office-gobmx/registry/workben/regspeed.cxx
Noel Grandin e52779d2f8 remove unnecessary use of OUString constructor
Change-Id: Ifb220af71857ddacd64e8204fb6d3e4aad8eef71
2013-11-11 11:21:26 +02:00

257 lines
8.8 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <iostream>
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
#include <sys/timeb.h>
#include <sys/types.h>
#include "registry/registry.h"
#include <rtl/ustring.hxx>
#include <rtl/alloc.h>
using namespace std;
/*****************************************************************
MyTimer
*****************************************************************/
#ifndef UNX
class MyTimer
{
public:
void start() { _ftime( &m_start ); };
void stop()
{
_ftime( &m_stop );
m_diff = difftime(m_stop.time, m_start.time);
if (m_stop.millitm > m_start.millitm)
{
m_diff += ((double)(m_stop.millitm - m_start.millitm)) / 1000;
}
else
{
m_diff -= 1;
m_diff += ((double)(1000 - (m_start.millitm - m_stop.millitm))) / 1000;
}
printf(" %.4f Sekunden\n", m_diff);
};
protected:
struct _timeb m_start, m_stop;
double m_diff;
};
#else
extern "C" int ftime(struct timeb *pt);
class MyTimer
{
public:
void start() { ftime( &m_start ); };
void stop()
{
ftime( &m_stop );
m_diff = difftime(m_stop.time, m_start.time);
if (m_stop.millitm > m_start.millitm)
{
m_diff += ((double)(m_stop.millitm - m_start.millitm)) / 1000;
}
else
{
m_diff -= 1;
m_diff += ((double)(1000 - (m_start.millitm - m_stop.millitm))) / 1000;
}
printf(" %.4f Sekunden\n", m_diff);
};
protected:
struct timeb m_start, m_stop;
double m_diff;
};
#endif
#if (defined UNX)
int main( int argc, char * argv[] )
#else
int _cdecl main( int argc, char * argv[] )
#endif
{
RegHandle hReg;
RegKeyHandle hRootKey, hKey, hSubKey, hSubSubKey;
OUString sName1("regkey");
OUString sName2("regSubkey");
OUString sName3("regSubSubkey");
OUString keyName1;
OUString keyName2;
OUString keyName3;
int S1 = 10;
int S2 = 10;
int S3 = 10;
MyTimer aTimer;
if (argc < 4)
{
cerr << "using regspeed count1 count2 count3\n";
exit(1);
}
S1 = atoi(argv[1]);
S2 = atoi(argv[2]);
S3 = atoi(argv[3]);
OUString speedReg( "speed.reg");
if (reg_createRegistry(speedReg.pData, &hReg))
{
cout << "creating registry \"test.reg\" failed\n";
} else
{
if (reg_openRootKey(hReg, &hRootKey))
{
cout << "open root key \"test.reg\" failed\n";
} else
{
printf("\n %d keys anlegen, oeffnen und schliessen dauert ... ", (S1 * S2 * S3));
aTimer.start();
for (sal_Int32 i=0; i < S1; i++)
{
keyName1 = sName1;
keyName1 += OUString().valueOf(i);
if (reg_createKey(hRootKey, keyName1.pData, &hKey))
cout << "creating key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
for (sal_Int32 j=0; j < S2; j++)
{
keyName2 = sName2;
keyName2 += OUString().valueOf(j);
if (reg_createKey(hKey, keyName2.pData, &hSubKey))
cout << "creating key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
for (sal_Int32 n=0; n < S3; n++)
{
keyName3 = sName3;
keyName3 += OUString().valueOf(n);
if (reg_createKey(hSubKey, keyName3.pData, &hSubSubKey))
cout << "creating key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
if (reg_closeKey(hSubSubKey))
cout << "closing key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
if (reg_closeKey(hSubKey))
cout << "closing key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
if (reg_closeKey(hKey))
cout << "closing key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
aTimer.stop();
printf("\n %d keys oeffnen und schliessen dauert ... ", (S1 * S2 * S3));
aTimer.start();
for (sal_Int32 i=0; i < S1; i++)
{
keyName1 = "/";
keyName1 += sName1;
keyName1 += OUString().valueOf(i);
if (reg_openKey(hRootKey, keyName1.pData, &hKey))
cout << "open key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
for (sal_Int32 j=0; j < S2; j++)
{
keyName2 = "/";
keyName2 += sName1;
keyName2 += OUString().valueOf(i);
keyName2 += "/";
keyName2 += sName2;
keyName2 += OUString().valueOf(j);
if (reg_openKey(hRootKey, keyName2.pData, &hSubKey))
cout << "open key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
for (sal_Int32 n=0; n < S3; n++)
{
keyName3 = "/";
keyName3 += sName1;
keyName3 += OUString().valueOf(i);
keyName3 += "/";
keyName3 += sName2;
keyName3 += OUString().valueOf(j);
keyName3 += "/";
keyName3 += sName3;
keyName3 += OUString().valueOf(n);
if (reg_openKey(hRootKey, keyName3.pData, &hSubSubKey))
cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
if (reg_closeKey(hSubSubKey))
cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
if (reg_closeKey(hSubKey))
cout << "closing key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
if (reg_closeKey(hKey))
cout << "closing key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
}
aTimer.stop();
printf("\n 1 key oeffnen und schliessen dauert ... ");
aTimer.start();
if (reg_openKey(hRootKey, keyName3.pData, &hSubSubKey))
cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
if (reg_closeKey(hSubSubKey))
cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
<< "\" failed\n";
aTimer.stop();
}
if (reg_closeKey(hRootKey))
cout << "closing root key failed\n";
if (reg_closeRegistry(hReg))
cout << "\t41. closing registry \"test.reg\" failed\n";
}
return(0);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */