office-gobmx/vcl/source/outdev/line.cxx
Chris Sherlock 9a89946c95 VCL: Move line functions into state areas
Change-Id: I4a92c66892fbb9687b9e7c521c770150b75229b0
2014-04-28 22:27:11 +10:00

285 lines
8.9 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <numeric>
#include <vcl/virdev.hxx>
#include <vcl/outdev.hxx>
#include <salgdi.hxx>
#include "outdata.hxx"
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <basegfx/polygon/b2dpolypolygontools.hxx>
#include <basegfx/polygon/b2dlinegeometry.hxx>
void OutputDevice::DrawLine( const Point& rStartPt, const Point& rEndPt,
const LineInfo& rLineInfo )
{
if ( rLineInfo.IsDefault() )
{
DrawLine( rStartPt, rEndPt );
return;
}
if ( mpMetaFile )
mpMetaFile->AddAction( new MetaLineAction( rStartPt, rEndPt, rLineInfo ) );
if ( !IsDeviceOutputNecessary() || !mbLineColor || ( LINE_NONE == rLineInfo.GetStyle() ) || ImplIsRecordLayout() )
return;
if( !mpGraphics )
{
if ( !AcquireGraphics() )
return;
}
if ( mbInitClipRegion )
InitClipRegion();
if ( mbOutputClipped )
return;
const Point aStartPt( ImplLogicToDevicePixel( rStartPt ) );
const Point aEndPt( ImplLogicToDevicePixel( rEndPt ) );
const LineInfo aInfo( ImplLogicToDevicePixel( rLineInfo ) );
const bool bDashUsed(LINE_DASH == aInfo.GetStyle());
const bool bLineWidthUsed(aInfo.GetWidth() > 1);
if ( mbInitLineColor )
InitLineColor();
if(bDashUsed || bLineWidthUsed)
{
basegfx::B2DPolygon aLinePolygon;
aLinePolygon.append(basegfx::B2DPoint(aStartPt.X(), aStartPt.Y()));
aLinePolygon.append(basegfx::B2DPoint(aEndPt.X(), aEndPt.Y()));
PaintLineGeometryWithEvtlExpand(aInfo, basegfx::B2DPolyPolygon(aLinePolygon));
}
else
{
mpGraphics->DrawLine( aStartPt.X(), aStartPt.Y(), aEndPt.X(), aEndPt.Y(), this );
}
if( mpAlphaVDev )
mpAlphaVDev->DrawLine( rStartPt, rEndPt, rLineInfo );
}
void OutputDevice::DrawLine( const Point& rStartPt, const Point& rEndPt )
{
if ( mpMetaFile )
mpMetaFile->AddAction( new MetaLineAction( rStartPt, rEndPt ) );
if ( !IsDeviceOutputNecessary() || !mbLineColor || ImplIsRecordLayout() )
return;
if ( !mpGraphics )
{
if ( !AcquireGraphics() )
return;
}
if ( mbInitClipRegion )
InitClipRegion();
if ( mbOutputClipped )
return;
if ( mbInitLineColor )
InitLineColor();
// #i101598# support AA and snap for lines, too
if((mnAntialiasing & ANTIALIASING_ENABLE_B2DDRAW)
&& mpGraphics->supportsOperation(OutDevSupport_B2DDraw)
&& ROP_OVERPAINT == GetRasterOp()
&& IsLineColor())
{
// at least transform with double precision to device coordinates; this will
// avoid pixel snap of single, appended lines
const basegfx::B2DHomMatrix aTransform(ImplGetDeviceTransformation());
const basegfx::B2DVector aB2DLineWidth( 1.0, 1.0 );
basegfx::B2DPolygon aB2DPolyLine;
aB2DPolyLine.append(basegfx::B2DPoint(rStartPt.X(), rStartPt.Y()));
aB2DPolyLine.append(basegfx::B2DPoint(rEndPt.X(), rEndPt.Y()));
aB2DPolyLine.transform( aTransform );
if(mnAntialiasing & ANTIALIASING_PIXELSNAPHAIRLINE)
{
aB2DPolyLine = basegfx::tools::snapPointsOfHorizontalOrVerticalEdges(aB2DPolyLine);
}
if( mpGraphics->DrawPolyLine( aB2DPolyLine, 0.0, aB2DLineWidth, basegfx::B2DLINEJOIN_NONE, css::drawing::LineCap_BUTT, this))
{
return;
}
}
const Point aStartPt(ImplLogicToDevicePixel(rStartPt));
const Point aEndPt(ImplLogicToDevicePixel(rEndPt));
mpGraphics->DrawLine( aStartPt.X(), aStartPt.Y(), aEndPt.X(), aEndPt.Y(), this );
if( mpAlphaVDev )
mpAlphaVDev->DrawLine( rStartPt, rEndPt );
}
void OutputDevice::PaintLineGeometryWithEvtlExpand(
const LineInfo& rInfo,
basegfx::B2DPolyPolygon aLinePolyPolygon)
{
const bool bTryAA((mnAntialiasing & ANTIALIASING_ENABLE_B2DDRAW)
&& mpGraphics->supportsOperation(OutDevSupport_B2DDraw)
&& ROP_OVERPAINT == GetRasterOp()
&& IsLineColor());
basegfx::B2DPolyPolygon aFillPolyPolygon;
const bool bDashUsed(LINE_DASH == rInfo.GetStyle());
const bool bLineWidthUsed(rInfo.GetWidth() > 1);
if(bDashUsed && aLinePolyPolygon.count())
{
::std::vector< double > fDotDashArray;
const double fDashLen(rInfo.GetDashLen());
const double fDotLen(rInfo.GetDotLen());
const double fDistance(rInfo.GetDistance());
for(sal_uInt16 a(0); a < rInfo.GetDashCount(); a++)
{
fDotDashArray.push_back(fDashLen);
fDotDashArray.push_back(fDistance);
}
for(sal_uInt16 b(0); b < rInfo.GetDotCount(); b++)
{
fDotDashArray.push_back(fDotLen);
fDotDashArray.push_back(fDistance);
}
const double fAccumulated(::std::accumulate(fDotDashArray.begin(), fDotDashArray.end(), 0.0));
if(fAccumulated > 0.0)
{
basegfx::B2DPolyPolygon aResult;
for(sal_uInt32 c(0); c < aLinePolyPolygon.count(); c++)
{
basegfx::B2DPolyPolygon aLineTraget;
basegfx::tools::applyLineDashing(
aLinePolyPolygon.getB2DPolygon(c),
fDotDashArray,
&aLineTraget);
aResult.append(aLineTraget);
}
aLinePolyPolygon = aResult;
}
}
if(bLineWidthUsed && aLinePolyPolygon.count())
{
const double fHalfLineWidth((rInfo.GetWidth() * 0.5) + 0.5);
if(aLinePolyPolygon.areControlPointsUsed())
{
// #i110768# When area geometry has to be created, do not
// use the fallback bezier decomposition inside createAreaGeometry,
// but one that is at least as good as ImplSubdivideBezier was.
// There, Polygon::AdaptiveSubdivide was used with default parameter
// 1.0 as quality index.
aLinePolyPolygon = basegfx::tools::adaptiveSubdivideByDistance(aLinePolyPolygon, 1.0);
}
for(sal_uInt32 a(0); a < aLinePolyPolygon.count(); a++)
{
aFillPolyPolygon.append(basegfx::tools::createAreaGeometry(
aLinePolyPolygon.getB2DPolygon(a),
fHalfLineWidth,
rInfo.GetLineJoin(),
rInfo.GetLineCap()));
}
aLinePolyPolygon.clear();
}
GDIMetaFile* pOldMetaFile = mpMetaFile;
mpMetaFile = NULL;
if(aLinePolyPolygon.count())
{
for(sal_uInt32 a(0); a < aLinePolyPolygon.count(); a++)
{
const basegfx::B2DPolygon aCandidate(aLinePolyPolygon.getB2DPolygon(a));
bool bDone(false);
if(bTryAA)
{
bDone = mpGraphics->DrawPolyLine( aCandidate, 0.0, basegfx::B2DVector(1.0,1.0), basegfx::B2DLINEJOIN_NONE, css::drawing::LineCap_BUTT, this);
}
if(!bDone)
{
const Polygon aPolygon(aCandidate);
mpGraphics->DrawPolyLine(aPolygon.GetSize(), (const SalPoint*)aPolygon.GetConstPointAry(), this);
}
}
}
if(aFillPolyPolygon.count())
{
const Color aOldLineColor( maLineColor );
const Color aOldFillColor( maFillColor );
SetLineColor();
InitLineColor();
SetFillColor( aOldLineColor );
InitFillColor();
bool bDone(false);
if(bTryAA)
{
bDone = mpGraphics->DrawPolyPolygon(aFillPolyPolygon, 0.0, this);
}
if(!bDone)
{
for(sal_uInt32 a(0); a < aFillPolyPolygon.count(); a++)
{
Polygon aPolygon(aFillPolyPolygon.getB2DPolygon(a));
// need to subdivide, mpGraphics->DrawPolygon ignores curves
aPolygon.AdaptiveSubdivide(aPolygon);
mpGraphics->DrawPolygon(aPolygon.GetSize(), (const SalPoint*)aPolygon.GetConstPointAry(), this);
}
}
SetFillColor( aOldFillColor );
SetLineColor( aOldLineColor );
}
mpMetaFile = pOldMetaFile;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */