office-gobmx/cui/source/tabpages/transfrm.cxx
Noel Grandin ecf6f6f256 loplugin:ostr in cui
Change-Id: I593eb3c02768423fc8cea8d93c112655860228d9
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/167258
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2024-05-07 12:20:06 +02:00

1580 lines
55 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <sal/config.h>
#include <algorithm>
#include <svx/EnhancedCustomShape2d.hxx>
#include <svx/sdangitm.hxx>
#include <svx/svdundo.hxx>
#include <svx/svdview.hxx>
#include <svx/svdobj.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svdoashp.hxx>
#include <svx/sderitm.hxx>
#include <svx/svxids.hrc>
#include <svx/transfrmhelper.hxx>
#include <svtools/unitconv.hxx>
#include <transfrm.hxx>
#include <svx/anchorid.hxx>
#include <svl/rectitem.hxx>
#include <swpossizetabpage.hxx>
#include <vcl/canvastools.hxx>
#include <vcl/fieldvalues.hxx>
#include <bitmaps.hlst>
// static ----------------------------------------------------------------
const WhichRangesContainer SvxPositionSizeTabPage::pPosSizeRanges(svl::Items<
SID_ATTR_TRANSFORM_POS_X, SID_ATTR_TRANSFORM_POS_Y,
SID_ATTR_TRANSFORM_WIDTH, SID_ATTR_TRANSFORM_SIZE_POINT,
SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_INTERN,
SID_ATTR_TRANSFORM_AUTOWIDTH, SID_ATTR_TRANSFORM_AUTOHEIGHT,
SID_ATTR_TRANSFORM_ANCHOR, SID_ATTR_TRANSFORM_VERT_ORIENT
>);
const WhichRangesContainer SvxAngleTabPage::pAngleRanges(svl::Items<
SID_ATTR_TRANSFORM_ROT_X, SID_ATTR_TRANSFORM_ANGLE,
SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_INTERN
>);
const WhichRangesContainer SvxSlantTabPage::pSlantRanges(svl::Items<
SDRATTR_CORNER_RADIUS, SDRATTR_CORNER_RADIUS,
SID_ATTR_TRANSFORM_INTERN, SID_ATTR_TRANSFORM_INTERN,
SID_ATTR_TRANSFORM_SHEAR, SID_ATTR_TRANSFORM_SHEAR_VERTICAL
>);
/*************************************************************************
|*
|* constructor of the tab dialog: adds the pages to the dialog
|*
\************************************************************************/
SvxTransformTabDialog::SvxTransformTabDialog(weld::Window* pParent, const SfxItemSet* pAttr,
const SdrView* pSdrView, SvxAnchorIds nAnchorTypes)
: SfxTabDialogController(pParent, u"cui/ui/positionsizedialog.ui"_ustr, u"PositionAndSizeDialog"_ustr, pAttr)
, pView(pSdrView)
, nAnchorCtrls(nAnchorTypes)
{
DBG_ASSERT(pView, "no valid view (!)");
//different positioning page in Writer
if(nAnchorCtrls & (SvxAnchorIds::Paragraph | SvxAnchorIds::Character | SvxAnchorIds::Page | SvxAnchorIds::Fly))
{
AddTabPage(u"RID_SVXPAGE_SWPOSSIZE"_ustr, SvxSwPosSizeTabPage::Create, SvxSwPosSizeTabPage::GetRanges);
RemoveTabPage(u"RID_SVXPAGE_POSITION_SIZE"_ustr);
}
else
{
AddTabPage(u"RID_SVXPAGE_POSITION_SIZE"_ustr, SvxPositionSizeTabPage::Create, SvxPositionSizeTabPage::GetRanges);
RemoveTabPage(u"RID_SVXPAGE_SWPOSSIZE"_ustr);
}
AddTabPage(u"RID_SVXPAGE_ANGLE"_ustr, SvxAngleTabPage::Create, SvxAngleTabPage::GetRanges);
AddTabPage(u"RID_SVXPAGE_SLANT"_ustr, SvxSlantTabPage::Create, SvxSlantTabPage::GetRanges);
}
void SvxTransformTabDialog::PageCreated(const OUString& rId, SfxTabPage &rPage)
{
if (rId == "RID_SVXPAGE_POSITION_SIZE")
{
SvxPositionSizeTabPage& rSvxPos = static_cast<SvxPositionSizeTabPage&>(rPage);
rSvxPos.SetView(pView);
rSvxPos.Construct();
if(nAnchorCtrls & SvxAnchorIds::NoResize)
{
rSvxPos.DisableResize();
}
if(nAnchorCtrls & SvxAnchorIds::NoProtect)
{
rSvxPos.DisableProtect();
rSvxPos.UpdateControlStates();
}
}
else if (rId == "RID_SVXPAGE_SWPOSSIZE")
{
SvxSwPosSizeTabPage& rSwPos = static_cast<SvxSwPosSizeTabPage&>(rPage);
rSwPos.EnableAnchorTypes(nAnchorCtrls);
rSwPos.SetValidateFramePosLink(aValidateLink);
rSwPos.SetView(pView);
}
else if (rId == "RID_SVXPAGE_ANGLE")
{
SvxAngleTabPage& rSvxAng = static_cast<SvxAngleTabPage&>(rPage);
rSvxAng.SetView( pView );
rSvxAng.Construct();
}
else if (rId == "RID_SVXPAGE_SLANT")
{
SvxSlantTabPage& rSvxSlnt = static_cast<SvxSlantTabPage&>(rPage);
rSvxSlnt.SetView( pView );
rSvxSlnt.Construct();
}
}
void SvxTransformTabDialog::SetValidateFramePosLink(const Link<SvxSwFrameValidation&,void>& rLink)
{
aValidateLink = rLink;
}
/*************************************************************************
|*
|* dialog for changing the positions of the rotation
|* angle and the rotation angle of the graphic objects
|*
\************************************************************************/
SvxAngleTabPage::SvxAngleTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
: SvxTabPage(pPage, pController, u"cui/ui/rotationtabpage.ui"_ustr, u"Rotation"_ustr, rInAttrs)
, pView(nullptr)
, eDlgUnit(FieldUnit::NONE)
, m_aCtlRect(this)
, m_xFlPosition(m_xBuilder->weld_widget(u"FL_POSITION"_ustr))
, m_xMtrPosX(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_POS_X"_ustr, FieldUnit::CM))
, m_xMtrPosY(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_POS_Y"_ustr, FieldUnit::CM))
, m_xCtlRect(new weld::CustomWeld(*m_xBuilder, u"CTL_RECT"_ustr, m_aCtlRect))
, m_xFlAngle(m_xBuilder->weld_widget(u"FL_ANGLE"_ustr))
, m_xNfAngle(m_xBuilder->weld_metric_spin_button(u"NF_ANGLE"_ustr, FieldUnit::DEGREE))
, m_xCtlAngle(new svx::DialControl)
, m_xCtlAngleWin(new weld::CustomWeld(*m_xBuilder, u"CTL_ANGLE"_ustr, *m_xCtlAngle))
{
// calculate PoolUnit
SfxItemPool* pPool = rInAttrs.GetPool();
assert(pPool && "no pool (!)");
ePoolUnit = pPool->GetMetric(SID_ATTR_TRANSFORM_POS_X);
m_xCtlAngle->SetLinkedField(m_xNfAngle.get(), 2);
}
SvxAngleTabPage::~SvxAngleTabPage()
{
}
void SvxAngleTabPage::Construct()
{
assert(pView && "No valid view (!)");
eDlgUnit = GetModuleFieldUnit(GetItemSet());
SetFieldUnit(*m_xMtrPosX, eDlgUnit, true);
SetFieldUnit(*m_xMtrPosY, eDlgUnit, true);
if (FieldUnit::MILE == eDlgUnit || FieldUnit::KM == eDlgUnit)
{
m_xMtrPosX->set_digits(3);
m_xMtrPosY->set_digits(3);
}
{ // #i75273#
::tools::Rectangle aTempRect(pView->GetAllMarkedRect());
pView->GetSdrPageView()->LogicToPagePos(aTempRect);
maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
}
// Take anchor into account (Writer)
const SdrMarkList& rMarkList = pView->GetMarkedObjectList();
if(rMarkList.GetMarkCount())
{
const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());
if(!maAnchor.equalZero()) // -> Writer
{
maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
}
}
// take scale into account
const Fraction aUIScale(pView->GetModel().GetUIScale());
TransfrmHelper::ScaleRect(maRange, aUIScale);
// take UI units into account
sal_uInt16 nDigits(m_xMtrPosX->get_digits());
TransfrmHelper::ConvertRect(maRange, nDigits, ePoolUnit, eDlgUnit);
if(!pView->IsRotateAllowed())
{
m_xFlPosition->set_sensitive(false);
m_xFlAngle->set_sensitive(false);
}
}
bool SvxAngleTabPage::FillItemSet(SfxItemSet* rSet)
{
bool bModified = false;
if (m_xCtlAngle->IsValueModified() || m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved())
{
const double fUIScale(double(pView->GetModel().GetUIScale()));
const double fTmpX((GetCoreValue(*m_xMtrPosX, ePoolUnit) + maAnchor.getX()) * fUIScale);
const double fTmpY((GetCoreValue(*m_xMtrPosY, ePoolUnit) + maAnchor.getY()) * fUIScale);
rSet->Put(SdrAngleItem(SID_ATTR_TRANSFORM_ANGLE, m_xCtlAngle->GetRotation()));
rSet->Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_X, basegfx::fround(fTmpX)));
rSet->Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_Y, basegfx::fround(fTmpY)));
bModified = true;
}
return bModified;
}
void SvxAngleTabPage::Reset(const SfxItemSet* rAttrs)
{
const double fUIScale(double(pView->GetModel().GetUIScale()));
const SfxPoolItem* pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ROT_X );
if(pItem)
{
const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getX()) / fUIScale);
SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), ePoolUnit);
}
else
{
m_xMtrPosX->set_text(OUString());
}
pItem = GetItem(*rAttrs, SID_ATTR_TRANSFORM_ROT_Y);
if(pItem)
{
const double fTmp((static_cast<double>(static_cast<const SfxInt32Item*>(pItem)->GetValue()) - maAnchor.getY()) / fUIScale);
SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), ePoolUnit);
}
else
{
m_xMtrPosY->set_text(OUString());
}
pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_ANGLE );
if(pItem)
{
m_xCtlAngle->SetRotation(static_cast<const SdrAngleItem*>(pItem)->GetValue());
}
else
{
m_xCtlAngle->SetRotation(0_deg100);
}
m_xCtlAngle->SaveValue();
m_xMtrPosX->save_value();
m_xMtrPosY->save_value();
}
std::unique_ptr<SfxTabPage> SvxAngleTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rSet)
{
return std::make_unique<SvxAngleTabPage>(pPage, pController, *rSet);
}
void SvxAngleTabPage::ActivatePage(const SfxItemSet& rSet)
{
if(SfxBoolItem const * bPosProtect = rSet.GetItemIfSet( SID_ATTR_TRANSFORM_PROTECT_POS, false ))
{
m_xFlPosition->set_sensitive(!bPosProtect->GetValue());
m_xFlAngle->set_sensitive(!bPosProtect->GetValue());
}
}
DeactivateRC SvxAngleTabPage::DeactivatePage( SfxItemSet* _pSet )
{
if(_pSet)
{
FillItemSet(_pSet);
}
return DeactivateRC::LeavePage;
}
void SvxAngleTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP)
{
if (pDrawingArea != m_aCtlRect.GetDrawingArea())
return;
switch(eRP)
{
case RectPoint::LT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::MT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::RT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::LM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::MM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::RM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::LB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::MB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::RB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
}
}
/*************************************************************************
|*
|* dialog for changing slant and corner radius
|*
\************************************************************************/
SvxSlantTabPage::SvxSlantTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
: SfxTabPage(pPage, pController, u"cui/ui/slantcornertabpage.ui"_ustr, u"SlantAndCornerRadius"_ustr, &rInAttrs)
, pView(nullptr)
, eDlgUnit(FieldUnit::NONE)
, m_xFlRadius(m_xBuilder->weld_widget(u"FL_RADIUS"_ustr))
, m_xMtrRadius(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_RADIUS"_ustr, FieldUnit::CM))
, m_xFlAngle(m_xBuilder->weld_widget(u"FL_SLANT"_ustr))
, m_xMtrAngle(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_ANGLE"_ustr, FieldUnit::DEGREE))
{
for (int i = 0; i < 2; ++i)
{
m_aControlGroups[i] = m_xBuilder->weld_widget("controlgroups" + OUString::number(i+1));
m_aControlGroupX[i] = m_xBuilder->weld_widget("controlgroupx" + OUString::number(i+1));
m_aControlX[i] = m_xBuilder->weld_metric_spin_button("controlx" + OUString::number(i+1), FieldUnit::CM);
m_aControlGroupY[i] = m_xBuilder->weld_widget("controlgroupy" + OUString::number(i+1));
m_aControlY[i] = m_xBuilder->weld_metric_spin_button("controly" + OUString::number(i+1), FieldUnit::CM);
}
// this page needs ExchangeSupport
SetExchangeSupport();
// evaluate PoolUnit
SfxItemPool* pPool = rInAttrs.GetPool();
assert(pPool && "no pool (!)");
ePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );
}
SvxSlantTabPage::~SvxSlantTabPage()
{
}
void SvxSlantTabPage::Construct()
{
// get the range
assert(pView && "no valid view (!)");
eDlgUnit = GetModuleFieldUnit(GetItemSet());
SetFieldUnit(*m_xMtrRadius, eDlgUnit, true);
for (int i = 0; i < 2; ++i)
{
SetFieldUnit(*m_aControlX[i], eDlgUnit, true);
SetFieldUnit(*m_aControlY[i], eDlgUnit, true);
}
{ // #i75273#
::tools::Rectangle aTempRect(pView->GetAllMarkedRect());
pView->GetSdrPageView()->LogicToPagePos(aTempRect);
}
}
bool SvxSlantTabPage::FillItemSet(SfxItemSet* rAttrs)
{
bool bModified = false;
if (m_xMtrRadius->get_value_changed_from_saved())
{
Fraction aUIScale = pView->GetModel().GetUIScale();
tools::Long nTmp = tools::Long(GetCoreValue(*m_xMtrRadius, ePoolUnit) * aUIScale);
rAttrs->Put( makeSdrEckenradiusItem( nTmp ) );
bModified = true;
}
if (m_xMtrAngle->get_value_changed_from_saved())
{
sal_Int32 nValue = static_cast<sal_Int32>(m_xMtrAngle->get_value(FieldUnit::NONE));
rAttrs->Put( SdrAngleItem( SID_ATTR_TRANSFORM_SHEAR, Degree100(nValue) ) );
bModified = true;
}
if( bModified )
{
// set reference points
::tools::Rectangle aObjectRect(pView->GetAllMarkedRect());
pView->GetSdrPageView()->LogicToPagePos(aObjectRect);
Point aPt = aObjectRect.Center();
rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X, aPt.X()));
rAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y, aPt.Y()));
rAttrs->Put( SfxBoolItem( SID_ATTR_TRANSFORM_SHEAR_VERTICAL, false ) );
}
bool bControlPointsChanged = false;
for (int i = 0; i < 2; ++i)
{
bControlPointsChanged |= (m_aControlX[i]->get_value_changed_from_saved() ||
m_aControlY[i]->get_value_changed_from_saved());
}
if (!bControlPointsChanged)
return bModified;
bool bSelectionIsSdrObjCustomShape(false);
while(true)
{
if(nullptr == pView)
{
break;
}
if(0 == pView->GetMarkedObjectList().GetMarkCount())
{
break;
}
SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
if(nullptr == pCandidate)
{
break;
}
if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate))
{
break;
}
bSelectionIsSdrObjCustomShape = true;
break;
}
if(bSelectionIsSdrObjCustomShape)
{
SdrObjCustomShape& rSdrObjCustomShape(
static_cast< SdrObjCustomShape& >(
*pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()));
SdrModel& rModel(rSdrObjCustomShape.getSdrModelFromSdrObject());
std::unique_ptr<SdrUndoAction> pUndo;
if (rModel.IsUndoEnabled())
pUndo = rModel.GetSdrUndoFactory().CreateUndoAttrObject(rSdrObjCustomShape);
if(pUndo)
{
rModel.BegUndo(pUndo->GetComment());
}
EnhancedCustomShape2d aShape(rSdrObjCustomShape);
::tools::Rectangle aLogicRect = aShape.GetLogicRect();
for (int i = 0; i < 2; ++i)
{
if (m_aControlX[i]->get_value_changed_from_saved() || m_aControlY[i]->get_value_changed_from_saved())
{
Point aNewPosition(GetCoreValue(*m_aControlX[i], ePoolUnit),
GetCoreValue(*m_aControlY[i], ePoolUnit));
aNewPosition.Move(aLogicRect.Left(), aLogicRect.Top());
css::awt::Point aPosition;
aPosition.X = aNewPosition.X();
aPosition.Y = aNewPosition.Y();
aShape.SetHandleControllerPosition(i, aPosition);
}
}
rSdrObjCustomShape.SetChanged();
rSdrObjCustomShape.BroadcastObjectChange();
bModified = true;
if (pUndo)
{
rModel.AddUndo(std::move(pUndo));
rModel.EndUndo();
}
}
return bModified;
}
void SvxSlantTabPage::Reset(const SfxItemSet* rAttrs)
{
// if the view has selected objects, items with SfxItemState::DEFAULT need to be disabled
const SfxPoolItem* pItem;
// corner radius
if(!pView->IsEdgeRadiusAllowed())
{
m_xMtrRadius->set_text(u""_ustr);
m_xFlRadius->set_sensitive(false);
}
else
{
pItem = GetItem( *rAttrs, SDRATTR_CORNER_RADIUS );
if( pItem )
{
const double fUIScale(double(pView->GetModel().GetUIScale()));
const double fTmp(static_cast<double>(static_cast<const SdrMetricItem*>(pItem)->GetValue()) / fUIScale);
SetMetricValue(*m_xMtrRadius, basegfx::fround(fTmp), ePoolUnit);
}
else
{
m_xMtrRadius->set_text(u""_ustr);
}
}
m_xMtrRadius->save_value();
// slant: angle
if( !pView->IsShearAllowed() )
{
m_xMtrAngle->set_text( u""_ustr );
m_xFlAngle->set_sensitive(false);
}
else
{
pItem = GetItem( *rAttrs, SID_ATTR_TRANSFORM_SHEAR );
if( pItem )
{
m_xMtrAngle->set_value(static_cast<const SdrAngleItem*>(pItem)->GetValue().get(), FieldUnit::NONE);
}
else
{
m_xMtrAngle->set_text(u""_ustr);
}
}
m_xMtrAngle->save_value();
bool bSelectionIsSdrObjCustomShape(false);
while(true)
{
if(1 != pView->GetMarkedObjectList().GetMarkCount())
{
break;
}
SdrObject* pCandidate(pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj());
