office-gobmx/include/editeng/boxitem.hxx
Stephan Bergmann 362d4f0cd4 Explicitly mark overriding destructors as "virtual"
It appears that the C++ standard allows overriding destructors to be marked
"override," but at least some MSVC versions complain about it, so at least make
sure such destructors are explicitly marked "virtual."

Change-Id: I0e1cafa7584fd16ebdce61f569eae2373a71b0a1
2014-04-01 19:22:54 +02:00

227 lines
9.8 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#ifndef INCLUDED_EDITENG_BOXITEM_HXX
#define INCLUDED_EDITENG_BOXITEM_HXX
#include <svl/poolitem.hxx>
#include <editeng/borderline.hxx>
#include <editeng/editengdllapi.h>
#include <com/sun/star/table/BorderLine2.hpp>
// class SvxBoxItem ------------------------------------------------------
/* [Description]
This item describes a border attribute
(all four edges and the inward distance)
*/
#define BOX_LINE_TOP ((sal_uInt16)0)
#define BOX_LINE_BOTTOM ((sal_uInt16)1)
#define BOX_LINE_LEFT ((sal_uInt16)2)
#define BOX_LINE_RIGHT ((sal_uInt16)3)
/**
This version causes SvxBoxItem to store the 4 cell spacing distances separately
when serializing to stream.
*/
#define BOX_4DISTS_VERSION ((sal_uInt16)1)
/**
This version causes SvxBoxItem to store the styles for its border lines when
serializing to stream.
*/
#define BOX_BORDER_STYLE_VERSION ((sal_uInt16)2)
class EDITENG_DLLPUBLIC SvxBoxItem : public SfxPoolItem
{
editeng::SvxBorderLine *pTop,
*pBottom,
*pLeft,
*pRight;
sal_uInt16 nTopDist,
nBottomDist,
nLeftDist,
nRightDist;
public:
TYPEINFO_OVERRIDE();
explicit SvxBoxItem( const sal_uInt16 nId );
SvxBoxItem( const SvxBoxItem &rCpy );
virtual ~SvxBoxItem();
SvxBoxItem &operator=( const SvxBoxItem& rBox );
// "pure virtual Methods" from SfxPoolItem
virtual bool operator==( const SfxPoolItem& ) const SAL_OVERRIDE;
virtual bool QueryValue( com::sun::star::uno::Any& rVal, sal_uInt8 nMemberId = 0 ) const SAL_OVERRIDE;
virtual bool PutValue( const com::sun::star::uno::Any& rVal, sal_uInt8 nMemberId = 0 ) SAL_OVERRIDE;
virtual SfxItemPresentation GetPresentation( SfxItemPresentation ePres,
SfxMapUnit eCoreMetric,
SfxMapUnit ePresMetric,
OUString &rText, const IntlWrapper * = 0 ) const SAL_OVERRIDE;
virtual SfxPoolItem* Clone( SfxItemPool *pPool = 0 ) const SAL_OVERRIDE;
virtual SfxPoolItem* Create(SvStream &, sal_uInt16) const SAL_OVERRIDE;
virtual SvStream& Store(SvStream &, sal_uInt16 nItemVersion ) const SAL_OVERRIDE;
virtual sal_uInt16 GetVersion( sal_uInt16 nFileVersion ) const SAL_OVERRIDE;
virtual bool ScaleMetrics( long nMult, long nDiv ) SAL_OVERRIDE;
virtual bool HasMetrics() const SAL_OVERRIDE;
const editeng::SvxBorderLine* GetTop() const { return pTop; }
const editeng::SvxBorderLine* GetBottom() const { return pBottom; }
const editeng::SvxBorderLine* GetLeft() const { return pLeft; }
const editeng::SvxBorderLine* GetRight() const { return pRight; }
const editeng::SvxBorderLine* GetLine( sal_uInt16 nLine ) const;
//The Pointers are being copied!
void SetLine( const editeng::SvxBorderLine* pNew, sal_uInt16 nLine );
sal_uInt16 GetDistance( sal_uInt16 nLine ) const;
sal_uInt16 GetDistance() const;
void SetDistance( sal_uInt16 nNew, sal_uInt16 nLine );
inline void SetDistance( sal_uInt16 nNew );
// Line width plus Space plus inward distance
// bIgnoreLine = TRUE -> Also return distance, when no Line is set
sal_uInt16 CalcLineSpace( sal_uInt16 nLine, bool bIgnoreLine = false ) const;
static com::sun::star::table::BorderLine2 SvxLineToLine( const editeng::SvxBorderLine* pLine, bool bConvert );
static bool LineToSvxLine(const ::com::sun::star::table::BorderLine& rLine, editeng::SvxBorderLine& rSvxLine, bool bConvert);
static bool LineToSvxLine(const ::com::sun::star::table::BorderLine2& rLine, editeng::SvxBorderLine& rSvxLine, bool bConvert);
};
inline void SvxBoxItem::SetDistance( sal_uInt16 nNew )
{
nTopDist = nBottomDist = nLeftDist = nRightDist = nNew;
}
// class SvxBoxInfoItem --------------------------------------------------
/* [Description]
Another item for the border. This item has only limited functionality.
