office-gobmx/dbaccess/source/ui/querydesign/query.src
Release Engineers cb1400a076 CWS-TOOLING: integrate CWS dba32c
2009-06-29 20:53:25 +0200 fs  r273484 : #i103138# Rectangle conversion
2009-06-29 20:51:50 +0200 fs  r273483 : #i103138# yet more refactoring, now also setting the proper zoom level at the proper point in time
2009-06-29 13:40:26 +0200 fs  r273470 : added svn:ignore to ignore output paths
2009-06-29 10:08:54 +0200 fs  r273455 : #i103138#
refactored the code for positioning/zooming the control
Basically, we now allow adjustControlGeometry_throw (formerly known as positionControl_throw and setControlZoom) to
take an additional ViewTransformation parameter, describing the transformation to obtain the actual
control position/size. Consequently, positionControl itself also allows for a ViewTransformation parameter.
This has become necessary since during painting, the device which we created our control for might not necessarily
have a proper MapMode set. In this case, if we would use this map mode for calculating the control's position/size,
this would lead to wrong results.
Note that this problem was introduced by the fix for #i101398#: During the fix, we postponed the control creation
to a later time (when it is really needed). At this later time, the MapMode at the device is broken, at the earlier
time where we formerly crearted the control (createPrimitive2DSequence), it is not yet broken.
Whether or not the MapMode is defined as "broken" might depend on one's point of view, however ...
I consider it broken, since:
- we need the map mode to obtain the proper zoom level, which is to be forwarded to the control
- there are scenarios where the MapMode is *not* set to MAP_PIXEL (in those scenarios, everything works
  fine), and there are scenarios where it *is* set to MAP_PIXEL (in those the bug 103138 appears).
It somehow feels wrong that one cannot rely on the device's map mode this way, but on the other hand
one has no possibility to obtain the current zoom by other means.
Note that one issue (still to be submitted) is left: In the page pane of a Draw/Impress document, controls
have a wrong text size. This is because in this pane, the above-mentioned "broken" map mode is used,
which means the controls have a zoom of "1:1" set, which is wrong here.
2009-06-25 13:41:35 +0200 msc  r273380 : #100000# the tabs changed die to new properties
2009-06-24 12:42:40 +0200 msc  r273330 : #102082# remove issue warning
2009-06-22 10:43:14 +0200 fs  r273201 : createPrimitive2DSequence: care for being disposed
2009-06-18 12:35:13 +0200 oj  r273109 : #i102305# make nooptfiles for gcc
2009-06-17 12:14:37 +0200 oj  r273056 : #i102305# fix for linux
2009-06-17 07:20:22 +0200 oj  r273046 : #i102305# move ValueTransfer into the for loop to avoid a crash under Linux
2009-06-17 07:17:28 +0200 oj  r273045 : #i102305# use varchar
2009-06-15 14:11:27 +0200 fs  r272983 : added since tag
2009-06-15 12:11:39 +0200 oj  r272973 : #i102305# SAL_DLLPUBLIC_EXPORT inserted
2009-06-15 11:08:53 +0200 fs  r272969 : #i10000#
2009-06-15 09:25:13 +0200 fs  r272963 : merging fix for P1 issue #i102701#
2009-06-11 11:31:24 +0200 fs  r272858 : #i10000# copied the fix which before the rebase was done in ../dialog/macropg.src
2009-06-11 09:38:14 +0200 fs  r272846 : CWS-TOOLING: rebase CWS dba32c to trunk@272827 (milestone: DEV300:m50)
2009-06-02 09:53:10 +0200 fs  r272483 : #i10000#
2009-05-29 15:55:03 +0200 fs  r272465 : #i100818#
2009-05-29 12:58:43 +0200 fs  r272452 : don't apply comphelper::getString on possibly VOID any
2009-05-29 10:38:35 +0200 oj  r272437 : #i101519# handle where condition
2009-05-29 09:53:39 +0200 fs  r272434 : #i100818# call into releaseStubs /without/ locked GlobalMutex
2009-05-28 07:53:44 +0200 oj  r272375 : #i101369# parse tree changed
2009-05-27 14:53:36 +0200 fs  r272347 : #i10000#
2009-05-27 09:29:15 +0200 oj  r272327 : #i101626# check for double before hard cast
2009-05-27 09:13:58 +0200 oj  r272326 : #i101626# handle void correctly
2009-05-27 08:04:39 +0200 oj  r272321 : #i102256# wrong method signature used
2009-05-27 07:55:52 +0200 oj  r272320 : #i101519# look up parameter typ if used in function
2009-05-27 06:49:07 +0200 oj  r272319 : #i101519# set parameter from rowset as well
2009-05-26 13:30:56 +0200 oj  r272297 : #i101987# impl XBatchExecution
2009-05-26 12:44:34 +0200 oj  r272293 : #i101700# check if group is not set
2009-05-26 12:16:53 +0200 oj  r272290 : #i101369# resolved some reduce7reduce problems with boolean_term and search_condition
2009-05-26 12:12:42 +0200 oj  r272289 : #i101369# fix for or on one line criteria
2009-05-25 16:02:25 +0200 fs  r272257 : #i999704# +PROPERTY_MOUSE_WHEEL_BEHAVIOR
2009-05-25 16:01:55 +0200 fs  r272256 : merging the changes from CWS dba32b herein
2009-05-25 15:49:57 +0200 fs  r272254 : #i999704#
2009-05-25 15:32:57 +0200 fs  r272252 : #i99704# grid columns also to respect the MouseWheelBehavior property
2009-05-25 15:23:43 +0200 fs  r272251 : don't pass empty Anys to ::comphelper::getString
2009-05-25 14:48:43 +0200 fs  r272248 : merged changes from CWS dba32b herein
2009-05-25 14:44:40 +0200 fs  r272247 : #i99704# support new MouseWheelBehavior property
2009-05-25 14:43:18 +0200 fs  r272246 : #i99704# WheelWithoutFocus (peer property) superseded by MouseWheelBehavior (model property)
2009-05-25 14:41:03 +0200 fs  r272245 : #i99704# no need to set the mouse wheel behavior at the peer, this is now a model property, having the right default
2009-05-25 14:39:31 +0200 fs  r272243 : removed dead import
2009-05-25 14:35:36 +0200 fs  r272242 : the new EnableVisible doesn't make sense for grid columns
2009-05-25 14:34:33 +0200 fs  r272241 : #i99704# +MouseWheelBehavior - allow to enable/disable the mouse wheel for the control, or make it focus-dependent
2009-05-25 14:26:11 +0200 fs  r272240 : #i99704# change MouseSettings wheel flag (NoWheelActionWithoutFocus) to a three-state option, allowing to completely ignore the mouse wheel
2009-05-23 21:35:59 +0200 fs  r272213 : localize 'sub component opened/closed' event
2009-05-22 21:42:47 +0200 fs  r272211 : #i102003#
2009-05-22 21:42:20 +0200 fs  r272210 : grammar
2009-05-22 21:36:10 +0200 fs  r272209 : #i102140# load only once, not twice, and show error messages during loading (and during any form action, that is) asynchronously
2009-05-22 21:35:11 +0200 fs  r272208 : #i102140# +clear
2009-05-22 14:50:30 +0200 fs  r272194 : #i102139# for newly created DB docs, set the MacroExecutionMode to USE_CONFIG
2009-05-22 12:03:42 +0200 fs  r272180 : #i88878#
provided by noel.power@novell.com
implement a visibility property (EnableVisible) for toolkit controls, and usage in forms and UNO dialogs
2009-05-15 15:37:31 +0200 fs  r271942 : #i100671# corrected some @since tags, so autodoc has better chances of correctly reading them
2009-05-15 15:33:11 +0200 fs  r271940 : don't call comphelper::getFOO for VOID values
2009-05-15 15:08:31 +0200 fs  r271937 : includes
2009-05-15 13:39:22 +0200 fs  r271934 : #i101398# createPrimitive2DSequence: when we already have a control, use the old code. In particular, call positionControlForPaint
2009-05-15 12:33:48 +0200 fs  r271933 : make the geometry a part of the ControlPrimitive2D's identity
2009-05-15 10:15:44 +0200 fs  r271928 : #i10000#
2009-05-14 20:55:38 +0200 fs  r271921 : #i101398# don't reuse the name PRIMITIVE_ID_CONTROLPRIMITIVE2D, make the name of our own ControlPrimitive2D unique
2009-05-14 20:55:31 +0200 fs  r271920 : #i101398# don't reuse the name PRIMITIVE_ID_CONTROLPRIMITIVE2D, make the name of our own ControlPrimitive2D unique
2009-05-14 20:23:23 +0200 fs  r271919 : #i101622#
2009-05-14 16:04:38 +0200 fs  r271898 : don't use comphelper::getInt32 on voids
2009-05-14 16:04:12 +0200 fs  r271897 : merge fix for issue whose number just slipped my memory ... (originally fixed in CWS dba32b)
2009-05-14 15:36:55 +0200 fs  r271895 : merging changes from DEV300:m48
2009-05-07 14:43:19 +0200 fs  r271670 : #i101477#
2009-05-07 14:37:30 +0200 fs  r271668 : #i101477#
2009-05-07 09:27:30 +0200 oj  r271628 : #i101343# remove pch
2009-05-06 09:36:02 +0200 fs  r271568 : getFoo: diagnostics
2009-05-04 09:23:06 +0200 oj  r271438 : CWS-TOOLING: rebase CWS dba32c to trunk@271427 (milestone: DEV300:m47)
2009-04-29 23:18:13 +0200 fs  r271394 : #i101398# use a dedicated 2DPrimitive for UNO Controls, which is able to provide the B2DRange *without* actually creating the control
2009-04-29 13:52:25 +0200 fs  r271366 : #i101308#
2009-07-03 14:21:50 +00:00

426 lines
9.5 KiB
Text

/*************************************************************************
*
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* Copyright 2008 by Sun Microsystems, Inc.
*
* OpenOffice.org - a multi-platform office productivity suite
*
* $RCSfile: query.src,v $
* $Revision: 1.99 $
*
* This file is part of OpenOffice.org.
*
* OpenOffice.org is free software: you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License version 3
* only, as published by the Free Software Foundation.
*
* OpenOffice.org is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU Lesser General Public License version 3 for more details
* (a copy is included in the LICENSE file that accompanied this code).
*
* You should have received a copy of the GNU Lesser General Public License
* version 3 along with OpenOffice.org. If not, see
* <http://www.openoffice.org/license.html>
* for a copy of the LGPLv3 License.
*
************************************************************************/
#ifndef _DBU_QRY_HRC_
#include "dbu_qry.hrc"
#endif
#ifndef DBAUI_QUERY_HRC
#include "Query.hrc"
#endif
#ifndef _GLOBLMN_HRC
#include <svx/globlmn.hrc>
#endif
#ifndef _CNTIDS_HRC
#include <sfx2/cntids.hrc>
#endif
#ifndef DBACCESS_UI_BROWSER_ID_HXX
#include "browserids.hxx"
#endif
#ifndef _DBA_DBACCESS_HELPID_HRC_
#include "dbaccess_helpid.hrc"
#endif
#ifndef DBAUI_TOOLBOX_HXX
#include "toolbox.hrc"
#endif
#define MN_EDIT 20
#define MN_VIEW 21
#define MN_EXTRA 22
#define MN_INSERT 23
#define MN_WIN 30
#define MN_HELP 31
Menu RID_MENU_JOINVIEW_CONNECTION
{
ItemList =
{
MenuItem
{
ITEM_EDIT_DELETE
};
MenuItem
{
MID_DBUI_QUERY_EDIT_JOINCONNECTION
};
};
};
Menu RID_MENU_JOINVIEW_TABLE
{
ItemList =
{
MenuItem
{
ITEM_EDIT_DELETE
};
};
};
Menu RID_QUERYCOLPOPUPMENU
{
ItemList =
{
MenuItem
{
MID_COLUMN_WIDTH
};
MenuItem
{
Separator = TRUE ;
};
MenuItem
{
ITEM_EDIT_DELETE
};
};
};
ImageList IMG_JOINS
{
Prefix = "jo";
MaskColor = Color {
Red = 0xffff;
Green = 0x0000;
Blue = 0xffff;
};
IdList = {
IMG_PRIMARY_KEY; IMG_FOREIGN_KEY;
};
IdCount = { 2; };
};
ImageList IMG_JOINS_H
{
Prefix = "joh";
MaskColor = Color {
Red = 0xffff;
Green = 0x0000;
Blue = 0xffff;
};
IdList = {
IMG_PRIMARY_KEY; IMG_FOREIGN_KEY;
};
IdCount = { 2; };
};
String STR_QUERY_UNDO_TABWINSHOW
{
Text [ en-US ] = "Add Table Window" ;
};
String STR_QUERY_UNDO_MOVETABWIN
{
Text [ en-US ] = "Move table window" ;
};
String STR_QUERY_UNDO_INSERTCONNECTION
{
Text [ en-US ] = "Insert Join" ;
};
String STR_QUERY_UNDO_REMOVECONNECTION
{
Text [ en-US ] = "Delete Join" ;
};
String STR_QUERY_UNDO_SIZETABWIN
{
Text [ en-US ] = "Resize table window" ;
};
String STR_QUERY_UNDO_TABFIELDDELETE
{
Text [ en-US ] = "Delete Column" ;
};
String STR_QUERY_UNDO_TABFIELDMOVED
{
Text [ en-US ] = "Move column";
};
String STR_QUERY_UNDO_TABFIELDCREATE
{
Text [ en-US ] = "Add Column" ;
};
String RID_STR_TABLE_DOESNT_EXIST
{
Text [ en-US ] = "Invalid expression, table '$name$' does not exist.";
};
String RID_STR_FIELD_DOESNT_EXIST
{
Text [ en-US ] = "Invalid expression, field name '$name$' does not exist.";
};
String RID_STR_TOMUCHTABLES
{
Text [ en-US ] = "The query covers #num# tables. The selected database type, however, can only process a maximum of #maxnum# table(s) per statement.";
};
String STR_QUERY_UNDO_TABWINDELETE
{
Text [ en-US ] = "Delete Table Window" ;
};
String STR_QUERY_UNDO_MODIFY_CELL
{
Text [ en-US ] = "Edit Column Description";
};
String STR_QUERY_UNDO_SIZE_COLUMN
{
Text [ en-US ] = "Adjust column width";
};
String STR_QUERY_SORTTEXT
{
Text [ en-US ] = "(not sorted);ascending;descending" ;
};
String STR_QUERY_FUNCTIONS
{
Text [ en-US ] = "(no function);Group";
};
String STR_QUERY_NOTABLE
{
Text [ en-US ] = "(no table)";
};
String STR_QRY_ORDERBY_UNRELATED
{
Text [ en-US ] = "The database only supports sorting for visible fields.";
};
Menu RID_QUERYFUNCTION_POPUPMENU
{
ItemList =
{
MenuItem
{
Identifier = ID_QUERY_FUNCTION ;
HelpID = HID_QUERY_FUNCTION;
Text [ en-US ] = "Functions";
};
MenuItem
{
Separator = TRUE ;
};
MenuItem
{
Identifier = ID_QUERY_TABLENAME ;
HelpID = HID_QUERY_TABLENAME ;
Text [ en-US ] = "Table Name";
};
MenuItem
{
Identifier = ID_QUERY_ALIASNAME ;
HelpID = HID_QUERY_ALIASNAME ;
Text [ en-US ] = "Alias";
};
MenuItem
{
Separator = TRUE;
};
MenuItem
{
Identifier = ID_QUERY_DISTINCT ;
HelpID = HID_QUERY_DISTINCT ;
Text [ en-US ] = "Distinct Values";
};
};
};
String STR_QUERY_HANDLETEXT
{
Text [ en-US ] = "Field;Alias;Table;Sort;Visible;Function;Criterion;Or;Or";
};
String STR_QRY_TOO_MANY_COLUMNS
{
Text [ en-US ] = "There are too many columns.";
};
ErrorBox ERR_QRY_CRITERIA_ON_ASTERISK
{
Message [ en-US ] = "A condition cannot be applied to field [*]" ;
};
String STR_QRY_TOO_LONG_STATEMENT
{
Text [ en-US ] = "The SQL statement created is too long.";
};
String STR_QRY_TOOCOMPLEX
{
Text [ en-US ] = "Query is too complex" ;
};
String STR_QRY_NOSELECT
{
Text [ en-US ] = "Nothing has been selected." ;
};
String STR_QRY_TOOMANYCOND
{
Text [ en-US ] = "Too many search criteria" ;
};
String STR_QRY_SYNTAX
{
Text [ en-US ] = "SQL syntax error" ;
};
ErrorBox ERR_QRY_ORDERBY_ON_ASTERISK
{
Message [ en-US ] = "[*] cannot be used as a sort criterion.";
};
String STR_QUERY_TRUE
{
Text [ en-US ] = "TRUE" ;
};
String STR_QUERY_FALSE
{
Text [ en-US ] = "FALSE" ;
};
String STR_QRY_TOO_MANY_TABLES
{
Text [ en-US ] = "There are too many tables.";
};
String STR_QRY_NATIVE
{
Text [ en-US ] = "The statement will not be applied when querying in the SQL dialect of the database." ;
};
ErrorBox ERR_QRY_AMB_FIELD
{
Message [ en-US ] = "Field name not found or not unique" ;
};
String STR_QRY_ILLEGAL_JOIN
{
Text [ en-US ] = "Join could not be processed" ;
};
String STR_SVT_SQL_SYNTAX_ERROR
{
Text [ en-US ] = "Syntax error in SQL statement" ;
};
String STR_QUERYDESIGN_NO_VIEW_SUPPORT
{
Text [ en-US ] = "This database does not support table views.";
};
String STR_NO_ALTER_VIEW_SUPPORT
{
Text [ en-US ] = "This database does not support altering of existing table views.";
};
String STR_QUERYDESIGN_NO_VIEW_ASK
{
Text [ en-US ] = "Do you want to create a query instead?";
};
ErrorBox ERR_QRY_NOSTATEMENT
{
Message [ en-US ] = "No query could be created.";
};
ErrorBox ERR_QRY_NOCRITERIA
{
Message [ en-US ] = "No query could be created because no fields were selected.";
};
/*
The menubar resource has become obsolete - you can now find the menubar definition at: <project>/uiconfig/dbquery/menubar/menubar.xml
*/
String STR_DATASOURCE_DELETED
{
Text [ en-US ] = "The corresponding data source has been deleted. Therefore, data relevant to that data source cannot be saved.";
};
String STR_QRY_COLUMN_NOT_FOUND
{
Text [ en-US ] = "The column '$name$' is unknown.";
};
String STR_QRY_JOIN_COLUMN_COMPARE
{
Text [ en-US ] = "Columns can only be compared using '='.";
};
String STR_QRY_LIKE_LEFT_NO_COLUMN
{
Text [ en-US ] = "You must use a column name before 'LIKE'.";
};
String STR_QRY_CHECK_CASESENSITIVE
{
Text [ en-US ] = "The column could not be found. Please note that the database is case-sensitive.";
};
String STR_QUERYDESIGN
{
Text [ en-US ] = " - %PRODUCTNAME Base: Query Design";
};
String STR_VIEWDESIGN
{
Text [ en-US ] = " - %PRODUCTNAME Base: View Design";
};
String STR_QUERY_SAVEMODIFIED
{
Text [ en-US ] = "$object$ has been changed.\nDo you want to save the changes?" ;
Text [ x-comment ] = "For $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource will be inserted.";
};
String STR_ERROR_PARSING_STATEMENT
{
Text [ en-US ] = "$object$ is based on an SQL command which could not be parsed.";
Text [ x-comment ] = "For $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource "
"(except \"SQL command\", which doesn't make sense here) will be inserted.";
};
String STR_INFO_OPENING_IN_SQL_VIEW
{
Text [ en-US ] = "$object$ will be opened in SQL view.";
Text [ x-comment ] = "For $object$, one of the values of the RSC_QUERY_OBJECT_TYPE resource "
"(except \"SQL command\", which doesn't make sense here) will be inserted.";
};
Resource RSC_QUERY_OBJECT_TYPE
{
String 1
{
Text [ en-US ] = "The table view";
};
String 2
{
Text [ en-US ] = "The query";
};
String 3
{
Text [ en-US ] = "The SQL statement";
};
};
String STR_STATEMENT_WITHOUT_RESULT_SET
{
Text [ en-US ] = "The query does not create a result set, and thus cannot be part of another query.";
};
String STR_NO_DATASOURCE_OR_CONNECTION
{
Text [ en-US ] = "Both the ActiveConnection and the DataSourceName parameter are missing or wrong - cannot initialize the query designer.";
};