office-gobmx/basegfx/source/polygon/b3dpolypolygontools.cxx
Mike Kaganski 20070d12c8 Drop uses of css::uno::Sequence::getConstArray in accessibility .. basegfx
where it was obsoleted by commits 2484de6728
(Remove non-const Sequence::begin()/end() in internal code, 2021-10-15) and
fb3c04bd19 (Drop non-const Sequence::operator[]
in internal code 2021-11-05).

Change-Id: I14e3634d8e8dd294b673dcda4dde13f01c3e5112
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/166813
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
Tested-by: Jenkins
2024-04-29 23:15:24 +02:00

578 lines
22 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <basegfx/polygon/b3dpolypolygontools.hxx>
#include <basegfx/range/b3drange.hxx>
#include <basegfx/polygon/b3dpolypolygon.hxx>
#include <basegfx/polygon/b3dpolygon.hxx>
#include <basegfx/polygon/b3dpolygontools.hxx>
#include <basegfx/matrix/b3dhommatrix.hxx>
#include <basegfx/numeric/ftools.hxx>
#include <com/sun/star/drawing/DoubleSequence.hpp>
#include <com/sun/star/drawing/PolyPolygonShape3D.hpp>
// predefines
#define nMinSegments sal_uInt32(1)
#define nMaxSegments sal_uInt32(512)
namespace basegfx::utils
{
// B3DPolyPolygon tools
B3DRange getRange(const B3DPolyPolygon& rCandidate)
{
B3DRange aRetval;
for(const auto& rPolygon : rCandidate )
{
aRetval.expand(getRange(rPolygon));
}
return aRetval;
}
B3DPolyPolygon const & createUnitCubePolyPolygon()
{
static auto const singleton = [] {
B3DPolyPolygon aRetval;
B3DPolygon aTemp;
aTemp.append(B3DPoint(0.0, 0.0, 1.0));
aTemp.append(B3DPoint(0.0, 1.0, 1.0));
aTemp.append(B3DPoint(1.0, 1.0, 1.0));
aTemp.append(B3DPoint(1.0, 0.0, 1.0));
aTemp.setClosed(true);
aRetval.append(aTemp);
aTemp.clear();
aTemp.append(B3DPoint(0.0, 0.0, 0.0));
aTemp.append(B3DPoint(0.0, 1.0, 0.0));
aTemp.append(B3DPoint(1.0, 1.0, 0.0));
aTemp.append(B3DPoint(1.0, 0.0, 0.0));
aTemp.setClosed(true);
aRetval.append(aTemp);
aTemp.clear();
aTemp.append(B3DPoint(0.0, 0.0, 0.0));
aTemp.append(B3DPoint(0.0, 0.0, 1.0));
aRetval.append(aTemp);
aTemp.clear();
aTemp.append(B3DPoint(0.0, 1.0, 0.0));
aTemp.append(B3DPoint(0.0, 1.0, 1.0));
aRetval.append(aTemp);
aTemp.clear();
aTemp.append(B3DPoint(1.0, 1.0, 0.0));
aTemp.append(B3DPoint(1.0, 1.0, 1.0));
aRetval.append(aTemp);
aTemp.clear();
aTemp.append(B3DPoint(1.0, 0.0, 0.0));
aTemp.append(B3DPoint(1.0, 0.0, 1.0));
aRetval.append(aTemp);
return aRetval;
}();
return singleton;
}
B3DPolyPolygon const & createUnitCubeFillPolyPolygon()
{
static auto const singleton = [] {
B3DPolyPolygon aRetval;
B3DPolygon aTemp;
// all points
const B3DPoint A(0.0, 0.0, 0.0);
const B3DPoint B(0.0, 1.0, 0.0);
const B3DPoint C(1.0, 1.0, 0.0);
const B3DPoint D(1.0, 0.0, 0.0);
const B3DPoint E(0.0, 0.0, 1.0);
const B3DPoint F(0.0, 1.0, 1.0);
const B3DPoint G(1.0, 1.0, 1.0);
const B3DPoint H(1.0, 0.0, 1.0);
// create bottom
aTemp.append(D);
aTemp.append(A);
aTemp.append(E);
aTemp.append(H);
aTemp.setClosed(true);
aRetval.append(aTemp);
// create front
aTemp.clear();
aTemp.append(B);
aTemp.append(A);
aTemp.append(D);
aTemp.append(C);
aTemp.setClosed(true);
aRetval.append(aTemp);
// create left
aTemp.clear();
aTemp.append(E);
aTemp.append(A);
aTemp.append(B);
aTemp.append(F);
aTemp.setClosed(true);
aRetval.append(aTemp);
// create top
aTemp.clear();
aTemp.append(C);
aTemp.append(G);
aTemp.append(F);
aTemp.append(B);
aTemp.setClosed(true);
aRetval.append(aTemp);
// create right
aTemp.clear();
aTemp.append(H);
aTemp.append(G);
aTemp.append(C);
aTemp.append(D);
aTemp.setClosed(true);
aRetval.append(aTemp);
// create back
aTemp.clear();
aTemp.append(F);
aTemp.append(G);
aTemp.append(H);
aTemp.append(E);
aTemp.setClosed(true);
aRetval.append(aTemp);
return aRetval;
}();
return singleton;
}
B3DPolyPolygon createCubePolyPolygonFromB3DRange( const B3DRange& rRange)
{
B3DPolyPolygon aRetval;
if(!rRange.isEmpty())
{
aRetval = createUnitCubePolyPolygon();
B3DHomMatrix aTrans;
aTrans.scale(rRange.getWidth(), rRange.getHeight(), rRange.getDepth());
aTrans.translate(rRange.getMinX(), rRange.getMinY(), rRange.getMinZ());
aRetval.transform(aTrans);
aRetval.removeDoublePoints();
}
return aRetval;
}
B3DPolyPolygon createCubeFillPolyPolygonFromB3DRange( const B3DRange& rRange)
{
B3DPolyPolygon aRetval;
if(!rRange.isEmpty())
{
aRetval = createUnitCubeFillPolyPolygon();
B3DHomMatrix aTrans;
aTrans.scale(rRange.getWidth(), rRange.getHeight(), rRange.getDepth());
aTrans.translate(rRange.getMinX(), rRange.getMinY(), rRange.getMinZ());
aRetval.transform(aTrans);
aRetval.removeDoublePoints();
}
return aRetval;
}
// helper for getting the 3D Point from given cartesian coordinates. fHor is defined from
// [M_PI_2 .. -M_PI_2], fVer from [0.0 .. 2PI]
static B3DPoint getPointFromCartesian(double fHor, double fVer)
{
const double fCosVer(cos(fVer));
return B3DPoint(fCosVer * cos(fHor), sin(fVer), fCosVer * -sin(fHor));
}
B3DPolyPolygon createUnitSpherePolyPolygon(
sal_uInt32 nHorSeg, sal_uInt32 nVerSeg,
double fVerStart, double fVerStop,
double fHorStart, double fHorStop)
{
B3DPolyPolygon aRetval;
sal_uInt32 a, b;
if(!nHorSeg)
{
nHorSeg = fround(fabs(fHorStop - fHorStart) / (M_PI / 12.0));
}
// min/max limitations
nHorSeg = std::clamp(nHorSeg, nMinSegments, nMaxSegments);
if(!nVerSeg)
{
nVerSeg = fround(fabs(fVerStop - fVerStart) / (M_PI / 12.0));
}
// min/max limitations
nVerSeg = std::clamp(nVerSeg, nMinSegments, nMaxSegments);
// create constants
const double fVerDiffPerStep((fVerStop - fVerStart) / static_cast<double>(nVerSeg));
const double fHorDiffPerStep((fHorStop - fHorStart) / static_cast<double>(nHorSeg));
bool bHorClosed(fTools::equal(fHorStop - fHorStart, 2 * M_PI));
bool bVerFromTop(fTools::equal(fVerStart, M_PI_2));
bool bVerToBottom(fTools::equal(fVerStop, -M_PI_2));
// create horizontal rings
const sal_uInt32 nLoopVerInit(bVerFromTop ? 1 : 0);
const sal_uInt32 nLoopVerLimit(bVerToBottom ? nVerSeg : nVerSeg + 1);
const sal_uInt32 nLoopHorLimit(bHorClosed ? nHorSeg : nHorSeg + 1);
for(a = nLoopVerInit; a < nLoopVerLimit; a++)
{
const double fVer(fVerStart + (static_cast<double>(a) * fVerDiffPerStep));
B3DPolygon aNew;
for(b = 0; b < nLoopHorLimit; b++)
{
const double fHor(fHorStart + (static_cast<double>(b) * fHorDiffPerStep));
aNew.append(getPointFromCartesian(fHor, fVer));
}
aNew.setClosed(bHorClosed);
aRetval.append(aNew);
}
// create vertical half-rings
for(a = 0; a < nLoopHorLimit; a++)
{
const double fHor(fHorStart + (static_cast<double>(a) * fHorDiffPerStep));
B3DPolygon aNew;
if(bVerFromTop)
{
aNew.append(B3DPoint(0.0, 1.0, 0.0));
}
for(b = nLoopVerInit; b < nLoopVerLimit; b++)
{
const double fVer(fVerStart + (static_cast<double>(b) * fVerDiffPerStep));
aNew.append(getPointFromCartesian(fHor, fVer));
}
if(bVerToBottom)
{
aNew.append(B3DPoint(0.0, -1.0, 0.0));
}
aRetval.append(aNew);
}
return aRetval;
}
B3DPolyPolygon createSpherePolyPolygonFromB3DRange( const B3DRange& rRange,
sal_uInt32 nHorSeg, sal_uInt32 nVerSeg,
double fVerStart, double fVerStop,
double fHorStart, double fHorStop)
{
B3DPolyPolygon aRetval(createUnitSpherePolyPolygon(nHorSeg, nVerSeg, fVerStart, fVerStop, fHorStart, fHorStop));
if(aRetval.count())
{
// move and scale whole construct which is now in [-1.0 .. 1.0] in all directions
B3DHomMatrix aTrans;
aTrans.translate(1.0, 1.0, 1.0);
aTrans.scale(rRange.getWidth() / 2.0, rRange.getHeight() / 2.0, rRange.getDepth() / 2.0);
aTrans.translate(rRange.getMinX(), rRange.getMinY(), rRange.getMinZ());
aRetval.transform(aTrans);
}
return aRetval;
}
B3DPolyPolygon createUnitSphereFillPolyPolygon(
sal_uInt32 nHorSeg, sal_uInt32 nVerSeg,
bool bNormals,
double fVerStart, double fVerStop,
double fHorStart, double fHorStop)
{
B3DPolyPolygon aRetval;
if(!nHorSeg)
{
nHorSeg = fround(fabs(fHorStop - fHorStart) / (M_PI / 12.0));
}
// min/max limitations
nHorSeg = std::clamp(nHorSeg, nMinSegments, nMaxSegments);
if(!nVerSeg)
{
nVerSeg = fround(fabs(fVerStop - fVerStart) / (M_PI / 12.0));
}
// min/max limitations
nVerSeg = std::clamp(nVerSeg, nMinSegments, nMaxSegments);
// vertical loop
for(sal_uInt32 a(0); a < nVerSeg; a++)
{
const double fVer1(fVerStart + (((fVerStop - fVerStart) * a) / nVerSeg));
const double fVer2(fVerStart + (((fVerStop - fVerStart) * (a + 1)) / nVerSeg));
// horizontal loop
for(sal_uInt32 b(0); b < nHorSeg; b++)
{
const double fHor1(fHorStart + (((fHorStop - fHorStart) * b) / nHorSeg));
const double fHor2(fHorStart + (((fHorStop - fHorStart) * (b + 1)) / nHorSeg));
B3DPolygon aNew;
aNew.append(getPointFromCartesian(fHor1, fVer1));
aNew.append(getPointFromCartesian(fHor2, fVer1));
aNew.append(getPointFromCartesian(fHor2, fVer2));
aNew.append(getPointFromCartesian(fHor1, fVer2));
if(bNormals)
{
for(sal_uInt32 c(0); c < aNew.count(); c++)
{
aNew.setNormal(c, ::basegfx::B3DVector(aNew.getB3DPoint(c)));
}
}
aNew.setClosed(true);
aRetval.append(aNew);
}
}
return aRetval;
}
B3DPolyPolygon createSphereFillPolyPolygonFromB3DRange( const B3DRange& rRange,
sal_uInt32 nHorSeg, sal_uInt32 nVerSeg,
bool bNormals,
double fVerStart, double fVerStop,
double fHorStart, double fHorStop)
{
B3DPolyPolygon aRetval(createUnitSphereFillPolyPolygon(nHorSeg, nVerSeg, bNormals, fVerStart, fVerStop, fHorStart, fHorStop));
if(aRetval.count())
{
// move and scale whole construct which is now in [-1.0 .. 1.0] in all directions
B3DHomMatrix aTrans;
aTrans.translate(1.0, 1.0, 1.0);
aTrans.scale(rRange.getWidth() / 2.0, rRange.getHeight() / 2.0, rRange.getDepth() / 2.0);
aTrans.translate(rRange.getMinX(), rRange.getMinY(), rRange.getMinZ());
aRetval.transform(aTrans);
}
return aRetval;
}
B3DPolyPolygon applyDefaultNormalsSphere( const B3DPolyPolygon& rCandidate, const B3DPoint& rCenter)
{
B3DPolyPolygon aRetval;
for( const auto& rB3DPolygon : rCandidate)
{
aRetval.append(applyDefaultNormalsSphere(rB3DPolygon, rCenter));
}
return aRetval;
}
B3DPolyPolygon invertNormals( const B3DPolyPolygon& rCandidate)
{
B3DPolyPolygon aRetval;
for( const auto& rB3DPolygon : rCandidate )
{
aRetval.append(invertNormals(rB3DPolygon));
}
return aRetval;
}
B3DPolyPolygon applyDefaultTextureCoordinatesParallel( const B3DPolyPolygon& rCandidate, const B3DRange& rRange, bool bChangeX, bool bChangeY)
{
B3DPolyPolygon aRetval;
for( const auto& rB3DPolygon : rCandidate)
{
aRetval.append(applyDefaultTextureCoordinatesParallel(rB3DPolygon, rRange, bChangeX, bChangeY));
}
return aRetval;
}
B3DPolyPolygon applyDefaultTextureCoordinatesSphere( const B3DPolyPolygon& rCandidate, const B3DPoint& rCenter, bool bChangeX, bool bChangeY)
{
B3DPolyPolygon aRetval;
for( const auto& rB3DPolygon : rCandidate )
{
aRetval.append(applyDefaultTextureCoordinatesSphere(rB3DPolygon, rCenter, bChangeX, bChangeY));
}
return aRetval;
}
bool isInside(const B3DPolyPolygon& rCandidate, const B3DPoint& rPoint)
{
const sal_uInt32 nPolygonCount(rCandidate.count());
if(nPolygonCount == 1)
{
return isInside(rCandidate.getB3DPolygon(0), rPoint, false/*bWithBorder*/);
}
else
{
sal_Int32 nInsideCount(0);
for(const auto& rPolygon : rCandidate )
{
const bool bInside(isInside(rPolygon, rPoint, false/*bWithBorder*/));
if(bInside)
{
nInsideCount++;
}
}
return (nInsideCount % 2);
}
}
/// converters for css::drawing::PolyPolygonShape3D
B3DPolyPolygon UnoPolyPolygonShape3DToB3DPolyPolygon(
const css::drawing::PolyPolygonShape3D& rPolyPolygonShape3DSource)
{
B3DPolyPolygon aRetval;
const sal_Int32 nOuterSequenceCount(rPolyPolygonShape3DSource.SequenceX.getLength());
if(nOuterSequenceCount)
{
assert(nOuterSequenceCount == rPolyPolygonShape3DSource.SequenceY.getLength()
&& nOuterSequenceCount
== rPolyPolygonShape3DSource.SequenceZ.getLength()&&
"UnoPolyPolygonShape3DToB3DPolygon: Not all double sequences have the same "
"length (!)" );
for(sal_Int32 a(0); a < nOuterSequenceCount; a++)
{
basegfx::B3DPolygon aNewPolygon;
auto& rInnerSequenceX = rPolyPolygonShape3DSource.SequenceX[a];
auto& rInnerSequenceY = rPolyPolygonShape3DSource.SequenceY[a];
auto& rInnerSequenceZ = rPolyPolygonShape3DSource.SequenceZ[a];
const sal_Int32 nInnerSequenceCount(rInnerSequenceX.getLength());
assert(nInnerSequenceCount == rInnerSequenceY.getLength()
&& nInnerSequenceCount == rInnerSequenceZ.getLength()
&& "UnoPolyPolygonShape3DToB3DPolygon: Not all double sequences have "
"the same length (!)");
for(sal_Int32 b(0); b < nInnerSequenceCount; b++)
{
aNewPolygon.append(basegfx::B3DPoint(rInnerSequenceX[b], rInnerSequenceY[b], rInnerSequenceZ[b]));
}
// #i101520# correction is needed for imported polygons of old format,
// see callers
basegfx::utils::checkClosed(aNewPolygon);
aRetval.append(aNewPolygon);
}
}
return aRetval;
}
void B3DPolyPolygonToUnoPolyPolygonShape3D(
const B3DPolyPolygon& rPolyPolygonSource,
css::drawing::PolyPolygonShape3D& rPolyPolygonShape3DRetval)
{
const sal_uInt32 nPolygonCount(rPolyPolygonSource.count());
if(nPolygonCount)
{
rPolyPolygonShape3DRetval.SequenceX.realloc(nPolygonCount);
rPolyPolygonShape3DRetval.SequenceY.realloc(nPolygonCount);
rPolyPolygonShape3DRetval.SequenceZ.realloc(nPolygonCount);
css::drawing::DoubleSequence* pOuterSequenceX = rPolyPolygonShape3DRetval.SequenceX.getArray();
css::drawing::DoubleSequence* pOuterSequenceY = rPolyPolygonShape3DRetval.SequenceY.getArray();
css::drawing::DoubleSequence* pOuterSequenceZ = rPolyPolygonShape3DRetval.SequenceZ.getArray();
for(sal_uInt32 a(0); a < nPolygonCount; a++)
{
const basegfx::B3DPolygon& aPoly(rPolyPolygonSource.getB3DPolygon(a));
const sal_uInt32 nPointCount(aPoly.count());
if(nPointCount)
{
const bool bIsClosed(aPoly.isClosed());
const sal_uInt32 nTargetCount(bIsClosed ? nPointCount + 1 : nPointCount);
pOuterSequenceX->realloc(nTargetCount);
pOuterSequenceY->realloc(nTargetCount);
pOuterSequenceZ->realloc(nTargetCount);
double* pInnerSequenceX = pOuterSequenceX->getArray();
double* pInnerSequenceY = pOuterSequenceY->getArray();
double* pInnerSequenceZ = pOuterSequenceZ->getArray();
for(sal_uInt32 b(0); b < nPointCount; b++)
{
const basegfx::B3DPoint aPoint(aPoly.getB3DPoint(b));
*pInnerSequenceX++ = aPoint.getX();
*pInnerSequenceY++ = aPoint.getY();
*pInnerSequenceZ++ = aPoint.getZ();
}
if(bIsClosed)
{
const basegfx::B3DPoint aPoint(aPoly.getB3DPoint(0));
*pInnerSequenceX++ = aPoint.getX();
*pInnerSequenceY++ = aPoint.getY();
*pInnerSequenceZ++ = aPoint.getZ();
}
}
else
{
pOuterSequenceX->realloc(0);
pOuterSequenceY->realloc(0);
pOuterSequenceZ->realloc(0);
}
pOuterSequenceX++;
pOuterSequenceY++;
pOuterSequenceZ++;
}
}
else
{
rPolyPolygonShape3DRetval.SequenceX.realloc(0);
rPolyPolygonShape3DRetval.SequenceY.realloc(0);
rPolyPolygonShape3DRetval.SequenceZ.realloc(0);
}
}
} // end of namespace
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */