office-gobmx/svx/source/svdraw/svdedtv1.cxx
Noel Grandin 4d863fd8e3 tdf#54857 elide more dynamic_cast
Change-Id: I42bef355eeef15e3733a5ee57b0569887cfa5e84
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/142183
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2022-11-02 20:30:29 +01:00

2019 lines
67 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include <editeng/eeitem.hxx>
#include <math.h>
#include <svl/itemiter.hxx>
#include <svl/whiter.hxx>
#include <tools/bigint.hxx>
#include <vcl/svapp.hxx>
#include <vcl/weld.hxx>
#include <getallcharpropids.hxx>
#include <svx/dialmgr.hxx>
#include <svx/svditer.hxx>
#include <svx/strings.hrc>
#include <AffineMatrixItem.hxx>
#include <svx/e3dsceneupdater.hxx>
#include <svx/obj3d.hxx>
#include <svx/rectenum.hxx>
#include <svx/sdr/contact/viewcontact.hxx>
#include <svx/sdooitm.hxx>
#include <svx/sderitm.hxx>
#include <svx/sdtagitm.hxx>
#include <svx/svdedtv.hxx>
#include <svx/svdetc.hxx>
#include <svx/svdopath.hxx>
#include <svx/svdpage.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svdtrans.hxx>
#include <svx/svdundo.hxx>
#include <svx/svxids.hrc>
#include <sxallitm.hxx>
#include <sxmovitm.hxx>
#include <sxreaitm.hxx>
#include <sxreoitm.hxx>
#include <sxroaitm.hxx>
#include <sxrooitm.hxx>
#include <sxsalitm.hxx>
#include <sxsoitm.hxx>
#include <sxtraitm.hxx>
#include <svx/xlnedwit.hxx>
#include <svx/xlnstwit.hxx>
#include <svx/xlnwtit.hxx>
#include <svx/xlnclit.hxx>
#include <svx/xflclit.hxx>
#include <svx/xlntrit.hxx>
#include <svx/xfltrit.hxx>
#include <svx/sdprcitm.hxx>
#include <LibreOfficeKit/LibreOfficeKitEnums.h>
#include <rtl/ustring.hxx>
#include <sfx2/viewsh.hxx>
#include <comphelper/lok.hxx>
#include <osl/diagnose.h>
// EditView
void SdrEditView::SetMarkedObjRect(const tools::Rectangle& rRect)
{
DBG_ASSERT(!rRect.IsEmpty(),"SetMarkedObjRect() with an empty Rect does not make sense.");
if (rRect.IsEmpty()) return;
const size_t nCount=GetMarkedObjectCount();
if (nCount==0) return;
tools::Rectangle aR0(GetMarkedObjRect());
DBG_ASSERT(!aR0.IsEmpty(),"SetMarkedObjRect(): GetMarkedObjRect() is empty.");
if (aR0.IsEmpty()) return;
tools::Long x0=aR0.Left();
tools::Long y0=aR0.Top();
tools::Long w0=aR0.Right()-x0;
tools::Long h0=aR0.Bottom()-y0;
tools::Long x1=rRect.Left();
tools::Long y1=rRect.Top();
tools::Long w1=rRect.Right()-x1;
tools::Long h1=rRect.Bottom()-y1;
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
BegUndo(ImpGetDescriptionString(STR_EditPosSize));
}
for (size_t nm=0; nm<nCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
tools::Rectangle aR1(pO->GetSnapRect());
if (!aR1.IsEmpty())
{
if (aR1==aR0)
{
aR1=rRect;
}
else
{ // transform aR1 to aR0 after rRect
aR1.Move(-x0,-y0);
BigInt l(aR1.Left());
BigInt r(aR1.Right());
BigInt t(aR1.Top());
BigInt b(aR1.Bottom());
if (w0!=0) {
l*=w1; l/=w0;
r*=w1; r/=w0;
} else {
l=0; r=w1;
}
if (h0!=0) {
t*=h1; t/=h0;
b*=h1; b/=h0;
} else {
t=0; b=h1;
}
aR1.SetLeft(tools::Long(l) );
aR1.SetRight(tools::Long(r) );
aR1.SetTop(tools::Long(t) );
aR1.SetBottom(tools::Long(b) );
aR1.Move(x1,y1);
}
pO->SetSnapRect(aR1);
} else {
OSL_FAIL("SetMarkedObjRect(): pObj->GetSnapRect() returns empty Rect");
}
}
if( bUndo )
EndUndo();
}
std::vector< std::unique_ptr<SdrUndoAction> > SdrEditView::CreateConnectorUndo( const SdrObject& rO )
{
std::vector< std::unique_ptr<SdrUndoAction> > vUndoActions;
if ( rO.GetBroadcaster() )
{
const SdrPage* pPage = rO.getSdrPageFromSdrObject();
if ( pPage )
{
SdrObjListIter aIter(pPage, SdrIterMode::DeepWithGroups);
while( aIter.IsMore() )
{
SdrObject* pPartObj = aIter.Next();
if ( dynamic_cast<const SdrEdgeObj*>( pPartObj) != nullptr )
{
if ( ( pPartObj->GetConnectedNode( false ) == &rO ) ||
( pPartObj->GetConnectedNode( true ) == &rO ) )
{
vUndoActions.push_back( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject( *pPartObj ) );
}
}
}
}
}
return vUndoActions;
}
void SdrEditView::AddUndoActions( std::vector< std::unique_ptr<SdrUndoAction> > aUndoActions )
{
for (auto & rAction : aUndoActions)
AddUndo( std::move(rAction) );
}
void SdrEditView::MoveMarkedObj(const Size& rSiz, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr(SvxResId(STR_EditMove));
if (bCopy)
aStr += SvxResId(STR_EditWithCopy);
// needs its own UndoGroup because of its parameters
BegUndo(aStr,GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Move);
}
if (bCopy)
CopyMarkedObj();
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
{
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pO,rSiz));
}
pO->Move(rSiz);
}
if( bUndo )
EndUndo();
}
void SdrEditView::ResizeMarkedObj(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr {ImpGetDescriptionString(STR_EditResize)};
if (bCopy)
aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
{
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
}
pO->Resize(rRef,xFact,yFact);
}
if( bUndo )
EndUndo();
}
void SdrEditView::ResizeMultMarkedObj(const Point& rRef,
const Fraction& xFact,
const Fraction& yFact,
const bool bWdh,
const bool bHgt)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
BegUndo(ImpGetDescriptionString(STR_EditResize));
}
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
{
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
}
Fraction aFrac(1,1);
if (bWdh && xFact.IsValid() && bHgt && yFact.IsValid())
pO->Resize(rRef, xFact, yFact);
else if (bWdh && xFact.IsValid())
pO->Resize(rRef, xFact, aFrac);
else if (bHgt && yFact.IsValid())
pO->Resize(rRef, aFrac, yFact);
}
if( bUndo )
EndUndo();
}
Degree100 SdrEditView::GetMarkedObjRotate() const
{
Degree100 nRetval(0);
if(GetMarkedObjectCount())
{
SdrMark* pM = GetSdrMarkByIndex(0);
SdrObject* pO = pM->GetMarkedSdrObj();
nRetval = pO->GetRotateAngle();
}
return nRetval;
}
void SdrEditView::RotateMarkedObj(const Point& rRef, Degree100 nAngle, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr {ImpGetDescriptionString(STR_EditRotate)};
if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
double nSin = sin(toRadians(nAngle));
double nCos = cos(toRadians(nAngle));
const size_t nMarkCount(GetMarkedObjectCount());
if(nMarkCount)
{
std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
for(size_t nm = 0; nm < nMarkCount; ++nm)
{
SdrMark* pM = GetSdrMarkByIndex(nm);
SdrObject* pO = pM->GetMarkedSdrObj();
if( bUndo )
{
// extra undo actions for changed connector which now may hold its laid out path (SJ)
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
}
// set up a scene updater if object is a 3d object
if(DynCastE3dObject(pO))
{
aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
}
pO->Rotate(rRef,nAngle,nSin,nCos);
}
// fire scene updaters
while(!aUpdaters.empty())
{
delete aUpdaters.back();
aUpdaters.pop_back();
}
}
if( bUndo )
EndUndo();
}
void SdrEditView::MirrorMarkedObj(const Point& rRef1, const Point& rRef2, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr;
Point aDif(rRef2-rRef1);
if (aDif.X()==0)
aStr = ImpGetDescriptionString(STR_EditMirrorHori);
else if (aDif.Y()==0)
aStr = ImpGetDescriptionString(STR_EditMirrorVert);
else if (std::abs(aDif.X()) == std::abs(aDif.Y()))
aStr = ImpGetDescriptionString(STR_EditMirrorDiag);
else
aStr = ImpGetDescriptionString(STR_EditMirrorFree);
if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
const size_t nMarkCount(GetMarkedObjectCount());
if(nMarkCount)
{
std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
for(size_t nm = 0; nm < nMarkCount; ++nm)
{
SdrMark* pM = GetSdrMarkByIndex(nm);
SdrObject* pO = pM->GetMarkedSdrObj();
if( bUndo )
{
// extra undo actions for changed connector which now may hold its laid out path (SJ)
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
}
// set up a scene updater if object is a 3d object
if(DynCastE3dObject(pO))
{
aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
}
pO->Mirror(rRef1,rRef2);
}
// fire scene updaters
while(!aUpdaters.empty())
{
delete aUpdaters.back();
aUpdaters.pop_back();
}
}
if( bUndo )
EndUndo();
}
void SdrEditView::MirrorMarkedObjHorizontal()
{
Point aCenter(GetMarkedObjRect().Center());
Point aPt2(aCenter);
aPt2.AdjustY( 1 );
MirrorMarkedObj(aCenter,aPt2);
}
void SdrEditView::MirrorMarkedObjVertical()
{
Point aCenter(GetMarkedObjRect().Center());
Point aPt2(aCenter);
aPt2.AdjustX( 1 );
MirrorMarkedObj(aCenter,aPt2);
}
Degree100 SdrEditView::GetMarkedObjShear() const
{
bool b1st=true;
bool bOk=true;
Degree100 nAngle(0);
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount && bOk; ++nm) {
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
Degree100 nAngle2=pO->GetShearAngle();
if (b1st) nAngle=nAngle2;
else if (nAngle2!=nAngle) bOk=false;
b1st=false;
}
if (nAngle>SDRMAXSHEAR) nAngle=SDRMAXSHEAR;
if (nAngle<-SDRMAXSHEAR) nAngle=-SDRMAXSHEAR;
if (!bOk) nAngle=0_deg100;
return nAngle;
}
void SdrEditView::ShearMarkedObj(const Point& rRef, Degree100 nAngle, bool bVShear, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr {ImpGetDescriptionString(STR_EditShear)};
if (bCopy)
aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
double nTan = tan(toRadians(nAngle));
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
{
AddUndoActions( CreateConnectorUndo( *pO ) );
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
}
pO->Shear(rRef,nAngle,nTan,bVShear);
}
if( bUndo )
EndUndo();
}
void SdrEditView::ImpCrookObj(SdrObject* pO, const Point& rRef, const Point& rRad,
SdrCrookMode eMode, bool bVertical, bool bNoContortion, bool bRotate, const tools::Rectangle& rMarkRect)
{
SdrPathObj* pPath=dynamic_cast<SdrPathObj*>( pO );
bool bDone = false;
if(pPath!=nullptr && !bNoContortion)
{
XPolyPolygon aXPP(pPath->GetPathPoly());
switch (eMode) {
case SdrCrookMode::Rotate : CrookRotatePoly (aXPP,rRef,rRad,bVertical); break;
case SdrCrookMode::Slant : CrookSlantPoly (aXPP,rRef,rRad,bVertical); break;
case SdrCrookMode::Stretch: CrookStretchPoly(aXPP,rRef,rRad,bVertical,rMarkRect); break;
} // switch
pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
bDone = true;
}
if(!bDone && !pPath && pO->IsPolyObj() && 0 != pO->GetPointCount())
{
// for PolyObj's, but NOT for SdrPathObj's, e.g. the measurement object
sal_uInt32 nPointCount(pO->GetPointCount());
XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
sal_uInt32 nPtNum;
for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
{
Point aPt(pO->GetPoint(nPtNum));
aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
}
switch (eMode)
{
case SdrCrookMode::Rotate : CrookRotatePoly (aXP,rRef,rRad,bVertical); break;
case SdrCrookMode::Slant : CrookSlantPoly (aXP,rRef,rRad,bVertical); break;
case SdrCrookMode::Stretch: CrookStretchPoly(aXP,rRef,rRad,bVertical,rMarkRect); break;
}
for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
{
// broadcasting could be optimized here, but for the
// current two points of the measurement object, it's fine
pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
}
bDone = true;
}
if(bDone)
return;
// for all others or if bNoContortion
Point aCtr0(pO->GetSnapRect().Center());
Point aCtr1(aCtr0);
bool bRotOk(false);
double nSin(0.0), nCos(1.0);
double nAngle(0.0);
if(0 != rRad.X() && 0 != rRad.Y())
{
bRotOk = bRotate;
switch (eMode)
{
case SdrCrookMode::Rotate : nAngle=CrookRotateXPoint (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical); bRotOk=bRotate; break;
case SdrCrookMode::Slant : nAngle=CrookSlantXPoint (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical); break;
case SdrCrookMode::Stretch: nAngle=CrookStretchXPoint(aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical,rMarkRect); break;
}
}
aCtr1 -= aCtr0;
if(bRotOk)
pO->Rotate(aCtr0, Degree100(FRound(basegfx::rad2deg<100>(nAngle))), nSin, nCos);
pO->Move(Size(aCtr1.X(),aCtr1.Y()));
}
void SdrEditView::CrookMarkedObj(const Point& rRef, const Point& rRad, SdrCrookMode eMode,
bool bVertical, bool bNoContortion, bool bCopy)
{
tools::Rectangle aMarkRect(GetMarkedObjRect());
const bool bUndo = IsUndoEnabled();
bool bRotate=bNoContortion && eMode==SdrCrookMode::Rotate && IsRotateAllowed();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr {ImpGetDescriptionString(bNoContortion ? STR_EditCrook : STR_EditCrookContortion)};
if (bCopy)
aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
const SdrObjList* pOL=pO->GetSubList();
if (bNoContortion || pOL==nullptr) {
ImpCrookObj(pO,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
} else {
SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
while (aIter.IsMore()) {
SdrObject* pO1=aIter.Next();
ImpCrookObj(pO1,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
}
}
}
if( bUndo )
EndUndo();
}
void SdrEditView::ImpDistortObj(SdrObject* pO, const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion)
{
SdrPathObj* pPath = dynamic_cast<SdrPathObj*>( pO );
if(!bNoContortion && pPath)
{
XPolyPolygon aXPP(pPath->GetPathPoly());
aXPP.Distort(rRef, rDistortedRect);
pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
}
else if(pO->IsPolyObj())
{
// e. g. for the measurement object
sal_uInt32 nPointCount(pO->GetPointCount());
XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
sal_uInt32 nPtNum;
for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
{
Point aPt(pO->GetPoint(nPtNum));
aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
}
aXP.Distort(rRef, rDistortedRect);
for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
{
// broadcasting could be optimized here, but for the
// current two points of the measurement object it's fine
pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
}
}
}
void SdrEditView::DistortMarkedObj(const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion, bool bCopy)
{
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr {ImpGetDescriptionString(STR_EditDistort)};
if (bCopy)
aStr+=SvxResId(STR_EditWithCopy);
BegUndo(aStr);
}
if (bCopy)
CopyMarkedObj();
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pO=pM->GetMarkedSdrObj();
if( bUndo )
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
tools::Rectangle aRefRect(rRef);
const SdrObjList* pOL=pO->GetSubList();
if (bNoContortion || pOL==nullptr) {
ImpDistortObj(pO,aRefRect,rDistortedRect,bNoContortion);
} else {
SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
while (aIter.IsMore()) {
SdrObject* pO1=aIter.Next();
ImpDistortObj(pO1,aRefRect,rDistortedRect,bNoContortion);
}
}
}
if( bUndo )
EndUndo();
}
void SdrEditView::SetNotPersistAttrToMarked(const SfxItemSet& rAttr)
{
// bReplaceAll has no effect here
tools::Rectangle aAllSnapRect(GetMarkedObjRect());
if (const SdrTransformRef1XItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF1X))
{
tools::Long n = pPoolItem->GetValue();
SetRef1(Point(n,GetRef1().Y()));
}
if (const SdrTransformRef1YItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF1Y))
{
tools::Long n = pPoolItem->GetValue();
SetRef1(Point(GetRef1().X(),n));
}
if (const SdrTransformRef2XItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF2X))
{
tools::Long n = pPoolItem->GetValue();
SetRef2(Point(n,GetRef2().Y()));
}
if (const SdrTransformRef2YItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF2Y))
{
tools::Long n = pPoolItem->GetValue();
SetRef2(Point(GetRef2().X(),n));
}
tools::Long nAllPosX=0; bool bAllPosX=false;
tools::Long nAllPosY=0; bool bAllPosY=false;
tools::Long nAllWdt=0; bool bAllWdt=false;
tools::Long nAllHgt=0; bool bAllHgt=false;
bool bDoIt=false;
if (const SdrAllPositionXItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLPOSITIONX))
{
nAllPosX = pPoolItem->GetValue();
bAllPosX=true; bDoIt=true;
}
if (const SdrAllPositionYItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLPOSITIONY))
{
nAllPosY = pPoolItem->GetValue();
bAllPosY=true; bDoIt=true;
}
if (const SdrAllSizeWidthItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLSIZEWIDTH))
{
nAllWdt = pPoolItem->GetValue();
bAllWdt=true; bDoIt=true;
}
if (const SdrAllSizeHeightItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLSIZEHEIGHT))
{
nAllHgt = pPoolItem->GetValue();
bAllHgt=true; bDoIt=true;
}
if (bDoIt) {
tools::Rectangle aRect(aAllSnapRect); // TODO: change this for PolyPt's and GluePt's!!!
if (bAllPosX) aRect.Move(nAllPosX-aRect.Left(),0);
if (bAllPosY) aRect.Move(0,nAllPosY-aRect.Top());
if (bAllWdt) aRect.SetRight(aAllSnapRect.Left()+nAllWdt );
if (bAllHgt) aRect.SetBottom(aAllSnapRect.Top()+nAllHgt );
SetMarkedObjRect(aRect);
}
if (const SdrResizeXAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_RESIZEXALL))
{
Fraction aXFact = pPoolItem->GetValue();
ResizeMarkedObj(aAllSnapRect.TopLeft(),aXFact,Fraction(1,1));
}
if (const SdrResizeYAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_RESIZEYALL))
{
Fraction aYFact = pPoolItem->GetValue();
ResizeMarkedObj(aAllSnapRect.TopLeft(),Fraction(1,1),aYFact);
}
if (const SdrRotateAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ROTATEALL))
{
Degree100 nAngle = pPoolItem->GetValue();
RotateMarkedObj(aAllSnapRect.Center(),nAngle);
}
if (const SdrHorzShearAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_HORZSHEARALL))
{
Degree100 nAngle = pPoolItem->GetValue();
ShearMarkedObj(aAllSnapRect.Center(),nAngle);
}
if (const SdrVertShearAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_VERTSHEARALL))
{
Degree100 nAngle = pPoolItem->GetValue();
ShearMarkedObj(aAllSnapRect.Center(),nAngle,true);
}
const bool bUndo = IsUndoEnabled();
// TODO: check if WhichRange is necessary.
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
const SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
if( bUndo )
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
pObj->ApplyNotPersistAttr(rAttr);
}
}
void SdrEditView::MergeNotPersistAttrFromMarked(SfxItemSet& rAttr) const
{
// TODO: Take into account the origin and PvPos.
tools::Rectangle aAllSnapRect(GetMarkedObjRect()); // TODO: change this for PolyPt's and GluePt's!!!
tools::Long nAllSnapPosX=aAllSnapRect.Left();
tools::Long nAllSnapPosY=aAllSnapRect.Top();
tools::Long nAllSnapWdt=aAllSnapRect.GetWidth()-1;
tools::Long nAllSnapHgt=aAllSnapRect.GetHeight()-1;
// TODO: could go into CheckPossibilities
bool bMovProtect = false, bMovProtectDC = false;
bool bSizProtect = false, bSizProtectDC = false;
bool bPrintable = true, bPrintableDC = false;
bool bVisible = true, bVisibleDC = false;
SdrLayerID nLayerId(0);
bool bLayerDC=false;
tools::Long nSnapPosX=0; bool bSnapPosXDC=false;
tools::Long nSnapPosY=0; bool bSnapPosYDC=false;
tools::Long nSnapWdt=0; bool bSnapWdtDC=false;
tools::Long nSnapHgt=0; bool bSnapHgtDC=false;
tools::Long nLogicWdt=0; bool bLogicWdtDC=false,bLogicWdtDiff=false;
tools::Long nLogicHgt=0; bool bLogicHgtDC=false,bLogicHgtDiff=false;
Degree100 nRotAngle(0); bool bRotAngleDC=false;
Degree100 nShrAngle(0); bool bShrAngleDC=false;
tools::Rectangle aSnapRect;
tools::Rectangle aLogicRect;
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm) {
const SdrMark* pM=GetSdrMarkByIndex(nm);
const SdrObject* pObj=pM->GetMarkedSdrObj();
if (nm==0) {
nLayerId=pObj->GetLayer();
bMovProtect=pObj->IsMoveProtect();
bSizProtect=pObj->IsResizeProtect();
bPrintable =pObj->IsPrintable();
bVisible = pObj->IsVisible();
tools::Rectangle aSnapRect2(pObj->GetSnapRect());
tools::Rectangle aLogicRect2(pObj->GetLogicRect());
nSnapPosX=aSnapRect2.Left();
nSnapPosY=aSnapRect2.Top();
nSnapWdt=aSnapRect2.GetWidth()-1;
nSnapHgt=aSnapRect2.GetHeight()-1;
nLogicWdt=aLogicRect2.GetWidth()-1;
nLogicHgt=aLogicRect2.GetHeight()-1;
bLogicWdtDiff=nLogicWdt!=nSnapWdt;
bLogicHgtDiff=nLogicHgt!=nSnapHgt;
nRotAngle=pObj->GetRotateAngle();
nShrAngle=pObj->GetShearAngle();
} else {
if (!bLayerDC && nLayerId !=pObj->GetLayer()) bLayerDC = true;
if (!bMovProtectDC && bMovProtect!=pObj->IsMoveProtect()) bMovProtectDC = true;
if (!bSizProtectDC && bSizProtect!=pObj->IsResizeProtect()) bSizProtectDC = true;
if (!bPrintableDC && bPrintable !=pObj->IsPrintable()) bPrintableDC = true;
if (!bVisibleDC && bVisible !=pObj->IsVisible()) bVisibleDC=true;
if (!bRotAngleDC && nRotAngle !=pObj->GetRotateAngle()) bRotAngleDC=true;
if (!bShrAngleDC && nShrAngle !=pObj->GetShearAngle()) bShrAngleDC=true;
if (!bSnapWdtDC || !bSnapHgtDC || !bSnapPosXDC || !bSnapPosYDC || !bLogicWdtDiff || !bLogicHgtDiff) {
aSnapRect=pObj->GetSnapRect();
if (nSnapPosX!=aSnapRect.Left()) bSnapPosXDC=true;
if (nSnapPosY!=aSnapRect.Top()) bSnapPosYDC=true;
if (nSnapWdt!=aSnapRect.GetWidth()-1) bSnapWdtDC=true;
if (nSnapHgt!=aSnapRect.GetHeight()-1) bSnapHgtDC=true;
}
if (!bLogicWdtDC || !bLogicHgtDC || !bLogicWdtDiff || !bLogicHgtDiff) {
aLogicRect=pObj->GetLogicRect();
if (nLogicWdt!=aLogicRect.GetWidth()-1) bLogicWdtDC=true;
if (nLogicHgt!=aLogicRect.GetHeight()-1) bLogicHgtDC=true;
if (!bLogicWdtDiff && aSnapRect.GetWidth()!=aLogicRect.GetWidth()) bLogicWdtDiff=true;
if (!bLogicHgtDiff && aSnapRect.GetHeight()!=aLogicRect.GetHeight()) bLogicHgtDiff=true;
}
}
}
if (bSnapPosXDC || nAllSnapPosX!=nSnapPosX) rAttr.Put(SdrAllPositionXItem(nAllSnapPosX));
if (bSnapPosYDC || nAllSnapPosY!=nSnapPosY) rAttr.Put(SdrAllPositionYItem(nAllSnapPosY));
if (bSnapWdtDC || nAllSnapWdt !=nSnapWdt ) rAttr.Put(SdrAllSizeWidthItem(nAllSnapWdt));
if (bSnapHgtDC || nAllSnapHgt !=nSnapHgt ) rAttr.Put(SdrAllSizeHeightItem(nAllSnapHgt));
// items for pure transformations
rAttr.Put(SdrMoveXItem());
rAttr.Put(SdrMoveYItem());
rAttr.Put(SdrResizeXOneItem());
rAttr.Put(SdrResizeYOneItem());
rAttr.Put(SdrRotateOneItem());
rAttr.Put(SdrHorzShearOneItem());
rAttr.Put(SdrVertShearOneItem());
if (nMarkCount>1) {
rAttr.Put(SdrResizeXAllItem());
rAttr.Put(SdrResizeYAllItem());
rAttr.Put(SdrRotateAllItem());
rAttr.Put(SdrHorzShearAllItem());
rAttr.Put(SdrVertShearAllItem());
}
if(meDragMode == SdrDragMode::Rotate || meDragMode == SdrDragMode::Mirror)
{
rAttr.Put(SdrTransformRef1XItem(GetRef1().X()));
rAttr.Put(SdrTransformRef1YItem(GetRef1().Y()));
}
if(meDragMode == SdrDragMode::Mirror)
{
rAttr.Put(SdrTransformRef2XItem(GetRef2().X()));
rAttr.Put(SdrTransformRef2YItem(GetRef2().Y()));
}
}
SfxItemSet SdrEditView::GetAttrFromMarked(bool bOnlyHardAttr) const
{
SfxItemSet aSet(mpModel->GetItemPool());
MergeAttrFromMarked(aSet,bOnlyHardAttr);
//the EE_FEATURE items should not be set with SetAttrToMarked (see error message there)
//so we do not set them here
// #i32448#
// Do not disable, but clear the items.
aSet.ClearItem(EE_FEATURE_TAB);
aSet.ClearItem(EE_FEATURE_LINEBR);
aSet.ClearItem(EE_FEATURE_NOTCONV);
aSet.ClearItem(EE_FEATURE_FIELD);
return aSet;
}
void SdrEditView::MergeAttrFromMarked(SfxItemSet& rAttr, bool bOnlyHardAttr) const
{
const size_t nMarkCount(GetMarkedObjectCount());
for(size_t a = 0; a < nMarkCount; ++a)
{
// #80277# merging was done wrong in the prev version
SdrObject *pObj = GetMarkedObjectByIndex(a);
if (!pObj)
{
continue;
}
const SfxItemSet& rSet = pObj->GetMergedItemSet();
SfxWhichIter aIter(rSet);
sal_uInt16 nWhich(aIter.FirstWhich());
while(nWhich)
{
if(!bOnlyHardAttr)
{
if(SfxItemState::DONTCARE == aIter.GetItemState(false))
rAttr.InvalidateItem(nWhich);
else
rAttr.MergeValue(rSet.Get(nWhich), true);
}
else if(SfxItemState::SET == aIter.GetItemState(false))
{
const SfxPoolItem& rItem = rSet.Get(nWhich);
rAttr.MergeValue(rItem, true);
}
if (comphelper::LibreOfficeKit::isActive())
{
OUString sPayload;
switch(nWhich)
{
case XATTR_LINECOLOR:
{
const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINECOLOR);
if (pItem)
{
Color aColor = static_cast<const XLineColorItem*>(pItem)->GetColorValue();
sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
sPayload = ".uno:XLineColor=" + sPayload;
}
break;
}
case XATTR_FILLCOLOR:
{
const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLCOLOR);
if (pItem)
{
Color aColor = static_cast<const XFillColorItem*>(pItem)->GetColorValue();
sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
sPayload = ".uno:FillColor=" + sPayload;
}
break;
}
case XATTR_FILLTRANSPARENCE:
{
const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLTRANSPARENCE);
if (pItem)
{
sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
sPayload = OUString::number(nTransparency);
sPayload = ".uno:FillTransparence=" + sPayload;
}
break;
}
case XATTR_LINETRANSPARENCE:
{
const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINETRANSPARENCE);
if (pItem)
{
sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
sPayload = OUString::number(nTransparency);
sPayload = ".uno:LineTransparence=" + sPayload;
}
break;
}
case XATTR_LINEWIDTH:
{
const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINEWIDTH);
if (pItem)
{
sal_uInt32 nWidth = static_cast<const XLineWidthItem*>(pItem)->GetValue();
sPayload = OUString::number(nWidth);
sPayload = ".uno:LineWidth=" + sPayload;
}
break;
}
case SDRATTR_SHADOWTRANSPARENCE:
{
const SfxPoolItem* pItem = rSet.GetItem(SDRATTR_SHADOWTRANSPARENCE);
if (pItem)
{
sal_uInt16 nWidth = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
sPayload = OUString::number(nWidth);
sPayload = ".uno:FillShadowTransparency=" + sPayload;
}
break;
}
}
if (!sPayload.isEmpty())
GetSfxViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED,
OUStringToOString(sPayload, RTL_TEXTENCODING_ASCII_US).getStr());
}
nWhich = aIter.NextWhich();
}
}
}
std::vector<sal_uInt16> GetAllCharPropIds(const SfxItemSet& rSet)
{
std::vector<sal_uInt16> aCharWhichIds;
{
SfxItemIter aIter(rSet);
for (const SfxPoolItem* pItem = aIter.GetCurItem(); pItem; pItem = aIter.NextItem())
{
if (!IsInvalidItem(pItem))
{
sal_uInt16 nWhich = pItem->Which();
if (nWhich>=EE_CHAR_START && nWhich<=EE_CHAR_END)
aCharWhichIds.push_back( nWhich );
}
}
}
return aCharWhichIds;
}
std::vector<sal_uInt16> GetAllCharPropIds(o3tl::span< const SfxPoolItem* const > aChangedItems)
{
std::vector<sal_uInt16> aCharWhichIds;
for (const SfxPoolItem* pItem : aChangedItems)
{
sal_uInt16 nWhich = pItem->Which();
if (nWhich>=EE_CHAR_START && nWhich<=EE_CHAR_END)
aCharWhichIds.push_back( nWhich );
}
return aCharWhichIds;
}
void SdrEditView::SetAttrToMarked(const SfxItemSet& rAttr, bool bReplaceAll)
{
if (!AreObjectsMarked())
return;
#ifdef DBG_UTIL
{
bool bHasEEFeatureItems=false;
SfxItemIter aIter(rAttr);
for (const SfxPoolItem* pItem = aIter.GetCurItem(); !bHasEEFeatureItems && pItem;
pItem = aIter.NextItem())
{
if (!IsInvalidItem(pItem)) {
sal_uInt16 nW=pItem->Which();
if (nW>=EE_FEATURE_START && nW<=EE_FEATURE_END) bHasEEFeatureItems=true;
}
}
if(bHasEEFeatureItems)
{
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Info, VclButtonsType::Ok,
"SdrEditView::SetAttrToMarked(): Setting EE_FEATURE items at the SdrView does not make sense! It only leads to overhead and unreadable documents."));
xInfoBox->run();
}
}
#endif
// #103836# if the user sets character attributes to the complete shape,
// we want to remove all hard set character attributes with same
// which ids from the text. We do that later but here we remember
// all character attribute which id's that are set.
std::vector<sal_uInt16> aCharWhichIds(GetAllCharPropIds(rAttr));
// To make Undo reconstruct text attributes correctly after Format.Standard
bool bHasEEItems=SearchOutlinerItems(rAttr,bReplaceAll);
// save additional geometry information when paragraph or character attributes
// are changed and the geometrical shape of the text object might be changed
bool bPossibleGeomChange(false);
SfxWhichIter aIter(rAttr);
sal_uInt16 nWhich = aIter.FirstWhich();
while(!bPossibleGeomChange && nWhich)
{
SfxItemState eState = aIter.GetItemState();
if(eState == SfxItemState::SET)
{
if((nWhich >= SDRATTR_TEXT_MINFRAMEHEIGHT && nWhich <= SDRATTR_TEXT_CONTOURFRAME)
|| nWhich == SDRATTR_3DOBJ_PERCENT_DIAGONAL
|| nWhich == SDRATTR_3DOBJ_BACKSCALE
|| nWhich == SDRATTR_3DOBJ_DEPTH
|| nWhich == SDRATTR_3DOBJ_END_ANGLE
|| nWhich == SDRATTR_3DSCENE_DISTANCE)
{
bPossibleGeomChange = true;
}
}
nWhich = aIter.NextWhich();
}
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
BegUndo(ImpGetDescriptionString(STR_EditSetAttributes));
}
const size_t nMarkCount(GetMarkedObjectCount());
std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
// create ItemSet without SfxItemState::DONTCARE. Put()
// uses its second parameter (bInvalidAsDefault) to
// remove all such items to set them to default.
SfxItemSet aAttr(*rAttr.GetPool(), rAttr.GetRanges());
aAttr.Put(rAttr);
// #i38135#
bool bResetAnimationTimer(false);
const bool bLineStartWidthExplicitChange(SfxItemState::SET
== aAttr.GetItemState(XATTR_LINESTARTWIDTH));
const bool bLineEndWidthExplicitChange(SfxItemState::SET
== aAttr.GetItemState(XATTR_LINEENDWIDTH));
// check if LineWidth is part of the change
const bool bAdaptStartEndWidths(!(bLineStartWidthExplicitChange && bLineEndWidthExplicitChange)
&& SfxItemState::SET == aAttr.GetItemState(XATTR_LINEWIDTH));
sal_Int32 nNewLineWidth(0);
if(bAdaptStartEndWidths)
{
nNewLineWidth = aAttr.Get(XATTR_LINEWIDTH).GetValue();
}
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj = pM->GetMarkedSdrObj();
if( bUndo )
{
SdrEdgeObj* pEdgeObj = dynamic_cast< SdrEdgeObj* >( pObj );
if ( pEdgeObj )
bPossibleGeomChange = true;
else
AddUndoActions( CreateConnectorUndo( *pObj ) );
}
// new geometry undo
if(bPossibleGeomChange && bUndo)
{
// save position and size of object, too
AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
}
if( bUndo )
{
// #i8508#
// If this is a text object also rescue the OutlinerParaObject since
// applying attributes to the object may change text layout when
// multiple portions exist with multiple formats. If an OutlinerParaObject
// really exists and needs to be rescued is evaluated in the undo
// implementation itself.
const bool bRescueText = DynCastSdrTextObj(pObj) != nullptr;
// add attribute undo
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj,false,bHasEEItems || bPossibleGeomChange || bRescueText));
}
// set up a scene updater if object is a 3d object
if(DynCastE3dObject(pObj))
{
aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pObj));
}
sal_Int32 nOldLineWidth(0);
if (bAdaptStartEndWidths)
{
nOldLineWidth = pObj->GetMergedItem(XATTR_LINEWIDTH).GetValue();
}
// set attributes at object
pObj->SetMergedItemSetAndBroadcast(aAttr, bReplaceAll);
if(bAdaptStartEndWidths)
{
const SfxItemSet& rSet = pObj->GetMergedItemSet();
if(nOldLineWidth != nNewLineWidth)
{
if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINESTARTWIDTH))
{
const sal_Int32 nValAct(rSet.Get(XATTR_LINESTARTWIDTH).GetValue());
const sal_Int32 nValNewStart(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
pObj->SetMergedItem(XLineStartWidthItem(nValNewStart));
}
if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINEENDWIDTH))
{
const sal_Int32 nValAct(rSet.Get(XATTR_LINEENDWIDTH).GetValue());
const sal_Int32 nValNewEnd(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
pObj->SetMergedItem(XLineEndWidthItem(nValNewEnd));
}
}
}
if(auto pTextObj = DynCastSdrTextObj( pObj))
{
if(!aCharWhichIds.empty())
{
tools::Rectangle aOldBoundRect = pTextObj->GetLastBoundRect();
// #110094#-14 pTextObj->SendRepaintBroadcast(pTextObj->GetBoundRect());
pTextObj->RemoveOutlinerCharacterAttribs( aCharWhichIds );
// object has changed, should be called from
// RemoveOutlinerCharacterAttribs. This will change when the text
// object implementation changes.
pTextObj->SetChanged();
pTextObj->BroadcastObjectChange();
pTextObj->SendUserCall(SdrUserCallType::ChangeAttr, aOldBoundRect);
}
}
// #i38495#
if(!bResetAnimationTimer)
{
if(pObj->GetViewContact().isAnimatedInAnyViewObjectContact())
{
bResetAnimationTimer = true;
}
}
}
// fire scene updaters
while(!aUpdaters.empty())
{
delete aUpdaters.back();
aUpdaters.pop_back();
}
// #i38135#
if(bResetAnimationTimer)
{
SetAnimationTimer(0);
}
// better check before what to do:
// pObj->SetAttr() or SetNotPersistAttr()
// TODO: missing implementation!
SetNotPersistAttrToMarked(rAttr);
if( bUndo )
EndUndo();
}
SfxStyleSheet* SdrEditView::GetStyleSheetFromMarked() const
{
SfxStyleSheet* pRet=nullptr;
bool b1st=true;
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm) {
SdrMark* pM=GetSdrMarkByIndex(nm);
SfxStyleSheet* pSS=pM->GetMarkedSdrObj()->GetStyleSheet();
if (b1st) pRet=pSS;
else if (pRet!=pSS) return nullptr; // different stylesheets
b1st=false;
}
return pRet;
}
void SdrEditView::SetStyleSheetToMarked(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
{
if (!AreObjectsMarked())
return;
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr;
if (pStyleSheet!=nullptr)
aStr = ImpGetDescriptionString(STR_EditSetStylesheet);
else
aStr = ImpGetDescriptionString(STR_EditDelStylesheet);
BegUndo(aStr);
}
const size_t nMarkCount=GetMarkedObjectCount();
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
if( bUndo )
{
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pM->GetMarkedSdrObj()));
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pM->GetMarkedSdrObj(),true,true));
}
pM->GetMarkedSdrObj()->SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
}
if( bUndo )
EndUndo();
}
void SdrEditView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
{
if(GetMarkedObjectCount())
{
rTargetSet.Put(GetAttrFromMarked(bOnlyHardAttr), false);
}
else
{
SdrMarkView::GetAttributes(rTargetSet, bOnlyHardAttr);
}
}
void SdrEditView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
{
if (GetMarkedObjectCount()!=0) {
SetAttrToMarked(rSet,bReplaceAll);
} else {
SdrMarkView::SetAttributes(rSet,bReplaceAll);
}
}
SfxStyleSheet* SdrEditView::GetStyleSheet() const
{
if (GetMarkedObjectCount()!=0) {
return GetStyleSheetFromMarked();
} else {
return SdrMarkView::GetStyleSheet();
}
}
void SdrEditView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
{
if (GetMarkedObjectCount()!=0) {
SetStyleSheetToMarked(pStyleSheet,bDontRemoveHardAttr);
} else {
SdrMarkView::SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
}
}
SfxItemSet SdrEditView::GetGeoAttrFromMarked() const
{
SfxItemSet aRetSet(
mpModel->GetItemPool(),
svl::Items< // SID_ATTR_TRANSFORM_... from s:svxids.hrc
SDRATTR_CORNER_RADIUS, SDRATTR_CORNER_RADIUS,
SID_ATTR_TRANSFORM_POS_X, SID_ATTR_TRANSFORM_ANGLE,
SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_AUTOHEIGHT>);
if (AreObjectsMarked())
{
SfxItemSet aMarkAttr(GetAttrFromMarked(false)); // because of AutoGrowHeight and corner radius
tools::Rectangle aRect(GetMarkedObjRect());
if(GetSdrPageView())
{
GetSdrPageView()->LogicToPagePos(aRect);
}
// position
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_X,aRect.Left()));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_Y,aRect.Top()));
// size
tools::Long nResizeRefX=aRect.Left();
tools::Long nResizeRefY=aRect.Top();
if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for resizing, too
nResizeRefX=maRef1.X();
nResizeRefY=maRef1.Y();
}
aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_WIDTH,aRect.Right()-aRect.Left()));
aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_HEIGHT,aRect.Bottom()-aRect.Top()));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_X,nResizeRefX));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_Y,nResizeRefY));
Point aRotateAxe(maRef1);
if(GetSdrPageView())
{
GetSdrPageView()->LogicToPagePos(aRotateAxe);
}
// rotation
tools::Long nRotateRefX=aRect.Center().X();
tools::Long nRotateRefY=aRect.Center().Y();
if (meDragMode==SdrDragMode::Rotate) {
nRotateRefX=aRotateAxe.X();
nRotateRefY=aRotateAxe.Y();
}
aRetSet.Put(SdrAngleItem(SID_ATTR_TRANSFORM_ANGLE,GetMarkedObjRotate()));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_X,nRotateRefX));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_Y,nRotateRefY));
// shearing
tools::Long nShearRefX=aRect.Left();
tools::Long nShearRefY=aRect.Bottom();
if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for shearing, too
nShearRefX=aRotateAxe.X();
nShearRefY=aRotateAxe.Y();
}
aRetSet.Put(SdrAngleItem(SID_ATTR_TRANSFORM_SHEAR,GetMarkedObjShear()));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X,nShearRefX));
aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y,nShearRefY));
// check every object whether it is protected
const SdrMarkList& rMarkList=GetMarkedObjectList();
const size_t nMarkCount=rMarkList.GetMarkCount();
SdrObject* pObj=rMarkList.GetMark(0)->GetMarkedSdrObj();
bool bPosProt=pObj->IsMoveProtect();
bool bSizProt=pObj->IsResizeProtect();
bool bPosProtDontCare=false;
bool bSizProtDontCare=false;
for (size_t i=1; i<nMarkCount && (!bPosProtDontCare || !bSizProtDontCare); ++i)
{
pObj=rMarkList.GetMark(i)->GetMarkedSdrObj();
if (bPosProt!=pObj->IsMoveProtect()) bPosProtDontCare=true;
if (bSizProt!=pObj->IsResizeProtect()) bSizProtDontCare=true;
}
// InvalidateItem sets item to DONT_CARE
if (bPosProtDontCare) {
aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_POS);
} else {
aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_POS,bPosProt));
}
if (bSizProtDontCare) {
aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_SIZE);
} else {
aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_SIZE,bSizProt));
}
SfxItemState eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWWIDTH);
bool bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue();
if (eState==SfxItemState::DONTCARE) {
aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOWIDTH);
} else if (eState==SfxItemState::SET) {
aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOWIDTH,bAutoGrow));
}
eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWHEIGHT);
bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
if (eState==SfxItemState::DONTCARE) {
aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOHEIGHT);
} else if (eState==SfxItemState::SET) {
aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOHEIGHT,bAutoGrow));
}
eState=aMarkAttr.GetItemState(SDRATTR_CORNER_RADIUS);
tools::Long nRadius=aMarkAttr.Get(SDRATTR_CORNER_RADIUS).GetValue();
if (eState==SfxItemState::DONTCARE) {
aRetSet.InvalidateItem(SDRATTR_CORNER_RADIUS);
} else if (eState==SfxItemState::SET) {
aRetSet.Put(makeSdrEckenradiusItem(nRadius));
}
basegfx::B2DHomMatrix aTransformation;
if(nMarkCount > 1)
{
// multiple objects, range is collected in aRect
aTransformation = basegfx::utils::createScaleTranslateB2DHomMatrix(
aRect.Left(), aRect.Top(),
aRect.getOpenWidth(), aRect.getOpenHeight());
}
else
{
// single object, get homogen transformation
basegfx::B2DPolyPolygon aPolyPolygon;
pObj->TRGetBaseGeometry(aTransformation, aPolyPolygon);
}
if(aTransformation.isIdentity())
{
aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_MATRIX);
}
else
{
css::geometry::AffineMatrix2D aAffineMatrix2D;
Point aPageOffset(0, 0);
if(GetSdrPageView())
{
aPageOffset = GetSdrPageView()->GetPageOrigin();
}
aAffineMatrix2D.m00 = aTransformation.get(0, 0);
aAffineMatrix2D.m01 = aTransformation.get(0, 1);
aAffineMatrix2D.m02 = aTransformation.get(0, 2) - aPageOffset.X();
aAffineMatrix2D.m10 = aTransformation.get(1, 0);
aAffineMatrix2D.m11 = aTransformation.get(1, 1);
aAffineMatrix2D.m12 = aTransformation.get(1, 2) - aPageOffset.Y();
aRetSet.Put(AffineMatrixItem(&aAffineMatrix2D));
}
}
return aRetSet;
}
static Point ImpGetPoint(const tools::Rectangle& rRect, RectPoint eRP)
{
switch(eRP) {
case RectPoint::LT: return rRect.TopLeft();
case RectPoint::MT: return rRect.TopCenter();
case RectPoint::RT: return rRect.TopRight();
case RectPoint::LM: return rRect.LeftCenter();
case RectPoint::MM: return rRect.Center();
case RectPoint::RM: return rRect.RightCenter();
case RectPoint::LB: return rRect.BottomLeft();
case RectPoint::MB: return rRect.BottomCenter();
case RectPoint::RB: return rRect.BottomRight();
}
return Point(); // Should not happen!
}
void SdrEditView::SetGeoAttrToMarked(const SfxItemSet& rAttr, bool addPageMargin)
{
const bool bTiledRendering = comphelper::LibreOfficeKit::isActive();
tools::Rectangle aRect(GetMarkedObjRect());
if(GetSdrPageView())
{
if (addPageMargin)
{
SdrPage * pPage = GetSdrPageView()->GetPage();
Point upperLeft(pPage->GetLeftBorder(), pPage->GetUpperBorder());
aRect.Move(upperLeft.getX(), upperLeft.getY());
}
GetSdrPageView()->LogicToPagePos(aRect);
}
Degree100 nOldRotateAngle=GetMarkedObjRotate();
Degree100 nOldShearAngle=GetMarkedObjShear();
const SdrMarkList& rMarkList=GetMarkedObjectList();
SdrObject* pObj=nullptr;
RectPoint eSizePoint=RectPoint::MM;
tools::Long nPosDX=0;
tools::Long nPosDY=0;
tools::Long nSizX=0;
tools::Long nSizY=0;
Degree100 nRotateAngle(0);
bool bModeIsRotate(meDragMode == SdrDragMode::Rotate);
tools::Long nRotateX(0);
tools::Long nRotateY(0);
tools::Long nOldRotateX(0);
tools::Long nOldRotateY(0);
if(bModeIsRotate)
{
Point aRotateAxe(maRef1);
if(GetSdrPageView())
{
GetSdrPageView()->LogicToPagePos(aRotateAxe);
}
nRotateX = nOldRotateX = aRotateAxe.X();
nRotateY = nOldRotateY = aRotateAxe.Y();
}
Degree100 nShearAngle(0);
tools::Long nShearX=0;
tools::Long nShearY=0;
bool bShearVert=false;
bool bChgPos=false;
bool bChgSiz=false;
bool bChgWdh=false;
bool bChgHgt=false;
bool bRotate=false;
bool bShear =false;
bool bSetAttr=false;
SfxItemSet aSetAttr(mpModel->GetItemPool());
// position
if (const SfxInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_POS_X))
{
nPosDX = pPoolItem->GetValue() - aRect.Left();
bChgPos=true;
}
if (const SfxInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_POS_Y))
{
nPosDY = pPoolItem->GetValue() - aRect.Top();
bChgPos=true;
}
// size
if (const SfxUInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_WIDTH))
{
nSizX = pPoolItem->GetValue();
bChgSiz=true;
bChgWdh=true;
}
if (const SfxUInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_HEIGHT))
{
nSizY = pPoolItem->GetValue();
bChgSiz=true;
bChgHgt=true;
}
if (bChgSiz) {
if (bTiledRendering && SfxItemState::SET != rAttr.GetItemState(SID_ATTR_TRANSFORM_SIZE_POINT))
eSizePoint = RectPoint::LT;
else
eSizePoint = static_cast<RectPoint>(rAttr.Get(SID_ATTR_TRANSFORM_SIZE_POINT).GetValue());
}
// rotation
if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_DELTA_ANGLE))
{
nRotateAngle = pPoolItem->GetValue();
bRotate = (nRotateAngle != 0_deg100);
}
// rotation
if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ANGLE))
{
nRotateAngle = pPoolItem->GetValue() - nOldRotateAngle;
bRotate = (nRotateAngle != 0_deg100);
}
// position rotation point x
if(bRotate || rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ROT_X))
nRotateX = rAttr.Get(SID_ATTR_TRANSFORM_ROT_X).GetValue();
// position rotation point y
if(bRotate || rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ROT_Y))
nRotateY = rAttr.Get(SID_ATTR_TRANSFORM_ROT_Y).GetValue();
// shearing
if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_SHEAR))
{
Degree100 nNewShearAngle=pPoolItem->GetValue();
if (nNewShearAngle>SDRMAXSHEAR) nNewShearAngle=SDRMAXSHEAR;
if (nNewShearAngle<-SDRMAXSHEAR) nNewShearAngle=-SDRMAXSHEAR;
if (nNewShearAngle!=nOldShearAngle) {
bShearVert = rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_VERTICAL).GetValue();
if (bShearVert) {
nShearAngle=nNewShearAngle;
} else {
if (nNewShearAngle!=0_deg100 && nOldShearAngle!=0_deg100) {
// bug fix
double nOld = tan(toRadians(nOldShearAngle));
double nNew = tan(toRadians(nNewShearAngle));
nNew-=nOld;
nNew = basegfx::rad2deg<100>(atan(nNew));
nShearAngle=Degree100(FRound(nNew));
} else {
nShearAngle=nNewShearAngle-nOldShearAngle;
}
}
bShear=nShearAngle!=0_deg100;
if (bShear) {
nShearX=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_X)).GetValue();
nShearY=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_Y)).GetValue();
}
}
}
// AutoGrow
if (const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_AUTOWIDTH))
{
bool bAutoGrow = pPoolItem->GetValue();
aSetAttr.Put(makeSdrTextAutoGrowWidthItem(bAutoGrow));
bSetAttr=true;
}
if (const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_AUTOHEIGHT))
{
bool bAutoGrow = pPoolItem->GetValue();
aSetAttr.Put(makeSdrTextAutoGrowHeightItem(bAutoGrow));
bSetAttr=true;
}
// corner radius
if (m_bEdgeRadiusAllowed)
if (const SdrMetricItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_CORNER_RADIUS))
{
tools::Long nRadius = pPoolItem->GetValue();
aSetAttr.Put(makeSdrEckenradiusItem(nRadius));
bSetAttr=true;
}
ForcePossibilities();
BegUndo(SvxResId(STR_EditTransform),GetDescriptionOfMarkedObjects());
if (bSetAttr) {
SetAttrToMarked(aSetAttr,false);
}
// change size and height
if (bChgSiz && (m_bResizeFreeAllowed || m_bResizePropAllowed)) {
Fraction aWdt(nSizX,aRect.Right()-aRect.Left());
Fraction aHgt(nSizY,aRect.Bottom()-aRect.Top());
Point aRef(ImpGetPoint(aRect,eSizePoint));
if(GetSdrPageView())
{
GetSdrPageView()->PagePosToLogic(aRef);
}
ResizeMultMarkedObj(aRef, aWdt, aHgt, bChgWdh, bChgHgt);
}
// rotate
if (bRotate && (m_bRotateFreeAllowed || m_bRotate90Allowed)) {
Point aRef(nRotateX,nRotateY);
if(GetSdrPageView())
{
GetSdrPageView()->PagePosToLogic(aRef);
}
RotateMarkedObj(aRef,nRotateAngle);
}
// set rotation point position
if(bModeIsRotate && (nRotateX != nOldRotateX || nRotateY != nOldRotateY))
{
Point aNewRef1(nRotateX, nRotateY);
if(GetSdrPageView())
{
GetSdrPageView()->PagePosToLogic(aNewRef1);
}
SetRef1(aNewRef1);
}
// shear
if (bShear && m_bShearAllowed) {
Point aRef(nShearX,nShearY);
if(GetSdrPageView())
{
GetSdrPageView()->PagePosToLogic(aRef);
}
ShearMarkedObj(aRef,nShearAngle,bShearVert);
// #i74358#
// ShearMarkedObj creates a linear combination of the existing transformation and
// the new shear to apply. If the object is already transformed (e.g. rotated) the
// linear combination will not decompose to the same start values again, but to a
// new combination. Thus it makes no sense to check if the wanted shear is reached
// or not. Taking out.
}
// change position
if (bChgPos && m_bMoveAllowed) {
MoveMarkedObj(Size(nPosDX,nPosDY));
}
const size_t nMarkCount=rMarkList.GetMarkCount();
// protect position
if(const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_PROTECT_POS))
{
const bool bProtPos(pPoolItem->GetValue());
bool bChanged(false);
for(size_t i = 0; i < nMarkCount; ++i)
{
pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if(pObj->IsMoveProtect() != bProtPos)
{
bChanged = true;
pObj->SetMoveProtect(bProtPos);
if(bProtPos)
{
pObj->SetResizeProtect(true);
}
}
}
if(bChanged)
{
m_bMoveProtect = bProtPos;
if(bProtPos)
{
m_bResizeProtect = true;
}
// #i77187# there is no simple method to get the toolbars updated
// in the application. The App is listening to selection change and i
// will use it here (even if not true). It's acceptable since changing
// this model data is pretty rare and only possible using the F4 dialog
MarkListHasChanged();
}
}
if(!m_bMoveProtect)
{
// protect size
if(const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_PROTECT_SIZE))
{
const bool bProtSize(pPoolItem->GetValue());
bool bChanged(false);
for(size_t i = 0; i < nMarkCount; ++i)
{
pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if(pObj->IsResizeProtect() != bProtSize)
{
bChanged = true;
pObj->SetResizeProtect(bProtSize);
}
}
if(bChanged)
{
m_bResizeProtect = bProtSize;
// #i77187# see above
MarkListHasChanged();
}
}
}
EndUndo();
}
bool SdrEditView::IsAlignPossible() const
{ // at least two selected objects, at least one of them movable
ForcePossibilities();
const size_t nCount=GetMarkedObjectCount();
if (nCount==0) return false; // nothing selected!
if (nCount==1) return m_bMoveAllowed; // align single object to page
return m_bOneOrMoreMovable; // otherwise: MarkCount>=2
}
void SdrEditView::AlignMarkedObjects(SdrHorAlign eHor, SdrVertAlign eVert)
{
if (eHor==SdrHorAlign::NONE && eVert==SdrVertAlign::NONE)
return;
SortMarkedObjects();
if (!GetMarkedObjectCount())
return;
const bool bUndo = IsUndoEnabled();
if( bUndo )
{
EndTextEditCurrentView();
OUString aStr(GetDescriptionOfMarkedObjects());
if (eHor==SdrHorAlign::NONE)
{
switch (eVert)
{
case SdrVertAlign::Top:
aStr = ImpGetDescriptionString(STR_EditAlignVTop);
break;
case SdrVertAlign::Bottom:
aStr = ImpGetDescriptionString(STR_EditAlignVBottom);
break;
case SdrVertAlign::Center:
aStr = ImpGetDescriptionString(STR_EditAlignVCenter);
break;
default: break;
}
}
else if (eVert==SdrVertAlign::NONE)
{
switch (eHor)
{
case SdrHorAlign::Left:
aStr = ImpGetDescriptionString(STR_EditAlignHLeft);
break;
case SdrHorAlign::Right:
aStr = ImpGetDescriptionString(STR_EditAlignHRight);
break;
case SdrHorAlign::Center:
aStr = ImpGetDescriptionString(STR_EditAlignHCenter);
break;
default: break;
}
}
else if (eHor==SdrHorAlign::Center && eVert==SdrVertAlign::Center)
{
aStr = ImpGetDescriptionString(STR_EditAlignCenter);
}
else
{
aStr = ImpGetDescriptionString(STR_EditAlign);
}
BegUndo(aStr);
}
tools::Rectangle aBound;
const size_t nMarkCount=GetMarkedObjectCount();
bool bHasFixed=false;
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo(aInfo);
if (!aInfo.bMoveAllowed || pObj->IsMoveProtect())
{
tools::Rectangle aObjRect(pObj->GetSnapRect());
aBound.Union(aObjRect);
bHasFixed=true;
}
}
if (!bHasFixed)
{
if (nMarkCount==1)
{ // align single object to page
const SdrObject* pObj=GetMarkedObjectByIndex(0);
const SdrPage* pPage=pObj->getSdrPageFromSdrObject();
const SdrPageGridFrameList* pGFL=pPage->GetGridFrameList(GetSdrPageViewOfMarkedByIndex(0),&(pObj->GetSnapRect()));
const SdrPageGridFrame* pFrame=nullptr;
if (pGFL!=nullptr && pGFL->GetCount()!=0)
{ // Writer
pFrame=&((*pGFL)[0]);
}
if (pFrame!=nullptr)
{ // Writer
aBound=pFrame->GetUserArea();
}
else
{
aBound=tools::Rectangle(pPage->GetLeftBorder(),pPage->GetUpperBorder(),
pPage->GetWidth()-pPage->GetRightBorder(),
pPage->GetHeight()-pPage->GetLowerBorder());
}
}
else
{
aBound=GetMarkedObjRect();
}
}
Point aCenter(aBound.Center());
for (size_t nm=0; nm<nMarkCount; ++nm)
{
SdrMark* pM=GetSdrMarkByIndex(nm);
SdrObject* pObj=pM->GetMarkedSdrObj();
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo(aInfo);
if (aInfo.bMoveAllowed && !pObj->IsMoveProtect())
{
tools::Long nXMov=0;
tools::Long nYMov=0;
tools::Rectangle aObjRect(pObj->GetSnapRect());
switch (eVert)
{
case SdrVertAlign::Top : nYMov=aBound.Top() -aObjRect.Top() ; break;
case SdrVertAlign::Bottom: nYMov=aBound.Bottom()-aObjRect.Bottom() ; break;
case SdrVertAlign::Center: nYMov=aCenter.Y() -aObjRect.Center().Y(); break;
default: break;
}
switch (eHor)
{
case SdrHorAlign::Left : nXMov=aBound.Left() -aObjRect.Left() ; break;
case SdrHorAlign::Right : nXMov=aBound.Right() -aObjRect.Right() ; break;
case SdrHorAlign::Center: nXMov=aCenter.X() -aObjRect.Center().X(); break;
default: break;
}
if (nXMov!=0 || nYMov!=0)
{
// SdrEdgeObj needs an extra SdrUndoGeoObj since the
// connections may need to be saved
if( bUndo )
{
if( dynamic_cast<SdrEdgeObj*>(pObj) )
{
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
}
AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pObj,Size(nXMov,nYMov)));
}
pObj->Move(Size(nXMov,nYMov));
}
}
}
if( bUndo )
EndUndo();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */