bRetry );
}
// (2) Try to transfer the content "manually".
uno::Reference< ucb::XContent > xSource;
try
{
uno::Reference< ucb::XContentIdentifier > xId2
= createContentIdentifier( rArg.SourceURL );
if ( xId2.is() )
xSource = queryContent( xId2 );
}
catch ( ucb::IllegalIdentifierException const & )
{
// Error handling via "if ( !xSource.is() )" below.
}
if ( !xSource.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Can't instantiate source object!",
this );
// Unreachable
}
uno::Reference< ucb::XCommandProcessor > xCommandProcessor(
xSource, uno::UNO_QUERY );
if ( !xCommandProcessor.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Source content is not a XCommandProcessor!",
this );
// Unreachable
}
// Obtain interesting property values from source...
uno::Sequence< beans::Property > aProps{ makeProperty("IsFolder", -1 /* unknown */),
makeProperty("IsDocument", -1 /* unknown */),
makeProperty("TargetURL", -1 /* unknown */),
makeProperty("BaseURI", -1 /* unknown */) };
ucb::Command aGetPropsCommand(
"getPropertyValues",
-1,
uno::Any( aProps ) );
uno::Reference< sdbc::XRow > xRow;
xCommandProcessor->execute( aGetPropsCommand, 0, xLocalEnv ) >>= xRow;
if ( !xRow.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.SourceURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Unable to get properties from source object!",
this );
// Unreachable
}
TransferCommandContext aTransferCtx(
m_xContext, this, xLocalEnv, xEnv, rArg );
if ( rArg.NewTitle.isEmpty() )
{
// BaseURI: property is optional.
OUString aBaseURI( xRow->getString( 4 ) );
if ( !aBaseURI.isEmpty() )
{
aTransferCtx.aArg.NewTitle
= createDesiredName( aBaseURI, OUString() );
}
}
// Do it!
globalTransfer_( aTransferCtx, xSource, xTarget, xRow );
// (3) Delete source, if operation is MOVE.
if ( rArg.Operation != ucb::TransferCommandOperation_MOVE )
return;
try
{
ucb::Command aCommand(
"delete", // Name
-1, // Handle
uno::Any( true ) ); // Argument
xCommandProcessor->execute( aCommand, 0, xLocalEnv );
}
catch ( uno::Exception const & )
{
OSL_FAIL( "Cannot delete source object!" );
throw;
}
}
uno::Any UniversalContentBroker::checkIn( const ucb::CheckinArgument& rArg,
const uno::Reference< ucb::XCommandEnvironment >& xEnv )
{
uno::Any aRet;
// Use own command environment with own interaction handler intercepting
// some interaction requests that shall not be handled by the user-supplied
// interaction handler.
uno::Reference< ucb::XCommandEnvironment > xLocalEnv;
if (xEnv.is())
{
xLocalEnv.set( ucb::CommandEnvironment::create(
m_xContext,
new InteractionHandlerProxy( xEnv->getInteractionHandler() ),
xEnv->getProgressHandler() ) );
}
uno::Reference< ucb::XContent > xTarget;
uno::Reference< ucb::XContentIdentifier > xId
= createContentIdentifier( rArg.TargetURL );
if ( xId.is() )
{
try
{
xTarget = queryContent( xId );
}
catch ( ucb::IllegalIdentifierException const & )
{
}
}
if ( !xTarget.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Can't instantiate target object!",
this );
// Unreachable
}
uno::Reference< ucb::XCommandProcessor > xCommandProcessor(
xTarget, uno::UNO_QUERY );
if ( !xCommandProcessor.is() )
{
uno::Sequence<uno::Any> aArgs(comphelper::InitAnyPropertySequence(
{
{"Uri", uno::Any(rArg.TargetURL)}
}));
ucbhelper::cancelCommandExecution(
ucb::IOErrorCode_CANT_READ,
aArgs,
xEnv,
"Target content is not a XCommandProcessor!",
this );
// Unreachable
}
try
{
ucb::Command aCommand(
"checkin", -1,
uno::Any( rArg ) );
aRet = xCommandProcessor->execute( aCommand, 0, xLocalEnv );
}
catch ( ucb::UnsupportedCommandException const & )
{
// 'checkin' command is not supported by commandprocessor:
// ignore.
}
return aRet;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */