strepsirrhini/office-gobmx
9
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
office-gobmx/include/svx/svdomeas.hxx
Balazs Varga ebf13e8907 tdf#156857: sd ooxml import: fix shape size if spAutofit is set 
and the size of the shape from ooxml file is different then the
inew calculated by TextAutoGrowHeight.

Furthermore, no need to check and resize the shape size during
the spell checking.

Change-Id: Iffd15e02579942d4f5f20db73f2194f8298c0838
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/171621
Tested-by: Jenkins
Reviewed-by: Balazs Varga <balazs.varga.extern@allotropia.de>
Tested-by: Gabor Kelemen <gabor.kelemen.extern@allotropia.de>
2024-08-12 13:24:48 +02:00

201 lines
9.3 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#pragma once
#include <svx/svdotext.hxx>
#include <svx/svxdllapi.h>
#include <editeng/measfld.hxx>
class SdrOutliner;
struct ImpMeasureRec;
struct ImpMeasurePoly;
namespace sdr::properties {
class MeasureProperties;
}
class SdrMeasureObjGeoData final : public SdrTextObjGeoData
{
public:
Point aPt1;
Point aPt2;
public:
SdrMeasureObjGeoData();
virtual ~SdrMeasureObjGeoData() override;
};
class SVXCORE_DLLPUBLIC SdrMeasureObj final : public SdrTextObj
{
private:
// to allow sdr::properties::MeasureProperties access to SetTextDirty()
friend class sdr::properties::MeasureProperties;
friend class SdrMeasureField;
SAL_DLLPRIVATE virtual std::unique_ptr<sdr::contact::ViewContact> CreateObjectSpecificViewContact() override;
SAL_DLLPRIVATE virtual std::unique_ptr<sdr::properties::BaseProperties> CreateObjectSpecificProperties() override;
Point aPt1;
Point aPt2;
bool bTextDirty;
SAL_DLLPRIVATE void ImpTakeAttr(ImpMeasureRec& rRec) const;
SAL_DLLPRIVATE OUString TakeRepresentation(SdrMeasureFieldKind eMeasureFieldKind) const;
SAL_DLLPRIVATE void ImpCalcGeometrics(const ImpMeasureRec& rRec, ImpMeasurePoly& rPol) const;
SAL_DLLPRIVATE static basegfx::B2DPolyPolygon ImpCalcXPoly(const ImpMeasurePoly& rPol);
SAL_DLLPRIVATE void ImpEvalDrag(ImpMeasureRec& rRec, const SdrDragStat& rDrag) const;
void SetTextDirty()
{
bTextDirty=true;
SetTextSizeDirty();
if (!getOutRectangle().IsEmpty())
{
SetBoundRectDirty();
SetBoundAndSnapRectsDirty(/*bNotMyself*/true);
}
}
SAL_DLLPRIVATE void UndirtyText() const;
SAL_DLLPRIVATE virtual std::unique_ptr<SdrObjGeoData> NewGeoData() const override;
SAL_DLLPRIVATE virtual void SaveGeoData(SdrObjGeoData& rGeo) const override;
SAL_DLLPRIVATE virtual void RestoreGeoData(const SdrObjGeoData& rGeo) override;
public:
SAL_DLLPRIVATE SdrMeasureObj(SdrModel& rSdrModel);
// Copy constructor
SAL_DLLPRIVATE SdrMeasureObj(SdrModel& rSdrModel, SdrMeasureObj const & rSource);
SdrMeasureObj(
SdrModel& rSdrModel,
const Point& rPt1,
const Point& rPt2);
SAL_DLLPRIVATE virtual ~SdrMeasureObj() override;
SAL_DLLPRIVATE virtual void TakeObjInfo(SdrObjTransformInfoRec& rInfo) const override;
SAL_DLLPRIVATE virtual SdrObjKind GetObjIdentifier() const override;
virtual void TakeUnrotatedSnapRect(tools::Rectangle& rRect) const override;
SAL_DLLPRIVATE virtual rtl::Reference<SdrObject> CloneSdrObject(SdrModel& rTargetModel) const override;
SAL_DLLPRIVATE virtual OUString TakeObjNameSingul() const override;
SAL_DLLPRIVATE virtual OUString TakeObjNamePlural() const override;
SAL_DLLPRIVATE virtual basegfx::B2DPolyPolygon TakeXorPoly() const override;
SAL_DLLPRIVATE virtual sal_uInt32 GetHdlCount() const override;
SAL_DLLPRIVATE virtual void AddToHdlList(SdrHdlList& rHdlList) const override;
// special drag methods
SAL_DLLPRIVATE virtual bool hasSpecialDrag() const override;
SAL_DLLPRIVATE virtual bool beginSpecialDrag(SdrDragStat& rDrag) const override;
SAL_DLLPRIVATE virtual bool applySpecialDrag(SdrDragStat& rDrag) override;
SAL_DLLPRIVATE virtual OUString getSpecialDragComment(const SdrDragStat& rDrag) const override;
SAL_DLLPRIVATE virtual bool BegCreate(SdrDragStat& rStat) override;
SAL_DLLPRIVATE virtual bool MovCreate(SdrDragStat& rStat) override;
SAL_DLLPRIVATE virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd) override;
SAL_DLLPRIVATE virtual bool BckCreate(SdrDragStat& rStat) override;
SAL_DLLPRIVATE virtual void BrkCreate(SdrDragStat& rStat) override;
SAL_DLLPRIVATE virtual basegfx::B2DPolyPolygon TakeCreatePoly(const SdrDragStat& rDrag) const override;
SAL_DLLPRIVATE virtual PointerStyle GetCreatePointer() const override;
SAL_DLLPRIVATE virtual void NbcMove(const Size& rSiz) override;
SAL_DLLPRIVATE virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact) override;
SAL_DLLPRIVATE virtual void NbcRotate(const Point& rRef, Degree100 nAngle, double sn, double cs) override;
SAL_DLLPRIVATE virtual void NbcMirror(const Point& rRef1, const Point& rRef2) override;
SAL_DLLPRIVATE virtual void NbcShear(const Point& rRef, Degree100 nAngle, double tn, bool bVShear) override;
SAL_DLLPRIVATE virtual Degree100 GetRotateAngle() const override;
SAL_DLLPRIVATE virtual void RecalcSnapRect() override;
SAL_DLLPRIVATE virtual sal_uInt32 GetSnapPointCount() const override;
SAL_DLLPRIVATE virtual Point GetSnapPoint(sal_uInt32 i) const override;
SAL_DLLPRIVATE virtual bool IsPolyObj() const override;
SAL_DLLPRIVATE virtual sal_uInt32 GetPointCount() const override;
virtual Point GetPoint(sal_uInt32 i) const override;
SAL_DLLPRIVATE virtual void NbcSetPoint(const Point& rPnt, sal_uInt32 i) override;
SAL_DLLPRIVATE virtual rtl::Reference<SdrObject> DoConvertToPolyObj(bool bBezier, bool bAddText) const override;
SAL_DLLPRIVATE virtual bool BegTextEdit(SdrOutliner& rOutl) override;
SAL_DLLPRIVATE virtual const Size& GetTextSize() const override;
SAL_DLLPRIVATE virtual void TakeTextRect( SdrOutliner& rOutliner, tools::Rectangle& rTextRect, bool bNoEditText,
tools::Rectangle* pAnchorRect, bool bLineWidth = true ) const override;
SAL_DLLPRIVATE virtual void TakeTextAnchorRect(tools::Rectangle& rAnchorRect) const override;
SAL_DLLPRIVATE virtual void TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, tools::Rectangle* pViewInit, tools::Rectangle* pViewMin) const override;
SAL_DLLPRIVATE virtual EEAnchorMode GetOutlinerViewAnchorMode() const override;
SAL_DLLPRIVATE virtual void NbcSetOutlinerParaObject(std::optional<OutlinerParaObject> pTextObject, bool bAdjustTextFrameWidthAndHeight = true) override;
SAL_DLLPRIVATE virtual OutlinerParaObject* GetOutlinerParaObject() const override;
SAL_DLLPRIVATE virtual bool CalcFieldValue(const SvxFieldItem& rField, sal_Int32 nPara, sal_uInt16 nPos,
bool bEdit, std::optional<Color>& rpTxtColor, std::optional<Color>& rpFldColor, std::optional<FontLineStyle>& rpFldLineStyle, OUString& rRet) const override;
// #i97878#
SAL_DLLPRIVATE virtual bool TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& rPolyPolygon) const override;
SAL_DLLPRIVATE virtual void TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& rPolyPolygon) override;
};
// Creating:
// ~~~~~~~~~
// dragging reference point 1 to reference point 2 -> reference edge
//
// Defaults:
// ~~~~~~~~~~~~~
// dimension line and auxiliary dimension lines: solid black hairlines
// arrows : 2mm x 4mm
// text size
// ___
// | dimension | 2mm
// |<--------------------->|---
// | | 8mm
// | |
// Pt1============# Pt2-- <----reference edge (from Pt1 to Pt2)
// # # |___ <-excess length of the auxiliary dimension line(s)
// # #=========#
// # objected to be dimensioned #
// #=======================#
//
// Attributes:
// ~~~~~~~~~~
// 1. Where is the text: middle, right or left (default=automatic)
// 2. Text above or below the line or line broken by text (default=automatic)
// Default=8mm
// 3. The distance from the dimension line to the reference edge (= to the dimensioned object)
// 4. dimension line below the reference edge (default=no))
// 5. excess length of the auxiliary dimension lines beyond the reference edge (2x, default=0)
// 6. excess length of the auxiliary dimension lines past the dimension line (default=2mm)
// 7. distance between the auxiliary dimension line and the reference edge
//
// Dragging: Handle Shift
// ~~~~~~~~~
// - reference points SolidQuadHdl only the length
// 1.+2. Seizing the text
// 3.+4. Hdl on arrow (2x) SolidQuadHdl only the Bool
// 5. Hdl one end point CircHdl both lengths ?
// 6.+7. no dragging
//
// Open:
// ~~~~~~
// - radiuses (anchor as type immediately)
//
// Special:
// ~~~~~~~~
// Connecting to a maximum of two objects
// -> during Copy, etc. use the respective code of the connectors?!?
// this probably will be pretty complicated ...
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
Reference in a new issue View git blame Copy permalink