On one hand, the general Dialog is told by the item which options it
should offer. On the other hand, this attribute may be used to
transported the borderline for the inner horizontal and vertical lines.
*/
#define BOXINFO_LINE_HORI ((sal_uInt16)0)
#define BOXINFO_LINE_VERT ((sal_uInt16)1)
#define VALID_TOP 0x01
#define VALID_BOTTOM 0x02
#define VALID_LEFT 0x04
#define VALID_RIGHT 0x08
#define VALID_HORI 0x10
#define VALID_VERT 0x20
#define VALID_DISTANCE 0x40
#define VALID_DISABLE 0x80
class EDITENG_DLLPUBLIC SvxBoxInfoItem : public SfxPoolItem
{
editeng::SvxBorderLine* pHori; //inner horizontal Line
editeng::SvxBorderLine* pVert; //inner vertical Line
bool mbEnableHor; /// true = Enable inner horizontal line.
bool mbEnableVer; /// true = Enable inner vertical line.
/*
Currently only for StarWriter: distance inward from SvxBoxItem. If the
distance is requested, then the field for the distance from the dialog be
activated. nDefDist is regarded as a default value. If any line is
turned on or will be turned on it must this distance be set to default.
bMinDist indicates whether the user can go below this value or not.
With NDIST is the current distance from the app transported back and
forth to the dialogue.
*/
bool bDist :1; // TRUE, Unlock Distance.
bool bMinDist :1; // TRUE, Going below minimum Distance is prohibited
sal_uInt8 nValidFlags; // 0000 0000
// 0000 0001 VALID_TOP
// 0000 0010 VALID_BOTTOM
// 0000 0100 VALID_LEFT
// 0000 1000 VALID_RIGHT
// 0001 0000 VALID_HORI
// 0010 0000 VALID_VERT
// 0100 0000 VALID_DIST
// 1000 0000 VALID_DISABLE
sal_uInt16 nDefDist; // The default or minimum distance.
public:
TYPEINFO_OVERRIDE();
explicit SvxBoxInfoItem( const sal_uInt16 nId );
SvxBoxInfoItem( const SvxBoxInfoItem &rCpy );
virtual ~SvxBoxInfoItem();
SvxBoxInfoItem &operator=( const SvxBoxInfoItem &rCpy );
// "pure virtual Methods" from SfxPoolItem
virtual bool operator==( const SfxPoolItem& ) const SAL_OVERRIDE;
virtual SfxItemPresentation GetPresentation( SfxItemPresentation ePres,
SfxMapUnit eCoreMetric,
SfxMapUnit ePresMetric,
OUString &rText, const IntlWrapper * = 0 ) const SAL_OVERRIDE;
virtual bool QueryValue( com::sun::star::uno::Any& rVal, sal_uInt8 nMemberId = 0 ) const SAL_OVERRIDE;
virtual bool PutValue( const com::sun::star::uno::Any& rVal, sal_uInt8 nMemberId = 0 ) SAL_OVERRIDE;
virtual SfxPoolItem* Clone( SfxItemPool *pPool = 0 ) const SAL_OVERRIDE;
virtual SfxPoolItem* Create(SvStream &, sal_uInt16) const SAL_OVERRIDE;
virtual SvStream& Store(SvStream &, sal_uInt16 nItemVersion ) const SAL_OVERRIDE;
virtual bool ScaleMetrics( long nMult, long nDiv ) SAL_OVERRIDE;
virtual bool HasMetrics() const SAL_OVERRIDE;
const editeng::SvxBorderLine* GetHori() const { return pHori; }
const editeng::SvxBorderLine* GetVert() const { return pVert; }
//The Pointers are being copied!
void SetLine( const editeng::SvxBorderLine* pNew, sal_uInt16 nLine );
bool IsTable() const { return mbEnableHor && mbEnableVer; }
void SetTable( bool bNew ) { mbEnableHor = mbEnableVer = bNew; }
inline bool IsHorEnabled() const { return mbEnableHor; }
inline void EnableHor( bool bEnable ) { mbEnableHor = bEnable; }
inline bool IsVerEnabled() const { return mbEnableVer; }
inline void EnableVer( bool bEnable ) { mbEnableVer = bEnable; }
bool IsDist() const { return bDist; }
void SetDist( bool bNew ) { bDist = bNew; }
bool IsMinDist() const { return bMinDist; }
void SetMinDist( bool bNew ) { bMinDist = bNew; }
sal_uInt16 GetDefDist() const { return nDefDist; }
void SetDefDist( sal_uInt16 nNew ) { nDefDist = nNew; }
bool IsValid( sal_uInt8 nValid ) const
{ return ( nValidFlags & nValid ) == nValid; }
void SetValid( sal_uInt8 nValid, bool bValid = true )
{ bValid ? ( nValidFlags |= nValid )
: ( nValidFlags &= ~nValid ); }
void ResetFlags();
};
#endif
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */