office-gobmx/sd/source/core/sdpage2.cxx

801 lines
26 KiB
C++
Raw Blame History

/*************************************************************************
*
* $RCSfile: sdpage2.cxx,v $
*
* $Revision: 1.9 $
*
* last change: $Author: aw $ $Date: 2001-08-06 08:34:08 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#ifndef SVX_LIGHT
#ifndef _SFXDOCFILE_HXX //autogen
#include <sfx2/docfile.hxx>
#endif
#endif // !SVX_LIGHT
#ifndef _SV_SVAPP_HXX
#include <vcl/svapp.hxx>
#endif
#ifndef _OUTLINER_HXX
#include <svx/outliner.hxx>
#endif
#ifndef _SVXLINK_HXX
#include <svx/linkmgr.hxx>
#endif
#ifndef _SVDOTEXT_HXX //autogen
#include <svx/svdotext.hxx>
#endif
#ifndef _URLOBJ_HXX //autogen
#include <tools/urlobj.hxx>
#endif
#ifndef _OUTLOBJ_HXX //autogen
#include <svx/outlobj.hxx>
#endif
#include <svtools/urihelper.hxx>
#pragma hdrstop
#include "sdresid.hxx"
#include "sdpage.hxx"
#include "glob.hxx"
#include "glob.hrc"
#include "drawdoc.hxx"
#include "stlpool.hxx"
#include "sdiocmpt.hxx"
#include "pglink.hxx"
#include "strmname.h"
#ifndef SVX_LIGHT
#ifdef MAC
#include "::ui:inc:strings.hrc"
#include "::ui:inc:docshell.hxx"
#else
#ifdef UNX
#include "../ui/inc/strings.hrc"
#include "../ui/inc/docshell.hxx"
#else
#include "..\ui\inc\cfgids.hxx"
#include "..\ui\inc\strings.hrc"
#include "..\ui\inc\docshell.hxx"
#endif
#endif
#endif // !SVX_LIGHT
// #90477#
#ifndef _TOOLS_TENCCVT_HXX
#include <tools/tenccvt.hxx>
#endif
using namespace ::com::sun::star;
/*************************************************************************
|*
|* SetPresentationLayout, setzt: Layoutnamen, Masterpage-Verkn<6B>pfung und
|* Vorlagen fuer Praesentationsobjekte
|*
|* Vorraussetzungen: - Die Seite muss bereits das richtige Model kennen!
|* - Die entsprechende Masterpage muss bereits im Model sein.
|* - Die entsprechenden StyleSheets muessen bereits im
|* im StyleSheetPool sein.
|*
|* bReplaceStyleSheets = TRUE : Benannte StyleSheets werden ausgetauscht
|* FALSE: Alle StyleSheets werden neu zugewiesen
|*
|* bSetMasterPage = TRUE : MasterPage suchen und zuweisen
|*
|* bReverseOrder = FALSE: MasterPages von vorn nach hinten suchen
|* TRUE : MasterPages von hinten nach vorn suchen (fuer Undo-Action)
|*
\************************************************************************/
void SdPage::SetPresentationLayout(const String& rLayoutName,
BOOL bReplaceStyleSheets,
BOOL bSetMasterPage,
BOOL bReverseOrder)
{
/*********************************************************************
|* Layoutname der Seite
\********************************************************************/
String aOldLayoutName(aLayoutName); // merken
aLayoutName = rLayoutName;
aLayoutName.AppendAscii( RTL_CONSTASCII_STRINGPARAM( SD_LT_SEPARATOR ));
aLayoutName += String(SdResId(STR_LAYOUT_OUTLINE));
/*********************************************************************
|* ggf. Masterpage suchen und setzen
\********************************************************************/
if (bSetMasterPage && !IsMasterPage())
{
SdPage* pMaster;
USHORT nMaster = 0;
USHORT nMasterCount = pModel->GetMasterPageCount();
if( !bReverseOrder )
{
for ( nMaster = 0; nMaster < nMasterCount; nMaster++ )
{
pMaster = (SdPage*)pModel->GetMasterPage(nMaster);
if (pMaster->GetPageKind() == ePageKind &&
pMaster->GetLayoutName() == aLayoutName)
{
break;
}
}
}
else
{