if(nullptr == pCandidate)
{
break;
}
if(nullptr == dynamic_cast< SdrObjCustomShape* >(pCandidate))
{
break;
}
bSelectionIsSdrObjCustomShape = true;
break;
}
if(bSelectionIsSdrObjCustomShape)
{
SdrObjCustomShape& rSdrObjCustomShape(
static_cast< SdrObjCustomShape& >(
*pView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj()));
//save geometry
const bool bOrigModelChangeState = pView->GetModel().IsChanged();
SdrCustomShapeGeometryItem aInitialGeometry(rSdrObjCustomShape.GetMergedItem(SDRATTR_CUSTOMSHAPE_GEOMETRY));
EnhancedCustomShape2d aShape(rSdrObjCustomShape);
for (int i = 0; i < 2; ++i)
{
Point aInitialPosition;
if (!aShape.GetHandlePosition(i, aInitialPosition))
break;
m_aControlGroups[i]->set_sensitive(true);
css::awt::Point aPosition;
aPosition.X = SAL_MAX_INT32/2;
aPosition.Y = SAL_MAX_INT32/2;
aShape.SetHandleControllerPosition(i, aPosition);
Point aMaxPosition;
aShape.GetHandlePosition(i, aMaxPosition);
aPosition.X = SAL_MIN_INT32/2;
aPosition.Y = SAL_MIN_INT32/2;
aShape.SetHandleControllerPosition(i, aPosition);
Point aMinPosition;
aShape.GetHandlePosition(i, aMinPosition);
::tools::Rectangle aLogicRect = aShape.GetLogicRect();
aInitialPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
aMaxPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
aMinPosition.Move(-aLogicRect.Left(), -aLogicRect.Top());
SetMetricValue(*m_aControlX[i], aInitialPosition.X(), ePoolUnit);
SetMetricValue(*m_aControlY[i], aInitialPosition.Y(), ePoolUnit);
if (aMaxPosition.X() == aMinPosition.X())
m_aControlGroupX[i]->set_sensitive(false);
else
m_aControlX[i]->set_range(aMinPosition.X(), aMaxPosition.X(), FieldUnit::MM);
if (aMaxPosition.Y() == aMinPosition.Y())
m_aControlGroupY[i]->set_sensitive(false);
else
m_aControlY[i]->set_range(aMinPosition.Y(), aMaxPosition.Y(), FieldUnit::MM);
}
//restore geometry
rSdrObjCustomShape.SetMergedItem(aInitialGeometry);
pView->GetModel().SetChanged(bOrigModelChangeState);
}
for (int i = 0; i < 2; ++i)
{
m_aControlX[i]->save_value();
m_aControlY[i]->save_value();
}
}
std::unique_ptr<SfxTabPage> SvxSlantTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs)
{
return std::make_unique<SvxSlantTabPage>(pPage, pController, *rOutAttrs);
}
void SvxSlantTabPage::ActivatePage( const SfxItemSet& rSet )
{
if(SfxBoolItem const * bPosProtect = rSet.GetItemIfSet( SID_ATTR_TRANSFORM_PROTECT_POS, false ))
{
m_xFlAngle->set_sensitive(!bPosProtect->GetValue());
}
if(SfxBoolItem const * bSizeProtect = rSet.GetItemIfSet( SID_ATTR_TRANSFORM_PROTECT_SIZE, false ))
{
m_xFlAngle->set_sensitive(!bSizeProtect->GetValue());
}
}
DeactivateRC SvxSlantTabPage::DeactivatePage( SfxItemSet* _pSet )
{
if(_pSet)
{
FillItemSet(_pSet);
}
return DeactivateRC::LeavePage;
}
/*************************************************************************
|*
|* Dialog for changing position and size of graphic objects
|*
\************************************************************************/
SvxPositionSizeTabPage::SvxPositionSizeTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs)
: SvxTabPage(pPage, pController, u"cui/ui/possizetabpage.ui"_ustr, u"PositionAndSize"_ustr, rInAttrs)
, mrOutAttrs(rInAttrs)
, mpView(nullptr)
, meDlgUnit(FieldUnit::NONE)
, mnProtectSizeState(TRISTATE_FALSE)
, mbPageDisabled(false)
, mbProtectDisabled(false)
, mbSizeDisabled(false)
, mbAdjustDisabled(true)
, mbIgnoreAutoGrowWidth(true)
, mbIgnoreAutoGrowHeight(true)
, mfOldWidth(0.0)
, mfOldHeight(0.0)
, m_aCtlPos(this)
, m_aCtlSize(this)
, m_aRatioTop(ConnectorType::Top)
, m_aRatioBottom(ConnectorType::Bottom)
, m_xFlPosition(m_xBuilder->weld_widget(u"FL_POSITION"_ustr))
, m_xMtrPosX(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_POS_X"_ustr, FieldUnit::CM))
, m_xMtrPosY(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_POS_Y"_ustr, FieldUnit::CM))
, m_xCtlPos(new weld::CustomWeld(*m_xBuilder, u"CTL_POSRECT"_ustr, m_aCtlPos))
, m_xFlSize(m_xBuilder->weld_widget(u"FL_SIZE"_ustr))
, m_xFtWidth(m_xBuilder->weld_label(u"FT_WIDTH"_ustr))
, m_xMtrWidth(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_WIDTH"_ustr, FieldUnit::CM))
, m_xFtHeight(m_xBuilder->weld_label(u"FT_HEIGHT"_ustr))
, m_xMtrHeight(m_xBuilder->weld_metric_spin_button(u"MTR_FLD_HEIGHT"_ustr, FieldUnit::CM))
, m_xCbxScale(m_xBuilder->weld_check_button(u"CBX_SCALE"_ustr))
, m_xCbxScaleImg(m_xBuilder->weld_image(u"imRatio"_ustr))
, m_xImgRatioTop(new weld::CustomWeld(*m_xBuilder, u"daRatioTop"_ustr, m_aRatioTop))
, m_xImgRatioBottom(new weld::CustomWeld(*m_xBuilder, u"daRatioBottom"_ustr, m_aRatioBottom))
, m_xCtlSize(new weld::CustomWeld(*m_xBuilder, u"CTL_SIZERECT"_ustr, m_aCtlSize))
, m_xFlProtect(m_xBuilder->weld_widget(u"FL_PROTECT"_ustr))
, m_xTsbPosProtect(m_xBuilder->weld_check_button(u"TSB_POSPROTECT"_ustr))
, m_xTsbSizeProtect(m_xBuilder->weld_check_button(u"TSB_SIZEPROTECT"_ustr))
, m_xFlAdjust(m_xBuilder->weld_widget(u"FL_ADJUST"_ustr))
, m_xTsbAutoGrowWidth(m_xBuilder->weld_check_button(u"TSB_AUTOGROW_WIDTH"_ustr))
, m_xTsbAutoGrowHeight(m_xBuilder->weld_check_button(u"TSB_AUTOGROW_HEIGHT"_ustr))
{
// this page needs ExchangeSupport
SetExchangeSupport();
// evaluate PoolUnit
SfxItemPool* pPool = mrOutAttrs.GetPool();
assert(pPool && "no pool (!)");
mePoolUnit = pPool->GetMetric( SID_ATTR_TRANSFORM_POS_X );
m_aCtlPos.SetActualRP(RectPoint::LT);
m_aCtlSize.SetActualRP(RectPoint::LT);
meRP = RectPoint::LT; // see above
m_xMtrWidth->connect_value_changed(LINK(this, SvxPositionSizeTabPage, ChangeWidthHdl));
m_xMtrHeight->connect_value_changed(LINK(this, SvxPositionSizeTabPage, ChangeHeightHdl));
m_xCbxScale->connect_toggled(LINK(this, SvxPositionSizeTabPage, ClickAutoHdl));
// vertical alignment = fill makes the drawingarea expand the associated spinedits so we have to size it here
const sal_Int16 aHeight
= static_cast<sal_Int16>(std::max(int(m_xCbxScale->get_preferred_size().getHeight() / 2
- m_xFtWidth->get_preferred_size().getHeight() / 2),
12));
const sal_Int16 aWidth
= static_cast<sal_Int16>(m_xCbxScale->get_preferred_size().getWidth() / 2);
m_xImgRatioTop->set_size_request(aWidth, aHeight);
m_xImgRatioBottom->set_size_request(aWidth, aHeight);
m_xFlAdjust->set_sensitive(false);
// #i2379# disable controls when protected
m_xTsbPosProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangePosProtectHdl ) );
m_xTsbSizeProtect->connect_toggled( LINK( this, SvxPositionSizeTabPage, ChangeSizeProtectHdl ) );
}
SvxPositionSizeTabPage::~SvxPositionSizeTabPage()
{
}
void SvxPositionSizeTabPage::Construct()
{
// get range and work area
assert(mpView && "no valid view (!)");
meDlgUnit = GetModuleFieldUnit( GetItemSet() );
SetFieldUnit( *m_xMtrPosX, meDlgUnit, true );
SetFieldUnit( *m_xMtrPosY, meDlgUnit, true );
SetFieldUnit( *m_xMtrWidth, meDlgUnit, true );
SetFieldUnit( *m_xMtrHeight, meDlgUnit, true );
if(FieldUnit::MILE == meDlgUnit || FieldUnit::KM == meDlgUnit)
{
m_xMtrPosX->set_digits( 3 );
m_xMtrPosY->set_digits( 3 );
m_xMtrWidth->set_digits( 3 );
m_xMtrHeight->set_digits( 3 );
}
{ // #i75273#
::tools::Rectangle aTempRect(mpView->GetAllMarkedRect());
mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
}
{ // #i75273#
::tools::Rectangle aTempRect(mpView->GetWorkArea());
mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
maWorkRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
}
// take anchor into account (Writer)
const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
if(rMarkList.GetMarkCount())
{
const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
maAnchor = basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y());
if(!maAnchor.equalZero()) // -> Writer
{
for(size_t i = 1; i < rMarkList.GetMarkCount(); ++i)
{
pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
if(maAnchor != basegfx::B2DPoint(pObj->GetAnchorPos().X(), pObj->GetAnchorPos().Y()))
{
// different anchor positions
m_xMtrPosX->set_text(u""_ustr);
m_xMtrPosY->set_text(u""_ustr);
mbPageDisabled = true;
return;
}
}
// translate ranges about anchor
maRange = basegfx::B2DRange(maRange.getMinimum() - maAnchor, maRange.getMaximum() - maAnchor);
maWorkRange = basegfx::B2DRange(maWorkRange.getMinimum() - maAnchor, maWorkRange.getMaximum() - maAnchor);
}
}
// this should happen via SID_ATTR_TRANSFORM_AUTOSIZE
if(1 == rMarkList.GetMarkCount())
{
const SdrObject* pObj = rMarkList.GetMark(0)->GetMarkedSdrObj();
const SdrObjKind eKind(pObj->GetObjIdentifier());
if((pObj->GetObjInventor() == SdrInventor::Default) &&
(SdrObjKind::Text == eKind || SdrObjKind::TitleText == eKind || SdrObjKind::OutlineText == eKind) &&
pObj->HasText())
{
mbAdjustDisabled = false;
m_xFlAdjust->set_sensitive(true);
m_xTsbAutoGrowWidth->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );
m_xTsbAutoGrowHeight->connect_toggled( LINK( this, SvxPositionSizeTabPage, ClickSizeProtectHdl ) );
// is used as flag to evaluate if it's selectable
mbIgnoreAutoGrowWidth = false;
mbIgnoreAutoGrowHeight = false;
}
}
// take scale into account
const Fraction aUIScale(mpView->GetModel().GetUIScale());
TransfrmHelper::ScaleRect( maWorkRange, aUIScale );
TransfrmHelper::ScaleRect( maRange, aUIScale );
// take UI units into account
const sal_uInt16 nDigits(m_xMtrPosX->get_digits());
TransfrmHelper::ConvertRect( maWorkRange, nDigits, mePoolUnit, meDlgUnit );
TransfrmHelper::ConvertRect( maRange, nDigits, mePoolUnit, meDlgUnit );
SetMinMaxPosition();
}
bool SvxPositionSizeTabPage::FillItemSet( SfxItemSet* rOutAttrs )
{
bool bModified(false);
if ( m_xMtrWidth->has_focus() )
{
ChangeWidthHdl( *m_xMtrWidth );
}
if ( m_xMtrHeight->has_focus() )
{
ChangeHeightHdl( *m_xMtrHeight );
}
if( !mbPageDisabled )
{
if (m_xMtrPosX->get_value_changed_from_saved() || m_xMtrPosY->get_value_changed_from_saved())
{
const double fUIScale(double(mpView->GetModel().GetUIScale()));
double fX((GetCoreValue( *m_xMtrPosX, mePoolUnit ) + maAnchor.getX()) * fUIScale);
double fY((GetCoreValue( *m_xMtrPosY, mePoolUnit ) + maAnchor.getY()) * fUIScale);
{ // #i75273#
::tools::Rectangle aTempRect(mpView->GetAllMarkedRect());
mpView->GetSdrPageView()->LogicToPagePos(aTempRect);
maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
}
// #101581# GetTopLeftPosition(...) needs coordinates after UI scaling, in real PagePositions
GetTopLeftPosition(fX, fY, maRange);
rOutAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_X, basegfx::fround(fX)));
rOutAttrs->Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_Y, basegfx::fround(fY)));
bModified = true;
}
if (m_xTsbPosProtect->get_state_changed_from_saved())
{
if( m_xTsbPosProtect->get_inconsistent() )
{
rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_POS );
}
else
{
rOutAttrs->Put(
SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_POS,
m_xTsbPosProtect->get_active() ) );
}
bModified = true;
}
}
if (m_xMtrWidth->get_value_changed_from_saved() || m_xMtrHeight->get_value_changed_from_saved())
{
Fraction aUIScale = mpView->GetModel().GetUIScale();
// get Width
double nWidth = static_cast<double>(m_xMtrWidth->get_value(FieldUnit::MM_100TH));
tools::Long lWidth = tools::Long(nWidth * static_cast<double>(aUIScale));
lWidth = OutputDevice::LogicToLogic( lWidth, MapUnit::Map100thMM, mePoolUnit );
lWidth = static_cast<tools::Long>(m_xMtrWidth->denormalize( lWidth ));
// get Height
double nHeight = static_cast<double>(m_xMtrHeight->get_value(FieldUnit::MM_100TH));
tools::Long lHeight = tools::Long(nHeight * static_cast<double>(aUIScale));
lHeight = OutputDevice::LogicToLogic( lHeight, MapUnit::Map100thMM, mePoolUnit );
lHeight = static_cast<tools::Long>(m_xMtrHeight->denormalize( lHeight ));
// put Width & Height to itemset
rOutAttrs->Put( SfxUInt32Item( SID_ATTR_TRANSFORM_WIDTH, static_cast<sal_uInt32>(lWidth) ) );
rOutAttrs->Put( SfxUInt32Item( SID_ATTR_TRANSFORM_HEIGHT, static_cast<sal_uInt32>(lHeight) ) );
rOutAttrs->Put( SfxUInt16Item( SID_ATTR_TRANSFORM_SIZE_POINT, sal::static_int_cast< sal_uInt16 >( meRP ) ) );
bModified = true;
}
if (m_xTsbSizeProtect->get_state_changed_from_saved())
{
if ( m_xTsbSizeProtect->get_inconsistent() )
rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_PROTECT_SIZE );
else
rOutAttrs->Put(
SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_SIZE,
m_xTsbSizeProtect->get_active() ) );
bModified = true;
}
if (m_xTsbAutoGrowWidth->get_state_changed_from_saved())
{
if (!mbIgnoreAutoGrowWidth)
{
if( m_xTsbAutoGrowWidth->get_inconsistent() )
rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOWIDTH );
else
rOutAttrs->Put(
SfxBoolItem( SID_ATTR_TRANSFORM_AUTOWIDTH,
m_xTsbAutoGrowWidth->get_active() ) );
}
bModified = true;
}
if (m_xTsbAutoGrowHeight->get_state_changed_from_saved())
{
if (!mbIgnoreAutoGrowHeight)
{
if (m_xTsbAutoGrowHeight->get_inconsistent())
{
rOutAttrs->InvalidateItem( SID_ATTR_TRANSFORM_AUTOHEIGHT );
}
else
{
rOutAttrs->Put(
SfxBoolItem( SID_ATTR_TRANSFORM_AUTOHEIGHT,
m_xTsbAutoGrowHeight->get_active() ) );
}
}
bModified = true;
}
return bModified;
}
void SvxPositionSizeTabPage::Reset( const SfxItemSet* )
{
const SfxPoolItem* pItem;
const double fUIScale(double(mpView->GetModel().GetUIScale()));
if ( !mbPageDisabled )
{
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_X );
if ( pItem )
{
const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getX()) / fUIScale);
SetMetricValue(*m_xMtrPosX, basegfx::fround(fTmp), mePoolUnit);
}
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_POS_Y );
if ( pItem )
{
const double fTmp((static_cast<const SfxInt32Item*>(pItem)->GetValue() - maAnchor.getY()) / fUIScale);
SetMetricValue(*m_xMtrPosY, basegfx::fround(fTmp), mePoolUnit);
}
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_POS );
if ( pItem )
{
bool bProtected = static_cast<const SfxBoolItem*>( pItem )->GetValue();
m_xTsbPosProtect->set_active(bProtected);
}
else
{
m_xTsbPosProtect->set_inconsistent(true);
}
m_xTsbPosProtect->save_state();
m_aCtlPos.Reset();
// #i2379# Disable controls for protected objects
ChangePosProtectHdl(*m_xTsbPosProtect);
}
{ // #i75273# set width
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_WIDTH );
mfOldWidth = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 );
double fTmpWidth((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldWidth), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
if (m_xMtrWidth->get_digits())
fTmpWidth *= pow(10.0, m_xMtrWidth->get_digits());
m_xMtrWidth->set_value(fTmpWidth, FieldUnit::MM_100TH);
}
{ // #i75273# set height
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_HEIGHT );
mfOldHeight = std::max( pItem ? static_cast<double>(static_cast<const SfxUInt32Item*>(pItem)->GetValue()) : 0.0, 1.0 );
double fTmpHeight((OutputDevice::LogicToLogic(static_cast<sal_Int32>(mfOldHeight), mePoolUnit, MapUnit::Map100thMM)) / fUIScale);
if (m_xMtrHeight->get_digits())
fTmpHeight *= pow(10.0, m_xMtrHeight->get_digits());
m_xMtrHeight->set_value(fTmpHeight, FieldUnit::MM_100TH);
}
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_PROTECT_SIZE );
if ( pItem )
{
m_xTsbSizeProtect->set_active(static_cast<const SfxBoolItem*>(pItem)->GetValue());
}
else
m_xTsbSizeProtect->set_inconsistent(true);
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOWIDTH );
if ( pItem )
{
m_xTsbAutoGrowWidth->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue());
}
else
m_xTsbAutoGrowWidth->set_inconsistent(true);
pItem = GetItem( mrOutAttrs, SID_ATTR_TRANSFORM_AUTOHEIGHT );
if ( pItem )
{
m_xTsbAutoGrowHeight->set_active(static_cast<const SfxBoolItem*>( pItem )->GetValue());
}
else
m_xTsbAutoGrowHeight->set_inconsistent(true);
// Is matching set?
OUString aStr = GetUserData();
m_xCbxScale->set_active(aStr.toInt32() != 0);
m_xCbxScaleImg->set_from_icon_name(m_xCbxScale->get_active() ? RID_SVXBMP_LOCKED : RID_SVXBMP_UNLOCKED);
m_xMtrPosX->save_value();
m_xMtrPosY->save_value();
m_xMtrWidth->save_value();
m_xMtrHeight->save_value();
m_xTsbSizeProtect->save_state();
m_xTsbAutoGrowWidth->save_state();
m_xTsbAutoGrowHeight->save_state();
ClickSizeProtectHdl(*m_xTsbAutoGrowHeight);
// #i2379# Disable controls for protected objects
ChangeSizeProtectHdl(*m_xTsbSizeProtect);
}
std::unique_ptr<SfxTabPage> SvxPositionSizeTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rOutAttrs)
{
return std::make_unique<SvxPositionSizeTabPage>(pPage, pController, *rOutAttrs);
}
void SvxPositionSizeTabPage::ActivatePage( const SfxItemSet& rSet )
{
if( SfxRectangleItem const * pRectItem = rSet.GetItemIfSet( SID_ATTR_TRANSFORM_INTERN, false ) )
{
{ // #i75273#
const ::tools::Rectangle aTempRect(pRectItem->GetValue());
maRange = vcl::unotools::b2DRectangleFromRectangle(aTempRect);
}
SetMinMaxPosition();
}
}
DeactivateRC SvxPositionSizeTabPage::DeactivatePage( SfxItemSet* _pSet )
{
if( _pSet )
{
double fX(static_cast<double>(m_xMtrPosX->get_value(FieldUnit::NONE)));
double fY(static_cast<double>(m_xMtrPosY->get_value(FieldUnit::NONE)));
GetTopLeftPosition(fX, fY, maRange);
const ::tools::Rectangle aOutRectangle(
basegfx::fround<tools::Long>(fX), basegfx::fround<tools::Long>(fY),
basegfx::fround<tools::Long>(fX + maRange.getWidth()), basegfx::fround<tools::Long>(fY + maRange.getHeight()));
_pSet->Put(SfxRectangleItem(SID_ATTR_TRANSFORM_INTERN, aOutRectangle));
_pSet->Put(SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_POS,
m_xTsbPosProtect->get_state() == TRISTATE_TRUE ));
_pSet->Put(SfxBoolItem( SID_ATTR_TRANSFORM_PROTECT_SIZE,
m_xTsbSizeProtect->get_state() == TRISTATE_TRUE ));
FillItemSet(_pSet);
}
return DeactivateRC::LeavePage;
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangePosProtectHdl, weld::Toggleable&, void)
{
// #106572# Remember user's last choice
m_xTsbSizeProtect->set_state(m_xTsbPosProtect->get_state() == TRISTATE_TRUE ? TRISTATE_TRUE : mnProtectSizeState);
UpdateControlStates();
}
void SvxPositionSizeTabPage::UpdateControlStates()
{
const bool bPosProtect = m_xTsbPosProtect->get_state() == TRISTATE_TRUE;
const bool bSizeProtect = m_xTsbSizeProtect->get_state() == TRISTATE_TRUE;
const bool bHeightChecked = !mbIgnoreAutoGrowHeight && (m_xTsbAutoGrowHeight->get_active());
const bool bWidthChecked = !mbIgnoreAutoGrowWidth && (m_xTsbAutoGrowWidth->get_active());
m_xFlPosition->set_sensitive(!bPosProtect && !mbPageDisabled);
m_xTsbPosProtect->set_sensitive( !mbProtectDisabled && !mbPageDisabled );
m_xFlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect );
m_xFtWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
m_xMtrWidth->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bWidthChecked );
m_xFtHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
m_xMtrHeight->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked );
m_xCbxScale->set_sensitive( !mbSizeDisabled && !bSizeProtect && !bHeightChecked && !bWidthChecked );
m_xCtlSize->set_sensitive( !mbSizeDisabled && !bSizeProtect && (!bHeightChecked || !bWidthChecked) );
m_xFlProtect->set_sensitive( !mbProtectDisabled );
m_xTsbSizeProtect->set_sensitive( !mbProtectDisabled && !bPosProtect );
m_xFlAdjust->set_sensitive( !mbSizeDisabled && !bSizeProtect && !mbAdjustDisabled );
m_aCtlSize.Invalidate();
m_aCtlPos.Invalidate();
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeSizeProtectHdl, weld::Toggleable&, void)
{
if (m_xTsbSizeProtect->get_sensitive())
{
// #106572# Remember user's last choice
// Note: this works only as long as the dialog is open. When
// the user closes the dialog, there is no way to remember
// whether size was enabled or disabled before pos protect was
// clicked. Thus, if pos protect is selected, the dialog is
// closed and reopened again, unchecking pos protect will
// always uncheck size protect, too. That's life.
mnProtectSizeState = m_xTsbSizeProtect->get_state();
}
UpdateControlStates();
}
void SvxPositionSizeTabPage::SetMinMaxPosition()
{
// position
double fLeft(maWorkRange.getMinX());
double fTop(maWorkRange.getMinY());
double fRight(maWorkRange.getMaxX());
double fBottom(maWorkRange.getMaxY());
switch (m_aCtlPos.GetActualRP())
{
case RectPoint::LT:
{
fRight -= maRange.getWidth();
fBottom -= maRange.getHeight();
break;
}
case RectPoint::MT:
{
fLeft += maRange.getWidth() / 2.0;
fRight -= maRange.getWidth() / 2.0;
fBottom -= maRange.getHeight();
break;
}
case RectPoint::RT:
{
fLeft += maRange.getWidth();
fBottom -= maRange.getHeight();
break;
}
case RectPoint::LM:
{
fRight -= maRange.getWidth();
fTop += maRange.getHeight() / 2.0;
fBottom -= maRange.getHeight() / 2.0;
break;
}
case RectPoint::MM:
{
fLeft += maRange.getWidth() / 2.0;
fRight -= maRange.getWidth() / 2.0;
fTop += maRange.getHeight() / 2.0;
fBottom -= maRange.getHeight() / 2.0;
break;
}
case RectPoint::RM:
{
fLeft += maRange.getWidth();
fTop += maRange.getHeight() / 2.0;
fBottom -= maRange.getHeight() / 2.0;
break;
}
case RectPoint::LB:
{
fRight -= maRange.getWidth();
fTop += maRange.getHeight();
break;
}
case RectPoint::MB:
{
fLeft += maRange.getWidth() / 2.0;
fRight -= maRange.getWidth() / 2.0;
fTop += maRange.getHeight();
break;
}
case RectPoint::RB:
{
fLeft += maRange.getWidth();
fTop += maRange.getHeight();
break;
}
}
const double fMaxLong(vcl::ConvertValue(std::numeric_limits<sal_Int64>::max(), 0, MapUnit::Map100thMM, meDlgUnit) - 1);
fLeft = std::clamp(fLeft, -fMaxLong, fMaxLong);
fRight = std::clamp(fRight, -fMaxLong, fMaxLong);
fTop = std::clamp(fTop, - fMaxLong, fMaxLong);
fBottom = std::clamp(fBottom, -fMaxLong, fMaxLong);
// #i75273# normalizing when setting the min/max values was wrong, removed
m_xMtrPosX->set_range(basegfx::fround64(fLeft), basegfx::fround64(fRight), FieldUnit::NONE);
m_xMtrPosY->set_range(basegfx::fround64(fTop), basegfx::fround64(fBottom), FieldUnit::NONE);
// size
fLeft = maWorkRange.getMinX();
fTop = maWorkRange.getMinY();