for ( nMaster = nMasterCount - 1; nMaster >= 0; nMaster-- )
{
pMaster = (SdPage*)pModel->GetMasterPage(nMaster);
if (pMaster->GetPageKind() == ePageKind &&
pMaster->GetLayoutName() == aLayoutName)
{
break;
}
}
}
DBG_ASSERT(nMaster < nMasterCount, "Masterpage nicht gefunden");
// falls es eine oder mehrere Masterpages gibt: die 1. ersetzen
if (GetMasterPageCount() > 0)
SetMasterPageNum(nMaster, 0);
// sonst: als 1. Masterpage einfuegen
else
InsertMasterPage(nMaster);
}
/*********************************************************************
|* Vorlagen fuer Praesentationsobjekte
\********************************************************************/
// Listen mit:
// - Vorlagenzeigern fuer Gliederungstextobjekt (alte und neue Vorlagen)
// -Replacedaten fuer OutlinerParaObject
List aOutlineStyles;
List aOldOutlineStyles;
List aReplList;
BOOL bListsFilled = FALSE;
ULONG nObjCount = GetObjCount();
for (ULONG nObj = 0; nObj < nObjCount; nObj++)
{
SdrTextObj* pObj = (SdrTextObj*) GetObj(nObj);
if (pObj->GetObjInventor() == SdrInventor &&
pObj->GetObjIdentifier() == OBJ_OUTLINETEXT)
{
if (!bListsFilled || !bReplaceStyleSheets)
{
String aFullName;
String aOldFullName;
SfxStyleSheetBase* pSheet = NULL;
SfxStyleSheetBasePool* pStShPool = pModel->GetStyleSheetPool();
for (USHORT i = 1; i < 10; i++)
{
aFullName = aLayoutName;
aOldFullName = aOldLayoutName;
aFullName += sal_Unicode( ' ' );
aFullName += String::CreateFromInt32( (sal_Int32)i );
aOldFullName += sal_Unicode( ' ' );
aOldFullName += String::CreateFromInt32( (sal_Int32)i );
pSheet = pStShPool->Find(aOldFullName, SD_LT_FAMILY);
DBG_ASSERT(pSheet, "alte Gliederungsvorlage nicht gefunden");
aOldOutlineStyles.Insert(pSheet, LIST_APPEND);
pSheet = pStShPool->Find(aFullName, SD_LT_FAMILY);
DBG_ASSERT(pSheet, "neue Gliederungsvorlage nicht gefunden");
aOutlineStyles.Insert(pSheet, LIST_APPEND);
if (bReplaceStyleSheets && pSheet)
{
// Replace anstatt Set
StyleReplaceData* pReplData = new StyleReplaceData;
pReplData->nNewFamily = pSheet->GetFamily();
pReplData->nFamily = pSheet->GetFamily();
pReplData->aNewName = aFullName;
pReplData->aName = aOldFullName;
aReplList.Insert(pReplData, LIST_APPEND);
}
else
{
( (SdrTextObj*) pObj)->GetOutlinerParaObject()->SetStyleSheets( i, aFullName, SD_LT_FAMILY );
}
}
bListsFilled = TRUE;
}
SfxStyleSheet* pSheet = (SfxStyleSheet*)aOutlineStyles.First();
SfxStyleSheet* pOldSheet = (SfxStyleSheet*)aOldOutlineStyles.First();
while (pSheet)
{
if (pSheet != pOldSheet)
{
pObj->EndListening(*pOldSheet);
if (!pObj->IsListening(*pSheet))
pObj->StartListening(*pSheet);
}
pSheet = (SfxStyleSheet*)aOutlineStyles.Next();
pOldSheet = (SfxStyleSheet*)aOldOutlineStyles.Next();
}
OutlinerParaObject* pOPO = ((SdrTextObj*)pObj)->GetOutlinerParaObject();
if ( bReplaceStyleSheets && pOPO )
{
StyleReplaceData* pReplData = (StyleReplaceData*) aReplList.First();
while( pReplData )
{
pOPO->ChangeStyleSheets( pReplData->aName, pReplData->nFamily, pReplData->aNewName, pReplData->nNewFamily );
pReplData = (StyleReplaceData*) aReplList.Next();
}
}
}
else if (pObj->GetObjInventor() == SdrInventor &&
pObj->GetObjIdentifier() == OBJ_TITLETEXT)
{
// PresObjKind nicht ueber GetPresObjKind() holen, da dort nur
// die PresObjListe beruecksichtigt wird. Es sollen aber alle
// "Titelobjekte" hier beruecksichtigt werden (Paste aus Clipboard usw.)
SfxStyleSheet* pSheet = GetStyleSheetForPresObj(PRESOBJ_TITLE);
if (pSheet)
pObj->SetStyleSheet(pSheet, TRUE);
}
else
{
SfxStyleSheet* pSheet = GetStyleSheetForPresObj(GetPresObjKind(pObj));
if (pSheet)
pObj->SetStyleSheet(pSheet, TRUE);
}
}
for (ULONG i = 0; i < aReplList.Count(); i++)
{
delete (StyleReplaceData*) aReplList.GetObject(i);
}
}
/*************************************************************************
|*
|* das Gliederungstextobjekt bei den Vorlagen fuer die Gliederungsebenen
|* abmelden
|*
\************************************************************************/
void SdPage::EndListenOutlineText()
{
SdrObject* pOutlineTextObj = GetPresObj(PRESOBJ_OUTLINE);
if (pOutlineTextObj)
{
SdStyleSheetPool* pSPool = (SdStyleSheetPool*)pModel->GetStyleSheetPool();
DBG_ASSERT(pSPool, "StyleSheetPool nicht gefunden");
String aTrueLayoutName(aLayoutName);
aTrueLayoutName.Erase( aTrueLayoutName.SearchAscii( SD_LT_SEPARATOR ));
List* pOutlineStyles = pSPool->CreateOutlineSheetList(aTrueLayoutName);
for (SfxStyleSheet* pSheet = (SfxStyleSheet*)pOutlineStyles->First();
pSheet;
pSheet = (SfxStyleSheet*)pOutlineStyles->Next())
{
pOutlineTextObj->EndListening(*pSheet);
}
delete pOutlineStyles;
}
}
/*************************************************************************
|*
|* schreibt Member der SdPage
|*
\************************************************************************/
#ifndef SVX_LIGHT
void __EXPORT SdPage::WriteData(SvStream& rOut) const
{
FmFormPage::WriteData( rOut );
// #90477# rOut.SetStreamCharSet( ::GetStoreCharSet( gsl_getSystemTextEncoding()));
rOut.SetStreamCharSet(GetSOStoreTextEncoding(gsl_getSystemTextEncoding(), (sal_uInt16)rOut.GetVersion()));
if ( pModel->IsStreamingSdrModel() )
{
// Es wird nur das SdrModel gestreamt, nicht das SdDrawDocument!
// Anwendungsfall: svdraw Clipboard-Format
return;
}
// letzter Parameter ist die aktuelle Versionsnummer des Codes
SdIOCompat aIO(rOut, STREAM_WRITE, 7);
BOOL bDummy = TRUE;
BOOL bManual = ( PRESCHANGE_MANUAL == ePresChange ); // nur der Kompat.halber
rOut<<bDummy; // ehem. bTemplateMode
rOut<<bDummy; // ehem. bBackgroundMode
rOut<<bDummy; // ehem. bOutlineMode
UINT16 nUI16Temp = (UINT16) eAutoLayout;
rOut << nUI16Temp;
// Selektionskennung ist nicht persistent, wird nicht geschrieben
ULONG nULTemp;
nULTemp = (ULONG)eFadeSpeed;
rOut << nULTemp;
nULTemp = (ULONG)eFadeEffect;
rOut << nULTemp;
rOut << bManual;
rOut << nTime;
rOut << bSoundOn;
rOut << bExcluded;
rOut.WriteByteString( aLayoutName );
// Liste der Praesentationsobjekt abspeichern
UINT32 nUserCallCount = 0;
UINT32 nCount = (UINT32)aPresObjList.Count();
UINT32 nValidCount = nCount;
// NULL-Pointer rauszaehlen. Eigentlich haben die nichts in der Liste
// verloren, aber es gibt leider Kundenfiles, in denen so was vorkommt.
for (UINT32 nObj = 0; nObj < nCount; nObj++)
{
SdrObject* pObj = (SdrObject*)aPresObjList.GetObject(nObj);
if (!pObj)
nValidCount--;
}
rOut << nValidCount;
for (nObj = 0; nObj < nCount; nObj++)
{
SdrObject* pObj = (SdrObject*)aPresObjList.GetObject(nObj);
if (pObj)
{
rOut << pObj->GetOrdNum();
if ( ( (SdPage*) pObj->GetUserCall() ) == this)
{
nUserCallCount++;
}
}
}
nUI16Temp = (UINT16)ePageKind;
rOut << nUI16Temp;
// Liste der Praesentationsobjekt abspeichern,
// welche einen UserCall auf die Seite haben
rOut << nUserCallCount;
for (nObj = 0; nObj < nCount; nObj++)
{
SdrObject* pObj = (SdrObject*)aPresObjList.GetObject(nObj);
if ( pObj && ( (SdPage*) pObj->GetUserCall() ) == this)
{
rOut << pObj->GetOrdNum();
}
}
// #90477# INT16 nI16Temp = ::GetStoreCharSet( gsl_getSystemTextEncoding() ); // .EXEs vor 303 werten den aus
INT16 nI16Temp = GetSOStoreTextEncoding(gsl_getSystemTextEncoding(), (sal_uInt16)rOut.GetVersion());
rOut << nI16Temp;
rOut.WriteByteString( INetURLObject::AbsToRel(aSoundFile,
INetURLObject::WAS_ENCODED,
INetURLObject::DECODE_UNAMBIGUOUS));
rOut.WriteByteString( INetURLObject::AbsToRel(aFileName,
INetURLObject::WAS_ENCODED,
INetURLObject::DECODE_UNAMBIGUOUS));
rOut.WriteByteString( aBookmarkName );
UINT16 nPaperBinTemp = nPaperBin;
rOut << nPaperBinTemp;
UINT16 nOrientationTemp = (UINT16) eOrientation;
rOut << nOrientationTemp;
UINT16 nPresChangeTemp = (UINT16) ePresChange; // ab 370 (IO-Version 7)
rOut << nPresChangeTemp;
}
#endif // !SVX_LIGHT
/*************************************************************************
|*
|* liest Member der SdPage
|*
\************************************************************************/
void __EXPORT SdPage::ReadData(const SdrIOHeader& rHead, SvStream& rIn)
{
FmFormPage::ReadData( rHead, rIn );
// #90477# rIn.SetStreamCharSet( ::GetStoreCharSet( gsl_getSystemTextEncoding()));
rIn.SetStreamCharSet(GetSOLoadTextEncoding(gsl_getSystemTextEncoding(), (sal_uInt16)rIn.GetVersion()));
if ( pModel->IsStreamingSdrModel() )
{
// Es wird nur das SdrModel gestreamt, nicht das SdDrawDocument!
// Anwendungsfall: svdraw Clipboard-Format
return;
}
SdIOCompat aIO(rIn, STREAM_READ);
BOOL bDummy;
BOOL bManual;
rIn>>bDummy; // ehem. bTemplateMode
rIn>>bDummy; // ehem. bBackgroundMode
rIn>>bDummy; // ehem. bOutlineMode
UINT16 nAutoLayout;
rIn>>nAutoLayout;
eAutoLayout = (AutoLayout) nAutoLayout;
// Selektionskennung ist nicht persistent, wird nicht gelesen
ULONG nULTemp;
rIn >> nULTemp; eFadeSpeed = (FadeSpeed)nULTemp;
rIn >> nULTemp; eFadeEffect = (presentation::FadeEffect)nULTemp;
rIn >> bManual;
rIn >> nTime;
rIn >> bSoundOn;
rIn >> bExcluded;
rIn.ReadByteString( aLayoutName );
// Liste der Praesentationsobjekt einlesen
if (IsObjOrdNumsDirty()) // Ordnungsnummern muessen dafuer stimmen
RecalcObjOrdNums();
UINT32 nCount;
UINT32 nOrdNum;
rIn >> nCount;
for (UINT32 nObj = 0; nObj < nCount; nObj++)
{
rIn >> nOrdNum;
SdrObject* pObj = GetObj(nOrdNum);
aPresObjList.Insert(pObj, LIST_APPEND);
}
// ab hier werden Daten der Versionen >=1 eingelesen
if (aIO.GetVersion() >= 1)
{
UINT16 nPageKind;
rIn >> nPageKind;
ePageKind = (PageKind) nPageKind;
}
// ab hier werden Daten der Versionen >=2 eingelesen
if (aIO.GetVersion() >=2)
{
UINT32 nUserCallCount;
UINT32 nUserCallOrdNum;
rIn >> nUserCallCount;
for (UINT32 nObj = 0; nObj < nUserCallCount; nObj++)
{
rIn >> nUserCallOrdNum;
SdrObject* pObj = GetObj(nUserCallOrdNum);
if (pObj)
pObj->SetUserCall(this);
}
}
// ab hier werden Daten der Versionen >=3 eingelesen
if (aIO.GetVersion() >=3)
{
INT16 nCharSet;
rIn >> nCharSet; // nur Einlesen, Konvertierung ab 303 durch Stream
// #90477# eCharSet = (CharSet) nCharSet;
eCharSet = (CharSet)GetSOLoadTextEncoding((rtl_TextEncoding)nCharSet, (sal_uInt16)rIn.GetVersion());
String aSoundFileRel;
rIn.ReadByteString( aSoundFileRel );
INetURLObject aURLObj(::URIHelper::SmartRelToAbs(aSoundFileRel, FALSE,
INetURLObject::WAS_ENCODED,
INetURLObject::DECODE_UNAMBIGUOUS));
aSoundFile = aURLObj.GetMainURL( INetURLObject::NO_DECODE );
}
// ab hier werden Daten der Versionen >=4 eingelesen
if (aIO.GetVersion() >=4)
{
String aFileNameRel;
rIn.ReadByteString( aFileNameRel );
INetURLObject aURLObj(::URIHelper::SmartRelToAbs(aFileNameRel, FALSE,
INetURLObject::WAS_ENCODED,
INetURLObject::DECODE_UNAMBIGUOUS));
aFileName = aURLObj.GetMainURL( INetURLObject::NO_DECODE );
rIn.ReadByteString( aBookmarkName );
}
// ab hier werden Daten der Versionen >=5 eingelesen
if (aIO.GetVersion() >=5)
{
UINT16 nPaperBinTemp;
rIn >> nPaperBinTemp;
nPaperBin = nPaperBinTemp;
}
// ab hier werden Daten der Versionen >=6 eingelesen
if (aIO.GetVersion() >=6)
{
UINT16 nOrientationTemp;
rIn >> nOrientationTemp;
eOrientation = (Orientation) nOrientationTemp;
}
else
{
// In aelteren Versionen wird die Orientation aus der Seitengroesse bestimmt
Size aPageSize(GetSize());
if (aPageSize.Width() > aPageSize.Height())
{
eOrientation = ORIENTATION_LANDSCAPE;
}
else
{
eOrientation = ORIENTATION_PORTRAIT;
}
}
// ab hier werden Daten der Versionen >=7 eingelesen
if( aIO.GetVersion() >= 7 )
{
UINT16 nPresChangeTemp;
rIn >> nPresChangeTemp;
ePresChange = (PresChange) nPresChangeTemp;
}
else
ePresChange = ( bManual ? PRESCHANGE_MANUAL : PRESCHANGE_AUTO );
}
/*************************************************************************
|*
|* Neues Model setzen
|*
\************************************************************************/
void __EXPORT SdPage::SetModel(SdrModel* pNewModel)
{
#ifndef SVX_LIGHT
DisconnectLink();
#endif
// Model umsetzen
FmFormPage::SetModel(pNewModel);
#ifndef SVX_LIGHT
ConnectLink();
#endif
}
/*************************************************************************
|*
|* Ist die Seite read-only?
|*
\************************************************************************/
FASTBOOL __EXPORT SdPage::IsReadOnly() const
{
BOOL bReadOnly = FALSE;
if (pPageLink)
{
// Seite ist gelinkt
// bReadOnly = TRUE wuerde dazu fuehren, dass diese Seite nicht
// bearbeitet werden kann. Dieser Effekt ist jedoch z.Z. nicht
// gewuenscht, daher auskommentiert:
// bReadOnly = TRUE;
}
return (bReadOnly);
}
/*************************************************************************
|*
|* Beim LinkManager anmelden
|*
\************************************************************************/
#ifndef SVX_LIGHT
void SdPage::ConnectLink()
{
SvxLinkManager* pLinkManager = pModel!=NULL ? pModel->GetLinkManager() : NULL;
if (pLinkManager && !pPageLink && aFileName.Len() && aBookmarkName.Len() &&
ePageKind==PK_STANDARD && !IsMasterPage() &&
( (SdDrawDocument*) pModel)->IsNewOrLoadCompleted())
{
/**********************************************************************
* Anmelden
* Nur Standardseiten duerfen gelinkt sein
**********************************************************************/
SdDrawDocShell* pDocSh = ((SdDrawDocument*) pModel)->GetDocSh();
if (!pDocSh || pDocSh->GetMedium()->GetOrigURL() != aFileName)
{
// Keine Links auf Dokument-eigene Seiten!
pPageLink = new SdPageLink(this, aFileName, aBookmarkName);
String aFilterName(SdResId(STR_IMPRESS));
pLinkManager->InsertFileLink(*pPageLink, OBJECT_CLIENT_FILE,
aFileName, &aFilterName, &aBookmarkName);
pPageLink->Connect();
}
}
}
#endif // !SVX_LIGHT
/*************************************************************************
|*
|* Beim LinkManager abmelden
|*
\************************************************************************/
#ifndef SVX_LIGHT
void SdPage::DisconnectLink()
{
SvxLinkManager* pLinkManager = pModel!=NULL ? pModel->GetLinkManager() : NULL;
if (pLinkManager && pPageLink)
{
/**********************************************************************
* Abmelden
* (Bei Remove wird *pGraphicLink implizit deleted)
**********************************************************************/
pLinkManager->Remove(pPageLink);
pPageLink=NULL;
}
}
#endif // !SVX_LIGHT
/*************************************************************************
|*
|* Copy-Ctor
|*
\************************************************************************/
SdPage::SdPage(const SdPage& rSrcPage) :
FmFormPage(rSrcPage)
{
ePageKind = rSrcPage.ePageKind;
eAutoLayout = rSrcPage.eAutoLayout;
bOwnArrangement = FALSE;
UINT32 nCount = (UINT32) rSrcPage.aPresObjList.Count();
for (UINT32 nObj = 0; nObj < nCount; nObj++)
{
// Liste der Praesenationsobjekte fuellen
SdrObject* pSrcObj = (SdrObject*) rSrcPage.aPresObjList.GetObject(nObj);
if (pSrcObj)
{
aPresObjList.Insert(GetObj(pSrcObj->GetOrdNum()), LIST_APPEND);
}
}
bSelected = FALSE;
eFadeSpeed = rSrcPage.eFadeSpeed;
eFadeEffect = rSrcPage.eFadeEffect;
ePresChange = rSrcPage.ePresChange;
nTime = rSrcPage.nTime;
bSoundOn = rSrcPage.bSoundOn;
bExcluded = rSrcPage.bExcluded;
aLayoutName = rSrcPage.aLayoutName;
aSoundFile = rSrcPage.aSoundFile;
aCreatedPageName = String();
aFileName = rSrcPage.aFileName;
aBookmarkName = rSrcPage.aBookmarkName;
bScaleObjects = rSrcPage.bScaleObjects;
bBackgroundFullSize = rSrcPage.bBackgroundFullSize;
eCharSet = rSrcPage.eCharSet;
nPaperBin = rSrcPage.nPaperBin;
eOrientation = rSrcPage.eOrientation;
pPageLink = NULL; // Wird beim Einfuegen ueber ConnectLink() gesetzt
}
/*************************************************************************
|*
|* Clone
|*
\************************************************************************/
SdrPage* SdPage::Clone() const
{
SdPage* pPage = new SdPage(*this);
return(pPage);
}
/*************************************************************************
|*
|* GetTextStyleSheetForObject
|*
\************************************************************************/
SfxStyleSheet* SdPage::GetTextStyleSheetForObject( SdrObject* pObj ) const
{
const PresObjKind eKind = ((SdPage*)this)->GetPresObjKind(pObj);
if( eKind != PRESOBJ_NONE )
{
return ((SdPage*)this)->GetStyleSheetForPresObj(eKind);
}
return FmFormPage::GetTextStyleSheetForObject( pObj );
}