fRight = maWorkRange.getMaxX();
fBottom = maWorkRange.getMaxY();
double fNewX(0);
double fNewY(0);
switch (m_aCtlSize.GetActualRP())
{
case RectPoint::LT:
{
fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
break;
}
case RectPoint::MT:
{
fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
break;
}
case RectPoint::RT:
{
fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
fNewY = maWorkRange.getHeight() - ( maRange.getMinY() - fTop );
break;
}
case RectPoint::LM:
{
fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
break;
}
case RectPoint::MM:
{
const double f1(maRange.getCenter().getX() - fLeft);
const double f2(fRight - maRange.getCenter().getX());
const double f3(std::min(f1, f2));
const double f4(maRange.getCenter().getY() - fTop);
const double f5(fBottom - maRange.getCenter().getY());
const double f6(std::min(f4, f5));
fNewX = f3 * 2.0;
fNewY = f6 * 3.0;
break;
}
case RectPoint::RM:
{
fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
fNewY = std::min( maRange.getCenter().getY() - fTop, fBottom - maRange.getCenter().getY() ) * 2.0;
break;
}
case RectPoint::LB:
{
fNewX = maWorkRange.getWidth() - ( maRange.getMinX() - fLeft );
fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
break;
}
case RectPoint::MB:
{
fNewX = std::min( maRange.getCenter().getX() - fLeft, fRight - maRange.getCenter().getX() ) * 2.0;
fNewY = maWorkRange.getHeight() - ( maRange.getMaxY() - fBottom );
break;
}
case RectPoint::RB:
{
fNewX = maWorkRange.getWidth() - ( fRight - maRange.getMaxX() );
fNewY = maWorkRange.getHeight() - ( fBottom - maRange.getMaxY() );
break;
}
}
// #i75273# normalizing when setting the min/max values was wrong, removed
m_xMtrWidth->set_max(basegfx::fround64(fNewX), FieldUnit::NONE);
m_xMtrHeight->set_max(basegfx::fround64(fNewY), FieldUnit::NONE);
}
void SvxPositionSizeTabPage::GetTopLeftPosition(double& rfX, double& rfY, const basegfx::B2DRange& rRange)
{
switch (m_aCtlPos.GetActualRP())
{
case RectPoint::LT:
{
break;
}
case RectPoint::MT:
{
rfX -= rRange.getCenter().getX() - rRange.getMinX();
break;
}
case RectPoint::RT:
{
rfX -= rRange.getWidth();
break;
}
case RectPoint::LM:
{
rfY -= rRange.getCenter().getY() - rRange.getMinY();
break;
}
case RectPoint::MM:
{
rfX -= rRange.getCenter().getX() - rRange.getMinX();
rfY -= rRange.getCenter().getY() - rRange.getMinY();
break;
}
case RectPoint::RM:
{
rfX -= rRange.getWidth();
rfY -= rRange.getCenter().getY() - rRange.getMinY();
break;
}
case RectPoint::LB:
{
rfY -= rRange.getHeight();
break;
}
case RectPoint::MB:
{
rfX -= rRange.getCenter().getX() - rRange.getMinX();
rfY -= rRange.getHeight();
break;
}
case RectPoint::RB:
{
rfX -= rRange.getWidth();
rfY -= rRange.getHeight();
break;
}
}
}
void SvxPositionSizeTabPage::PointChanged(weld::DrawingArea* pDrawingArea, RectPoint eRP)
{
if (pDrawingArea == m_aCtlPos.GetDrawingArea())
{
SetMinMaxPosition();
switch( eRP )
{
case RectPoint::LT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::MT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::RT:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMinY()), FieldUnit::NONE );
break;
}
case RectPoint::LM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::MM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::RM:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getCenter().getY()), FieldUnit::NONE );
break;
}
case RectPoint::LB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMinX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::MB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getCenter().getX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
case RectPoint::RB:
{
m_xMtrPosX->set_value( basegfx::fround64(maRange.getMaxX()), FieldUnit::NONE );
m_xMtrPosY->set_value( basegfx::fround64(maRange.getMaxY()), FieldUnit::NONE );
break;
}
}
}
else
{
meRP = eRP;
SetMinMaxPosition();
}
}
void SvxPositionSizeTabPage::DisableResize()
{
mbSizeDisabled = true;
}
void SvxPositionSizeTabPage::DisableProtect()
{
mbProtectDisabled = true;
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeWidthHdl, weld::MetricSpinButton&, void)
{
if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) )
return;
sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(m_xMtrWidth->get_value(FieldUnit::NONE))) / mfOldWidth));
sal_Int64 nMin, nMax;
m_xMtrHeight->get_range(nMin, nMax, FieldUnit::NONE);
if (nHeight <= nMax)
{
m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
}
else
{
nHeight = nMax;
m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
const sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(nHeight)) / mfOldHeight));
m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
}
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ChangeHeightHdl, weld::MetricSpinButton&, void)
{
if( !(m_xCbxScale->get_active() && m_xCbxScale->get_sensitive()) )
return;
sal_Int64 nWidth(basegfx::fround64((mfOldWidth * static_cast<double>(m_xMtrHeight->get_value(FieldUnit::NONE))) / mfOldHeight));
sal_Int64 nMin, nMax;
m_xMtrWidth->get_range(nMin, nMax, FieldUnit::NONE);
if (nWidth <= nMax)
{
m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
}
else
{
nWidth = nMax;
m_xMtrWidth->set_value(nWidth, FieldUnit::NONE);
const sal_Int64 nHeight(basegfx::fround64((mfOldHeight * static_cast<double>(nWidth)) / mfOldWidth));
m_xMtrHeight->set_value(nHeight, FieldUnit::NONE);
}
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickSizeProtectHdl, weld::Toggleable&, void)
{
UpdateControlStates();
}
IMPL_LINK_NOARG(SvxPositionSizeTabPage, ClickAutoHdl, weld::Toggleable&, void)
{
m_xCbxScaleImg->set_from_icon_name(m_xCbxScale->get_active() ? RID_SVXBMP_LOCKED : RID_SVXBMP_UNLOCKED);
if (m_xCbxScale->get_active())
{
mfOldWidth = std::max( static_cast<double>(GetCoreValue( *m_xMtrWidth, mePoolUnit )), 1.0 );
mfOldHeight = std::max( static_cast<double>(GetCoreValue( *m_xMtrHeight, mePoolUnit )), 1.0 );
}
}
void SvxPositionSizeTabPage::FillUserData()
{
// matching is saved in the Ini-file
OUString aStr = m_xCbxScale->get_active() ? u"1"_ustr : u"0"_ustr;
SetUserData( aStr );
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */